Console management problem

Hi Friends,
I have been installed ECC6 IDES. Now i run the console management it asks password for SAP\Administrator. What is pass password? My system password is blank. How to get the forgot password.
Thanks & Regards,
Vallamuthu

Hi,
You should log on in operating system with User <sid>adm and the password you enter while installing SAP, instead of logging with the User Administrator.
Put the same password in SAP management console.
Pankaj

Similar Messages

Power management problems

A couple of weeks ago I installed quite a few of the patches in the recommended list.
Since then, I get the following message repeated continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the power.config file and in the startup scripts, but couldn't find any reference to "DPMSSet." Any ideas on the cause and solution of the message?
I never use the powerd daemon, so killing the process seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

Tables created using Enterprise Console Manager do not show up in SQLPLUS

I am struggling with Enterprise console manager and command line SQLPLUS.
I have tried scott/tiger , system/manager and the new user that I have created. But I am having the following problems:
1. I cannot connect as NORMAL through Enterprise Console Manager if I use scott/tiger OR new/paswd. Only way I can connect as NORMAL is using system/manager
2. The tables that I create using Enterprise Console Manager (while connected as system/manager in NORMAL mode) do not show up in the command line SQLPLUS. I am check this by running the following command:
SELECT OWNER, OBJECT_NAME FROM ALL_OBJECTS WHERE OBJECT_NAME LIKE '%TEST%';
While running the above command I am conected to SQLPLUS using system/manager WITHOUT SYSDBA
3. Lastly, I have a JAVA class which establishes as connection to the database using system/manager. But I can access only the tables that I create using the Enterprise Console Manager. If I create a table using command line SQLPLUS (while connected as system/manager), I cannot access it through Java program.
I am struggling with this since last morning and now I have run out ways to debug what is happening. Can anybody suggest any ways to tackle this?
Thanks in advance,
Mahesh

Prior to 11g, when you created a table or whatever, you automatically allocated one extent.
This is now no longer true and depends on a parameter I don't remember.
dba_segments is a summary of dba_extents.
Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
Sybrand Bakker
Senior Oracle DBA

WL60 Management problems

I am new to WebLogic and am charged with understanding how to make it work.
I have figured out a great deal, however there are several problems I keep
running into:
1) When I change a .war file for a configured application, occasionally I
start getting classNotFound exceptions when I try to execute the servlets.
There aren't any new classes, just changes to existing ones. Once I restart
the server all is well.
2) Sometimes when I start my server I get 'Found no context for "GET /
HTTP/1.1". This should not happen unless the default context failed to
deploy'. This happens every time I try to access the server, even through
the console. I am completely hosed and can't do anything.
Any help would be greatly appreciated.
Thanks,
Maury

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

KT4 Ultra APCI power management problems

After I boot I must go into Win98 power management propertys and apply to get any power management functions to work. And then all I can get is monitor blank and hardrive power down. Unit will not go into suspend.
If I use the suspend feature in power down the unit will go into suspend (Susp to ram) but all the fans keep running. When I come out of suspend, the system becomes unstable and quirky.
Can anyone help me get this running the way it should.
Joel Gunn
Kt4 Ultra V 1.0 Bios V 1.4 - AMD 2100 XP
Win98 Se
Nanya 256M - 333 Ram X2
Ati Radeon 7500 AIW
Enemax EG 365P -VE
Two Maxtor 80Gig Ata 133, 7200 on a Promise TX2 Ultra 133 controller.
Aopen Modem
CD rom and CDR/RW

Hi,
Check whether all the supported patches are installed.
Regards,
Dharani
SlashSupport
A couple of weeks ago I installed quite a few of the
patches in the recommended list.
Since then, I get the following message repeated
continually in the console window:
DPMSSet: Invalid argument
Power management problems
I'm runnig solaris 8 on a ultra 5. I looked in the
power.config file and in the startup scripts, but
couldn't find any reference to "DPMSSet." Any ideas on
the cause and solution of the message?
I never use the powerd daemon, so killing the process
seems to eliminate the messages.
Thanks,
Gerhard Kuhn
[email protected]

ERROR WHILE OPENING SAP CONSOLE MANAGER

Hello Experts,
i am unable to login to SAP console manager, i see errors in event viewer
could you please guide me how can i remove this errors from event viewer.
when i am opening the windows, i get a pop up message saying, one or move events not closed properly....
IN system log under SAP console i see event viewer errors created...
please help, so that i can start my SAP training at the earliest....
Best Regards.....

Hello
Investigate via the system and/or application logs. Restart the system (cold restart) hardware to clear shared memory.
Regards.

Consolas hyphen problem in PDFs

Here's the setup: FrameMaker 7.2, Windows XP, Acrobat Pro 8.1.3, although I think all versions are actually irrelevant to the issue.
I recently switched to Consolas font for my code listings. But when Acrobat/Distiller converts the FrameMaker file to PDF, the hyphens end up with the wrong encoding.
It's definitely an Acrobat issue. When I copy-paste from my FrameMaker source file to a text file, the consolas hyphen correctly shows as unicode 2D (decimal 45, the "hyphen minus" character). But copy-pasting from the PDF ends up with the unicode 2010 character (the "hyphen" instead of the "hyphen minus" char). And while they "look" the same, engineering readers need to be able to copy-paste from the PDF.
So, is there a patch or a way to tell Distiller to map this character as needed?
TIA,
-Monique

Please delete me from your mailing list. Tks.
Date: Wed, 10 Feb 2010 10:54:49 -0700
From: [email protected]
To: [email protected]
Subject: Re: Consolas hyphen problem in PDFs
Exactly how are you converting to PDF. You say Acrobat/Distiller, but what are the steps you are taking. There are too many options not to isolate your process first. Are you printing to the Adobe PDF printer, exporting, or something else?
>

Lightroom (ACR 4) color management problems

Lightroom (or ACR 4) has some color management problems. When I develop a DNG into Photoshop (sRGB) everything looks great. Then I proof colors for the web (monitor RGB) the reds become oversaturated. I don't see this problem when I develop the same DNG using Bridge (ACR 3).
Any picture that I develop using LR that looks great in Photoshop, becomes way too red when published on the web.
Whats going on here?

I have confirmed this finding using Photoshop CS3 beta - same problem in converting to the web - too red!

Flash Builder 4 Beta 2 ---- Data Management Problem

Flash Builder 4 Beta 2 ---- Data Management Problem
I have a simple datagrid, a PHP service and a MySQL database. When I run the code I get multiple(7) records returned to the datagrid. Once I enable Data Management and run the exact same code, I only get 1 record returned.
Is there a setting in Data Management that affects the number of records returned?
Here is the MXML code I am testing.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                     xmlns:s="library://ns.adobe.com/flex/spark"
                     xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" xmlns:carasgndataphp="services.carasgndataphp.*">
      <fx:Script>
            <![CDATA[
                  import mx.controls.Alert;
                  import mx.events.FlexEvent;
                  var inptdata:String = "1";
                  protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                        getAsgnDataResult.token = carAsgnDataPHP.getAsgnData(inptdata);
            ]]>
      </fx:Script>
      <fx:Declarations>
            <s:CallResponder id="getAsgnDataResult"/>
            <carasgndataphp:CarAsgnDataPHP id="carAsgnDataPHP" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
            
      </fx:Declarations>
      <mx:DataGrid x="115" y="91" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAsgnDataResult.lastResult}" width="558" height="298">
            <mx:columns>
                  <mx:DataGridColumn headerText="A" dataField="numAsgn"/>
                  <mx:DataGridColumn headerText="T" dataField="numTopic"/>
                  <mx:DataGridColumn headerText="U" dataField="numUnit"/>
                  <mx:DataGridColumn headerText="P" dataField="numProblem"/>
                  <mx:DataGridColumn headerText="TP" dataField="PType"/>
                  <mx:DataGridColumn headerText="P" dataField="numSeqPresent"/>
                  <mx:DataGridColumn headerText="F" dataField="numSeqFeedback"/>
                  <mx:DataGridColumn headerText="D" dataField="numDelay"/>
                  <mx:DataGridColumn headerText="ID" dataField="idAsgnData"/>
                  <mx:DataGridColumn headerText="IDP" dataField="idProblem"/>
            </mx:columns>
      </mx:DataGrid>
</s:Application>

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Ora Apps Concurrent Manager problem

Here Ora Apps 11i running on a NT server. For some reason Concurrent Manager Service ORAConcMgr terminated and it is
not starting up even if i rebooted the machine. Now unable to get any reports etc. from the system. The error thrown while
starting the service is :
Could not start the ORAConcMgr Service
Error 1058 : The service cannot be started , either be it is disabled or it has no enabled service.
Can anyone tell anything useful about it.
Thanks.

Hi Regarding the concurrent manager problem.
Could you please try to be specific on your error like 1st of all are you able to start the concurrent manager?
If so what is the status?
If not what is the status can you let me know the status so that i work out some thing to solve the problem.
Thanks and Regards
Riyas
email:[email protected]

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Tutorial for solving some media manager problems

Hey gang,
Hopefully me posting this isn't bad forum etiquette, but I recently published a tutorial that details some fixes and "best practices" for properly importing media and getting rid of some pesky media manager errors:
http://library.creativecow.net/lyon_matt/fixing-fcp-assets/1
Full disclosure: I get something like a $0.01 per page view, but I'm not expecting to get rich. I just wanted to spread the word because I know lots of people experience Media Manager problems.
Feedback is definitely welcome!
Matt Lyon
Editor
Toronto

I think it's just a great article and is of more value than 1 cent I just offered by reading the article...
Rienk

Console Extension Problem

It seems like exception occurs due to WLS console extension problem. I
captured the errors and attaching it here.
The application is working fine on WLS 8.1, the exception occurs only when i deploy
the application on WLS 7.0. The application components are extending administration
console and displaying there. During this time, it is trying to invoke servlet(ServletStupImpl)
and failing over there.
Please check the attached file and reply me ASAP.
Regards
Senthil
[Console Extension error.txt]

What is the the platform the server is running on, and what browser you are using when the problem occurs?
Are there any exceptions in the Java console for the applet?

Print Color Management Problem ?

I have a print color management problem I cannot solve. It reminds me of the print color management problem I had over a year ago when the compatibility conflict between LR and MAC Leopard produced horrible prints. I have Snow Leopard now and been out of the country for some months and yesterday when I tried to make some prints the same problem reemerged. So I downloaded current drivers (and ICCsfor Premium Luster) from Epson and LR 2.6 and spent a good part of the day with Martin Evening's book. I followed (I think) his instructions to make the basic print step by step but the prints still were terrible. My problem is with the color management pop up in the print settings dialog -- it says "color matching" not color management and I cannot check either "no color management " if I want LR to control the process (Kelby) or check "color sync" if I want my Epson R800 take over. I have no idea where the "color management" pop up went. I'm clueless as usual and probably omitting a step because of frustration or brain numbness. Any help would be appreciated. WJS

The settings in Lightroom are simple. and contain in the Print Job panel in the Print module. You either select manage in printer (and then select the profile in the printer drivers) or select the profile here and then turn of all colour management in the printer drivers. The second option will usually produce the best results. What you don't want is to have the profile selected in both LR and the printer drivers, so if the driver doesn't have an option to turn of colour management then you may be forced down the first route. However it would be an unusual decision for a printer manufacturer to make drivers that can't turn off colour management, so you may wish to ask how to do it to your printer manufacturer or check the printers handbook.

Sb x-fi xtreme audio console launcher problems on windows 7 32bit

Asb x-fi xtreme audio console launcher problems on windows 7 32bit'sI recently installed windows 7, because I was tired from Windows XP, but unfortunately after installing all the drivers for my hardware I realized my 5. isn't working quite as expected.
My first problem was, that the Crystalizer didn't work, after installing tons of different software, found on creative labs forums the crystalizer started working.
Then I realized that the CMSS-3D wasn't (and still isn't working). How do I fix that ? I've tried numerous ways but nothing happens, while in windows XP everything worked fine after installing the drivers.
I also miss some configuration options in the Creative Console Launcher, namely the check boxes:
?"Automatically enable headphone settings" and "Automatically mute speakers".
Where the hell did they go?! I use them, I need them. How do I get them back? Is XP somehow privileged than 7? Isn't it supposed to be the opposite?
I also can't change the speaker configuration - it's stays 5. whatever I do, and the drop-down menu with the choices is missing?! Auto-detect option doesn't work, and if it did worked - I don't need it.

To : woj2322, You may need to download and install the Dell Notebook System Software version 5.0.5. This installs patch fixes to solve the PCI ExpressCard device not work correctly. This is only for the DELL Inspiron 520 Notebook (See Below). Microsoft patch fix info below also. Also, I see there's other people that are having the same issue, maybe you to need to download and install the patch fix for your notebook's on dell's website. It's called "Dell Notebook System Software" under "System Utilities"
DELL Inspiron 520 Notebook Release Title:System Utilities: Dell Notebook System Software, Utility, Windows Vista 32-bit, Multi Language, Multi System, v.5.0.5, A00 Description:Notebook System Software is a utility that provides critical updates and patches for your operating system.More info on the download file :
http://support.dell.com/support/down...=7&fileid=9736 Direct Download :
http://ftp.us.dell.com/utility/R43625.EXE Part of what it fixes from micrsoft.When you connect a PCI ExpressCard device to a portable Windows Vista-based computer, the device may not work correctlyhttp://support.microsoft.com/ kbid=929550

Console management problem

Similar Messages

Maybe you are looking for