Console in WinXP don't work

Hi folks,
I updated my OS to XP, my weblogic console does't work now. In the left
side of the console there should be a tree like control, but now nothing but
a "x" on the left side. Can somebody please tell me how to solve this
promblem? I did download and install the jdk1.3.1 virtual machine.

My console works now. I install the JDK1.3.1, it contains the JRE, now it
works. Because My system have jb6, weblogic6 installed, I seldom install a
JDK. But I still don't know why the JVM from sun(which is installed
automatically) doesn't work, while the JRE in the JDK1.3.1 works.
Thanks a lot to Cameron Purdy and Dimitri Rakitine.
"Dimitri Rakitine" <[email protected]> wrote in message
news:[email protected]...
I think that when IE encounters page which has an applet it promts user
to download MS JVM. Also check IE security settings.
Or download and use Netscape instead ;-)
LostParadise <[email protected]> wrote:
Yes, I know XP installations do not have Microsoft VM installed, so I
downloaded one from sun and installed it, but the vm seems not working,
I
noticed when I visit java.sun.com, there is also a "X" in the page, Ithink
that is an applet. But I don't know how to make the vm work. (I let the
program from sun download the vm and install on my xp, the operation is
succeful, and nothing else had I done to it's configurations.)
"Dimitri Rakitine" <[email protected]> wrote in message
news:[email protected]...
Can it be because tree-control is an applet and (some?) XP
installations
do not have Microsoft VM installed.
Cameron Purdy <[email protected]> wrote:
What version of WL? I assume 6.1 but the 5.x and prev consoles were
Swing
while 6.x are browser based.
Are you running the server and console on one machine or separate?
Try
to
access from a different machine or browser from a different vendor.
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"LostParadise" <[email protected]> wrote in message
news:[email protected]...
Hi folks,
I updated my OS to XP, my weblogic console does't work now. In
the
left
side of the console there should be a tree like control, but now
nothing
but
a "x" on the left side. Can somebody please tell me how to solve
this
promblem? I did download and install the jdk1.3.1 virtual machine.
Dimitri--
Dimitri

Similar Messages

  • Creative EAX Console audio effects don't work like before

    My audio effects on my eax console used to make a bigger difference. ?I used to use Concert Hall and the reverb effect was much greater just until recently when I downloaded some upgrades creative said i needed. ?I have tried to edit the audio effect individually except there is no edit button like the "help" menus suggests me to use. ?wtf
    ?HELP!?

    Hmmm. You seem to have tried, without success, most if not all of the methods of resolving a Ken Burns black screen issue.
    Some thoughts that have occurred to me:
    1. Perhaps your G4 500mhz Mac is not fast enough. I think that the minimum spec for iLife '06 is 733mhz. Might have nothing to do with this problem, but I just mention it.
    2. Are the sizes of your images too large, as can happen with some of these new high def cameras? iMovie has trouble working with very large images.
    3. Do you have any 3rd pary plug-ins, particularly in Quick Time, that could be causing a conflict?
    4. Do you have enough disk space for the project to operate?
    5. Have you done a recent Quick Time update? Some users have reported a problem with that.
    6. From your post, it appears that you have continuously worked within the same iMovie file that exhibits the Ken Burns problem. If this is true, try creating a new iMovie project and experimenting with a few clips to see if the problem persists in the new project.
    Ken Burns issues can be very frustrating. I think that you will need to keep trying things until something works. Wish I could be more help, but perhaps some of the tech experts on this forum will have some workable suggestions.
    There is an application called Photo to Movie that reputedly has a far better Ken Burns type of effect. If you can't resolve your problem, you might try downloading that app. I believe that it offers a demo download.
    Good luck.

  • Created Menu in JS in Acobat 7.0 that works and Don't work in 9.2

    I created a menu that does a "Save As" which converts pdf to jpeg in Acorbat 7.0 on XP Pro OS.  In MS VBA code, I do the following VBA Code that execute the menu in Acrobat using "MenuItemExecute".
                Set gApp = CreateObject("AcroExch.App")
                Set AVDoc = CreateObject("AcroExch.AVDOC")
                If (AVDoc.Open(Path, Path)) Then
                    Set AVPageView = AVDoc.GetAVPageView
                    Set pdDoc = AVDoc.GetPDDoc()
                    Set jso = pdDoc.GetJSObject
                    'gApp.Show
                    gApp.MenuItemExecute "SaveToJPEG"
                    Set jso = Nothing
                    pdDoc.Close
                    Set pdDoc = Nothing
                    AVDoc.Close (NoSave)
                    Set AVDoc = Nothing
                End If
    In order to run my custom Menu "SaveToJPEG" which is really a "Save As" to jpeg, I had to set the Edit>Preferences>JavaScript to "Enabled menu items JavaScripts execution privileges" and "Enable Acrobat JavaScript".    The above code works in my MS Access VBA program in Acrobat 7.0 running in XP Pro OS.
    I am having problems running Acrobat 9.2 on Win 7 Pro, and I get the following error "An Internal Error Occurred" when it execute the code line gApp.MenuItemExecute "SaveToJPEG"
    I made the changes to Edit>Preferences>JavaScript to "Enabled menu items JavaScripts execution privileges" and "Enable Acrobat JavaScript" too.
    I am able to select "SaveToJPEG" from the menu bar only when I have a pdf file open, and it does make a jpeg !   This means my JavaScript of my menu works in Acrobat 9.2.
    I also checked the registry HEY_KEY_Computer_User\software\adobe\adobe acrobat\9.0\JSPrefs\bEnableJS   ,   bEnableMenuItems,  bEnableGlobalSecurity
    The bEnableJS is Hex 1, and the bEnableMenuItems is Hex 1, and the bEnableGlobalSecurity is Hex 1
    I do know that acrobat 9.0+ does have the ability in the menu to do the same thing, but I want to keep my code compatible with acrobat 7.0
    Then the MenuItemExecute will not work in multiple menu flow down like Export>Image>Jpeg.   I would also appreciate how to reference this menu too !
    Can someone please help me !!
    ThankYou,

    I got the app.listMenuItems() to work.   I have to use the lower right side Enter key.  It appears that the two Enter keys don't work the same here.
    I used the following script to list the menu items:
         var menuItems = app.listMenuItems()
         for( var i in menuItems)
         console.println(menuItems+ + "\n")
    I got the following:   It was very long, but I will just print a few of them.   How do I spot the formal name for my "SaveToJPEG" menu item???  It is the second one.
    This is what I see from app.listMenuItems() :
    [cName:File, oChildren:[[cName:Open],[cName:SaveToJPEG],[cName:Organizer, oChildren:[[cName:OpenOrganizer],[cName:AddToOrganizer],[cName:OrganizerNewCollection]]], [cName:endOpenGroup],[cName:NewCollection],[cName:Collection, oChildren:[[cName:CollectionEditInAcrobat],[cName:],[cName:AddFilesToCollection],[cName:A ddFolderToCollection],[cName:CreateFolderInCollection],[cName:],[cName:SecureCollection]]] ,[cName:],[cName:NewDocument, oChildren:[[cName:NewDocFromFile],[cName:ScanMenu, oChildren:[[cName:ScanPreset1],[cName:ScanPreset2],[cName:ScanPreset3],[cName:ScanPreset4 ],[cName:Scan],[cName:],[cName:ScanConfigurePreset]]],[cName:Web2PDF:OpnURL],
    It give me a message at the bottom that it "cannot continue printing to the console"
    Can I send this to a file or some where else where I can see everything??   Maybe the formal names are toward the end ???   I don't see the formal name here????
    Please Help ! !
    Thank You,
    Gary

  • Signed applet don't work on XP

    Hi,
    I'am currently working on a point-of-sale (POS) using windows XP/Firefox and a linux apache/jboss server.
    I have developed a dynamic windows library in order to use an industrial printer connected to the POS to perform some printing without confirmation of the customer.
    The POS is under Windows XP SP2 and use Firefox 2.0.0.11/JRE 1.5.0.14.
    This dll is used by a signed applet located on the apache/jboss server.
    The applet is correctly downloaded by the client, but normally i have to wait for the certicat authentification windows appearing and for confirming that i want execute the applet. And instead i have a java exception :
    security: La v�rification du certificat � l'aide des certificats AC racine a �chou�
    security: Aucune information d'horodatage disponible
    java.lang.NullPointerException
         at com.sun.deploy.ui.UIFactory.showSecurityDialog(Unknown Source)
         at com.sun.deploy.security.TrustDeciderDialog.showDialog(Unknown Source)
         at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
         at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
         at sun.plugin.security.PluginClassLoader.getPermissions(Unknown Source)
         at java.security.SecureClassLoader.getProtectionDomain(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    security: L'utilisateur a refus� les droits d'acc�s au code
    basic: Taille de cache du chargeur de classes courant : 1
    basic: Termin�...
    basic: Jonction du thread d'applet...
    basic: Destruction de l'applet...
    basic: Elimination de l'applet...
    basic: Sortie de l'applet...
    java.lang.ExceptionInInitializerError
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.C:\Program Files\BICImpression\impression_api.dll)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkLink(Unknown Source)
         at java.lang.Runtime.load0(Unknown Source)
         at java.lang.System.load(Unknown Source)
         at applets.impression.Impression.<clinit>(Impression.java:38)
         ... 11 moreand then the certicat authentification windows appears but it's too late, the applet won't never execute ...
    the apache/jboss server is accessed via some gateway, firewal, ... tha t i can't control
    the apache jboss/server on my own PC is accessed directly :
    What is amazing, is that work fine with my own professionnal PC on W2000 SP4, with JRE1.5.0.14 and Firefox 2.0.0.11 :
    when I look in the java console, the java freeze until i have answered this java security window (certicat authentification windows). And when i answered "run" no problem the applet makes her own job.
    here is the code when it works :
    security: La v�rification du certificat � l'aide des certificats AC racine a �chou�
    security: Aucune information d'horodatage disponible
    basic: Plugin modality.pushed
    basic: Modalit� empil�e
    basic: push javax.swing.JDialog[dialog0,379,296,519x323,layout=java.awt.BorderLayout,modal,title=Avertissement - S�curit�,defaultCloseOperation=HIDE_ON_CLOSE,rootPane=javax.swing.JRootPane[,3,22,513x298,layout=javax.swing.JRootPane$RootLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=16777673,maximumSize=,minimumSize=,preferredSize=],rootPaneCheckingEnabled=true]
    basic: Chargement arr�t�...
    basic: Arr�t de l'applet...Conclusion
    POS : Win XP SP2, JRE1.5.0.14 (i tried 1.5.0.6 and 1.6.3 the latest), Firefox 2.0.0.11 (I tried 2.0.0.0 and 3 beta2 don't work anyway)
    my own server/client : W2000 SP4, JRE1.5.0.14, Firefox 2.0.0.11
    Linux server : RHEL4
    It works with IE on the POS with the linux sever but it's not the selected browser.
    It works with IE on the POS with my own server.
    It works with Firefox on the POS with my own server.
    It works with IE on my own server with the linux sever but it's not the selected browser.
    It works with IE on my own server with my own server.
    It works with Firefox on my own server with the linux sever.
    It works with Firefox on my own server with my own server.
    If you have some idea to make it work i'm you're buyer !!
    Thank a lot for reading this, and i apologize for my poor english ...
    greetings,
    Benoit
    Edited by: bendur on Feb 29, 2008 3:49 AM

    Ok I have found my problem :
    On every web pages, we have defined some inactivity timeouts.
    On my own server I have disabled these timeouts but not on the distant timeout.
    And it seems that the timeout (defined in javascript ont he web pages : 3s) has a very bad influence on the launching of my applet ... only with firefox (with IE and Opera no problem)
    My problem is anwsered but the problem keep alive for firefox ...

  • Yosemite (10.10.3). Any browser don´t work with by wifi

    Hi
    I think i have the same problem that most the Mac users have had after upgrade from Mavericks to Yosemite (10.10.3) and are connected to internet by wifi.
    This new version don´t work fine, or in any way, with any internet browser (Safari, Mozilla, Crome...) when the connection it´s by WiFi. In fact i´m writing this with a ethernet cat 5e connection.
    I read in other thread that version 10.10.3 solved this problem but at least in my case it's not true.
    And like other users as i read, in some normal actions, like open "System Preferences", appears the wheel round and round during two o three seconds, when with Maverick don´t happens. Probably this last problem it´s a question of RAM memory, but nothing in the upgrade said that you need more that 8 GB to work with normality like before.
    Below this you have the Etrecheck report.
    Thanks in advance and greetings from Madrid
    Problem description:
    Yosemite (10.10.3). Wifi don´t work with any browser
    EtreCheck version: 2.1.8 (121)
    Report generated 12 de abril de 2015, 20:44:10 CEST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.7 GHz Intel Core i7 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 29
    Video Information: ℹ️
        Intel HD Graphics 3000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.3 (14D131) - Time since boot: 0:42:4
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (275.44 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 30
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/VMware Fusion.app
        [not loaded]    com.vmware.kext.vmci (90.6.3) [Click for support]
        [not loaded]    com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
        [not loaded]    com.vmware.kext.vmnet (0249.89.30) [Click for support]
        [not loaded]    com.vmware.kext.vmx86 (0249.89.30) [Click for support]
        [not loaded]    com.vmware.kext.vsockets (90.6.0) [Click for support]
            /Library/Application Support/MacKeeper/AntiVirus.app
        [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
        [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
        [not loaded]    com.emu.driver.EMUUSBAudio (1.4.0 - SDK 10.6) [Click for support]
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.macvide.driver.MacVideAudioConnectorDriver (1.0.0) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        MySQLCOM: Path: /Library/StartupItems/MySQLCOM
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.divx.dms.agent.plist [Click for support]
        [loaded]    com.divx.update.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.apple.spirecorder.plist
        [loaded]    com.bombich.ccc.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [running]    com.zeobit.MacKeeper.Helper.plist [Click for support]
    User Login Items: ℹ️
        Mail    Aplicación Hidden (/Applications/Mail.app)
        Dropbox    Aplicación  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        iMedia Converter Deluxe
        iTube Studio
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MySQL  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
        Destinations:
            Time Machine [Local]
            Total size: 499.76 GB
            Total number of backups: 2
            Oldest backup: 2012-11-25 14:45:01 +0000
            Last backup: 2012-11-26 22:08:06 +0000
            Size of backup disk: Excellent
                Backup size 499.76 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
            18%    WindowServer
             0%    fontd
             0%    AppleSpell
             0%    taskgated
             0%    SystemUIServer
    Top Processes by Memory: ℹ️
        481 MB    MacKeeper Helper
        275 MB    AntiVirus
        215 MB    firefox
        172 MB    softwareupdated
        129 MB    mds_stores
    Virtual Memory Information: ℹ️
        3.04 GB    Free RAM
        3.49 GB    Active RAM
        668 MB    Inactive RAM
        1.39 GB    Wired RAM
        1.66 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Apr 12, 2015, 08:00:37 PM    Self test - passed
        Apr 12, 2015, 07:58:07 PM    /Library/Logs/DiagnosticReports/System Preferences_2015-04-12-195807_[redacted].hang

    Hi again Linc
    Sorry for de delay but i have receive the famous e-mail:
    "Hello!
    My name is Josephine Bergson representing the advertising department of the LLI Consulting company..." thats offers 950$ for put a banner in your web site!!. For that it´s necessary to run one supposed applet of Java, and after do that i have been checking, and apparently does nothing.
    Well. I have done old you tell me in your response and here you have the result of your "Diagnostic Test". Only one thing for you information: the wifi connection have works fine during two hours but fails run the  "Diagnostic Test". I want explain that the failures of wifi connection are intermittent.
    Thanks again. Wait for your answer
    Greetings
    Jesus
    Start time: 01:55:22 04/13/15
    Revision: 1311
    Model Identifier: MacBookPro8,1
    System Version: OS X 10.10.3 (14D131)
    Kernel Version: Darwin 14.3.0
    Time since boot: 3:28
    UID: 501
    SerialATA
        TOSHIBA MK5065GSXF                     
    FireWire
        eGo Rugged FW USB2 (iomega)
    USB
        Compact Optical Mouse 500 (Microsoft Corporation)
        Intuos5 touch S (WACOM Co., Ltd.)
        USB SMART CARD READER (C3PO)
        Storage (Iomega Corporation)
        Storage (Iomega Corporation)
        Deskjet F4100 series (Hewlett Packard)
    Bluetooth
        Apple Magic Mouse
        Apple Wireless Keyboard
    Activity
        CPU: user 10%, system 7%
        en1: in 636, out 19 (KiB/s)
    CPU usage (%)
        WindowServer (UID 0): 25,8
    Energy (lifetime)
        kernel_task (UID 0): 9.88
        WindowServer (UID 88): 6.97
    Energy (sampled)
        Safari (UID 501): 8.70
        storedownloadd (UID 501): 6.39
    DNS: 80.58.61.250 (static)
    Listeners
        kdc: kerberos
        launchd: afpovertcp
    Wi-Fi
        Security: WPA Personal
    Diagnostic reports
        2015-04-12 System Preferences hang
        2015-04-13 WacomTabletDriver crash
    HID errors: 11
    Kernel log
        Apr 11 16:13:39 vmnet: netif-vmnet8: SIOCPROTODETACH failed: 16.
        Apr 11 19:39:08 MacAuthEvent en1   Auth result for: 00:19:15:d0:8a:84 Auth request tx failed
        Apr 11 19:51:05 firefox (map: 0xffffff801d7fb0f0) triggered DYLD shared region unnest for map: 0xffffff801d7fb0f0, region 0x7fff8ec00000->0x7fff8ee00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 19:55:00 firefox (map: 0xffffff8040abe960) triggered DYLD shared region unnest for map: 0xffffff8040abe960, region 0x7fff90e00000->0x7fff91000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 20:01:34 [BNBMouseDevice][waitForHandshake][58-1f-aa-fc-6b-e9] Timeout waiting for handshake
        Apr 12 20:01:34 [BNBMouseDevice::_simpleSetReport][85.3] ERROR: setReport returned error 0xe00002d6 for reportID 0xD7
        Apr 12 20:01:34 [BNBMouseDevice::_enableMultitouchEvents][85.3] ERROR: _simpleSetReport returned error 0xe00002d6
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
        Apr 12 20:01:35 [AppleBluetoothHIDKeyboard][sendData][40-30-04-07-71-f9] commandSleep in sendData returned an error
        Apr 12 20:01:37 [BNBMouseDevice][waitForHandshake][58-1f-aa-fc-6b-e9] Timeout waiting for handshake
        Apr 12 20:01:37 [BNBMouseDevice::_simpleSetReport][85.3] ERROR: setReport returned error 0xe00002d6 for reportID 0xD7
        Apr 12 20:01:37 [BNBMouseDevice::_enableMultitouchEvents][85.3] ERROR: _simpleSetReport returned error 0xe00002d6
        Apr 12 20:01:47 ### ERROR: Exit sniff failed (probably already unsniffed) (err=10)
        Apr 12 20:01:48 ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0010 (kBluetoothHCIErrorHostTimeout))
        Apr 12 20:30:50 firefox (map: 0xffffff8016b324b0) triggered DYLD shared region unnest for map: 0xffffff8016b324b0, region 0x7fff89400000->0x7fff89600000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
        Apr 12 22:19:55 Kext com.apple.driver.AppleIntelSlowAdaptiveClocking failed to loadCouldn't alloc class "AppleThunderboltEDMSink"
        Apr 12 22:19:55 Failed to load kext com.apple.driver.AppleIntelSlowAdaptiveClocking Couldn't alloc class "AppleThunderboltIPService"
        Apr 12 22:21:10 [AppleBluetoothHIDKeyboard][sendData][40-30-04-07-71-f9] commandSleep in sendData returned an error
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
        Apr 12 22:21:13 [AppleBluetoothHIDKeyboard][waitForHandshake][40-30-04-07-71-f9] Timeout waiting for handshake
        Apr 12 22:21:15 [AppleBluetoothHIDKeyboard][getExtendedReport] getReport returned error e00002d8
        Apr 12 22:21:21 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0xb
        Apr 12 22:31:47 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
    System log
        Apr 13 00:47:36 WindowServer: window 130 is already attached to window 12b
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:47:43 WindowServer: WSGetSurfaceInWindow : Invalid surface 1086438165 for window 298
        Apr 13 00:53:05 fseventsd: Logging disabled completely for device:1: /Volumes/Antivirus for Mac
        Apr 13 00:53:46 BDCoreIssues: VerifyLo_(com.bitdefender.coreissues.issues.plist): 22
        Apr 13 00:53:46 BDCoreIssues: VerifyLo_(state.txt): 22
        Apr 13 00:55:39 WindowServer: WSGetSurfaceInWindow : Invalid surface 1061774428 for window 343
        Apr 13 00:58:59 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
        Apr 13 00:59:39 spindump: Error loading dyld shared cache uuid UUID: 0x8
        Apr 13 01:00:41 BDUpdDaemon: [com.bitdefender.upddaemon] reload('/var/tmp/Bitdefender/AvDaemon', 584): 60
        Apr 13 01:09:02 com.apple.kextd: Kext id com.apple.kernel.iokit not found; removing personalities from kernel.
        Apr 13 01:09:02 com.apple.kextd: String/URL conversion failure.
        Apr 13 01:09:08 fseventsd: event logs in /Volumes/Copia de Seguridad/.fseventsd out of sync with volume.  destroying old logs. (528 1 19163)
        Apr 13 01:09:09 fseventsd: log dir: /Volumes/Copia de Seguridad/.fseventsd getting new uuid: UUID
        Apr 13 01:09:09 fseventsd: event logs in /Volumes/JVT/.fseventsd out of sync with volume.  destroying old logs. (528 1 19164)
        Apr 13 01:09:10 fseventsd: log dir: /Volumes/JVT/.fseventsd getting new uuid: UUID
        Apr 13 01:09:27 WindowServer: MPServiceForDisplayDevice: Invalid device alias (0)
        Apr 13 01:09:35 WindowServer: MPServiceForDisplayDevice: Invalid device alias (0)
        Apr 13 01:17:20 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: Window not in group
        Apr 13 01:17:40 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: Window not in group
        Apr 13 01:22:21 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "App Store" for over 1.00 seconds. Server has re-enabled them.
        Apr 13 01:23:39 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Apr 13 01:28:20 fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
        Apr 13 01:38:00 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    launchd log
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc/Contents/MacOS/DataDetectorsDynamicData error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc/Contents/MacOS/SandboxedServiceRunner error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCTimeSta mpingService.xpc/Contents/MacOS/XPCTimeStampingService error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/XPCServices/com.apple.DictionaryServiceHelper.x pc/Contents/MacOS/com.apple.DictionaryServiceHelper error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCKeychai nSandboxCheck.xpc/Contents/MacOS/XPCKeychainSandboxCheck error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/IOKit.framework/Versions/A/XPCServices/IOServiceAuth orizeAgent.xpc/Contents/MacOS/IOServiceAuthorizeAgent error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc/Contents/MacOS/com.apple.S peechRecognitionCore.brokerd error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCTimeSta mpingService.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/XPCServices/com.apple.DictionaryServiceHelper.x pc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/IOKit.framework/Versions/A/XPCServices/IOServiceAuth orizeAgent.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Failed to bootstrap path: path = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/XPCKeychai nSandboxCheck.xpc, error = 1: Operation not permitted
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/Frameworks/AppKit.framework/Versions/C/XPCServices/SandboxedSer viceRunner.xpc/Contents/MacOS/SandboxedServiceRunner error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/SpeechRecognitionCore.framework/Versions/A/XP CServices/com.apple.SpeechRecognitionCore.brokerd.xpc/Contents/MacOS/com.apple.S peechRecognitionCore.brokerd error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/XPCSer vices/DataDetectorsDynamicData.xpc/Contents/MacOS/DataDetectorsDynamicData error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:20:06 com.apple.xpc.launchd.domain.pid.SecurityAgent.205: Path not allowed in target domain: type = uid, path = /System/Library/PrivateFrameworks/GeoServices.framework/Versions/A/XPCServices/ com.apple.geod.xpc/Contents/MacOS/com.apple.geod error = 1: Operation not permitted, origin = /System/Library/Frameworks/Security.framework/Versions/A/XPCServices/SecurityAg ent.xpc
        Apr 12 22:28:22 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.214, service = com.apple.photostream-agent, error = 119: Service is disabled
        Apr 13 00:53:38 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Library/LaunchAgents/com.bitdefender.antivirusformac.plist, error = 2: No such file or directory
        Apr 13 00:53:38 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Library/LaunchAgents/com.bitdefender.EndpointSecurityforMac.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.upgrade.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.epag.plist, error = 2: No such file or directory
        Apr 13 00:53:39 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist, error = 2: No such file or directory
        Apr 13 00:53:41 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.bitdefender.epag.plist, error = 2: No such file or directory
    Console log
        Apr 10 22:42:36 fontd: Failed to open read-only database, regenerating DB
        Apr 10 22:44:05 mbloginhelper: Property list invalid for format: 200 (property lists cannot contain NULL)
        Apr 12 22:28:23 fontd: Failed to open read-only database, regenerating DB
    Loaded kernel extensions
        com.Cycling74.driver.Soundflower (1.6.6)
        com.hzsystems.terminus.driver (4)
        net.kromtech.kext.Firewall (2.3.7)
    System services loaded
        com.adobe.fpsaud
        com.apple.Kerberos.kdc
        - status: 1
        com.apple.mtrecorder
        - status: 78
        com.apple.spirecorder
        - status: 78
        com.apple.watchdogd
        com.bitdefender.AuthHelperTool
        com.bitdefender.CoreIssues
        com.bitdefender.Daemon
        com.bitdefender.UpdDaemon
        com.bitdefender.upgrade
        com.bombich.ccc
        com.macpaw.CleanMyMac2.Agent
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.oracle.java.JavaUpdateHelper
        com.zeobit.MacKeeper.AntiVirus
    System services disabled
        com.apple.mtmd
        com.apple.mrt
        com.apple.mtmfs
    Login services loaded
        com.adobe.CS5ServiceManager
        com.apple.mrt.uiagent
        com.bitdefender.antivirusformac
        com.divx.dms.agent
        com.divx.update.agent
        com.google.keystone.user.agent
        com.macpaw.CleanMyMac2Helper.diskSpaceWatcher
        com.macpaw.CleanMyMac2Helper.scheduledScan
        com.macpaw.CleanMyMac2Helper.trashWatcher
        com.oracle.java.Java-Updater
        com.wacom.wacomtablet
        com.zeobit.MacKeeper.Helper
    Login services disabled
        com.macpaw.CleanMyMac.volumeWatcher
        com.macpaw.CleanMyMac.trashSizeWatcher
        com.apple.photostream-agent
        com.macpaw.CleanMyMac.helperTool
        com.adobe.AAM.Scheduler-1.0
        com.spotify.webhelper
    User services disabled
        com.macpaw.CleanMyMac.volumeWatcher
        com.macpaw.CleanMyMac.trashSizeWatcher
        com.apple.photostream-agent
        com.macpaw.CleanMyMac.helperTool
        com.adobe.AAM.Scheduler-1.0
        com.spotify.webhelper
    Startup items
        /Library/StartupItems/MySQLCOM/MySQLCOM
        /Library/StartupItems/MySQLCOM/StartupParameters.plist
    User login items
        Mail
        - /Applications/Mail.app
        Dropbox
        - /Applications/Dropbox.app
    Safari extensions
        iMedia Converter Deluxe 
        - com.wondershare.iskyvc
        iTube Studio
        - com.wondershare.safari.itubestudio
    Firefox extensions
        Clear Console
        QBurst
    iCloud errors
        cloudd 51
        comapple.CloudPhotosConfiguration 27
        cloudphotosd 8
        storedownloadd 2
        accountsd 2
        Finder 2
        Spotlight 1
        Mail 1
        CallHistorySyncHelper 1
    Continuity errors
        sharingd 3
    Restricted files: 1610
    Lockfiles: 178
    High file counts
        Desktop: 61
    Contents of /Library/LaunchAgents/com.bitdefender.antivirusformac.plist
        - mod date: Feb 23 15:39:54 2015
        - size (B): 690
        - checksum: 2783812254
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.antivirusformac</string>
        <key>Nice</key>
        <integer>1</integer>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/private/var/db/.AVXupgRunning</key>
        <false/>
        </dict>
        </dict>
        <key>Program</key>
        <string>/Library/Bitdefender/AVP/AntivirusforMac.app/Contents/MacOS/Antivirusfo rMac</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/AntivirusforMac.app/Contents/MacOS/Antivirusfo rMac</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
        - mod date: Nov 17 09:11:48 2014
        - size (B): 426
        - checksum: 637650676
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.divx.dms.agent</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.divx.update.agent.plist
        - mod date: May 19 23:24:29 2014
        - size (B): 498
        - checksum: 3867571547
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.divx.update.agent</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
        <string>/silent</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>10800</integer>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Jan 15 14:05:43 2014
        - size (B): 104
        - checksum: 1039097793
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>50</integer>
        <key>Minute</key>
        <integer>52</integer>
        <key>Weekday</key>
        <integer>2</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
        - mod date: Oct 12 00:37:46 2013
        - size (B): 712
        - checksum: 2972905917
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>EnvironmentVariables</key>
        <dict>
        <key>RUN_WITH_LAUNCHD</key>
        <string>1</string>
        </dict>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.wacom.wacomtablet</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>Aqua</string>
        <string>LoginWindow</string>
        </array>
        <key>Program</key>
        <string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
        <key>RunAtLoad</key>
        <true/>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.bitdefender.AuthHelperTool.plist
        - mod date: Feb 23 15:39:55 2015
        - size (B): 801
        - checksum: 329828832
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.AuthHelperTool</string>
        <key>KeepAlive</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/common.bundle/AuthHelperTool</string>
        <string>/Library/Bitdefender/AVP/common.bundle/Common.plist</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/com.bitdefender.AuthHelperTool</string>
        <key>SockType</key>
        <string>Stream</string>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/com.bitdefender.upgrade.plist
        - mod date: Feb 23 15:39:55 2015
        - size (B): 609
        - checksum: 972189573
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.bitdefender.upgrade</string>
        <key>Nice</key>
        <integer>1</integer>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>Program</key>
        <string>/Library/Bitdefender/AVP/antivirus.bundle/BDUpgDaemon</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Bitdefender/AVP/antivirus.bundle/BDUpgDaemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.bombich.ccc.plist
        - mod date: Nov 25 14:27:44 2012
        - size (B): 770
        - checksum: 3730953884
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.bombich.ccc</string>
        <key>OnDemand</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
        </array>
        <key>ServiceIPC</key>
        <true/>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        ...and 7 more line(s)
    Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
        - mod date: Nov 13 14:21:09 2014
        - size (B): 801
        - checksum: 3775555851
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2.Agent</string>
        <key>MachServices</key>
        <dict>
        <key>com.macpaw.CleanMyMac2.Agent</key>
        <true/>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
        </array>
        <key>Sockets</key>
        <dict>
        <key>MasterSocket</key>
        <dict>
        <key>SockFamily</key>
        <string>Unix</string>
        <key>SockPathMode</key>
        <integer>438</integer>
        <key>SockPathName</key>
        <string>/var/run/com.macpaw.CleanMyMac2.Agent.socket</string>
        ...and 6 more line(s)
    Contents of /Library/LaunchDaemons/com.zeobit.MacKeeper.AntiVirus.plist
        - mod date: Nov 26 20:34:16 2012
        - size (B): 455
        - checksum: 4244331265
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
            <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.zeobit.MacKeeper.AntiVirus</string>
        <key>Program</key>
        <string>/Library/Application Support/MacKeeper/AntiVirus.app/Contents/MacOS/AntiVirus</string>
        <key>OnDemand</key>
        <false/>
        </dict>
        </plist>
    Contents of /private/etc/hosts
        - mod date: Nov 29 21:28:38 2012
        - size (B): 1194
        - checksum: 1440585190
        127.0.0.1 localhost
        255.255.255.255 broadcasthost
        ::1             localhost
        fe80::1%lo0 localhost
        127.0.0.1 activate.adobe.com
        127.0.0.1 practivate.adobe.com
        127.0.0.1 ereg.adobe.com
        127.0.0.1 activate.wip3.adobe.com
        127.0.0.1 wip3.adobe.com
        127.0.0.1 3dns-3.adobe.com
        127.0.0.1 3dns-2.adobe.com
        127.0.0.1 adobe-dns.adobe.com
        127.0.0.1 adobe-dns-2.adobe.com
        127.0.0.1 adobe-dns-3.adobe.com
        127.0.0.1 ereg.wip3.adobe.com
        127.0.0.1 activate-sea.adobe.com
        127.0.0.1 wwis-dubc1-vip60.adobe.com
        127.0.0.1 activate-sjc0.adobe.com
        127.0.0.1 hl2rcv.adobe.com
        127.0.0.1 activate.adobe.com
        127.0.0.1 practivate.adobe.com
        127.0.0.1 ereg.adobe.com
        127.0.0.1 activate.wip3.adobe.com
        127.0.0.1 wip3.adobe.com
        127.0.0.1 3dns-3.adobe.com
        ...and 9 more line(s)
    Contents of Library/LaunchAgents/com.google.keystone.agent.plist
        - mod date: Mar 17 00:58:04 2015
        - size (B): 805
        - checksum: 2902800363
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.google.keystone.user.agent</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
         <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
         <string>-runMode</string>
         <string>ifneeded</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>3523</integer>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 639
        - checksum: 2857823656
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.diskSpaceWatcher</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-watchDiskSpace</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>StartInterval</key>
        <integer>3600</integer>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.scheduledScan.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 738
        - checksum: 766325059
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.scheduledScan</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>-n</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-scheduled</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>13</integer>
        <key>Minute</key>
        <integer>25</integer>
        </dict>
        ...and 2 more line(s)
    Contents of Library/LaunchAgents/com.macpaw.CleanMyMac2Helper.trashWatcher.plist
        - mod date: Apr 11 01:00:25 2015
        - size (B): 664
        - checksum: 4001678413
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.macpaw.CleanMyMac2Helper.trashWatcher</string>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/bin/open</string>
        <string>-F</string>
        <string>-g</string>
        <string>/Users/USER/Library/Application Support/CleanMyMac 2/CleanMyMac 2 Helper.app</string>
        <string>--args</string>
        <string>-watchTrash</string>
        </array>
        <key>RunAtLoad</key>
        <false/>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/.Trash</string>
        </array>
        </dict>
        </plist>
    Contents of Library/LaunchAgents/com.zeobit.MacKeeper.Helper.plist
        - mod date: Mar 16 11:47:58 2015
        - size (B): 619
        - checksum: 1794757485
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Disabled</key>
        <false/>
        <key>EnvironmentVariables</key>
        <dict>
        <key>ZBTimeStamp</key>
        <string>20150305190134</string>
        </dict>
        <key>Label</key>
        <string>com.zeobit.MacKeeper.Helper</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>OnDemand</key>
        <false/>
        <key>Program</key>
        <string>/Applications/MacKeeper.app/Contents/Resources/MacKeeper Helper.app/Contents/MacOS/MacKeeper Helper</string>
        </dict>
        </plist>
    Bad plists
        /Library/Preferences/com.epson.Epson Customer Research Participation.UnInstallList.plist
        /Library/Preferences/com.epson.Epson Event Manager.UnInstallList.plist
        /Library/Preferences/com.epson.EPSON Scan.UnInstallList.plist
        /Library/Preferences/com.epson.Epson Scanner ICA Driver.UnInstallList.plist
        /Library/Preferences/com.epson.Inkjet Printer Driver.UnInstallList.plist
    Extensions
        /System/Library/Extensions/EMUUSBAudio.kext
        - com.emu.driver.EMUUSBAudio
        /System/Library/Extensions/JMicronATA.kext
        - com.jmicron.JMicronATA
        /System/Library/Extensions/MacVideAudioConnectorDriver.kext
        - com.macvide.driver.MacVideAudioConnectorDriver
        /System/Library/Extensions/RoxioBluRaySupport.kext
        - com.roxio.BluRaySupport
        /System/Library/Extensions/SiLabsUSBDriver.kext
        - com.silabs.driver.CP210xVCPDriver
        /System/Library/Extensions/SiLabsUSBDriver64.kext
        - com.silabs.driver.CP210xVCPDriver64
        /System/Library/Extensions/Soundflower.kext
        - com.Cycling74.driver.Soundflower
        /System/Library/Extensions/Terminus.kext
        - com.hzsystems.terminus.driver
        /System/Library/Extensions/Wacom Tablet.kext
        - com.wacom.kext.wacomtablet
    Applications
        /Applications/Adobe After Effects CS5/Adobe After Effects CS5.app
        - com.adobe.AfterEffects
        /Applications/Adobe After Effects CS5/Adobe After Effects Render Engine.app
        - N/A
        /Applications/Adobe Fireworks CS5/Configuration/Mac/Shared/AdobeAIR/SDK/runtimes/air/mac/Adobe AIR.framework/Versions/1.0/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/lib/nai/lib/naib.app
        - APP_ID
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Versions/1.0/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Flash CS5/AIK2.0/runtimes/air/mac/Adobe AIR.framework/Versions/Current/Resources/Template.app
        - com.adobe.air.NativeTemplate
        /Applications/Adobe Media Encoder CS5/PCI/AMEPCI/resources/uninstall/Uninstall Product.app
        - com.Adobe.Uninstall Product
        /Applications/Adobe Media Encoder CS5/PCI/Dolby/resources/uninstall/Uninstall Product.app
        - com.Adobe.Uninstall Product
        /Applications/Adobe Media Player.app
        - com.adobe.amp.UUID.1
        /Applications/Adobe/Adobe Help.app
        - chc.UUID.1
        /Applications/Audacity/Audacity.app
        - net.sourceforge.audacity
        /Applications/AudioXplorer.app
        - ch.curvuspro.audioxplorer
        /Applications/BitTorrent.app
        - com.bittorrent.BitTorrent
        /Applications/Creative Professional/E-MU USB Audio/E-MU USB Audio Control Panel.app
        - com.creative-professional.E-MU USB Audio Control Panel
        /Applications/Creative Professional/E-MU USB Audio/E-MU USB Audio Uninstaller.app
        - com.emu.Uninstaller
        /Applications/DivX/DivX Preferences.app
        - com.divx.divxprefs
        /Applications/DivX/Uninstall DivX for Mac.app
        - com.divxinc.uninstalldivxformac
        /Applications/Epson Software/EPSON Scan Settings.app
        - com.epson.scan.settingutility
        /Applications/Epson Software/EPSON Scan.app
        - com.epson.scan.standalone
        /Applications/Epson Software/Event Manager.app
        - com.epson.ProjectManager
        /Applications/Google SketchUp 8/SketchUp.app
        - com.google.sketchupfree8
        /Applications/Img2icns.app
        - net.shinyfrog.img2icns
        /Applications/Lucien.app
        - N/A
        /Applications/MacScan 2/MacScan Scheduler.app
        - com.securemac.MacScan Scheduler
        /Applications/MacScan 2/MacScan.app
        - com.securemac.MacScan
        /Applications/Microsoft Communicator.app
        - com.microsoft.Communicator
        /Applications/Microsoft Messenger.app
        - com.microsoft.Messenger
        /Applications/Microsoft Office 2011/Microsoft Document Connection.app:́n de documentos de Microsoft:
        - N/A
        /Applications/Microsoft Office 2011/Microsoft Excel.app
        - com.microsoft.Excel
        /Applications/Microsoft Office 2011/Microsoft Outlook.app
        - com.microsoft.Outlook
        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
        - com.microsoft.Powerpoint
        /Applications/Microsoft Office 2011/Microsoft Word.app
        - com.microsoft.Word
        /Applications/Microsoft Office 2011/Office/Alerts Daemon.app
        - com.microsoft.AlertsDaemon
        /Applications/Microsoft Office 2011/Office/Equation Editor.app
        - com.microsoft.EquationEditor
        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
        - com.microsoft.openxml.chart.app
        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app:́a de imágenes de Microsoft:
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
        - com.microsoft.outlook.database_daemon
        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
        - com.microsoft.outlook.database_utility
        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
        - com.microsoft.Graph
        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
        - com.microsoft.outlook.office_reminders
        /Applications/Microsoft Office 2011/Office/Microsoft Office Setup Assistant.app:́n de Microsoft Office:
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Query
        - N/A
        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
        - com.microsoft.office.uploadcenter
        /Applications/Microsoft Office 2011/Office/My Day.app
        - com.microsoft.myday
        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
        - com.microsoft.openxml.excel.app
        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
        - com.microsoft.SyncServicesAgent
        /Applications/Pure Analyzer System.app
        - com.gaelyvan.flux.pureanalysersystem
        /Applications/Remote Desktop Connection.app:́n a Escritorio remoto:
        - N/A
        /Applications/Sample Manager.app
        - com.audiofile.SampleManager
        /Applications/Smaart.app
        - Rational Acoustics
        /Applications/Soundflower/Soundflowerbed.app
        - com.cycling74.Soundflowerbed
        /Applications/StellarPhoenix.app
        - com.StellarInformationSystemLtd..StellarPhoenix
        /Applications/StuffIt 12/DropStuff.app
        - com.stuffit.DropStuff
        /Applications/StuffIt 12/MagicMenu.app
        - com.stuffit

  • XORG: Keyboard don't work right

    Hi,
    after the last System update my keyboard (under xorg) is totally messed up! The arrow keys,the del key the Pos1 key, the End key.....  all don't work. All characters numbers and special characters like(!"§$%&/....) work though. Even the German "Umlauts" are working!
    Here my xorg.conf:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
        Load        "dbe"   # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    # This loads the font modules
    #    Load        "type1"
        Load        "freetype"
    #    Load        "xtt"
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
    EndSection
    # Files section.  This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/100dpi:unscaled"
        FontPath   "/usr/share/fonts/75dpi:unscaled"
        FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #    Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    #    Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #    Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #    Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    #    Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    #    Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    #    Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    #    Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option     "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Option "XkbRules"   "xorg"
        Option "XkbModel"   "pc105"
        Option "XkbLayout"  "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
        Identifier  "Mouse1"
        Driver      "mouse"
        Option "Protocol"    "Auto" # Auto detect
        Option "Device"      "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"        "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"  "9600"
    #    Option "SampleRate"        "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
        Option "ZAxisMapping"   "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
        Identifier  "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        HorizSync   31.5 - 64.3
    #    HorizSync  30-64         # multisync
    #    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        VertRefresh 50-100
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam   256
    #    Clocks     25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
        Identifier  "** ATI Radeon (generic)               [radeon]"
        Driver      "radeon"
        #VideoRam    262144
        # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "** ATI Radeon (generic)               [radeon]"
        Monitor     "My Monitor"
        DefaultDepth 24
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1400x1050" "1280x1024" "1024x768"
            ViewPort    0 0
        EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
        Identifier  "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
        Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    #    Mode 0666
    # EndSection
    and the corresponding log:
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux stella 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
    Build Date: 05 December 2008  09:10:55PM
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  9 17:03:13 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) |   |-->Monitor "My Monitor"
    (**) |   |-->Device "** ATI Radeon (generic)               [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1,
            /usr/share/fonts/misc,
            /usr/share/fonts/100dpi:unscaled,
            /usr/share/fonts/75dpi:unscaled,
            /usr/share/fonts/TTF,
            /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5900
    (II) Module ABI versions:
            X.Org ANSI C Emulation: 0.4
            X.Org Video Driver: 4.1
            X.Org XInput driver : 2.1
            X.Org Server Extension : 1.1
            X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xa8000000/0, 0xe0010000/0, I/O @ 0x0000c100/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            Module class: X.Org Server Extension
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
            compiled for 1.5.3, module version = 2.1.0
            Module class: X.Org Font Renderer
            ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 6.9.0
            Module class: X.Org Video Driver
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON: Driver for ATI Radeon chipsets:
            ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
            ATI Radeon Mobility X300 (M24) 3152 (PCIE),
            ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
            ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
            ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
            ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
            ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
            ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
            ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
            ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
            ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
            ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
            ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
            ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
            ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
            ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
            ATI Radeon X800PRO (R420) JI (AGP),
            ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
            ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
            ATI Radeon Mobility 9800 (M18) JN (AGP),
            ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
            ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
            ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
            ATI Radeon Mobility M7 LW (AGP),
            ATI Mobility FireGL 7800 M7 LX (AGP),
            ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
            ATI FireGL Mobility 9000 (M9) Ld (AGP),
            ATI Radeon Mobility 9000 (M9) Lf (AGP),
            ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
            ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
            ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
            ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
            ATI Radeon 9800XT NJ (AGP),
            ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
            ATI Radeon Mobility 9600 (M10) NQ (AGP),
            ATI Radeon Mobility 9600 (M11) NR (AGP),
            ATI Radeon Mobility 9600 (M10) NS (AGP),
            ATI FireGL Mobility T2 (M10) NT (AGP),
            ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
            ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
            ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
            ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
            ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
            ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
            ATI Radeon Mobility X300 (M22) 5460 (PCIE),
            ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
            ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
            ATI Radeon X800PRO (R423) UI (PCIE),
            ATI Radeon X800LE (R423) UJ (PCIE),
            ATI Radeon X800SE (R423) UK (PCIE),
            ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
            ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
            ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
            ATI FireGL unknown (R423) UR (PCIE),
            ATI FireGL unknown (R423) UT (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility FireGL V5000 (M26) (PCIE),
            ATI Mobility Radeon X700 XL (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Mobility Radeon X700 (M26) (PCIE),
            ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
            ATI Radeon Mobility 9100 IGP (U3) 5835,
            ATI Radeon XPRESS 200 5954 (PCIE),
            ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
            ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
            ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
            ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
            ATI Radeon XPRESS 200M 5975 (PCIE),
            ATI Radeon XPRESS 200 5A41 (PCIE),
            ATI Radeon XPRESS 200M 5A42 (PCIE),
            ATI Radeon XPRESS 200 5A61 (PCIE),
            ATI Radeon XPRESS 200M 5A62 (PCIE),
            ATI Radeon X300 (RV370) 5B60 (PCIE),
            ATI Radeon X600 (RV370) 5B62 (PCIE),
            ATI Radeon X550 (RV370) 5B63 (PCIE),
            ATI FireGL V3100 (RV370) 5B64 (PCIE),
            ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
            ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
            ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
            ATI Mobility Radeon X800 XT (M28) (PCIE),
            ATI Mobility FireGL V5100 (M28) (PCIE),
            ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
            ATI Radeon X850 XT PE (R480) (PCIE),
            ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
            ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
            ATI Radeon X850 XT (R480) (PCIE),
            ATI Radeon X800XT (R423) 5D57 (PCIE),
            ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
            ATI Radeon X700 PRO (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
            ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
            ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
            ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
            ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
            ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
            ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
            ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
            ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
            ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
            ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
            ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
            ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
            ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
            ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
            ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
            ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
            ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
            ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
            ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
            ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
            ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
            ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
            ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
            ATI Mobility Radeon X1700, ATI Radeon X2300HD,
            ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
            ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
            ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
            ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
            ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
            ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
            ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
            ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
            ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
            ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
            ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
            ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
            ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
            ATI Radeon 4800 Series, ATI RV610, ATI Radeon HD 2400 XT,
            ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
            ATI RV610, ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
            ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
            ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
            ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, ATI RV630,
            ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
            ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
            ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
            ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
            ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
            ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
            ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
            ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
            ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
            ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
            ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
            ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b]
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b]
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b]
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b]
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): MMIO registers at 0x00000000e0010000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.1.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
    (--) RADEON(0): Linear framebuffer at 0x00000000a8000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 390.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=20000
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: AUO                     
    (II) RADEON(0): Panel Size from BIOS: 1400x1050
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1400, YRes: 1050, DotClock: 108000
    HBlank: 240, HOverPlus: 48, HSyncWidth: 112
    VBlank: 15, VOverPlus: 1, VSyncWidth: 3
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL
    (II) RADEON(0): Port0:
    Monitor   -- AUTO
    Connector -- VGA
    DAC Type  -- Primary
    TMDS Type -- None
    DDC Type  -- 0x60
    (II) RADEON(0): Port1:
    Monitor   -- AUTO
    Connector -- LVDS
    DAC Type  -- None
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): Port2:
    Monitor   -- AUTO
    Connector -- STV
    DAC Type  -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type  -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1400x1050
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.0.0
            ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 1.2.0
            ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1920
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
            of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
            [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[b]
            [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[b]
            [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[b]
            [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[b]
            [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
            [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
            [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
            [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[b]
            [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[b]
            [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
            [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit a8000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Disabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0):   mem_size         : 0x04000000
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
    (II) RADEON(0): Reserved area from (0,1200) to (1408,1202)
    (II) RADEON(0): Largest offscreen area available: 1408 x 6989
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0xd10000
    (II) RADEON(0): Will use depth buffer at offset 0x1382000
    (II) RADEON(0): Will use 38912 kb for textures at offset 0x19f4000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xa8000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (==) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xb0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb37a2000
    (II) RADEON(0): [agp] ring read ptr handle = 0xb0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb7f7a000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xb0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb35a2000
    (II) RADEON(0): [agp] GART texture map handle = 0xb0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb1922000
    (II) RADEON(0): [drm] register handle = 0xe0010000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0x1fff0000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 10
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0):   MC_FB_LOCATION  was: 0xabffa800 is: 0xabffa800
    (WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xb1ffb000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
            Screen to screen bit blits
            Solid filled rectangles
            8x8 mono pattern filled rectangles
            Indirect CPU to Screen color expansion
            Solid Lines
            Scanline Image Writes
            Setting up tile and stipple cache:
                    32 128x128 slots
                    32 256x256 slots
                    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00674c00
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00678e00
    (II) RADEON(0): Largest offscreen area available: 1408 x 6983
    (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 1.0.0
            ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xabffa800 0xabffa800
    (II) RADEON(0):   MC_AGP_LOCATION  : 0xb1ffb000
    restore common
    restore crtc1
    restore pll1
    finished PLL1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 370 x 277
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
            compiled for 1.5.3, module version = 0.99.1
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.99.1
    (**) Option "Device" "/dev/input/event8"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device Logitech USB Receiver
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
            compiled for 1.5.2, module version = 2.0.7
            Module class: X.Org XInput Driver
            ABI class: X.Org XInput driver, version 2.1
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event4"
    (II) Logitech USB Receiver: Found keys
    (II) Logitech USB Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) Logitech USB Receiver: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) Logitech USB Receiver: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech USB Receiver: xkb_layout: "us"
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event3"
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found mouse buttons
    (II) Logitech USB Receiver: Configuring as mouse
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (II) config/hal: Adding input device C-Media USB Headphone Set
    (**) C-Media USB Headphone Set: always reports core events
    (**) C-Media USB Headphone Set: Device: "/dev/input/event2"
    (II) C-Media USB Headphone Set: Found keys
    (II) C-Media USB Headphone Set: Configuring as keyboard
    (II) XINPUT: Adding extended input device "C-Media USB Headphone Set" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) C-Media USB Headphone Set: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) C-Media USB Headphone Set: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) C-Media USB Headphone Set: xkb_layout: "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) AT Translated Set 2 keyboard: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) AT Translated Set 2 keyboard: xkb_layout: "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1400x1050
    (II) RADEON(0): Adding Screen mode: 1280x1024
    (II) RADEON(0): Adding Screen mode: 1024x768
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    sorry for this huge post - but i think that's all needed.... so does anybody have a clue?
    thanks and bye
    smax

    Thanks Bob for that very fast reply!
    But neither "Modifying hal configuration" nor "Using the Desktop Environment settings" (xfce) worked. So I tried the "I don't want this crap, how do I turn it off?" solution and well it works
    Maybe I turn it back on in a month or so.. but for now i'm fine with no hot plugging but a working keyboard...
    Thanks and Bye!
    smax
    Last edited by smaxer (2008-12-09 17:42:43)

  • [SOLVED] Poweroff, suspend and hibernate don't work

    I installed Archlinux on my work desktop on Monday and can't get poweroff, suspend and hibernate to work. The command `systemctl poweroff` sort of works, except it doesn't actually turn off the computer. Suspend and hibernate don't work at all, the computer hangs on the terminal with a cursor on the top left corner of the screen. Here is the log from `journalctl`. There doesn't seem to be any error messages in it, as far as I can see.
    Apr 16 10:02:55 carolfs-ifusp sudo[1127]: carolfs : TTY=pts/0 ; PWD=/home/carolfs ; USER=root ; COMMAND=/usr/bin/systemctl poweroff
    Apr 16 10:02:55 carolfs-ifusp sudo[1127]: pam_unix(sudo:session): session opened for user root by carolfs(uid=0)
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c2 of user carolfs.
    Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
    Apr 16 10:02:55 carolfs-ifusp org.gnome.evolution.dataserver.Sources3[591]: Received terminate signal.
    Apr 16 10:02:55 carolfs-ifusp colord[453]: Automatic remove of icc-9cb50954c1872204852075bef0599dec from xrandr-Goldstar Company Ltd-W2043-16843009
    Apr 16 10:02:55 carolfs-ifusp colord[453]: Profile removed: icc-9cb50954c1872204852075bef0599dec
    Apr 16 10:02:55 carolfs-ifusp colord[453]: device removed: xrandr-Goldstar Company Ltd-W2043-16843009
    Apr 16 10:02:55 carolfs-ifusp polkitd[358]: Unregistered Authentication Agent for unix-session:c2 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Apr 16 10:02:55 carolfs-ifusp ntpd[300]: ntpd exiting on signal 15
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c2 of user carolfs.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Session c1 of user gdm.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Session c1 of user gdm.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Sound Card.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Sound Card.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-systemd\x2dfsck.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-systemd\x2dfsck.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping system-getty.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice system-getty.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping User Manager for UID 1000...
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Disk Manager...
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Service...
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Default.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Default.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Login Prompts.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Default.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Default.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Login Prompts.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Basic System.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Basic System.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping GNOME Display Manager...
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Basic System.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Basic System.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Starting Generate shutdown-ramfs...
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Paths.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Paths.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Paths.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Paths.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Timers.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Timers.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Timers.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped RealtimeKit Scheduling Policy Service.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Timers.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopping Sockets.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopping Sockets.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Locale Service.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Stopped target Sockets.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Stopped target Sockets.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Shutdown.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Disk Manager.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Shutdown.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Reached target Shutdown.
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Reached target Shutdown.
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Starting Exit the Session...
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Starting Exit the Session...
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping Network.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped target Network.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping dhcpcd on all interfaces...
    Apr 16 10:02:55 carolfs-ifusp systemd[567]: Received SIGRTMIN+24 from PID 1159 (kill).
    Apr 16 10:02:55 carolfs-ifusp systemd[386]: Received SIGRTMIN+24 from PID 1160 (kill).
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 120.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped User Manager for UID 1000.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-1000.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-1000.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopping user-120.slice.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Removed slice user-120.slice.
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: sending signal TERM to pid 264
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: waiting for pid 264 to exit
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: received signal TERM from PID 1161, stopping
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: eno1: removing interface
    Apr 16 10:02:55 carolfs-ifusp systemd[387]: pam_unix(systemd-user:session): session closed for user gdm
    Apr 16 10:02:55 carolfs-ifusp systemd[568]: pam_unix(systemd-user:session): session closed for user carolfs
    Apr 16 10:02:55 carolfs-ifusp gnome-session[576]: Received signal:15->'Terminated'
    Apr 16 10:02:55 carolfs-ifusp gdm-session-worker[383]: <3>GLib: Source ID 71 was not found when attempting to remove it
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: AT Translated Set 2 keyboard: Close
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Microsoft Microsoft Basic Optical Mouse : Close
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) evdev: Power Button: Close
    Apr 16 10:02:55 carolfs-ifusp gdm-Xorg-:0[336]: (II) UnloadModule: "evdev"
    Apr 16 10:02:55 carolfs-ifusp org.freedesktop.Tracker1[591]: Received signal:15->'Terminated'
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: sending signal TERM to pid 264
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[1161]: dhcpcd[1161]: waiting for pid 264 to exit
    Apr 16 10:02:55 carolfs-ifusp dhcpcd[264]: exited
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: Stopped Login Service.
    Apr 16 10:02:55 carolfs-ifusp systemd[1]: dhcpcd.service: main process exited, code=exited, status=1/FAILURE
    Apr 16 10:02:55 carolfs-ifusp mkinitcpio[1145]: ==> Starting build: none
    Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: -> Running build hook: [sd-shutdown]
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped dhcpcd on all interfaces.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unit dhcpcd.service entered failed state.
    Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (II) NVIDIA(GPU-0): Deleting GPU-0
    Apr 16 10:02:56 carolfs-ifusp gdm-Xorg-:0[336]: (EE) Server terminated successfully (0). Closing log file.
    Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-password' with active job
    Apr 16 10:02:56 carolfs-ifusp gdm[295]: Freeing conversation 'gdm-launch-environment' with active job
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped GNOME Display Manager.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Permit User Sessions...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Permit User Sessions.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Basic System.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Basic System.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Slices.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Slices.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping User and Session Slice.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Removed slice User and Session Slice.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Paths.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Paths.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Timers.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Timers.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily man-db cache update.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily man-db cache update.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily verification of password and group files.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily verification of password and group files.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily rotation of log files.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily rotation of log files.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Daily Cleanup of Temporary Directories.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Daily Cleanup of Temporary Directories.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Sockets.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Sockets.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Device-mapper event daemon FIFOs.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed Device-mapper event daemon FIFOs.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping LVM2 metadata daemon socket.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed LVM2 metadata daemon socket.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping D-Bus System Message Bus Socket.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Closed D-Bus System Message Bus Socket.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping System Initialization.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target System Initialization.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Apply Kernel Variables...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Apply Kernel Variables.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Setup Virtual Console...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Setup Virtual Console.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Encrypted Volumes.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Encrypted Volumes.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Load/Save Random Seed...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Update UTMP about System Boot/Shutdown...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Swap.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Swap.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivating swap Swap Partition...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remote File Systems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Remote File Systems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Load/Save Random Seed.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Update UTMP about System Boot/Shutdown.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Create Volatile Files and Directories...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Create Volatile Files and Directories.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000/gvfs...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/120...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /boot...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /home...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting Temporary Directory...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partuuid/748828e6-d06b-4dc9-a1ee-94e2bf6e2d41.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-partlabel/swap.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x5000c500242cde85-part2.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST3500418AS_5VM96G8V-part2.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap /dev/disk/by-uuid/59c506eb-3a40-4eae-8048-317bcc3d00fb.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Deactivated swap Swap Partition.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000/gvfs.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted Temporary Directory.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounting /run/user/1000...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/120.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /boot.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping EFI System Partition Automount.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unset automount EFI System Partition Automount.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /run/user/1000.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Unmounted /home.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Unmount All Filesystems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Unmount All Filesystems.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Local File Systems (Pre).
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped target Local File Systems (Pre).
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopping Remount Root and Kernel File Systems...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Stopped Remount Root and Kernel File Systems.
    Apr 16 10:02:56 carolfs-ifusp mkinitcpio[1145]: ==> Build complete.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Started Generate shutdown-ramfs.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Shutdown.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Shutdown.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Final Step.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Reached target Final Step.
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Starting Power-Off...
    Apr 16 10:02:56 carolfs-ifusp systemd[1]: Shutting down.
    Apr 16 10:02:56 carolfs-ifusp systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    Apr 16 10:02:56 carolfs-ifusp systemd-journal[166]: Journal stopped
    Last edited by CFS (2014-05-08 12:57:13)

    Thank you for your replies. Shutdown now doesn't turn the computer off either. About the type of system, I think it was custom built. This is a new install from Monday, so I didn't update the kernel. Poweroff, suspend and hibernate have never worked. The requested output:
    $ uname -a
    Linux carolfs-ifusp 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
    $ pacman -Qi linux
    Name : linux
    Version : 3.14.1-1
    Description : The Linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licenses : GPL2
    Groups : base
    Provides : kernel26=3.14.1
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 71136.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Mon 14 Apr 2014 03:42:52 PM BRT
    Install Date : Mon 14 Apr 2014 07:50:11 PM BRT
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • USB ports don't work - 880GMS

    http://
    HELP ME
    My usb ports work fine until Sunday, I restart the W8 OS and they don't work (my last activity was configure a router but I didn't install anything). I've two OS (W8 and Ubuntu 11.1) and I tried all and my USB ports don't work. I don't have any idea about the cause of the problem. All work fine except my USB ports. They are enable according to the BIOS but the OS (W8, W7 or Ubuntu) doesn't recognize any device.
    I tried this things:
    - Change my porwer supply
    - Restart the BIOS to the Fail-Safe and Optimal value default
    - Clear the CMOS (Changing the jumper and remove the battery)
    - Remove the W8 and install W7
    - Remove W7 and install Ubuntu 11.04
    - Flash the BIOS to the last update (it's the same that was loaded in the BIOS)
    Currently, I don't know what I must do it. I'm really disappointed with this board (MSI 880GMS-E35). This is my second problem with these model. Previously, I've one and it didn't supply the energy to start the proccesor (Phenon X4 955). My actual board works fine until Sunday.
    Please help me to solve the problem.

    OK, I have no idea but fortunately my usb ports work fine now.
    I don't know how to fix the problem. But I can assure that thanks to Ubuntu it's fixed. My last two operations were:
    - Flash the BIOS
    - Check lsusb
    Yesterday, I'm full disappointed and I was going to prepare my hard discussion with my provider when suddenly I found a this post:
    http://askubuntu.com/questions/69594/my-usb-ports-randomly-stop-working-till-a-reboot
    But before to enter the command in the Ubuntu's console, I saw that my USB devices work. It's amazing!!! I'm a newer electronic engineer and I saw events similar that this more than once time in my labs (Typical student experiences).
    If anyone has the same problem, I could recommend:
    - Check BIOS usb options
    If these are ok, else enable the propertly options
    - Check # lsusb (In Linux)
    If your ports don't appear check the PSU (Maybe there are others things that you should check) else
    - Check # dmesg | tail (Before and after to connect a usb device)
    If there is an error saw in forums, maybe it's the common problem so far (Incompatibility in the kernel -error hci-)
    - Type # acpi = force irqpoll
    ELSE
    - Flash the bios as show in this forum
    ACLARATION: I think that this algorithm might help you but I don't prove this. It's your responsible to do that. I only write the items that I learn with this issue.
    CONCLUSION: I don't wish that anyone has this problem. I lost one week trying to solve it.
    POST RELATED TO USB DON'T WORK CAUSE PROBLEM (ABOUT dmesg and interpretation)
    https://bbs.archlinux.org/viewtopic.php?id=102553
    POST RELATED TO FLASH THE BIOS
    https://forum-en.msi.com/index.php?PHPSESSID=0uaa1psa1gln707een5uu6sb16&topic=138659.0

  • Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work

    Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work. I can't uninstall program. Error upon error.

    Hi John,
    I'm trying to install the SunMC 3.5.1 Console on
    Windows XP with not much success. The install
    displays the initial splash screen, but then fails
    with the error :
    The install wizard cannot proceed.
    Aborting installation now...First, are you installing from a complete SunMC CD or CD image? If you just copied some files out of a CD/image you may have missed some jar files.
    SunMC Consoles don't like to share systems with older versions of themselves. Try moving/renaming the directory your 3.5 Console is installed in (or uninstall it if you don't need it),... then try putting 3.5.1 in again.
    All my demos/work/courses are on 3.5.1 on an XP laptop, so I know it works.
    I think it's probably just not happy about 3.5 already being installed... so just move it out of the way for awhile to get 3.5.1 in (then put 3.5 back so you can have them both).
    Regards,
    Mike
    The Java version is 1.4.2_03 .
    The Release Notes etc don't give any clues.
    Strangely, SunMC 3.5 works fine on this desktop..
    Any ideas as to where I can go from here? This is
    effectively stopping me from going from SMC 3.5 to
    3.5.1, unless I can get the Console working..
    Has anyone else had problems with SMC 3.5.1 on XP?
    Thanks in advance.
    John

  • Javascript games that work in IE don't work in Firefox - why?

    Why can't I get javascript games that work in IE to work in Firefox? The javascript games show up on the page but not in the correct format and the scripts don't work. An example is here: http://www.cornwallfoodandfarming.net/games/KS1-summer-in-farm3/picture-memory.htm
    When you open it in IE you can see what it should do!
    Any help gratefully received. Cheers...Paul

    That particular game was created a long time ago... in the age of Netscape version 4.
    Netscape version 4 had proprietary objects named layers that are no longer supported in Firefox, so the game fails because it assumes that Firefox supports layers. You can see this if you open Tools > Error Console and scroll to the end of the long list after clicking the link to start the game.
    If you think the developers of this site might be willing to update the game, let them know about this problem.
    If not, and the game is very important to you, you could try Chris Pederick's User Agent Switcher extension (Tools > Add-ons > Get Add-ons) to make Firefox temporarily masquerade as an old version of Internet Explorer. There's no guarantee that will make the game work in Firefox, but it has a better chance than what you get now.

  • OnDisconnect don't work in FCS

    Hello,
    I just install FCS in Fedora Core 4 and have 2 problems:
    - cannot restart the server from admin console, I receive
    this message:
    Restart of server: Unsuccessful
    error description:Failed to start server.
    - some user remain in user list after they leave from room,
    so onDisconnect function don't work anytime
    Applications which I use work fine on other servers, how can
    I solve this problems? I know Fedora Core 4 is not in macromedia
    requirments for FCS but many people install FCS and work good in
    this platform.

    Nobody can help me?

  • Audigy 2ZS PCMCIA notebook card most functions don't work with Vi

    As I've found out the hard way many of the features of this card don't work due to Vista, I've spent hours reading the many problems associated with the different cards and vista, I cannot find the recording source Line in with the Creative media source player so I cannot transfer music from cassette?or Vinyl?to MP3 or what ever. The mixer and?equilizer?won't work either, as with the smart management volume normalization, I've reinstalled the drivers as per the advice of many still doesn't solve my problems. Would be nice if some of these feartures worked as that's the reason for buying the card. Don't bother contacting customer support they don't get back to you. Any help out there?

    Okay, God knows how it happened but I have sound again
    I opened the Creative Audio Console and pushed reestablish standards and now it goes.
    I still got a nasty crackling but that's a minor evil

  • Parts of pages don't work in ALL web browsers?

    There's a site where I'm a registered user and have a profile page. One one of my PowerBook G4s, all the frames and content appear fine and I can use the tabs and pull-down menus no matter which browser I use (Safari or Firefox). On my other PB G4 though, these things don't work no matter WHICH browser I use--I've tried Safari, Firefox and Camino. Under the content tabs, there is no content and I can't highlight the other tabs. If I click on a pull-down menu, nothing appears.
    I tried emptying the cache of all of them. I went through all the preferences for each browser and for system prefs and matched them to what's on the PB G4 that works--but these items still don't work on the one laptop. Obviously this isn't a browser issue so I'm thinking it has something to do with the operating system? Any help would be greatly appreciated. Thanks!

    Here's the Terminal output:
    Kim-St-Ours-Computer:~ kimstours$ ifconfig
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:0d:93:af:7e:10
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::20d:93ff:fe8b:5810%en1 prefixlen 64 scopeid 0x5
    inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
    ether 00:0d:93:8b:58:10
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:0d:93:ff:fe:af:7e:10
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    Kim-St-Ours-Computer:~ kimstours$
    Console log just keeps repeating this:
    2007-01-04 18:49:34.336 SyndicationAgent[2281] WARNING: BestCalendarDateFromString - can't interpret: 'Thu 04 Jan 2007 16:58:48 -800'
    System log:
    Jan 4 18:27:33 Kim-St-Ours-Computer STMStart: kCGErrorRangeCheck : Window Server communications from outside of session allowed for root and console user only
    Jan 4 18:27:37 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Jan 4 18:27:38 Kim-St-Ours-Computer AL_CX11-1: ATSFontGetPostScriptName failed: error -984.
    Did that tell us something?

  • Mouse wheel don't work.

    Mouse wheel don't work
    This is my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "xtrap"
    Load "record"
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbLayout" "es"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    VertRefresh 60.0 - 75.0
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "HWCursor" # [<bool>]
    #Option "SWCursor" # [<bool>]
    #Option "ShadowFB" # [<bool>]
    #Option "Rotate" # [<str>]
    #Option "UseBIOS" # [<bool>]
    #Option "LCDClock" # <freq>
    #Option "ShadowStatus" # [<bool>]
    #Option "CrtOnly" # [<bool>]
    #Option "TvOn" # [<bool>]
    #Option "PAL" # [<bool>]
    #Option "ForceInit" # [<bool>]
    #Option "Overlay" # [<str>]
    #Option "TransparencyKey" # [<str>]
    #Option "ForceInit" # [<bool>]
    #Option "DisableXVMC" # [<bool>]
    #Option "DisableTile" # [<bool>]
    #Option "DisableCOB" # [<bool>]
    #Option "BCIforXv" # [<bool>]
    #Option "DVI" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "DmaType" # [<str>]
    #Option "DmaMode" # [<str>]
    #Option "AGPMode" # <i>
    #Option "AGPSize" # <i>
    #Option "DRI" # [<bool>]
    Identifier "Card0"
    Driver "savage"
    VendorName "S3 Inc."
    BoardName "86C270-294 Savage/IX-MV"
    BusID "PCI:1:1:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    And also I try both in wiki http://wiki.archlinux.org/index.php/Xor … ot_working
    Mouse wheel not working
    The "Auto" protocol doesn't seem to work properly in Xorg 7 any more. In the InputDevice section for your mouse, change:
    Option "Protocol" "auto"
    to
    Option "Protocol" "IMPS/2"
    or
    Option "Protocol" "ExplorerPS/2"
    What more can I do?

    my xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "xtrap"
    Load "dbe"
    Load "dri"
    Load "GLcore"
    Load "glx"
    Load "extmod"
    Load "record"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    Identifier "Monitor0"
    VendorName "CPT"
    ModelName "13a6"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "composite" "enable"
    EndSection
    i have not have a problem with -- Option "Protocol" "auto" 
    you should check the output of xev with your mouse over the window and see some output (in the console you launced from) like this:
    ButtonPress event, serial 31, synthetic NO, window 0x3400001,
    root 0x6a, subw 0x0, time 20177357, (148,61), root:(699,395),
    state 0x0, button 5, same_screen YES
    ButtonRelease event, serial 31, synthetic NO, window 0x3400001,
    root 0x6a, subw 0x0, time 20177357, (148,61), root:(699,395),
    state 0x1000, button 5, same_screen YES
    ButtonPress event, serial 31, synthetic NO, window 0x3400001,
    root 0x6a, subw 0x0, time 20178421, (148,61), root:(699,395),
    state 0x0, button 4, same_screen YES
    what kind of mouse is it? google <mouse brand>+linux ? anything in dmesg about it? USB? what does `lsusb -vs XXX:YYY` say about it?
    just some places to look.
    hth

  • License installed: Memleak & JRA Recording still don't work on remote srv

    This a JRockit 28.1.1 version on a remote server.
    As noted, a "LIC-JRMC50" license has been installed into its jre, but the memory leak and jra recording functions from the local xp based Mission Control 3.0.5 still don't work.
    The connector to the remote server is working, as I can open console and see its workings.
    When attempting to start Memory Leak an error is shown:
    Caused by: javax.management.InstanceNotFoundException: bea.jrockit.management:type=MemLeak
         at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
    When trying to start JRA Recording a message is shown that says something like "No Options could be retrieved for this connector. Make sure you're connected to a Jrockit instance..".
    Any suggestions would be appreciated.

    JRockit 28.1.1 should work better with Mission Control 4.0.1 (which should be bundled together with JRockit R28.1.1)
    JRockit 27 versions use JRA, JRockit 28 versions use FlightRecorder instead.
    Mission Control 4.0.1 requires not license file.
    Klara, Mission Control QA

Maybe you are looking for

  • Sharing Itunes on the same Computer with 2 users

    This is probably really basic - I have created a second user account on my puter and no matter what I do to allow access to Itunes the second user cannot access the files. I have copied the files and placed them in the music folder (twice) for that u

  • Unmountable_boot_volume on A10 - Where I can find a recovery cd?

    All of a sudden I had a boot error - Unmountable_boot_volume and the computer refuses to boot even with safe mode. I tried with Microsoft window XP recovery and it seems that the hard drive is badly "damaged", it wont even do a directory listing and

  • Ipod wont work in itunes

    i plugged my ipod into the computer and opened itunes and nothing happened. it didnt say "do not disconect" on the ipod or anything. did u press a button or sumthing?

  • Combine floor() and ceiling() functions

    I need to combine the functionality provided by both floor() and ceiling() functions using normal pl/sql function or proc. and without using any built-in functions in it.

  • How do I run 2 or more VIs simultaneously?

    Hi. I'm trying to create an application, where I need two or more VIs running at the same time. My problem is that when I call a subVi, my main VI is frozen until the subVI finishes. Does anyone know how to programmatically call/open/run a VI or subV