Console filling with "FireWire GUID 0000000000000000 is invalid!"

Hello all. I would appreciate any help I can get. I know just enough to be a danger to my system.
Im on my 2.4 Ghz Core 2 Duo MacBook Pro. 4 GB mem, OSX 10.7.5. Software is up to date as of yesterday.
Here's the problem. When I wake machine up, within a minute it slows to a crawl, throwing beachballs all over. When it catches up to itself, it still runs slower than normal. Then I can hear the drive being written on, prompting me to check console.I get this message:
8/16/13 12:02:15.000 PM kernel: FireWire GUID 0000000000000000 is invalid!
It repeats every 5 seconds, never ending until a restart.
It DOESN'T happen all the time. VERY intermittent, and haven't been able to recreate it on purpose.
Today, I had an external drive plugged into the firewire 800 port. Normally, I do not.
System info:
Hardware Information:
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Startup Items:
          ProTec6b - Path: /Library/StartupItems/ProTec6b
System Software:
          Mac OS X 10.7.5 (11G63b) - Uptime: 0 days 0:27
Disk Information:
          FUJITSU MHW2160BHPL disk0 : (160.04 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Sarah's (disk0s2) /: 159.18 GB (30.8 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. Built-in iSight
          Apple Inc. Bluetooth USB Host Controller
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
          WD My Book 111D 800mbit - 800mbit max
                    disk1s1 (disk1s1) <not mounted>: 209.7 MB
                    MacBook (disk1s2) /Volumes/MacBook: 249.91 GB (138.97 GB free)
                    Recovery HD (disk1s3) <not mounted>: 650 MB
                    MacPro (disk1s4) <not mounted>: 250 GB
                    BIG External (disk1s5) /Volumes/BIG External: 2.5 TB (2.08 TB free)
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 3876
          com.wdc.driver.1394_64HP          Version: 1.0.0
Problem System Launch Daemons:
             [not loaded]          ftp-proxy.plist
Problem System Launch Agents:
                 [failed] com.apple.mrt.uiagent.plist
Launch Daemons:
                 [loaded] at.obdev.littlesnitchd.plist
                 [loaded] com.adobe.SwitchBoard.plist
                 [loaded] com.bombich.ccc.plist
                 [loaded] com.chickenbyte.IconBoxHelper.plist
Launch Agents:
                 [loaded] at.obdev.LittleSnitchUIAgent.plist
             [not loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.extensis.FMCore.plist
                 [loaded] com.wacom.pentablet.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          BambooCore
3rd Party Preference Panes:
          Default Folder X
          DivX
          Flash Player
          Flip4Mac WMV
          FUSE for OS X (OSXFUSE)
          PenTablet
Internet Plug-ins:
          AdobePDFViewer.plugin
          DivXBrowserPlugin.plugin
          EPPEX Plugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          GarminGpsControl.plugin
          Google Earth Web Plug-in.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
          VLC Plugin.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Move-Media-Player.plugin
Bad Fonts:
          None
Top Processes:
          3.9   %          WindowServer
          2.8   %          EtreCheck
          2.2   %          Finder
          0.6   %          hidd
          0.0   %          fontd
          0.0   %          ODSAgent
console log:
Thanks.

I received this from Akitio/Thunder Dock Support
"Thank you for your feedback. We are aware of this problem and yes, it happens when the system comes out of sleep mode and the Thunder Dock is connected to your system. It does not affect the functionality of the product but it does tend to fill up the console with error messages.
Unfortunately, we cannot fix this with a simple firmware or driver update and you would have to return the product to us, so that we can replace it.
Thanks for your help

Similar Messages

  • In Console every 10 seconds: "FireWire GUID ffffffffffffffff is invalid!"

    Subject says it.
    Any ideas on what this is all about?
    FireWire GUID ffffffffffffffff is invalid!

    Which Mac?
    Have you tried resetting the FW bus?
    Information on resetting the bus can be found in the 5 steps listed here.

  • /var/log/system.log - kernel[0]: FireWire GUID fffffffffeffffff is invalid!

    Recently been seeing the following kernel messages within /var/log/syslog.log file however no FireWire devices are connected. There's been not impact on the system performance when FireWire davices(iPod 3G & 30Gb HD via FW enclosure) are connected and being used. Any ideas were these messages are coming from.
    Jun 2 12:09:44 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:49 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:54 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:59 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:04 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:09 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:14 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:19 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:24 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:29 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:34 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:39 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:44 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    iMac 20" Intel Duo (2Ghz, 250Gb, 1Gb, 256Mb VRAM)   Mac OS X (10.4.9)   PowerBook G4 667Mhz (DVI);iPod 15Gb (3G);iMac Rev.B

    I'm having a hard time analyzing where this problem come from.
    Immediately after upgrading to 10.4.11, I thought the messages had disappeared and my hard drive was finally working correctly. I mounted it correctly and transferred about 7GB with no problem at all.
    However, some time later I connected the hard drive again and got a hard crash (finder, the applications freeze with no recovery => hard reboot). This was while the console was outputting the "Firewire GUID XXX is invalid!" message.
    Hardware Test returns no error. Here is a sample log I got when connecting the drive, a while back:
    Oct 18 07:08:43 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:08:48 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    <repeated every 5s>
    Oct 18 07:09:48 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:09:49 Totoro kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-296.4.0/AppleFWOHCI.cp
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: jnl: dojnlio: strategy err 0x5
    Oct 18 07:09:52 Totoro kernel[0]: jnl: end_transaction: only wrote 0 of 37376 bytes to the jo
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:53 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: HFS: err 6 reading VH blk (Olympe)
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: HFS: err 6 reading VH blk (Olympe)
    Oct 18 07:09:56 Totoro kernel[0]: jnl: flushing fs disk buffer returned 0x6
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: jnl: dojnlio: strategy err 0x6
    Oct 18 07:09:56 Totoro kernel[0]: jnl: writejournalheader: error writing the journal header
    Oct 18 07:09:57 Totoro kernel[0]: jnl: close: journal 0x3aefc98, is invalid. aborting outsta
    Oct 18 07:09:58 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:10:03 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:10:08 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    <repeated every 5s>
    Oct 18 07:12:08 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:12 Totoro kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-296.4.0/AppleFWOHCI.cp
    Oct 18 07:12:13 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:18 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:23 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    At this point I think it might be a problem with the firewire hardware on my macbook, but I have no certainty...
    Any ideas ? Shall I return my laptop to a repair center ?

  • Mac Pro Early 2008 problems with firewire 400 drives

    I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
    Maxtor OneTouch III 750GB
    Acomdata enclosure/Seagate 400GB
    LaCie d2/160GB
    LaCie w/Lightscribe DVD
    I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
    In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
    Thanks in advance for any counsel.

    I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
    Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
    Don't forget to test your drives with Disk Warrior (4.1) also.
    750GB WD Caviar is $139 SATA.
    http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
    Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
    Never had trouble with OWC enclosures:
    http://www.macsales.com/firewire/

  • Macbook Pro 13" screen fills with snow.

    Any help would be appreciated here.
    My wife's 13" Macbook Pro is experiences a curious problem. While she is working on it, the screen will just fill with snow. It looks like an old analog TV tuned in between channels. This is the LCD dispaly of the Macbook, not an external monitor. We've had the computer from new, and have yet to experience any problems.
    It is an Intel I5, 2.3MHz, 4GB DDR3 RAM, Intel HD 3000 graphics, 384MB, SATA HD, running Mac OS X Lion 10.7.5 on a 13" screen, resolution 1280x800.
    She has to shut down the computer and re-start it to continue using it. Sometimes, she has to let it sit for a while in order to get it to restart. I'm thinking it could be an overheating issue in the chipset, or perhaps a memory or hard drive problem, but I'm not sure. When she last restarted, the system reported this message:
    Interval Since Last Panic Report:  15545233 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    E8F98740-A1EC-4FB6-927D-AD7E9BE630C9
      Tue Dec 31 09:49:29 2013
    Machine-check capabilities (cpu 1) 0x0000000000000c07:
    family: 6 model: 42 stepping: 7 microcode: 26
    Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
    7 error-reporting banks
    threshold-based error status present
    extended corrected memory error handling present
    Machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
    IA32_MC4_STATUS(0x411): 0xb200000000020402 valid
      MCA error code:            0x0402
      Model specific error code: 0x0002
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    panic(cpu 3 caller 0xffffff80002c4dd5): "Machine Check at 0xffffff7f817a7c7f, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010d77add8, CR3: 0x0000000000100000, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000031, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff807f453d80, RBP: 0xffffff807f453db0, RSI: 0x0000000000000007, RDI: 0xffffff800a66e000\n" "R8:  0xffffff800a5aa800, R9:  0x0000000000000000, R10: 0x8000000000100000, R11: 0xffffff80002dad00\n" "R12: 0x00000000000008f8, R13: 0xffffff800a473240, R14: 0xffffff800a5aa800, R15: 0x0000000000000007\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f817a7c7f, CS:  0x0000000000000008, SS:  0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:2 78
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8078cfbec0 : 0xffffff8000220792
    0xffffff8078cfbf40 : 0xffffff80002c4dd5
    0xffffff8078cfc0a0 : 0xffffff80002daf2f
    0xffffff807f453db0 : 0xffffff7f81795f65
    0xffffff807f453e80 : 0xffffff7f81797a5c
    0xffffff807f453f30 : 0xffffff80002c6422
    0xffffff807f453f50 : 0xffffff800022d375
    0xffffff807f453f90 : 0xffffff800022ccdb
    0xffffff807f453fb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelCPUPowerManagement(195.0)[70D39B65-894A-335D-A051-0C 8B8CAFEA82]@0xffffff7f81794000->0xffffff7f817bcfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 808429227692
    last loaded kext at 58561462091: com.apple.driver.AppleHWSensor     1.9.5d0 (addr 0xffffff7f817be000, size 28672)
    last unloaded kext at 182593034211: com.apple.driver.AppleUSBUHCI     5.1.0 (addr 0xffffff7f80aa1000, size 65536)
    loaded kexts:
    com.rim.driver.BlackBerryUSBDriverInt     0.0.68
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.filesystems.autofs     3.0
    com.apple.driver.AudioAUUC     1.59
    com.apple.driver.AGPM     100.12.75
    com.apple.driver.AppleMikeyHIDDriver     122
    com.apple.driver.AppleUpstreamUserClient     3.5.9
    com.apple.driver.AppleHDA     2.2.5a5
    com.apple.driver.AppleMikeyDriver     2.2.5a5
    com.apple.driver.AppleIntelHD3000Graphics     7.3.2
    com.apple.driver.SMCMotionSensor     3.0.2d6
    com.apple.driver.AppleSMCPDRC     5.0.0d8
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager     4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleSMCLMU     2.0.1d2
    com.apple.driver.AudioIPCDriver     1.2.3
    com.apple.driver.ApplePolicyControl     3.1.33
    com.apple.driver.AppleLPC     1.6.0
    com.apple.driver.ACPI_SMC_PlatformPlugin     5.0.0d8
    com.apple.driver.AppleBacklight     170.2.2
    com.apple.driver.AppleMCCSControl     1.0.33
    com.apple.driver.AppleUSBTCButtons     227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController     4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard     227.6
    com.apple.driver.AppleIRController     312
    com.apple.iokit.SCSITaskUserClient     3.2.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     33
    com.apple.driver.XsanFilter     404
    com.apple.iokit.IOAHCISerialATAPI     2.0.3
    com.apple.iokit.IOAHCIBlockStorage     2.1.0
    com.apple.driver.AppleUSBHub     5.1.0
    com.apple.driver.AirPort.Brcm4331     561.7.22
    com.apple.driver.AppleFWOHCI     4.9.0
    com.apple.driver.AppleSDXC     1.2.2
    com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8
    com.apple.driver.AppleEFINVRAM     1.6.1
    com.apple.driver.AppleSmartBatteryManager     161.0.0
    com.apple.driver.AppleAHCIPort     2.3.1
    com.apple.driver.AppleUSBEHCI     5.1.0
    com.apple.driver.AppleACPIButtons     1.5
    com.apple.driver.AppleRTC     1.5
    com.apple.driver.AppleHPET     1.7
    com.apple.driver.AppleSMBIOS     1.9
    com.apple.driver.AppleACPIEC     1.5
    com.apple.driver.AppleAPIC     1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient     195.0.0
    com.apple.nke.applicationfirewall     3.2.30
    com.apple.security.quarantine     1.4
    com.apple.security.TMSafetyNet     8
    com.apple.driver.AppleIntelCPUPowerManagement     195.0.0
    com.apple.kext.triggers     1.0
    com.apple.driver.DspFuncLib     2.2.5a5
    com.apple.iokit.IOSurface     80.0.2
    com.apple.iokit.IOSerialFamily     10.0.5
    com.apple.iokit.IOFireWireIP     2.2.5
    com.apple.driver.AppleHDAController     2.2.5a5
    com.apple.iokit.IOHDAFamily     2.2.5a5
    com.apple.iokit.IOAudioFamily     1.8.6fc18
    com.apple.kext.OSvKernDSPLib     1.3
    com.apple.driver.AppleGraphicsControl     3.1.33
    com.apple.driver.AppleSMBusPCI     1.0.10d0
    com.apple.driver.AppleSMC     3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy     5.0.0d8
    com.apple.driver.IOPlatformPluginFamily     5.1.1d6
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport     2.3.4
    com.apple.driver.AppleSMBusController     1.0.10d0
    com.apple.driver.AppleIntelSNBGraphicsFB     7.3.2
    com.apple.iokit.IOGraphicsFamily     2.3.4
    com.apple.driver.AppleThunderboltDPInAdapter     1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily     1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.5
    com.apple.driver.AppleUSBBluetoothHCIController     4.0.8f17
    com.apple.iokit.IOBluetoothFamily     4.0.8f17
    com.apple.driver.AppleUSBMultitouch     230.5
    com.apple.iokit.IOUSBHIDDriver     5.0.0
    com.apple.driver.AppleUSBMergeNub     5.1.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.2.1
    com.apple.iokit.IOBDStorageFamily     1.7
    com.apple.iokit.IODVDStorageFamily     1.7.1
    com.apple.iokit.IOCDStorageFamily     1.7.1
    com.apple.driver.AppleThunderboltNHI     1.6.0
    com.apple.iokit.IOThunderboltFamily     2.0.3
    com.apple.iokit.IOUSBUserClient     5.0.0
    com.apple.iokit.IO80211Family     420.3
    com.apple.iokit.IOFireWireFamily     4.4.8
    com.apple.iokit.IOEthernetAVBController     1.0.1b1
    com.apple.iokit.IONetworkingFamily     2.1
    com.apple.iokit.IOAHCIFamily     2.0.8
    com.apple.driver.AppleEFIRuntime     1.6.1
    com.apple.iokit.IOHIDFamily     1.7.1
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.sandbox     177.11
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.driver.DiskImages     331.7
    com.apple.driver.AppleKeyStore     28.18
    com.apple.iokit.IOUSBMassStorageClass     3.0.3
    com.apple.driver.AppleUSBComposite     5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice     3.2.1
    com.apple.iokit.IOStorageFamily     1.7.2
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.1
    com.apple.iokit.IOUSBFamily     5.1.0
    com.apple.driver.AppleACPIPlatform     1.5
    com.apple.iokit.IOPCIFamily     2.7
    com.apple.iokit.IOACPIFamily     1.4
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Network Service: Leapfrog Device (en3), Ethernet, en3
    Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
      USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

    robertofrombc,
    does your wife’s 13-inch Early 2011 MacBook Pro feel warmer than usual, or is its fan running more loudly than usual, when the screen starts displaying its snow?
    If you still have the model-specific grey installation DVDs that originally came with this MacBook Pro, you could run the Apple Hardware Test that is on the one labelled “Applications Install DVD”, to see if its extended hardware test can detect anything amiss with the hardware.

  • The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than the error console filling up faster than a superman, it seems to be working fine.

    The error console, I clear it and 4 minutes later it has 100's of yellow, pink & blue message lines in it, without me making 100's of clicks or commands ?? .... Other than error console filling up faster than a superman, it seems to be working fine. why does it register so many yellow, pink & blue warnings, errors, etc. ???
    This happens no matter where I am browsing, yahoo, google, mail or news. Clearing the console seems to help with the speed of FF after an hour or so of browsing, it slows down terribly and if not cleared and or shut down and relaunching FF, both actually, it is painfully slow, like dial-up.

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • Install Leopard with Firewire on G4 imac

    I bought a 1ghz G4 imac with 768mb memory. I am using firewire to install Leopard on it from a Macbook 2008. I create a new partition, I apply GUID. It installs fine. On the Macbook screen it shows up fine. When I disconnect the firewire, drag the hd image of the G4 to the trash on the Macbook screen and turn on the G4, all I get is the flashing folder/face. I hook it up again with firewire to the Macbook and the install shows up. What step did I miss???

    Are you using a retail copy of Leopard?  If it's the one that came with your MacBook, it's machine specific and won't install on your G4. GUID is an intel partition method, you need Mac OS Extended (journaled).

  • Logs *FILLED* with "too many HTTP redirects".

    as far as i can tell... this isn't causing an actual issue with any pages.
    but my Console log is literally filled with :
    *7/29/08 4:03:59 PM servermgrd[40] servermgr_web: Request for status failed: Error Domain=NSURLErrorDomain Code=-1007 UserInfo=0xae42540 "too many HTTP redirects". Admin Web graphs may be inaccurate.*
    literally non-stop all day long. doesn't seem to be related to server load / traffic at all really. timing works out to roughly every 1 minute (very slight drift)... i get 2 or 3 entries. sometimes with maybe a 10 second gap in the "groups".
    example of the "groups" :
    7/29/08 4:19:49 PM
    7/29/08 4:19:58 PM
    7/29/08 4:19:58 PM
    7/29/08 4:20:49 PM
    7/29/08 4:20:58 PM
    7/29/08 4:20:58 PM
    7/29/08 4:21:49 PM
    7/29/08 4:21:59 PM
    7/29/08 4:21:59 PM
    7/29/08 4:22:49 PM
    7/29/08 4:23:00 PM
    7/29/08 4:23:00 PM
    it is getting very annoying obviously.
    seeing the word "redirect" i did the obvious thing and disabled every single redirect i had on the entire site... including all subdomains. no change.
    checked the master httpd.conf and the "sites" .conf files as well for anything else odd or redirect-ish looking. nothing.
    since the timing is so regular... i can't really think what it might be.
    one symptom i DO KNOW OF... is that the Server Admin app will not display the logs while the server is actively running. turn the server OFF ... shows the logs in the Log tab... turn server ON... that tab goes empty.
    most likely related.
    the logs are being written though. since i tail them just fine and see real-time activity.
    i turned OFF all logging... error still shows up.
    so as far as i can tell... not related to actual "Redirects"... not related to my disappearing log tab symptom...
    any ideas?
    IIRC this did NOT happen until migrating to Apache 2.
    thanks.
    zeb./

    cat /etc/resolv.conf
    {quote}
    nameserver 209.165.164.3{quote}
    sudo changeip -checkhostname
    {quote}
    Primary address = 209.165.164.4
    Current HostName = www.arcus.org
    The DNS hostname is not available, please repair DNS and re-run this tool.
    {quote}
    and i get...
    {quote}
    host www.arcus.org
    www.arcus.org has address 209.165.164.4
    {quote}
    and subdomains show up right as well...
    {quote}
    host nps.arcus.org
    nps.arcus.org is an alias for www.arcus.org.
    www.arcus.org has address 209.165.164.4
    {quote}
    i guess i do get make double PTR records back from Network Utility... have www.arcus.org as an A and arcus.org as an A. should the latter maybe be a CNAME like the other (sub-)domains?
    {quote}
    4.164.165.209.in-addr.arpa. 86400 IN PTR www.arcus.org.
    4.164.165.209.in-addr.arpa. 86400 IN PTR arcus.org.
    164.165.209.in-addr.arpa. 86400 IN NS ns1.arcus.org.
    ns1.arcus.org. 7200 IN A 209.165.164.3
    {quote}
    could that be the problem?
    another server is set-up pretty much identical to this one (other than the content and it has a CMS) with the same DNS set-up more or less. (no subdomains. but the double A like this one) and it doesn't have the same error. at all.
    though... it also has functioning web graphs and logs in it's Server Admin.
    thanks.

  • Upload Cell Filled With Color In Excel

    Hi All ABAP GURUS,
    I have got the requirement to upload the excel file in sap.
    The excel file contains 2 columns-
        Color_Code            Color
            R1                     (Here excel cell will be filled with Red Color)
            G1                     (Here excel cell will be filled with Light Green Color)
            G2                     (Here excel cell will be filled with Dark Green Color) and so on....
    How to save the Color_Code And Color in ZTable. I have the clear idea about BDC that can upload excel file containing data but no idea hoe to upload the Excel file containing Fill Color.
    Kindly guide me in this matter.
    Thanks & Regards,
    Bharti Jain

    Hi.,
    If you are talking abt coouring the column in Report then go here
    http://www.sap-basis-abap.com/abap/color-a-column-value-in-alv-report.htm
    Regards
    GK.

  • Display Field Filled With 'New Item' when Blank

    Hi all,
    I am facing a Strange Problem.
    When i try to create a Record Via DM, When a DF is Blank and once the record is saved it is being filled with a text called 'New Item'..This is Occuering siometimes when i create and sometimes not.
    There is a validation which will not allow to leave it blank, but the validation is not executing properly as the Field is filled with text 'New Item' Some times (Which inturn says it is not NULL)
    How to get rid of this issue.
    I need this Feild to be DF Because i need to include this field in Email notification.
    In production the records will be created via Portal.
    I am worried if this will be replicated via Portal!!
    Can anyone suggest me..
    KR
    John

    Hi John,
    Yes you are correct. When your field is a  display field & if you dont enter data in it while creating record, MDM will add default value "New Item" in it. (even if you create record from Portal same thing will happen)
    If you want to write Not Null validation on this field below is the work around:
    Enable the Required property for your field in console.
    But Required property in console works only when u write validation in Data manager.
    The default REQUIRED_FIELDS validation does not work if your required field is also a Display field
    You need to write addition condition along with REQUIRED_FIELDS.
    When you try to create record without entering data in display field, MDM will add default value "New Item" if field lengh is equal to or more than 8 ( or "New It" if legth is 6 for example)
    So copy the value which you will get in ur display field and use it as shown below:-
    REQUIRED_FIELDS AND Name < >"New Item" (Here Name is considered as display field) (REQUIRED_FIELDS you need to type in expression window)
    Or if you dont want to enable required property Then just add Name <> "New Item" validation in your existing expression (Here Name is considered as display field)
    Thanks,
    Mahi

  • Trash fills with plist files?

    Upgraded from 10.6.8 to Mavericks. Now the trash consistently gets filled with plist files. Any idea why?

    Hardware Information:
              iMac (20-inch, Early 2009)
              iMac - model: iMac9,1
              1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce 9400 - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              Digidesign Mbox 2 - Path: /Library/StartupItems/Digidesign Mbox 2
              DigidesignLoader - Path: /Library/StartupItems/DigidesignLoader
              M-Audio Firmware Loader - Path: /Library/StartupItems/M-Audio Firmware Loader
              PACESupport - Path: /Library/StartupItems/PACESupport
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 23:39:47
    Disk Information:
              WDC WD3200AAJS-40H3A0 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 319.21 GB (138.99 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GA11N 
    USB Information:
              Apple Inc. Built-in iSight
              Digidesign Mbox 2 
              Generic Mass Storage Device
              M-Audio USB Axiom 25
              iLok iLok
              EPSON EPSON Scanner
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Apple Computer, Inc. IR Receiver
              Novation ZeRO MkII
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
              DMI WD1600BB-00RDA0 400mbit - 400mbit max
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Stuff (disk1s2) /Volumes/Stuff: 159.7 GB (70.04 GB free)
              OWC Mercury Elite-AL Pro unknown_device 400mbit - 400mbit max
                        EFI (disk2s1) <not mounted>: 209.7 MB
                        Sessions (disk2s2) /Volumes/Sessions: 499.76 GB (453.52 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.Cycling74.driver.Soundflower          (1.5.1)
              net.telestream.driver.TelestreamAudio          (1.0.5)
              com.paceap.kext.pacesupport.snowleopard          (5.7.2)
              com.intego.kext.VirusBarrierKPI          (10.6.18)
              com.intego.kext.VirusBarrier.AppBarrierKPI          (10.6.18)
              com.intego.iokit.BehavioralKext          (1)
              com.intego.iokit.VBX6NKE          (1)
              com.intego.iokit.VirusBarrierX6Service          (10.6.18)
              com.digidesign.mbox2.driver          (9.0f4)
    Problem System Launch Daemons:
              [failed] com.apple.wdhelper.plist
    Problem System Launch Agents:
    Launch Daemons:
              [failed] com.adobe.fpsaud.plist
              [loaded] com.barebones.textwrangler.plist
              [loaded] com.bjango.istatmenusdaemon.plist
              [loaded] com.bombich.ccc.plist
              [loaded] com.bombich.ccc.scheduledtask.92969846-1A53-4DF9-AE0E-B7ED61AD1F4E.plist
              [loaded] com.bombich.ccc.scheduledtask.EDD66539-9F21-4C63-B839-6B09D0B4167F.plist
              [loaded] com.ciscosystems.ciscoconnect.daemon.plist
              [loaded] com.ciscosystems.ciscoconnectupgrade.daemon.plist
              [loaded] com.digidesign.fwfamily.helper.plist
              [loaded] com.intego.commonservices.daemon.plist
              [loaded] com.intego.commonservices.icalserver.plist
              [loaded] com.intego.commonservices.metrics.kschecker.plist
              [loaded] com.intego.netupdate.daemon.plist
              [loaded] com.intego.PersonalBackup.daemon.plist
              [loaded] com.intego.task.manager.daemon.plist
              [loaded] com.intego.VirusBarrierX6.daemon.plist
              [loaded] com.intego.VirusBarrierX6.scanner.daemon.plist
              [loaded] com.line6.l6ksettingmgr.plist
              [loaded] com.micromat.TechToolProDaemon.plist
              [loaded] com.novation.automap.pluginhelper.plist
              [loaded] com.paceap.eden.licensed.plist
              [loaded] com.prosofteng.DriveGenius.locum.plist
              [loaded] PACESupport.plist
    Launch Agents:
              [loaded] com.bjango.istatmenusagent.plist
              [loaded] com.hp.help.tocgenerator.plist
              [loaded] com.intego.commonservices.statusitem.plist
              [loaded] com.intego.netupdate.agent.plist
              [loaded] com.intego.personalbackup.agent.plist
              [loaded] com.intego.task.manager.notifier.plist
              [loaded] com.intego.VirusBarrierX6.alert.plist
              [not loaded] com.intego.VirusBarrierX6.statusitem.plist
              [loaded] com.micromat.TechToolProAgent.plist
              [loaded] com.wacom.wacomtablet.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [loaded] com.bombich.ccc-user-agent.plist
              [loaded] com.prosofteng.DGMonitor.plist
              [failed] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              Caffeine
    3rd Party Preference Panes:
              Citrix Online Plug-in
              DigidesignMbox2
              Digidesign Mbox 2 Pro
              Flash Player
              Line6AudioMIDI
              NetUpdate
              TechTool Protection
              WacomTablet
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              CitrixICAClientPlugIn.plugin
              Default Browser.plugin
              DirectorShockwave.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Google Earth Web Plug-in.plugin
              iLokClientHelper.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              WebEx.plugin
              WebEx64.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: NO
              Time Machine not configured!
    Top Processes by CPU:
                  15%          Finder
                   2%          WindowServer
                   2%          SystemUIServer
                   1%          Folder Actions Dispatcher
                   1%          MidiAutomapClient
                   1%          EtreCheck
                   0%          fontd
                   0%          AutomapServer
                   0%          EPSON Scanner
                   0%          taskgated
    Top Processes by Memory:
              319 MB             com.apple.IconServicesAgent
              197 MB             virusbarriers
              115 MB             Finder
              98 MB              WindowServer
              90 MB              Mail
              74 MB              Dock
              74 MB              SystemUIServer
              57 MB              mds_stores
              57 MB              com.apple.WebKit.WebContent
              49 MB              Safari
    Virtual Memory Statistics:
              4.79 GB            Free RAM
              1.97 GB            Active RAM
              227 MB             Inactive RAM
              778 MB             Wired RAM
              619 MB             Page-ins
              72 KB              Page-outs
    Thanks for helping me with this!!!

  • 10g RAC on SLES 9 with Firewire drive

    Hello,
    Is there documents/guides to setting up 10g RAC with firewire drive on SLES 9. Thank you.

    Mike:
    Yes! I resolved the problem by applying the 9.2.0.3 patch. However, ocfs is not working properly. Sometime I got I/O problem or used one node to create tablespace but the other node can not see it right away. May be is because I use version 1.0 of ocfs.o. I am trying to find newer version of ocfs.o. If you know where to get it please let me know.

  • Private/tmp file filled with random folders

    Several times in the past few months I have had the Private/tmp file filled with random folders taken off of my HD. I can easily find them with Whatsize but they are always in the Private/tmp file. This, of course brings my startup disc up with the usual warning "Startup disc is full.
    I have looked on console and the only thing that looks suspicious is the following entry:
    Sep 22 12:35:34 <user>-imac com.apple.launchd[1] (org.postfix.master[934]): Stray process with PGID equal to this dead job: PID 935 PPID 1 pickup
    This entry occurs continuously throughout the log.
    I use both Super duper and Time Machine to back up my systems HD and my Docs HD.
    Any help on this. I have used Apples since 1982 and this is a first.
    Thanks

    Thanks Red Menace.
    I am aware of the regular tmp files, but what I am talking about is over 500GB of random files from my hard disk put into the private/tmp folder. It is not the normal machine operation.
    Further investigation indicates it might be Super Duper, but I can not find an exact duplicate of my problem

  • Unable to Capture HDTV with Firewire

    I would like to use the Firewire out capability of my LG HDTV and record video into the computer.
    I've connected the G5 and tried using iRecord 0.4 and VirtualDVHS. The TV recognizes the 1394 connection and will often tell me it is transfering data, but no application has received any video. The time counter will increment, but the destination file stays at zero size.
    I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
    I've wondered if buying QuickTime Pro will help, I only hesitate to do this because in the past, as soon as I buy Pro, a new QuickTime comes out and I have to do it agian. I'll buy it if it will help. So, Will it help to have QuickTime Pro?
    I am also looking at some of AVCVideo applications in the SDK and wonder of these might be closer to what I want to work with. So, With Firewire, how specific are devices, i.e. do I want the G5 to look like a DVR or something else?
    Finally, iMovie seems to expect to see a camera and the video from the TV does not seem to look like a camera (iMovie tells me no camera is connected). Is there a plug in or tool to trick iMovie or add capability to it to act as a DVR? I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
    Thanks! This was posted in another forum for a few weeks with no repsonses, this is the last chance.

    Vidi didn't work.
    The TV Firewire and Vidi had no compatible modes.
    I suspect that iRecord and VirtualDVHS offer the same capability. There is some setting on the Firewire stream that is compatible with none of these programs. Still looking for a solution.
    Thanks.

  • Fill with blanks(spaces) a VARCHAR2 type

    Thanks in advance,
    I have a VARCHAR2 type rtesta's var of length x(100 char)
    how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g
    rtesta := ' PC'||fil1||'xxx||fill2....
    where fil1 = say 10 spaces.. fill2 = 63 spaces and so on
    I would like something as
    rtesta := ' PC'|| RPAD(null,10)||'xxx||RPAD(null,63) ...
    but.... Oracle treats an empty string as null. And nulls are always a bit special within Oracle. Particularly, rpad('', n) and lpad('', n) returns null.
    Exists a built in for my problem?
    Thanks

    alter table your_table modify(your_column char(100));
    update your_table set your_column = ' '
      where your_clumn is null;  /* (added) But,this is no good for performance */
    alter table your_table modify(your_column varchar2(100));Exapmples.
    SQL> set null (null)
    SQL> create table test (vc varchar2(100));
    Table created.
    SQL> insert into test values ('');
    1 row created.
    SQL> insert into test values ('a');
    1 row created.
    SQL> insert into test values ('abcde');
    1 row created.
    SQL> select substr(vc,1,10) vc,length(vc) len from test;
    VC                          LEN
    (null)               (null)
    a                             1
    abcde                         5
    SQL> alter table test modify(vc char(100));
    Table altered.
    SQL> update test set vc = ' ' where vc is null;
    1 row updated.
    SQL> alter table test modify(vc varchar2(100));
    Table altered.
    SQL> select substr(vc,1,10) vc,length(vc) len from test;
    VC                          LEN
                                100
    a                           100
    abcde                       100----
    I misread OP's problem, sorry.
    Message was edited by:
    ushitaki

Maybe you are looking for

  • Assign Tasklist in PM Order - Menu option

    Hello , We have a requirement to have inspection after finishing the operations so i have to attach the general tasklist keeping the Quality Information.So that after release i can get a inspection lot in order.Now here when i am trying to attach the

  • SAP roles and BW

    I am new to SAP and BW.  A goal of mine, straight from my GEM form, is to "Increase my knowledge of the security in the SAP application by understanding SAP roles and how they apply to Business Warehousing".  Please point me to websites, books, white

  • MPEG Streamclip - 1440x810 mpeg comes out in 4:3 no matter what

    I'm not too hot on frame sizes and compression rates etc, but i thought i knew enough to get streamclip to convert an mpeg (which "get info" tells me is in 1440x810) to a quicktime file without any other further intervention. but it's coming out in 4

  • Where are GIDs in OSX 10.6.8 kept ?

    How do i edit the GID in OSX 10.6.8. I need to make my accounts on my iMac work with a NFS and need to ensure UID and GIDs are synchd to those on the NFS device.

  • How to change password iPhoto

    I am new to Mac Book Pro so if you know the answer please remember K.I.S.S. as I don't know where to find all the drop down menus stuff like I did with Windows. Here is my problem: I have my password for this site and iCloud but I beieve I messed up