Console message - Domain name not set

Opened console and get "Domain Name not set" message every 10 seconds or so - the anther from .ypbind.
What do I shut off, set or fix?
Thanks.
Tom

I found that deleting the file /etc/domainname fixed the problem. Apparently this file is a leftover from a previous version of OS X.
If you search the Leopard discussions for "ypbind" you will find other solutions, such as disabling ypbind in /System/Library/LaunchDaemons/com.apple.nis.ypbind.
Bill

Similar Messages

How to fix NIS domain name not set after upgrade

I finally updated after thousands of years. As pacman was spewing, I noticed that it moved /etc/conf.d/nisdomainname to .pacsave. Uh, whatever, says I. Must be a package issue. So I just reboot...and of course ypbind can't connect to anything because nisdomainname isn't set.
Just cd to /etc/conf.d and mv nisdomainname.pacsave nisdomainname
Then it will work again.

start here with the knowledge base + FAQ plus forum.
https://communities.vmware.com/community/vmtn/fusion

Postfix relay=none, ... status=deferred (Host or domain name not found...

Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
Elle

Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

Getting "Message callback is not set." error in Windows application log. Cause?

I am running a very low volume (3-4 simulaneous users) video chat application on FMS version 4 and am seeing the following error generated from FMS (Core) about once or twice a week.
Message callback is not set.
Any idea what the cause of this might be and whether or not it is impacting anything?
Additional information from the event log is as follows....
Log Name: Application
Source: FMS (Core)
Date: 1/12/2012 9:07:28 AM
Event ID: 1531
Task Category: (263)
Level: Error
Keywords: Classic
User: N/A
Computer: TACVID01.cyracom.com
Description:
Message callback is not set.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="FMS (Core)" />
 <EventID Qualifiers="49152">1531</EventID>
 <Level>2</Level>
 <Task>263</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2012-01-12T16:07:28.000000000Z" />
 <EventRecordID>104668</EventRecordID>
 <Channel>Application</Channel>
 <Computer>TACVID01.cyracom.com</Computer>
 <Security />
</System>
<EventData>
 <Data>(Adaptor: _defaultRoot_, VHost: _defaultVHost_, IP: 209.94.129.251, App: VRIServer/_definst_, Protocol: rtmp, Client: 4702111234542092655, Handle: 2147745794) : 97 g 00 E8 0 BF BE 7F BA A8 0E | 0D | F F8 18 BB 87 A2 < n 01 15 Q ED + 98 AD AE Z 8E ( 06 97 F8 02 9E 14 F6 BD f F5 F3 A5 E2 B5 [ 15 ( 83 FB A0 ` BD ` h FF A5 D6 9C E7 85 = A5 B 3 k 9B U 8A e B4 o ^ 0D 3 F3 / T 18 p R 14 F2 E1 E8 D1 D2 AC E2 EE F9 " C6 K 8D 06 a O s BC D9 A7 00 P f 1B T 1E A5 = H z 8A = C0 ) EE s 9C 19 < ( F7 9 C0 14 C6 F1 1F FD 4 7F 0D FD B7 06 B \ B8 E M J C5 00 } U Q DD CA D3 DC # DC E5 R 95 D9 R 99 p 05 05 1E E7 06 @ 14 F0 A2 C9 03 # ! 93 C5 X AD C2 ] D1 E1 90 S DD 0F ; D3 A9 09 CB 99 E0 D5 E1 O F0 I $ 14 F 8F 06 % D8 ! 93 BC E FB A4 84 - = C1 _ K 8 H E0 0A 0C C4 16 E7 06 B 0F s 83 / B5 9D 15 n > % FC t 05 80 P 8F 84 $ B0 E0 d E1 F E7 0B DC / 0C 92 C6 g BA DD X EF 9E 14 F8 0A 1A D4 E4 L g C7 C2 11 z AA 0D 10 10 FB DD 0C 83 ' 88 F0 C9 C0 14 E0 C8 ( B7 8 F0 d F1 0B 8E 80 DA @ FB 01 8C 82 16 80 P 8F F0 0 EF C3 . 15 + + s a AF C3 % 81 84 FA , AE F7 14 CB 1A x S FD F6 AA E ` D3 01 AA e - FB d 2 R C8 13 - 87 E6 v 01 R A0 C9 W 85 E1 98 S FC B3 ` C1 02 R C5 02 E8 85 A2 A0 CE t 0C FC F F0 4 BF D0 C6 1A w D0 C9 E1 O i AA D5 DE 01 W * DF 97 q B 91 F2 E0 D1 A 00 AB + C3 ' 88 FF 0F % 1D CA A5 D1 K 06 F2 F8 0E 8F 9A d | C5 09 $ CF B1 D6 \ E1 0F 8E F1 $ " p S FD a DF % E1 , t l DA AA Z O N 85 = CE F3 M 0D & F4 \ \ 94 D3 C2 85 86 N F1 E7 85 . E7 8 2 x R EE A4 CE 00 A7 88 FD AA : V r O A8 03 AA 15 ~ P T C5 14 B7 F 94 DA B1 F0 90 0A 16 C6 " A9 E6 D4 8E 87 CA 92 AB A3 A0 C9 C1 O F7 T A9 9C S 8A S Q K 84 BB @ 1 V FB G E2 K ` j B E2 EA 91 ] B7 F4 1A H @ : A8 18 ( T % E0 D3 81 8 D8 8F s 9A ` t 94 D6 C3 C0 14 14 x e 8A $ AA D5 B5 9 15 02 9E AD 13 s BF 06 88 0A v F6 CC L D6 12 06 D C2 AD 9 13 82 9E E7 J 97 ` 0D 85 d EA BB H 9E ' E2 1 R v ] E8 x C C8 B4 ' 86 \ " b F3 02 80 C6 C8 , b 80 h 01 @ , * o p d F1 . E7 06 ] l 99 O DA | 0C Z L ( DC | K B8 F3 84 7F B0 A4 a 1A 8 - 8 19 05 8D CE < 16 F7 9 E2 BD C1 90 _ 0C 9E * CE 06 B 1F 0D J ` 2 00 A0 AF 99 p d F0 A7 BB 0E t 1C 03 M FC 19 < ) F3 BD H . 95 94 ` C2 FF 8 1A E0 / / D6 4 18 W B8 E9 87 0E 85 = : k 01 85 FD 7F 01 86 z 06 97 FA % L Z 0D 03 E4 1C 09 d C6 * BC " 10 86 a O A0 AE 82 DC ` 09 0C C6 E0 C3 01 1E X 1A H 0A x S E2 b E C8 E " 80 C9 E1 _ 83 88 1 s 9E 14 FC B6 04 @ r Q DF B9 F9 C8 F7 09 C3 ' 88 F9 A0 A7 1D } 8F B0 19 C3 D5 BE ^ C2 _ g FC D0 EF C0 D1 A 8 O BA N 9A p AB F3 C3 A4 FC # $ & 8D 9A 96 G AA = O 85 = CE o 00 C9 1B 8B 9A 6 F1 6 19 06 B < BD T S F4 D0 w @ A4 m E0 86 ? C6 05 0F < : 12 15 03 03 08 > 06 19 F5 X 17 % 80 A4 BE 03 8 02 8F 06 A O T ; 03 19 A9 DC E1 D8 F6 @ 9 $ M E3 { C2 00 C9 E1 O t F6 88 BD 1F q H 19 F4 AB ' 8D 9E F4 F2 9E B4 16 $ DD 0E C8 C ' 85 < 14 ? 06 06 10 B9 BF x F N = E8 B3 C8 8F 0E E7 1A E0 C0 D4 = ^ ) C4 v 0F 13 B8 E C6 F9 12 F6 8B 89 F7 85 E3 E2 ED 1D CB U D9 AC ( F9 M </Data>
</EventData>
</Event>

I also have this error, in AMS 5.0.3. If I look in the logs, in core.00.log for instance, I also have the following error:
Assert failed in .\core\FcRecordedStream.cpp line 2420
Freaks me out a little. I'm not sure what this error means. I've googled it and still no one talks about this one so I'm in the void right now. I get this error multiple times in the log file, every few seconds when it starts.

Technical details of permanent failure: DNS Error: Domain name not found

I have tried to test eprint and keep getting an error. DNS Error: Domain name not found
I can print thru my network fine, but I get this error with eprint. My eprint address ends in hpeprint.co
Is this correct?

Found the problem. The printer display shorten my eprint address and dropped the "m" from com. Now to enjot my HP eeprinter.

Setting REPLY_TO: to my domain name, not my email service

I have a persoalized domain name. I'd like my [email protected] address to be in the FROM field on email I send from my iPad/iPhone.
Right now it the email address from my mail server accout with my Internet Service Provider.
I don't see how to change this in iPhone/iPad Mail. Usually, a regular mail client give the option to change the REPLY_TO: string for this. Any body know how to do this?

I guess, you have resolved the issue on your end.
https://forums.adobe.com/thread/1550028
Thanks,
Sanjit

Console Message - YP server not responding, still trying

I am getting the following message in the CONSOLE MESSAGES app. It repeats every 10 seconds. The IP that is not responding is my old Windows PC that was connected to my router before I bought my iMac.
How can I stop the computer from trying to connect to this IP address?
20/11/08 10:54:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying

I found this response to the same situation on OSX
10.5 and I am wondering if this is safe to carry out.
Am I going to run into any problems if I do this?
{quote}A fix for the ypbind errors in system log
OS X 10.5 Leopard is showing these errors every ten seconds:
] com.apple.nis.ypbind[]: Domainname not set. Aborting.
] com.apple.launchd[1] (com.apple.nis.ypbind[]): Exited with exit code: 1
] rasalas-pro com.apple.launchd[] (com.apple.nis.ypbind): Throttling respawn: Will start in 10 seconds
I fixed it as follows:
Since ypbind is not used by OS X in 99.9% of installations, just turn it off.
Edit the ypbind start-up definition
sudo vi /System/Library/LaunchDaemons/com.apple.nis.ypbind.plist
and change
<true/>
to
<false/>
Then shutdown the service
sudo service com.apple.nis.ypbind stop
I'm expecting that the "false" will keep it from restarting on reboot, but not quite sure about that.
Also, for future reference
sudo service --list
will show all the 'services'...
{quote}

Domain Names Not Appearing In Drop Down of Data Cleansing Task

For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
Has anyone else run into this issue?
Thanks!!
A. M. Robinson

I have just found the same issue.
For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Enter in the iview PCD portal content :
iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM

Compensation Profile Page iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Hi NVR,
Please check http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/c5d98c226848ebae8e7c2ce106db67/frameset.htm for settings and http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/da81a2167345359f153fafcbc8aadf/frameset.htm and the like for the different section values. We do not use some of the infotypes, so there is no data. I am just down to a salary development error now. Working with SAP on message 191413. I wish you well.
Best Regards,
Mike

Error messages in KO88-"Not set valuation type"

It shows many messages-
"Sender：ORD MZ000610376 RME1100SC28C6T-400-LF not set valuation type for the material 1002-00176" when executing KO88.
I do not understand what this message means.Did anyone have been encounter this message before?

Hi,
what is the 5-digit error message number for the mentioned message ? For example "KOxxx" ?
Best regards,
Andreas

VM Creation - host name not set

Hi,
I'm creating vm using createVmTemplate api where i assign the hostname in NICConfig
But i see that the given hostname is not set in the vm.
Default hosname - "localhost.localdomain" is seen in the vm.
how to resolve this

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

File Name not set when creating new file in EP 6.0 SPS20

Hi,
We recently upgraded from EP6 SP15 to SP20. Now when I create a new file or folder in a KM folder, the name that I give for the resource is not taken into account. The display name of the newly created resource will be New Text or New HTML Document or New Folder, etc. Even if I open the Properties and change it there, it is not getting reflected. But if I select Rename from the Context menu and give a new name, it gets set. What could be the problem?
Thanks in advance
Regards
Ranjith

Hi,
It was an issue with the customized PropertiesControl class.
Regards
Ranjith

In messages contact name not showing, just number??

When I open messages it only shows the number of my contact not the name of the person. It appears it only does this for contacts that I have used iMessage with??

Exactly the same problem...

Nodemanager doesn't display the domain name

Hi
Iam new to wlst scripting and concepts of nodemanager. My aim is to start the server using nodemanager through wlst.
First i invoked the wlst.sh shell script
then i started the nodemanager by using startNodeManager command
Then i tried to connect to nodemanager through nmconnect
Now if i type the command nm() it displays the following
Currently connected to Node Manager to monitor the domain {0}.
It doesn't display my domain name , instead displays {0}. I guess because of the domain name not set properly , i am not able to view the status of the admin server. For this iam using the command nmserverstatus("AdminServer") , it displays the status as UNKNOWN.
Can you please let me know what is that iam missing.

To ask Apple to fix this, you need to repost it at
http://www.apple.com/feedback
If I remember right, display of such domains in the original script may depend on whether the domain officials have policies in place to safeguard against potential confusion between names that look the same in cyrillic and latin. But it could also be a simple oversight.
Each browser may be different: Do Firefox and Chrome behave the same?

Console message - Domain name not set

Similar Messages

Maybe you are looking for