Console launcher for 7

Quote : ?CSL_PCAPP_LB_2_6_09.exe?
This download contains the Creative Console Launcher application for use with your Sound Blaster? X-Fi? series of audio devices on Microsoft? Windows Vista? and Windows? XP. For more details, read the rest of this web release note.
The Question is : I want to install Windows 7 on my computer. Is This version of console launcher working on 7?

I have used Console Launcher under Vista and Windows 7 with no problems. I used to use the Daniel K. package, but now I am running stock software.
The launcher showed up after using Windows Update. Windows Update installed a Microsoft Certified driver on my system, and then I used AutoUpdate. It found the Console Launcher,etc. They installed fine. The two things that did not install quite as easily were the Dolby and DTS Connect packs. For those, they gave an error message. I simply right clicked those and chose properties and then administrator and VISTA SP. No problems whatsoever.
The only problem I have is, if you leave DOLBY OR DTS enabled in the tray icon, your system will hang at shutdown.

Similar Messages

Audio Console/Creative Console Launcher for X-FI Fatal1ty Champi

Hey all, I was just wondering if any of you had the same problem out there. For some reasons all of the sudden, both Audio Console and Creative Console Launcher aren't showing any speaker settings or CMSS-3D at all, as if they were removed from them completely. When i run THX Console it crashes... Is there a way to fix this issue? This is all in Windows Vista 32bit. I'm Using:
P4P800
Pentium 4 2.8 Ghz
2.5 GB of ram
500 GB Sata2 Hard Dri've (Vista installed)
250 GB Sata, 00 GB IDE, & 60 GB IDE Hard Dri'ves (storage)
28 MB ATI Radeon 9800
Creative X-FI Fatalty Champion (similar to Platinum)Message Edited by Unk_chaos on 0-03-200807:55 AM

Creative Console Launcher for Gaming Headsets

I have the HS-1000 and recently had to reload my system due to a hard drive crash. I really like using the console that installs off the disk that came with my headset but i have lost my disk and would like to know where i can get the console software. I have already tried to install the software that is on the downloads page but it will not install since i do not have the original software install. Any ideas?
Thanks in Advance

Hello Shadowkobra,
Welcome to Creative forums!
I am not sure on this but try contacting customer service. Maybe they could send you a replacement. Here's the email support link.

X-Fi Audio Console Launcher not in system t

Since my new install of Windows, I can't get the Console Launcher for my X-Fi Elite Pro in the system tray anymore. On my previous install it was there from first install, even after updating the software and drivers, but now it seems to have dissapeared. I'm really disappointed as this (for me) by far the easiest way to change mode and/or entering the console for settings editing. I tried to update the drivers, but no luck... it's still not back. It seems like a fairly easy problem to fix, but I can't find any option to check/uncheck system tray icon availability. Can anyone help me out on this one? How can I get the system tray icon back in the system tray? Thanks in advance!?By the way, I'm running Windows XP Pro UK with the latest X-Fi Elite Pro?drivers and onboard HD Audio disabled in the BIOS. Software of HD Audio is also removed.

Mine hasn't been resetting....so far. I know mines a Fatalty but sw wise it should be same for all the cards. The only thing I can think of is that it has something to do with option for syncing with control panel. I have that option unchecked in the creative mixer speakers tab. Maybe try disabling it if its currently enabled and see if that stops the resetting. No idea if it will help but thats the only thing I can think of, can't hurt to at least give it a shot.
Hope it helps

Console Launcher

Does any one have a working console launcher for Windows 7 and the xtreme gamer?Creative seems to be going for the guiness record for the longest beta ever for their console launcher. I've tried unpacking the console launcher from the many suites in the forums but it won't install,always errors out. Thanks for your help in advance.

if you want, try this
http:// forums.creative.com/t5/Sound-Blaster/New-X-FI-Titanium-HD-Drivers-dated-2-0-20/m-p/569905#M5930

Creative console launcher go

I seem to have lost the creative console launcher for my X-Fi card to start up into the taskbar on the bottom right side . How do I get it back there? I can open it from the taskbar but when I want to change modes I don't want to do all that.

Are you sure your not confusing console with the rater excellent free app called XFI mode changer by Spectra9. Here's a link to the site http://www.freewebs.com/spectra9/xfmc.html

Starting EAS is very slow -Web Launcher for Administration Services Console

Hi all,
When a user has not been connected to EAS for more or less amount of time
starting the EAS via (Web Launcher for Administration Services Console) takes a very long time.
When ESA is started also opening the “Essbase Server” node and then also opening the “Application” node takes a long time.
This a very annoying.
Is there any chance to accelerate this?
Any hint is welcome.
Thank you in advance!
Andre

Hi,
Oh sorry, I forgot to mention: Version 11.1.2.1 in a distributed environment Win2008R3 64bit.
From one of the servers I also used EAS with the same outcome - well seems the Service behind is the same one.
And as I wrote this is not always case. for example just this morning it was fast as I expected it to be.
However there must be a reason for the occasional slowliness and customers usually has less understanding for suche an up and down of performance.
Any idea?
Thank you in advance!
Andre

Creative Console Launcher XFi for Win7

Does anybody have a clue as to if/when creative labs will release Win7 compatible Creative Console Launcher Programs for the X-Fi Cards?
This thread is intended particularly to be responded by a CL forum admin!

I understand that you wanted an Admin response. KokChoy has responded so I wanted you to know that I am using the latest console launcher download for the card and it has worked in Windows 7 very very well. If you are wanting a "Certified" one, you are wasting your time as 2.62.00 works with no compatibility issues for me.

Problem With Console Launcher

| A buddy of mine has the Titanium Fatality Champion and updated to all the latest drivers and stuff... but now his console launcher is not in the task bar AND on top of that... its a garbage looking one with little tabs and not the nicer GUI one. how can he get the nice GUI one and task bar icon back? If anyone could post a step by step I would very much appreciate it.

! The garbage looking one with little tabs is called Creative Audio Control Panel while Console Launcher a separate program and download with the nice gui you speak of.
Either way remove control panel and/or console launcherby using add/remove programs in windows and download the latest version of console launcher from creative support site. You should be able to find it by clicking support for your card and check the available downloads.

Where are the console launcher profiles saved (x-fi)

Everytime i install new drivers, all my equalizer settings get erased. and i have equalizer profiles for each band..
does anynone know where these are stored on win7 64bit, or any OS. I kind of want to back them up
thx in advance for any help

Since this was a question I had too, and Google brought it up as the 1st hit for the search parameter "creative console launcher where equalizer settings saved", I thought I'd post the answer for future reference.
Using Win 7 Pro x64
Look here:
C:\ProgramData\Creative\CADI\Preset
For this data file:
PCI_BUS1102-5-2C1102-EC00U{1}.PCI+VEN_1102&DEV_0005&SUBSYS_002C1102&REV _00+4&1B00B4D9&0&484.dat
I found that when I created a test preset called EQ Test, saved it, and then exited CCL, the Date Modified stamp changed to the current date and time.
That's more than likely the file to backup so you don't have to re-enter EQ settings. Like a lot of you, this issue has been driving me nuts when you have something tweaked just right. Creative Labs UI developers need to think a little harder when creating these types of programs.

There is no mode switcher on my Audio Console launcher.

I have the Soundblaster X-Fi Extreme card and downloaded some time ago the console launcher. The application on the site says the version currently available dates from 2007. I open up the launcher but do not have the modes tab at all. Why is that? How can I get a version that has it? I want to use the audio creation console.
Any assistance would be appreciated. Creative Audio Console Launcher panel .jpg

Originally Posted by KokChoy-CL
Hi,
Sorry about that, I have removed the spam and banned the spammer.
Thank you for your prompt response. This is my first time on this forum and hope that I can get some help with this issue. I'm very glad this forum uses this format you've recently adopted. I believe it's the same as the one on my Ubuntu Forum. It's a sad thing that this kind of rubbish shows up everywhere nowadays.

Very slow Console Launcher in Win 7 on X-Fi Notebook wireless

=? Hello,
i have problem with the Creative Console Launcher and Creative Audio Control Panel. I use Win 7 and they work slow - CCL and CACP run's in about 5 second's, and when CCL is already runned switching between options take about -2 seconds. I have laptop lenovo n200 with pentium dual core ,8GHz, 2GB RAM...
I have this programs in latest version, drivers too. Operating system is clean - i dont have any mess with programs/drivers.
Also i have question about my sound card ( http://pl.europe.creative.com/produc...9&product=7988 ) - effects CMSS and Crystalizer are supported in hardware or by software ? On what chip is made that card?
Thank for answers and sorry for my english (im study already )

didin't.... Drivers was not updated for long time, so i decided to change my sound card. Now i have Audiotrak Dr DAC Nano - sound is better and no drivers = no problems ;]

Sb x-fi xtreme audio console launcher problems on windows 7 32bit

Asb x-fi xtreme audio console launcher problems on windows 7 32bit'sI recently installed windows 7, because I was tired from Windows XP, but unfortunately after installing all the drivers for my hardware I realized my 5. isn't working quite as expected.
My first problem was, that the Crystalizer didn't work, after installing tons of different software, found on creative labs forums the crystalizer started working.
Then I realized that the CMSS-3D wasn't (and still isn't working). How do I fix that ? I've tried numerous ways but nothing happens, while in windows XP everything worked fine after installing the drivers.
I also miss some configuration options in the Creative Console Launcher, namely the check boxes:
?"Automatically enable headphone settings" and "Automatically mute speakers".
Where the hell did they go?! I use them, I need them. How do I get them back? Is XP somehow privileged than 7? Isn't it supposed to be the opposite?
I also can't change the speaker configuration - it's stays 5. whatever I do, and the drop-down menu with the choices is missing?! Auto-detect option doesn't work, and if it did worked - I don't need it.

To : woj2322, You may need to download and install the Dell Notebook System Software version 5.0.5. This installs patch fixes to solve the PCI ExpressCard device not work correctly. This is only for the DELL Inspiron 520 Notebook (See Below). Microsoft patch fix info below also. Also, I see there's other people that are having the same issue, maybe you to need to download and install the patch fix for your notebook's on dell's website. It's called "Dell Notebook System Software" under "System Utilities"
DELL Inspiron 520 Notebook Release Title:System Utilities: Dell Notebook System Software, Utility, Windows Vista 32-bit, Multi Language, Multi System, v.5.0.5, A00 Description:Notebook System Software is a utility that provides critical updates and patches for your operating system.More info on the download file :
http://support.dell.com/support/down...=7&fileid=9736 Direct Download :
http://ftp.us.dell.com/utility/R43625.EXE Part of what it fixes from micrsoft.When you connect a PCI ExpressCard device to a portable Windows Vista-based computer, the device may not work correctlyhttp://support.microsoft.com/ kbid=929550

Console Launcher/THX-Console do not recognise X-FI Titanium

Hi,
I bought a PCI-E SB X-FI Titanium yesterday. Unfortunatly I have got some major Problems.
First no sound was played, but I managed to fix it. Then I tried to install the Creative Console Launcher & THX. No Chance.
The Installation either won`t recognise that i have got the newest Media Player or it told me that no suitable soundcard is installed (tried different versions), although Windows recognises it as SB X-FI and sound works "fine".... Also my mic isnt working. After a whole day of searching and severals reinstallations of several driver versions I am now using the daniel k drivers .. Console Launcher and THX-Console are installed now, but if I try to start them, it tolds me that it hasnt recognized a suitable soundcard again....Mic also still isnt working, but sound is really fine. (I found a solution for the mic problem, but the console launcher is required...). Right now I'm really pi... off, and considering to send the card back and buy another one, but hopefully someone can help me, because the sound seems great to me.
Onboard sound inacti've
daniel k .
Vista home premium 64bit SP
Asus P5W DH Deluxe?
4 GB Ram (read something about it, but didnt fully understood the link between ram and soundcard)
Medusa 5. Headset
Thank you for your help in advance and sorry for my bad English.

Here is a _repeat_ of a post I did awhile ago which may be useful to you for making Titanium work and I hope it is of some benefit to you:
[color="#0000ff" size="2">Ok, good news. I was able to install the Titanium again on my Vista 32-bit home premium machine and the mic volume is loud and fine.
[color="#0000ff" size="2">Because of the way that Vista works with hardware you must have at least one time previous to this procedure gone into Control Panel/Performance Information and Tools/and click on link called Update My Score and Vista will run a 2 min hardware test and adjust itself for your hardware.
[color="#0000ff" size="2">Make sure your?microphone is plugged into the soundcard in the appropriate jack during this whole procedure (may or may not make?a difference).
[color="#0000ff" size="2">) Went into BIOS and made sure the onboard audio thing was disabled.
[color="#0000ff" size="2">I believe I also disabled the 394 port (may or may not matter).
[color="#0000ff" size="2">2) Went into Device Mgr and removed 2 of the High Definition Audio Device things in Sound and Game Controllers section and removed 2 of the High Definition Audio Device things in the System Devices sections as well.
[color="#0000ff" size="2">If you see the Soundblaster listed there too then right click it and uninstall it from there at this time.
[color="#0000ff" size="2">3) I rebooted then checked Device Mgr and it had put the High Definition Audio Device things back. I did not disable them or uninstall them this time.
[color="#0000ff" size="2">4) Using Windows Explorer I searched for and deleted any Soundblaster Drivers I could find from my system.
[color="#0000ff" size="2">5) I cleared out all of the files in my Recycle Bin.
[color="#0000ff" size="2">6) I went to www.soundblaster.com[color="#0000ff" size="2"> and downloaded the latest beta driver that ends with 2_7_0006.
[color="#0000ff" size="2">7) I extracted the drivers to a new folder I created on my C dri've. I named the folder SBFix.
[color="#0000ff" size="2">8) I made sure my antivirus program was all disabled and not protecting me.
[color="#0000ff" size="2">9) I went into?SBFix folder and double-clicked the Setup Application.
[color="#0000ff" size="2">0) It came to a menu that offered me the option to install the driver or uninstall all drivers. I selected the option to uninstall all drivers. It looked like it found some and was uninstalling them. If it asked to me to reboot I did so but I don't remember if it did or not.
[color="#0000ff" size="2">) Next I found that Setup Application again and this time I told it to install the driver. I did not select the option to overwrite any files if it found them.
[color="#0000ff" size="2">2) It installed them then wanted to reboot and I did and then I right-clicked the little speaker icon in the bottom right of my tray and click recording devices and I took a look and it looked like the soundblaster things were there. The Microphone FP and Line in were there but not the Microphone because one has to use the Creative Console Launcher to make the Microphone selection possible and I did not have that installed yet.
[color="#0000ff" size="2">3) I went back to www.soundblaster.com[color="#0000ff" size="2"> and downloaded the appropriate Creative Console Launcher and ran it.
[color="#0000ff" size="2">4) I rebooted then opened the Creative Console Launcher, went into the Settings button to make the selection for microphone.
[color="#0000ff" size="2">5) I ran the Setup Microphone wizard thingy in Windows and I could see that the volume levels were high.
[color="#0000ff" size="2">6) In the end there is no place you can do a checkbox for +20db boost however it is that loud anyway as if a +20db boost option had already been selected. After you've done the Setup Microphone test locate the mic volume slider and slide it all the way to the right again because the Setup Microphone test will have automatically moved the slider toward the left during the test.
[color="#0000ff" size="2">My system has the ASUS Rampage II Extreme x58 chipset motherboard. Intel chipset.
[color="#0000ff" size="2">Not an NVidia chipset motherboard. Somewhere I had seen somewhere on the Creative support pages that some motherboards only allow video cards to be in the PCI-e slots. I believe the NVidia chipset motherboards may be this type. This is the 2nd Intel chipset motherboard that I've been able to install the Titanium on and get proper loud mic volume. The other motherboard I got it to work fine on was an ASUS Maximus Extreme that had the x38 Express chipset.

ITunes will launch for specific admin but no other user (including root).

Mac OS X 10.6.3, iTunes 9.1.1
I have re-installed iTunes using a different admin user and even as root and the problem persists. I have repaired permissions with root as well (after trying with 2 admin users). Permissions show as being repaired.
I have never seen an issue on any *nix system where an app won't launch for root but will launch for a user.
Any ideas on how to fix it or anyone know how to completely uninstall iTunes from the system to try again from scratch?

The application starts to launch in the Dock but never finishes and I've looked all over Console's logs to try and find an error message but there isn't one. It does not bring up the "Unexpectedly Quit" dialog, either.
If you are familiar with how apps crash on the iPhone, where they just immediately exit back to SpringBoard, it is like that.
The strange thing is, my main account which is an administrator, does not have any problems launching iTunes. I only discovered this problem because I can't use the File Sharing feature of any of my iPad apps so I was using a different test login (also an admin) to troubleshoot. Then I thought maybe there was a permissions error I couldn't find so I logged in with root and the problem persisted there, too. I am thinking if I fix this error I will be able to use File Sharing (which works on the same iPad with my VAIO and Win7).
I would just re-install Mac OS X but my optical drive doesn't work any more.

Console launcher for 7

Similar Messages

Maybe you are looking for