Console doesn't start on port 7003 .......

Hi, We have created different domains with different ports on
one single UNIX machine.I am trying to start the console after
I
started my server on port 7003. The weird thing is that the console
starts on port 7001 (the port of another aplication in mydomain
. From there I can manage also isddomain (switching between domains).
When I try to access the JNDI tree though it doesn't work saying
that the server is not running , even though it is. Do you think
there is a JNDI tree naming conflict between the domains?
Any ideas?
Thanx
K.

Couple of things to pay attention here:
1. It is dangerous to manage one active domain from another active
domain. It is like editing a config.xml file while domain is active. This
can result in iunspecified behavior as the admin server reads config.xml
ONLY at startup time and then it just writes to it, if you are managing a
dmoain from another domain's active server, you can loose the changes.
2. Check your admin server startup script. For each active domain, there
MUST be a different admin server. One admin server serves only one
domain. Looks like when you sre starting admin server you are using a
domain name for which admin server starts at port 7001 while you inetd to
start admin server for the domain that says that admin server's listen
port is 7003.
3. Post your startup scripts for all admin servers and managed servers
and I will clarify further.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Kirk Miles wrote:
Hi,
We have created different domains with different ports on one
single UNIX machine.I am trying to start the console after I started
my server on port 7003.
The weird thing is that the console starts on port 7001 (the port
of another aplication in mydomain . From there I can manage also
isddomain (switching between domains). When I try to access the
JNDI tree though it doesn't work saying that the server is not
running , even though it is. Do you think there is a JNDI tree
naming conflict between the domains?
Any ideas?
Thanx
K.

Similar Messages

Console doesn't start?

Hi
I installed WLS6.0 SP1 to NT4 SP6. Console doesn't start when I'm logged to
our domain. Dr. Watson reports application error in beaexec2.exe. When I'm
logged in as a local administrator console works fine. What's wrong?
Seppo

I am having the same Problem.Can anyone give some suggestions

Sun Oner Application Server 7 Admin Console doesn't start

When I start the Admin Console for Sun One Application Server 7, and after I login, the admin console doesn't display in the browser. I have tried starting the admin console with IE and Netscape browser, but the admin console has failed to start in either IE or netscape.

-Type this in your IE
http://localhost:4848
-IF it does not work type the following
http://kishan:4848 ("kishan" is your machine name)
-IF it does not work do the following
Forgot the Admin Server Port Number? If you do not remember the HTTP server port number of the administrative server, you can inspect the administrative server's configuration file to determine the HTTP server port number.
1. Navigate to the <domain_config_dir>/domain1/admin-server/config/ directory.
2. Open the server.xml file in your favorite editor. Look for the element:
<http-listener id="http-listener-1" address="0.0.0.0" port="4848"...
In this case, port 4848 is the HTTP port number in use.
Forgot the Username or Password? If you do not remember the administrative user name that was supplied during installation, try the user name "admin". This is the default user name specified in the server configuration dialog during installation. If you still cannot determine the user name, look in the following file:
<domain_config_dir>/domain1/admin-server/config/admpw
This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.
Port Not Accessible? If the connection was refused when attempting to contact the administrative server's admin console application, it is likely that the administrative server is not running. Go back to the beginning of this section and double check the your startup procedures and the content of the administrative server's log file to determine the reason why the server is not running.

OAS 10.1.2 / chgiphost / EM-Console doesn't start after change of hostname

Hello!
I changed on my OAS 10.1.2 ip-address and hostname with script /$ORACLE_HOME/chgip/chgiphost.sh -mid.
But I can't start em-console and get the following error in em-application.log:
Portal Configuration Interface failed to initialise:
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: newHostname.domain:cn=oldHostname.domain...
It seem's that chgiphost.sh script doesn't change em-console configuration.
Any ideas?
regards
Harald.

Solution:
I secured Enterprise Mangager (HTTPS, emctl secure...).
First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
regards
Harald.

DNS/DHCP Management Console doesn't start

Folks,
I am running the DNS/DHCP Management Console in an old Windows XP Pro SP2 computer, and it works fine. But when I install it in my XP Pro SP3 computer it refuses to start. It stucks at the welcome screen with the globe animation and doesn't go any further. And there is also no apparent program or process to kill in the Task Manager, and the CPU util is zero. I have to log out and back in again to get rid of the welcome screen.
I am wondering if it may have something to do with the Java Runtime Environment (JRE)? I am using the latest version in my SP3 machine, where it doesn't work, and a much older version in my SP2 machine, where it works. I have not upgraded Java in that machine because I am afraid that the Management Console might stop working... If Java is the source of the problem, is it impossible to get it to work with a newer Java?
PJ

I wrote a TID on this, but it hasn't shown up yet. It is TID 7016049
As I am still waiting for it to show up on the public site, I will populate the resolution portion of the TID here. Hope it helps:
Despite uninstalling all older versions of Java, a remnant of the old install still exists. The offending file is javaw.exe, but there may also be a java.exe in the same location.
In the C:\Windows\SysWOW64 directory there may be a javaw.exe and java.exe from a previous installation. Check the properties > details tab of the file to confirm the version. If this javaw.exe is found first then Windows is directed to look in the wrong location in the registry for the Java Runtime Environment key. Once removed the javaw.exe from C:\Program Files\Java\JRE1.8.0_25\bin directory is found, which sends Windows down the correct path to find the necessary key in the registry.
Once the older version of javaw.exe is removed, the JMC should load.
The SysWOW64 directory is for 64-bit machines. If this error is being encountered on a 32 bit machine, then the superfluous javaw.exe must be found and removed. Process Monitor for Windows can be downloaded and utilized to track down the superfluous javaw.exe. As the java.exe is also superfluous, we recommend removing it to (or copy it out to a backup directory until testing is complete).

Weblogic console doesn't start

Hi all,
Sorry if this is a wrong place...I am new to weblogic.
I have weblogic 9.2 installed in my PC and I tried to configure servers in the console and I restarted the weblogic server.
Now when i try to log into localhost:7001/console it says
"+*A serious condition has been detected which prevents the proper operation of the Weblogic Administration Console.*+
+*It's likely that this condition is the result of a configuration problem. See the log files for more information.*+"
can anybody please help me in resolving this issue.
Thanks in advance
Regards,
Sree.

From the logs, I could find the below lines:
-- Reference to MAXIMOUI1 by *[maximo_domain]/JDBCSystemResources[jmsqueuedatasource]/Targets is ambigous;*
The following beans share this name:
*- weblogic.management.configuration.ServerMBeanImpl@a862d569([maximo_domain]/Servers[MAXIMOUI1])*
*- weblogic.management.configuration.ClusterMBeanImpl@a862d568([maximo_domain]/Clusters[MAXIMOUI1])*
-- Reference to MAXIMOUI2 by *[maximo_domain]/JDBCSystemResources[jmsqueuedatasource]/Targets is ambigous;*
The following beans share this name:
*- weblogic.management.configuration.ServerMBeanImpl@a862d568([maximo_domain]/Servers[MAXIMOUI2])*
*- weblogic.management.configuration.ClusterMBeanImpl@a862d569([maximo_domain]/Clusters[MAXIMOUI2])*
Looks like there is some issue with the configuration you have done. From the error, looks like the jdbc/jms resource are conflicting among the servers and clusters.
Can you retry the steps again and post your results?
Thanks,
Patrick

The app console doesn't match. It gives error -1712

THE app console doesn't match. It gives erro -1712. The store has already changed the memory

Try using Google's DNS instead of the one your IPS is providing.
- To change on the iPod go to Settings>wifi and change the DNS to 8.8.8.8
- For the computer see:
Public DNS — Google Developers
- Did anything happen to your router right before this started? Maybe the router is blocking the port used.

Help: Pointbase db doesn't start when launching SP4 portal

Hi,
I downloaded WL platform SP4 today and installed (before the installation I uninstalled SP2)in my laptop. When I launch the examples portal, the pointbase db doesn't start. I tried both SP2 and SP3 in my laptop and both worked. The error messages below are directly copied from the console. My understanding is the portal server startup will automatically start pointbase db (I didn't do any configuration yet). Anybody know the problem and solution?
My laptop config:
Win XP, SP2, 1.6 GHz, 1GB memory
I am the admin user.
Thanks a lot!!
Error messages from the launching console:
<Jul 6, 2005 6:00:54 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "cgPool": SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
<Jul 6, 2005 6:01:28 PM PDT> <Warning> <JDBC> <BEA-001129> <Received exception w
hile creating connection for pool "portalPool": SQL-server rejected establishmen
t of SQL-connection. Pointbase Server may not be running on localhost at port 90
93.>
<Jul 6, 2005 6:01:34 PM PDT> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer"
store failed to open java.io.IOException: JMS JDBC store, connection pool = <cg
JMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>

The exception doesn't tell me much more than the DB connection / pool couldn't connect to the db.
Sometimes solving these types of problems where it should work, this works everywhere else, so what could be wrong here... Let me suggest that you install a new domain using a new root directory. IE c:\bea814 and not reuse c:\bea.
I'm guessing that an essential script or property file was not overwritten by the 814 install.
JBTW, 814 pointbase is a new version and is run on a new port from prior 8.x versions, the new port is 9093, where prior versions was 9092.
A diag. is after you start via, startWebLogic.cmd, to open a DOS window and run this command:
netstat -an
Look for a LISTEN on port 9093
This would confirm that 814's pointbase is started and there's a configuration issue with the connection pools.
Good luck, curt

QSynth doesn't create jack port.

I have a problem with QSynth - it doesn't create jack port, so i can't connect it to output. When i run fluidsynth from console it works properly - it creates output, I connect it to "system" port using QJackCtl and i can hear midi sound, but i really ned QSynth. Please help me.
Messages from QSynth:
15:11:57.027 Qsynth1: Creating synthesizer engine...
15:11:57.058 Qsynth1: Loading soundfont: "/usr/share/soundfonts/fluidr3/FluidR3GM.SF2" (bank offset 0)...
15:11:57.281 Qsynth1: Creating audio driver (jack)...
15:11:57.294 Qsynth1: Creating MIDI router (alsa_seq)...
15:11:57.295 Qsynth1: Creating MIDI driver (alsa_seq)...
15:11:57.296 Qsynth1: Creating MIDI player...
15:11:57.298 Qsynth1: Synthesizer engine started.
15:11:57.298 Qsynth1: fluid_synth_set_gain(0.97)
15:11:57.299 Qsynth1: fluid_synth_set_reverb(0.2,0.5,10,0.1)
15:11:57.299 Qsynth1: fluid_synth_set_chorus(3,1,0.3,8,0)
fluidsynth: warning: Failed to pin the sample data to RAM; swapping is possible.
fluidsynth: prog 0 0 0
fluidsynth: prog 1 0 0
//............. some lines like above and bellow
fluidsynth: prog 14 0 14
fluidsynth: prog 15 0 15
zombified - calling shutdown handler
fluidsynth: error: Help! Lost the connection to the JACK server
Last edited by dawidmt (2011-08-26 13:20:17)

Sorry about the necro, but did you ever figure this out? I'm running into the same issue. I think *something* is being written because when I do "efibootmgr -c blahblah", and then I do an efibootmgr -v afterward, I can see the device path that shows up in the verbose options. Then, when I reboot, I don't see the new boot option in the menu, and when I check again via a livecd (which boots via UEFI, by the way), efibootmgr -v shows "Vendor(99e275e7-75a0-4b37-a2e6-c5385e6c00cb,)" in the extra info next to the boot option I had previously created. That vendor and GUID seem to show up when there's no path, as I've googled it and have seen similar readouts that imply such based on the context of where I saw them.
Anyway, help.
Thanks.
-TJ

J2EE server doesn't start (has been starting..) EP6SP9 on Windows XP Pro.

I am trying to install EP6 SP9 sneak preview edition. Just I followed the instructions.
Installation is successful. After that I installed PDK6(6090) using SDM. I also exported initial data objects to SLD.
When I restart the from SAPMMC console, jcontrol.exe has been in "starting" state(indicating with yellow color). It doesn't start even afer couple of hours.
Excerpt from <i>dev_jcontrol</i>
JStartupStartJLaunch: program = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:usrsapJ2EJC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
-> arg[02] = -DSAPINFO=J2E_00_server
-> arg[03] = -file=C:usrsapJ2EJC00j2eeclusterinstance.properties
-> arg[04] = -nodeName=ID5454450
-> arg[05] = -nodeId=1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2772
-> arg[07] = -jvmOutFile=C:usrsapJ2EJC00workjvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=C:usrsapJ2EJC00workstd_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=C:usrsapJ2EJC00workdev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=C:usrsapJ2ESYSprofileJ2E_JC00_epsystem
-> lib path = PATH=C:j2sdk1.4.2_08jrebinserver;C:j2sdk1.4.2_08jrebin;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
-> exe path = PATH=C:j2sdk1.4.2_08bin;C:usrsapJ2EJC00j2eeos_libs;c:sapdbprogramsbin;c:sapdbprogramspgm;C:usrsapPython.;C:oracleora92bin;C:Program FilesOraclejre1.3.1bin;C:Program FilesOraclejre1.1.8bin;C:WINDOWSsystem32;C:WINDOWS;C:WINDOWSSystem32Wbem;C:Program FilesATI TechnologiesATI Control Panel;C:j2sdk1.4.2_08bin;C:softwaresnmap-3.81;C:usrsapJ2ESCS01exe;C:usrsapJ2EJC00exe;C:usrsapJ2ESYSexerun
[Thr 2776] JControlICheckProcessList: process server0 started (PID:4304)
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:46:50 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:46:55 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:00 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:10 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:15 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:21 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:26 2005
[Thr 3696] *** ERROR => MsIAttachEx: NiBufConnect to epsystem/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3696] *** WARNING => Can't reconnect to message server (epsystem/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3696] Thu Jul 07 09:47:31 2005
[Thr 3696] JControlMSConnect: reconnected to message server (epsystem/3601)
[Thr 3696] Thu Jul 07 09:52:17 2005
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 3696] Thu Jul 07 09:57:24 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:02:25 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:07:45 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:12:46 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:18:06 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:23:07 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 3696] Thu Jul 07 10:28:27 2005
[Thr 3696] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
(Same lines repeated for every 5 minutes)
MMC shows that all processes are running inclucing the message server
C:usrsapJ2EJC00j2eeclusterinstance.properties
ID5454400.ClassPath=./bin/boot/boot.jar:./bin/system/bytecode.jar:.
ID5454400.Debuggable=no
ID5454400.JLaunchParameters=
ID5454400.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -XX:NewSize=28m -XX:MaxNewSize=28m Xms170m -XX:+DisableExplicitGC -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
ID5454400.LogName=dispatcher
ID5454400.MainClass=com.sap.engine.boot.Start
ID5454400.MaxHeapSize=170
ID5454400.Name=dispatcher
ID5454400.Parameters=
ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/dispatcher
ID5454400.Type=dispatcher
ID5454450.ClassPath=./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
ID5454450.DebugMode=no
ID5454450.DebugPort=50021
ID5454450.Debuggable=no
ID5454450.JLaunchParameters=
ID5454450.JavaParameters=-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+UseParNewGC -Xms512M -Xmx512M -XX:MaxNewSize=85M -XX:NewSize=85M -XX:+DisableExplicitGC -XX:MaxPermSize=192M -XX:PermSize=192M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=C:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global/
ID5454450.LogName=server0
ID5454450.MainClass=com.sap.engine.boot.Start
ID5454450.MaxHeapSize=512
ID5454450.Name=server0
ID5454450.Parameters=
ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster/server0
ID5454450.Type=server
bootstrap.ClassPath=./bootstrap/launcher.jar
bootstrap.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap.MaxHeapSize=128
bootstrap.Name=bootstrap
bootstrap.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0054544
bootstrap.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap.Type=bootstrap
bootstrap_ID5454400.ClassPath=./bootstrap/launcher.jar
bootstrap_ID5454400.JLaunchParameters=
bootstrap_ID5454400.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap_ID5454400.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap_ID5454400.MaxHeapSize=170
bootstrap_ID5454400.Name=dispatcher bootstrap
bootstrap_ID5454400.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454400
bootstrap_ID5454400.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap_ID5454400.Type=bootstrap
bootstrap_ID5454450.ClassPath=./bootstrap/launcher.jar
bootstrap_ID5454450.JLaunchParameters=
bootstrap_ID5454450.JavaParameters=-Djco.jarm=1 -Djco.jarm=1
bootstrap_ID5454450.MainClass=com.sap.engine.offline.OfflineToolStart
bootstrap_ID5454450.MaxHeapSize=512
bootstrap_ID5454450.Name=server0 bootstrap
bootstrap_ID5454450.Parameters=com.sap.engine.bootstrap.Bootstrap ./bootstrap ID005454450
bootstrap_ID5454450.RootPath=C:/usr/sap/J2E/JC00/j2ee/cluster
bootstrap_ID5454450.Type=bootstrap
instance.enabled=yes
instance.install.dir=C:usrsapJ2EJC00j2ee
instance.ms.host=epsystem
instance.ms.port=3601
instance.osLibsPath=C:/usr/sap/J2E/JC00/j2ee/os_libs
instance.runAction=NONE
instance.runMode=NORMAL
<i>syslog</i> has lot of error messages:
SAP Basis System: Operating system call           recv failed (error no. 10054)
When I counter this problem, I uninstalled and installed again. Still same problem persists.
Any ideas?
Thanks

Real problem is log is full.
To overwrite the log files run this:
dbmcli [-n <hostname>] -d <databasename> -u <dbmuser>,<dbmuserpw> util_execute set log auto overwrite on
Default MaxDB installation accepts (control, control) for (username, passwd)
How to overwrite/remove log files?

SAP doesn't start

Since 4 weeks we've the problem that our sap doesn't start if we are using our SAPMMC console.
We receive the attached message in the dev_disp log.
The restart of our sap system is only possible after we've restarted the complete server.
The operating system is windows NT with MSQL Database
trc file: "dev_disp", trc level: 1, release: "700"
sysno      01
sid        P08
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    185
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        11684
Sat Mar 28 06:50:41 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 11684) [dpxxdisp.c   1285]
            shared lib "dw_xml.dll" version 185 successfully loaded
            shared lib "dw_xtc.dll" version 185 successfully loaded
            shared lib "dw_stl.dll" version 185 successfully loaded
            shared lib "dw_gui.dll" version 185 successfully loaded
            shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sat Mar 28 06:50:46 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sdet3029_P08_01                         <
DpShMCreate: sizeof(wp_adm)              64832   (1752)
DpShMCreate: sizeof(tm_adm)              58861440          (29416)
DpShMCreate: sizeof(wp_ca_adm)                     80000   (80)
DpShMCreate: sizeof(appc_ca_adm)     160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm)                     2208080            (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)                      0          (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)              0          (72)
DpShMCreate: sizeof(vmc_adm)                        0          (1864)
DpShMCreate: sizeof(wall_adm)             (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
*** ERROR => DpShMCreate: ShmCreate for key SHM_DP_ADM_KEY failed (4) [dpxxtool2.c 2407]
*** ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c 462]
*** DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
*** DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Mar 28 06:50:51 2009
NiISelect: TIMEOUT occured (5000ms)
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c   438]
---- C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App       : dispwork.EXE (pid=11684)+
When      : 3/28/2009 6:50:51.328
Threads   : 2
Computer Name       : SDET3029
User Name           : SAPServiceP08
Number of Processors: 8
Processor Type: EM64T Family 6 Model 23 Stepping 6
Windows Version     : 5.2 Current Build: 3790
State Dump for Thread Id 2184
--> (FAULT) Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
0000000007fcf3d0 0000000000419ff3 0000000003b44501 dispwork!DpHalt [dpxxdisp.c (10297)]+
0000000007fcfc10 000000000041e8ab 00000000027135e0 dispwork!DpFatalErr [dpxxdisp.c (18668)]+
0000000007fcfeb0 000000000042feb0 0000000000000000 dispwork!DpSapEnvInit [dpxxdisp.c (1446)]+
0000000007fcfee0 000000000040108d ffffffff00000002 dispwork!DpMain [dpxxdisp.c (1115)]+
0000000007fcff10 00000000019e63f1 0000000000000000 dispwork!nlsui_main [thxxanf.c (84)]+
0000000007fcff70 0000000077d5964c 0000000000000000 dispwork!wmainCRTStartup [crtexe.c (498)]+
0000000007fcffa0 0000000000000000 00000000019e6280 kernel32!BaseProcessStart
State Dump for Thread Id 1d7c
--> Stack Back Trace <--
FramePtr         ReturnAd         Param#1          Function Name
000000000f2afe40 0000000077d5f691 00000000080691e0 ntdll!NtFsControlFile
000000000f2afeb0 00000000018cbfaf 0000000000000000 kernel32!ConnectNamedPipe
000000000f2aff40 000007ff7fc411c4 0000000000000000 dispwork!SigIMsgFunc [signt.c (679)]+
000000000f2aff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
000000000f2affa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
call clean-up function ...
SigICallExitRoutine: call exithandler (DpHalt)

Hi,
Please check your network connectivity. Also did you try to start from command line?
> startsap.exe name=<SID> nr=<sysNumber> sapdiahost=<Hostname>
Hope this helps.
Manoj

Listener doesn't start

Hi
I´ve configured my listener as automatic in my windows service console but when i restart my server the listener doesn´t start.
What can i do??
Thanks.

the contents of my listener.ora file:
26-SEP-2005 08:39:06 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ORCL.WRLD)(CID=(PROGRAM=C:\WINNT\system32\dllhost.exe)(HOST=APLICATIVO)(USER=Administrador))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.80)(PORT=2704)) * establish * ORCL.WRLD * 0
26-SEP-2005 08:39:12 * service_update * ORCL * 0
26-SEP-2005 08:39:45 * service_update * ORCL * 0
26-SEP-2005 08:49:48 * service_update * ORCL * 0
26-SEP-2005 09:19:57 * service_update * ORCL * 0
26-SEP-2005 09:35:19 * service_update * ORCL * 0
Ya no se está recibiendo de: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aplicativo)(PORT=2100))(Presentation=FTP)(Session=RAW))
Ya no se está recibiendo de: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aplicativo)(PORT=8080))(Presentation=HTTP)(Session=RAW))
26-SEP-2005 09:35:22 * service_died * ORCL * 12537
TNSLSNR for 32-bit Windows: Version 10.1.0.3.0 - Production on 26-SEP-2005 10:07:43
Copyright (c) 1991, 2004, Oracle. All rights reserved.
El archivo de parámetros del sistema es C:\ora10_infra\network\admin\listener.ora
Mensajes de log escritos en C:\ora10_infra\network\log\listener.log
Información de rastreo escrita en C:\ora10_infra\network\trace\listener.trc
El nivel de rastreo actual es 0
Iniciado con Pid=972
Recibiendo en: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aplicativo)(PORT=1521)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
26-SEP-2005 10:07:46 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Administrador))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168821504)) * status * 0
Recibiendo en: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aplicativo)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Recibiendo en: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=aplicativo)(PORT=2100))(Presentation=FTP)(Session=RAW))
26-SEP-2005 10:08:23 * service_register * ORCL * 0
26-SEP-2005 10:08:44 * service_update * ORCL * 0
26-SEP-2005 10:09:50 * service_update * ORCL * 0
26-SEP-2005 10:10:56 * service_update * ORCL * 0
26-SEP-2005 10:12:02 * service_update * ORCL * 0
26-SEP-2005 10:12:35 * service_update * ORCL * 0
26-SEP-2005 10:13:42 * service_update * ORCL * 0
26-SEP-2005 10:14:15 * service_update * ORCL * 0
26-SEP-2005 10:15:21 * service_update * ORCL * 0

Integrated wls doesn't start

Hi,
I'm using JDev 11.1.1.3.
I was working normally but suddenly the integrated wls doesn't start anymore.
When I start the server, the log stops here
<Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Although the log says "RUNNING", the server is not running. If I test, through the server properties, all tests fail, except the HTTP.
I tried to delete the cache folder and re-install the middleware... the problem remains.
Thanks.

Hi,
bellow follows the entire log.
I can't launch the console... the log shows this message "<Logger><error> ServletContainerAdapter manager not initialized correctly."
*** Using port 7101 ***
D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;D:\ORACLE\PRODUCT\10.2.0\CLIENT_3\BIN;D:\ORACLE\PRODUCT\10.2.0\CLIENT_2;C:\Windows\SYSTEM32;C:\Windows;C:\Windows\SYSTEM32\WBEM;C:\Windows\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;C:\PROGRAM FILES\TORTOISESVN\BIN;C:\Oracle\Middleware\jdeveloper\jdev\bin;C:\Oracle\Middleware\jdeveloper\ant\bin;C:\Oracle\Middleware\jdk160_14_R27.6.5-32\bin;C:\Program Files\QuickTime\QTSystem\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware3\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=proxy.link.pt -Dhttp.proxyPort=3128 "-Dhttp.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dhttps.proxyHost=proxy.link.pt -Dhttps.proxyPort=3128 "-Dhttps.nonProxyHosts=*.msdev.pt|*.linkcom.pt|*sgps*|*sonae*|*mch*|172.20.*.*|*.nvsd.local|192.168.*.*|194.117.36.*|*.aitec.pt|*.link.pt|localhost|localhost.localdomain|127.0.0.1|::1|pwpmedeiros.aitec.pt|pwpmedeiros" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\JDEVCA~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<30/Ago/2011 18H01m BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30/Ago/2011 18H01m BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<30/Ago/2011 18H01m BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320400> <The log file D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30/Ago/2011 18H01m BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in D:\JDevCache\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<30/Ago/2011 18H01m BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:289b:22c3:bcf6:2bce:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Warning> <Server> <BEA-002611> <Hostname "pwpmedeiros.aitec.pt", maps to multiple IP addresses: 169.254.251.192, 192.168.59.64, 192.168.181.1, 192.168.159.1, fe80:0:0:0:8935:43d7:b990:fbc0%17, fe80:0:0:0:289b:22c3:bcf6:2bce%18, fe80:0:0:0:e437:fbfb:c9ee:9352%19>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.59.64:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.159.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.181.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:5efe:c0a8:b501:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:e437:fbfb:c9ee:9352:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 169.254.251.192:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:8935:43d7:b990:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:f102:6891:b891:3efd:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a9fe:fbc0:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:3b40:7101 for protocols iiop, t3, ldap, snmp, http.>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30/Ago/2011 18H01m BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

Remote Update Manager on Yosemite doesn't start

Hi to all, I have recently updated my 15 iMac (year 2012) to Yosemite.
After the upgrade, the Adobe Remote Update Manager tool doesn't start, with an error 1.
In the console, I see these lines:
Any suggestions?
Many thanks

Same problem here on my wife's mid-2012 Macbook Air. Really annoying.

Xorg doesn't start after update

After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)

sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23)

Console doesn't start on port 7003 .......

Similar Messages

Maybe you are looking for