Console One Missing the Action Option
I have a new Netware 5.1 SP6 server installed with GW 6.5. Console
1.35
was installed on this server. I noticed that if I run ConsoleOne from
this server, I do not get the Action option so I cannot remote control
to
PCs. How can I install the remote console plug-in for COnsole One for
this server so that I do not have to open different copy of COnsole
One
for GW administration as well as remote control.
Thanks
Che
It worked!! Thanks for your tip.
Che
> Che,
>
> I'd copy the GW65 C1 down to your local drive. Much better
performance.
> The go to the C1 directory on the server where ZfD3.2 is installed
and
> execute c1update.exe.
> This should copy down the necessary snapins to your local drive.
>
> HTH
> Uwe
>
>
>
> --
> Novell Support Connection Volunteer SysOp
> Please don't send me support related e-mail unless I ask you to do
so.
Similar Messages
-
I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.
What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
Mylenium -
Need to disable one of the select-options in dynamic selection screen
Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
RaviHi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name. -
How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!
Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena -
new firefox is great. I usually have many windows open. in your earlier version, when ever I used to close it, it would ask for save and shut down as one of the three option,but in this new version it close all my window, how do i save my window tab?
See [[Firefox does not ask to save tabs and windows on exit]].
Does this work for you? -
Reference monitor seems to be missing the setup option
http://imageshack.us/f/11/referencemonitor.jpg/
My reference monitor seems to be missing the setup option also it is displaying in a format I do not understand.I'm based in th UK and working with PAL mini DV. I imported the footage in and then created the sequences using a clip, so the sequence settings should be correct and having checked them, it seems they are. Admittedly, I've never used this function before and this: http://library.creativecow.net/articles/devis_andrew/YC-Waveform-graph-Premiere-Pro/video- tutorial is my frame of reference. The problem I have is I cannot convert the scale he is working with (IRE) to what I'm working with (V).
-
I am missing the Software Option from my settings
I am missing the software option from my settings
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
DLU - file rights tab in Console One missing.
Zen3.2 Sp3
We are using Console One 1.3.3 in two separate networks on our campus.
In the main network, under the DLU policy properties, the "File rights" tab
is the third on the dropdown list. We use this to set the users' rights to
the Windows Temp directory in WinXP so that a batch file can write some
temporary files.
On the other hand, on the subsidiary network the "File Rights" tab is
absent.
Bothe networks have the same patch level.
Is this likely to be a snapin issue for C1 or has someone another
suggestion?
Geoff Taylor BSc Dip EdConsole One, being reasonably portable, I copied to the subsidiary network
the entire Console One folder. When run, the copied version popped up the
required third item on the DLU properties tab.
On close examination, the version of C1 on the main network was 1.3.6 whilst
the subsidiary had 1.3.3. I guess, either a snapin was missing or this
property was new for 1.3.6.
"craig wilson" <[email protected]> wrote in message
news:OFeFe.7256$[email protected]..
>I can't recall exactly which version of ZEN has this feature added, but I
>don't see it mentioned in the ZFD3.2 docs so it could be a cross between a
>number of different things.....
>
> http://www.novell.com/documentation/...a/a6l0533.html
>
> Have you considered calling CACLS.EXE to set the rights to the
> workstations.
> It would not be a per user setting like DLU, but you could grant it to the
> local "Users" group.
>
> "Geoff Taylor" <[email protected]> wrote in message
> news:6d6Fe.6659$[email protected]..
>> Zen3.2 Sp3
>>
>> We are using Console One 1.3.3 in two separate networks on our campus.
>> In the main network, under the DLU policy properties, the "File rights"
>> tab is the third on the dropdown list. We use this to set the users'
>> rights to the Windows Temp directory in WinXP so that a batch file can
>> write some temporary files.
>>
>> On the other hand, on the subsidiary network the "File Rights" tab is
>> absent.
>>
>> Bothe networks have the same patch level.
>> Is this likely to be a snapin issue for C1 or has someone another
>> suggestion?
>>
>> --
>> Geoff Taylor BSc Dip Ed
>>
>>
>
> -
Hi all,
I am new to Captivate. I have a client that loved a short
demo i did for them on their employee website. It was about 5
minutes and it was flawless. Now, when i had the vice-pres of Human
Resources do the full presentation, Captivate missed an enormous
amount of activity on the screen. He was not blazing around, just
mousing and clicking, and entering text in a normal fashion. Entire
chuncks, i.e. logging in, were missing. I went with "custom size"
recording, sized IE to their web pages and enabled "auto"
recording, etc. etc. Am i missing something here? I cannot ask my
client to sit down and do it again hoping that after the hour it's
there!
TIA,
-peterHi again Peter
I can imagine the frustration. I think once you fully
understand and come to terms with Captivate and its recording ways,
it will hopefully make more sense to you.
You said:
Yes, what i did was to download the demo of Captivate. I got a
guest logon to their employee website. I tried it for about 5
minutes, clicking around and filling in boxes. For five minutes it
worked perfectly.
By "worked perfectly", are you saying it seemed to be
recording? Or are you instead saying you recorded five minutes
worth of action, played it back and it seemed to do fine? Assuming
it's the latter, I'm simply guessing here that what you watched in
playback mode seemed acceptable and you had no actual understanding
of the source at that point? What I mean by that is that you hadn't
quite grasped the whole individual screen shot thing and what you
observed led you to conclude it was all full motion.
You then said:
I bought the program and took it to the clients site, installed
it on their computer and there is where i learned about the uphill
battle i had on my hands. Right now, i am trying to recreate his
movements around the website, using his narration as a guide. I
just don't understand why it worked for me using the demo and then
the first slide recorded when the money was on the line was
recorded at 51 seconds instead of the 3 seconds that was set in the
preferences???
Unfortunately, without actually seeing what you were doing it
is rather difficult to ascertain what may be happening. I suppose
it's entirely possible that you managed to start recording in Full
Motion mode with Captivate. Hmmm, as you say you have Camtasia,
this actually makes some sense. When you began recording, did you
press F9? And F10 to stop? If so, those are typically the
keystrokes that force Captivate to begin recording full motion
clips.
When you click Options > Recording Options... what do you
see at the bottom of the Recording Options tab? Is there a check
mark inside the check box labeled: Record actions in real time? If
so, this might explain why a single slide might be timed
substantially longer than others. And as for that "default' slide
time, I believe that only applies to slides you manually create.
For example, by clicking Insert > Blank slide...
Sorry. Sometimes it seems I end up causing more questions to
be raised than actually answering the questions that were posed.
But with a little patience and perseverance, I think we'll get
through it.
Cheers... Rick -
In Bridge CS6, the "Tools" tab is missing the "Photoshop" option to batch process image
Hello!
Does anyone know why in Bridge cs6 under the "Tools" tab, my "Photoshop" option is missing? That is how I have always batch processed images. In Bridge, I choose the images to process, go to the "Tools" tab, down to the "Photoshop" option then to "Image Processor" and process. Now when I go into my "Tools" tab it only has the options: Batch Rename, 4 kinds of Metadata related options and Cache. Can someone tell me why this has happened and how to fix it? Thank you!!!
EricHello Omke,
This problem lasted for two days. I tried many suggestions but nothing worked immediately. Suddenly I turned my computer on last night and it was fixed...inexplicably. Not sure what worked but something did. I appreciate you taking the time to offer advice.
Best,
Eric -
I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Nokia 2600 classic missing the ENHANCEMENTS option...
HI,
The ENHANCEMENTS option is missing under my SETTINGS.
Is that why I can't hear any sound thru the phone earpiece or the earphones?
I've tried several times to reset the RESTORE FACTORY SETTINGS AND RESTORE ALL under SETTINGS and the problem is still there.
There are no updated software on the nokia website yet.
Can anybody help me out?
Thanks,
StewartThe 2000-series phones are not usually included in Software Updater, because they are basic phones designed mainly for users who don't use PC Connectivity.
If you are hearing nothing through either the phone speaker of the headset, then it points to a fault rather than a setting, since connecting the headset should switch between the two sound outputs. You may have to get the phone checked by Nokia service.
Message Edited by mccbleue on 23-Jul-2008 09:33 AM -
Missing the "none" option in presets when adding user
SL Server, fully updated
When I go to add a user, I am missing the preset 'None" I have 6th grade, 7th grade, 8th grade and Faculty. Why would the None option be gone, I thought that was always there.
Thanks in advanceDid you follow the instructions on that page exactly when creating the account (the instructions won't work with existing accounts) ?
e.g. if currently signed into an account then you signed out of it, and you then found a free app and clicked on its free 'price' :
And then clicked on 'create Apple id' on the popup that you get :
When I tried those steps in response to another thread a few days ago I got the 'none' option on the payments screen -
Can one portlet listen to one of the action in second portlet ?
I have portlet A which listen to portlet B. Within portlet B there are several actions. But I really want is portlet A listen to ONLY ONE action in portlet B, Not all the actions in portlet B.
Is there a way I can do this in Weblogic8.1 SP3 ? If yes, can someone give out some information(details) about it?
Thanks a lot. Very appreciate your help.Read the docs on inter portlet communication. What you saying should be possible.
Kunal Mittal -
clicking the 'edit options button is in teh instructions for downloading adobe flash...firefox 3.6.10, windows XP desktop
Ignore those instructions. I find the easiest way to install Flash is to use the manual installers, for details see http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
Maybe you are looking for
-
Url is not valid and cannot be loaded on local pages
I receive an Alert! message when loading local pages from my computer. This is just a nag screen to me in that the page always loads, but I must click ok to remove the alert window. This only applies to my local pages on my own drive: file:///home/do
-
LMS 4.2.3 Performance management
Hi All, For device count 100(CWLMS-4.0-100-K9 ) how many interfaces or how many devices can be managed by the performance management(HUM). While creating the new poller with 2 devices(430 interfaces) added its showing an warning "number of devices fo
-
Insert Fixed Width data into SQL database.
I have a file sent from a client that I need to get into a SQL database. The file name is ELIG and it is in a flat file, fixed width format. I am just going round and round how to get the data into a database using SSMS. Because another user is going
-
Convert ABAP list output to PDF without spool
Hi All, We have used the FM 'CONVERT_ABAPSPOOLJOB_2_PDF' to convert the list output to PDF. It creates the spool number in SP01 and PDF is getting generated. But, in our SAP ECC 6.0 server all spools are redirected to printer by default and get print
-
Html5 page vertically distorts image in fx only fine in all other browsers!
john-law.net/projects/lbox/ is an example file. No distortions in mac safari, chrome or win7 explorer, chrome. I've tried everything I can think of - installed a fresh copy of fx 22, restarted in s mode, cleaned up with applejack then progressively c