Console not accessible

I shut down the server weblogic 6.1. And restarted it. It starts fine. But when I try to access the console from the browser, it shows the dialog to accept the user id and password but then says "page cannot be displayed" Any ideas what is going on?
Thanks!

If that is the only link or admin console as well then if anyone can confirm what rights difference a user get when he is member of MBAM helpdesk, MBAM Advanced Helpdesk and MBAM Administrator group.
Also if i can get any help with the self service portal redirection then that will be really helpful. i was also checking if this could be because of any kind of certificate issue as server name was renamed after SQL and IIS installation.

Similar Messages

SCCM 2012 Console not accessible - SMSAdminUI.log - Error Code : ProviderLoadFailure

Hello Team,
        The site server which was working fine is now not accessible, unable to connect the console "Configuration manager cannot connect to the site"
* It is a standalone Primary with provide installed on the same server
* Recently Upgraded to R2 CU4. Base OS is Win 2K8 R2 Ent, SQL server is 2012
* I am able to logon to the SQL server and access the SCCM database and execute a SQL query
* I did try to connect to the WMI on the SCCM server using : wbemtest and connect to the SMS_ProviderLocation ()
* Tried restarting the server , still not luck
Any assistance will be of great help.
Following is the snippet of the error in the SMSAdminUI.log.
=============================================================
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'XXX'";
ProviderName = "WinMgmt";
\r\n
==========================================================================
Following is the error that I see in the Event log of the server
Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath) at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr
Error Object: instance of __ExtendedStatus { Operation = "ExecQuery";
==========================================================================

When updating to CU4, did you have the required permissions to update the database? I have seen similar errors when this has not been the case.
Have a look in
C:\Windows\Temp\CM12-R2CU4-KB3026739-X64-ENU.log
and see if you have any errors like this:
The EXECUTE permission was denied on the object ‘fnIsPrimary’,database
‘CM_P01’, schema ”dbo"
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

MBAM console not accessible after new installation and self service re-direct to give foreign key issue

Hello Everyone,
i am novice to MBAM and i have gone thru the virtual lab and material and i am in process of implementing it for my Organization. i am having 2 issues :-
1) After installation, i am confused how to access the console or does there is no Admin console and it is just servername:portnumber\helpdesk only.
2) If i enter just servername:portnumber\ then it get redirected to selfservice portal which is not an issue. Issue is after accepting agreement and clicking continue i am getting below error :-
A required anti-forgery token was not supplied or was invalid.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Mvc.HttpAntiForgeryException: A required anti-forgery token was not supplied or was invalid.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpAntiForgeryException (0x80004005): A required anti-forgery token was not supplied or was invalid.]
System.Web.Mvc.ValidateAntiForgeryTokenAttribute.OnAuthorization(AuthorizationContext filterContext) +546706
System.Web.Mvc.ControllerActionInvoker.InvokeAuthorizationFilters(ControllerContext controllerContext, IList`1 filters, ActionDescriptor actionDescriptor) +128
System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +658100
System.Web.Mvc.Controller.ExecuteCore() +125
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +48
System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +21
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +15
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +85
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +51
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +454
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +263
I have checked and usersupportservice.svc is leading to the pade giving below page which i believe it is working OK or kindly correct me if i am thinking wrong :-
This is a Windows© Communication Foundation service.
Metadata publishing for this service is currently disabled.
only thing which i deviated from process was because of some condition i have to rename my MBAM server before installation however by before rename SQL and IIS was installed.
i will really appreciate any help in this regard.

If that is the only link or admin console as well then if anyone can confirm what rights difference a user get when he is member of MBAM helpdesk, MBAM Advanced Helpdesk and MBAM Administrator group.
Also if i can get any help with the self service portal redirection then that will be really helpful. i was also checking if this could be because of any kind of certificate issue as server name was renamed after SQL and IIS installation.

Identity Server administration console NOT ACCESSIBLE!

hello, I get the following error when I enter the
any comments are appreciated!
thanks
following URL:
http://FullyQualifiedHostName:port/amconsole
Root Cause
java.lang.VerifyError: (class: com/iplanet/services/comm/https/ApprovalCallback, method: approve signature: (Lorg/mozilla/jss/crypto/X509Certificate;Lorg/mozilla/jss/ssl/SSLCertificateApprovalCallback$ValidityStatus;)Z) Incompatible object argument for function call
     at com.iplanet.services.comm.https.HttpsClient.doConnect(HttpsClient.java:274)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
     at sun.net.www.http.HttpClient.(HttpClient.java:306)
     at sun.net.www.http.HttpClient.(HttpClient.java:254)
     at com.iplanet.services.comm.https.HttpsClient.(HttpsClient.java:191)
     at com.iplanet.services.comm.https.HttpsClient.New(HttpsClient.java:219)
     at com.iplanet.services.comm.https.HttpsURLConnection.connect(HttpsURLConnection.java:112)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:569)
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:113)
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:71)
     at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:335)
     at com.iplanet.services.naming.WebtopNaming.getNamingProfile(WebtopNaming.java:308)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:219)
     at com.iplanet.dpro.session.service.SessionService.(SessionService.java:1106)
     at com.iplanet.dpro.session.service.SessionService.getSessionService(SessionService.java:256)
     at com.sun.identity.authentication.service.AuthD.getSS(AuthD.java:593)
     at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:614)
     at com.sun.identity.authentication.service.AuthD.(AuthD.java:203)
     at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:368)
     at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:97)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:407)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)
whole error:
Sun ONE Application Server - HTTP Status 500 Error
The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
Type: Exception Report
Message: Internal Server Error
Exception
javax.servlet.ServletException: Servlet execution threw an exception
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:742)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)
Root Cause
java.lang.VerifyError: (class: com/iplanet/services/comm/https/ApprovalCallback, method: approve signature: (Lorg/mozilla/jss/crypto/X509Certificate;Lorg/mozilla/jss/ssl/SSLCertificateApprovalCallback$ValidityStatus;)Z) Incompatible object argument for function call
     at com.iplanet.services.comm.https.HttpsClient.doConnect(HttpsClient.java:274)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:402)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:618)
     at sun.net.www.http.HttpClient.(HttpClient.java:306)
     at sun.net.www.http.HttpClient.(HttpClient.java:254)
     at com.iplanet.services.comm.https.HttpsClient.(HttpsClient.java:191)
     at com.iplanet.services.comm.https.HttpsClient.New(HttpsClient.java:219)
     at com.iplanet.services.comm.https.HttpsURLConnection.connect(HttpsURLConnection.java:112)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:569)
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:113)
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:71)
     at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:335)
     at com.iplanet.services.naming.WebtopNaming.getNamingProfile(WebtopNaming.java:308)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:219)
     at com.iplanet.dpro.session.service.SessionService.(SessionService.java:1106)
     at com.iplanet.dpro.session.service.SessionService.getSessionService(SessionService.java:256)
     at com.sun.identity.authentication.service.AuthD.getSS(AuthD.java:593)
     at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:614)
     at com.sun.identity.authentication.service.AuthD.(AuthD.java:203)
     at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:368)
     at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:97)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:407)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)

Check out Thread: Running SSL on Identity Server by brkan dated August 2, 2004. It gives a solution to the problem that worked for me.

Admin console is not accessible even when the Admin server is running

Running Weblogic 10.3.2 on RHEL 5.x and EM -11.0.1.0
Found the following errors in the server logs
<May 26, 2010 1:59:35 PM PDT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'FMW Welcome Page Application [Version=11.1.0.0.0]'.
java.lang.IllegalArgumentException: URI is not hierarchical
at java.io.File.<init>(File.java:363)
at oracle.as.jmx.framework.util.MBeansXmlServletContextListenerSupport.getRelativePathsToMBeansXmlFiles(MBeansXmlServletContextListenerSupport.jav
There is a deployment problem with the welcome page.
Could not access the admin console.
Reinstalled everything but getting the same error
Thanks in Advance
Anurag

yes solved.......there was firewall enabled which was not allowing the https traffic to flow.
Firewall disabled and the admin console was accessible.
Thanks!!

Any changes on SCCM console not applied

Hello,
We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific collection
but no changes applied.
Plus on System status I didn't found any component monitor.
I notice that backup SQL maintenance task was stopped because Symantec net backup client was installed, after removing the client I could initiate SQL backup by starting the service.
Anyone receive such issue ?
I'm going to check SQL, because it's look like changes are not stored in database, maybe SQL logs are full or something like that, if any one have an idea please share it with me.
Thanks
Abduljalil Abolzahab

@Narcoticoo
Thanks Narcoticoo
Actually I found errors in smsdbmon.log files such as
Failed to connect to the SQL server, connection type: SMS ACCESS
A network-Related or instance-specific error had occurred while establish a connection to SQL server. Server is not found or not Accessible.... etc
SQL installed with the same server.
I checked services and found that SMS_EXCUTIVE was running under local account and status is "Stopping" I change the account to Site admin account then restart and everything is working fine.
Thanks again
Abduljalil Abolzahab

Canvio Basics 500GB - error message F:\ is not accessible

I have just bought this ext drive and have been happily transferring photos, suddenly this message appears:
'F:\ is not accessible. The file or directory is corrupted and unreadable'
What does this mean? Is it dead already?

Originally Posted by Jeffrey
I assume the F:// means the connected external HDD.
Are you able to access any data stored on the HDD?
Are you able to create a folder on the HDD?
Please check this!
Please also start the command prompt console (CMD) and type this:
f:
press enter
dir
press enter
Now you should get a list of data stored on the HDD.
Does it work?
Thanks so much for your help Jeffrey, I have just used the error check on the ext hard drive and that seems to have fixed it, but I will note your fix in case of future problems.

What in inkchecker and why is its launch path not accessible?

I've just started getting these error messages in my console every time I use the system print command. (It happens as soon as I click on print and the print dialog box appears - before I make any choices of print/preveiw, etc). It seems to just have started for no reason I can think of. I've been using 10.4.7 on my PPC G4 Mini, thinking of going to 10.9 but worried this might mess up my printing.
I have an HP2710 that has given me very little trouble (other than install over wireless network). I have one "printer" set up for the gimp printer drivers and one for the HP drivers.
I HAVE been able to print, but I'm concerned about the error messages.
2007-05-06 08:32:53.829 Safari[7192] InkChecker could not launch , launch path not accessible
2007-05-06 08:33:53.315 firefox-bin[7198] InkChecker could not launch , launch path not accessible
2007-05-06 08:34:20.130 firefox-bin[7198] InkChecker could not launch , launch path not accessible
2007-05-06 08:35:14.208 Microsoft Excel[7203] InkChecker could not launch , launch path not accessible
2007-05-06 08:45:08.616 TextEdit[7215] InkChecker could not launch , launch path not accessible
2007-05-06 08:46:34.159 Mail[5762] InkChecker could not launch , launch path not accessible
I can find no meaninful references to "inkchecker" anywhere - is it part of apple system software - could this be a corrupted file?
Thanks for any help, comments, suggestions, etc.

I have upgraded to 10.4.9 and this message has gone away. Wasn't able to figure out if it was coming from HP or gimp software.
I've done an "archive and install" which seems to have not carried over my printing setup (need the HP software for the All-in-One to be able to use the Scan, Fax, Memory Module), so I have the printer installed through Bonjour. Who knows -- Maybe it will start again when I get around to re-installing the HP AIO drivers?
I'm going to mark this as answered.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Database table 'e' is not accessible

Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible. Please ensure that this table exists and is accessible."
After a lot of research I understand the problem now. Weblogic is checking the cmp-fields at deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0". Some databases have no problem with such a select. My Solid database unfortunately does a full table scan on it. Having only some rows in the table b there is no problem at all, but I have more than 500.000 entries. :-(
My question: Is there a workaround? Can I somewhere specify the SQL - command for checking mapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.
Thanx in advance
Robert

Robert Jung wrote:
Hi all,
like many others in the web I'm having problems deploying CMP Beans on BEA. I'm using Weblogic 8.1 and
get the following error message:
"[EJB:011076]Unable to deploy the EJB 'B' because the database table 'b' is not accessible.Please ensure that this table exists and is accessible."
>
After a lot of research I understand the problem now. Weblogic is checking the cmp-fieldsat deployment time using something like "SELECT xx1, xx2, xxx3 FROM ttt1 WHERE 1 = 0".
Some databases have no problem with such a select. My Solid database unfortunately does
a full table scan on it. Having only some rows in the table b there is no problem at all,
but I have more than 500.000 entries. :-(
>
My question: Is there a workaround? Can I somewhere specify the SQL - command for checkingmapped cmp-fields? Or can I disable the check somehow?
I think it is a very annoying problem, many users out there have.Hi. All commercial quality DBMSes I know, are smart enough to evaluate constant search
criteria, and not to access all the rows if it's a-priori known that no rows will
qualify. I would ask 'Solid' for a fix.
However, you can generate our EJBs with the option of retaining the generated
JDBC code, which you could alter and recompile for your use. You might be able to
substitute some DatabaseMetaData call to getTableColumns() to get the same info...
Joe
Thanx in advance
Robert

The Secure Store Service application Secure Store Service Proxy is not accessible

I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.

Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

The selected remote nodes 'node3' are not accessible

Hello,
I removed node3 from 2 node RAC Cluster.
After this I have re-add this node to my RAC. I added without any problem to CRS but I have a problem with script addNode.sh (/u01/app/oracle/product/crs/oui/bin).
I have to separate homes for ORACLE_HOME and ASM_HOME, so I need to run this script twice for each ORACLE_HOME.
I run addNode.sh from one of the cluster nodes (node1), if I run:
export ORACLE_HOME=/u01/app/oracle/product/11.1.0/asm
cd $ORACLE_HOME/oui/bin
./addNode.sh -silent CLUSTER_NEW_NODES={node3} CLUSTER_NEW_PRIVATE_NODE_NAMES={node3-priv} CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}
I got the following error:
Performing tests to see whether nodes node2,node3 are available
............................................................SEVERE:The selected remote nodes 'node3' are not accessible.
... 100% Done.
I reviewed logs located in /u01/app/oraInventory/logs I found
Status of node 'node3':
null
The virtual host name 'node3-vip' for node 'node3' is already in use.
I checked crs_stat from $ORA_CRS_HOME, but all applications (ons, gsd, vip) and targets are ONLINE. I tried to run vipca -nodelist node1,node2,node3 and updated a configuration. I checked /etc/hosts, connection via SSH between all hosts belonging to RAC: node1, node1-vip, node1-priv etc. Everything looks like fine, so I have no idea what caused this problem.
Software which I used:
Linux: UNL 5.4 x86_64
11g Release 11.1.0.7.0 - 64bit, Oracle Clusterware
Thank you for your answer,
Best Regards,
Edited by: user4924714 on 2010-02-15 07:50

Hi,
Thanks for your reply.
I am running addNode.sh from node which already exist in the Rac Cluster. I tried on node1, node2 but the resulat are the same.
Best regards,

Console not accessible

Similar Messages

Maybe you are looking for