Console OutOfMemory problem

With the 8.1 sp1 I get out of Memory errors when using the console over long
time (several hours) on Windows XP I monitor a 8.1 SP1VM running on a Linux
machine. I got the same problem in 8.0 (more frequent) but not in 8.1, but
now it look like it's back in SP1.
I start the console by using the console.exe program.
I am waiting for the GUI less monitor/alert functionlity which would be nice
to have.
Another issue that would be nice to be able to monitor is the number of
threads, and also to be able to have alert triggers on that like alert if no
of Threads are > # or < #.
Ove

Hello Ove,
Ok, now we have reproduced the Out of Memory error and opened a bug
report for it. It seems to happen more frequently on certain computers.
Running the Management Console with the console launcher is equivalent
to running with options -client and -Xms8m (min heap size 8Mb). It works
better if you run without these options so the workaround I would
suggest is to not use the launcher but start the console simply with:
java -jar ManagementConsole.jar
It might also be a good idea to set the max heap e.g. -Xmx256m.
Best regards,
/Helena
Helena Åberg Östlund wrote:
We haven't been able to repeat this problem (yet). I ran the Console
for 17 hours on JRockit 81sp1 with -Xmx256m on Win2000 without any
problems or significant memory increase.
How long did you run before getting Out of Memory? Did you get a crash
dump or did it continue running? Did you have persistence enabled (you
can check that in the Console's Preferences)? Did you have any special
options enabled like notification, exception counting or method
invocation count?
Thanks,
/Helena
Ove wrote:
With the 8.1 sp1 I get out of Memory errors when using the console
over long
time (several hours) on Windows XP I monitor a 8.1 SP1VM running on
a Linux
machine. I got the same problem in 8.0 (more frequent) but not in
8.1, but
now it look like it's back in SP1.
I start the console by using the console.exe program.
I am waiting for the GUI less monitor/alert functionlity which
would benice
to have.
Another issue that would be nice to be able to monitor is the
number of
threads, and also to be able to have alert triggers on that like alertif no
of Threads are > # or < #.
Ove

Similar Messages

Consolas hyphen problem in PDFs

Here's the setup: FrameMaker 7.2, Windows XP, Acrobat Pro 8.1.3, although I think all versions are actually irrelevant to the issue.
I recently switched to Consolas font for my code listings. But when Acrobat/Distiller converts the FrameMaker file to PDF, the hyphens end up with the wrong encoding.
It's definitely an Acrobat issue. When I copy-paste from my FrameMaker source file to a text file, the consolas hyphen correctly shows as unicode 2D (decimal 45, the "hyphen minus" character). But copy-pasting from the PDF ends up with the unicode 2010 character (the "hyphen" instead of the "hyphen minus" char). And while they "look" the same, engineering readers need to be able to copy-paste from the PDF.
So, is there a patch or a way to tell Distiller to map this character as needed?
TIA,
-Monique

Please delete me from your mailing list. Tks.
Date: Wed, 10 Feb 2010 10:54:49 -0700
From: [email protected]
To: [email protected]
Subject: Re: Consolas hyphen problem in PDFs
Exactly how are you converting to PDF. You say Acrobat/Distiller, but what are the steps you are taking. There are too many options not to isolate your process first. Are you printing to the Adobe PDF printer, exporting, or something else?
>

Console Extension Problem

It seems like exception occurs due to WLS console extension problem. I
captured the errors and attaching it here.
The application is working fine on WLS 8.1, the exception occurs only when i deploy
the application on WLS 7.0. The application components are extending administration
console and displaying there. During this time, it is trying to invoke servlet(ServletStupImpl)
and failing over there.
Please check the attached file and reply me ASAP.
Regards
Senthil
[Console Extension error.txt]

What is the the platform the server is running on, and what browser you are using when the problem occurs?
Are there any exceptions in the Java console for the applet?

Sb x-fi xtreme audio console launcher problems on windows 7 32bit

Asb x-fi xtreme audio console launcher problems on windows 7 32bit'sI recently installed windows 7, because I was tired from Windows XP, but unfortunately after installing all the drivers for my hardware I realized my 5. isn't working quite as expected.
My first problem was, that the Crystalizer didn't work, after installing tons of different software, found on creative labs forums the crystalizer started working.
Then I realized that the CMSS-3D wasn't (and still isn't working). How do I fix that ? I've tried numerous ways but nothing happens, while in windows XP everything worked fine after installing the drivers.
I also miss some configuration options in the Creative Console Launcher, namely the check boxes:
?"Automatically enable headphone settings" and "Automatically mute speakers".
Where the hell did they go?! I use them, I need them. How do I get them back? Is XP somehow privileged than 7? Isn't it supposed to be the opposite?
I also can't change the speaker configuration - it's stays 5. whatever I do, and the drop-down menu with the choices is missing?! Auto-detect option doesn't work, and if it did worked - I don't need it.

To : woj2322, You may need to download and install the Dell Notebook System Software version 5.0.5. This installs patch fixes to solve the PCI ExpressCard device not work correctly. This is only for the DELL Inspiron 520 Notebook (See Below). Microsoft patch fix info below also. Also, I see there's other people that are having the same issue, maybe you to need to download and install the patch fix for your notebook's on dell's website. It's called "Dell Notebook System Software" under "System Utilities"
DELL Inspiron 520 Notebook Release Title:System Utilities: Dell Notebook System Software, Utility, Windows Vista 32-bit, Multi Language, Multi System, v.5.0.5, A00 Description:Notebook System Software is a utility that provides critical updates and patches for your operating system.More info on the download file :
http://support.dell.com/support/down...=7&fileid=9736 Direct Download :
http://ftp.us.dell.com/utility/R43625.EXE Part of what it fixes from micrsoft.When you connect a PCI ExpressCard device to a portable Windows Vista-based computer, the device may not work correctlyhttp://support.microsoft.com/ kbid=929550

Admin Console browser problem

Hi,
This is a peculiar problem that I am facing. I am working with iPS3.0SP3 on solaris8. My installation went fine. But when I try to access Admin console(thru Netscape 4.7 or 4.75), I have the login screen displayed. But, after I provide User and Password and hit Submit button, the browser window vanishes. This has been happening with SP2 also. And my login to the portal desktop screen is successful. My browser window is available. The problem is only with the Admin Console.
Now when I tried to Login to the same portal server instance's Admin Console thru the local Web Browser on a different machine, its working fine. I mean, the windows doesnt close.
Any guess on what could be the problem.
Thanks & Regards.
shivaram.

Hi there Shivaram,
I have found a similar problem, when using iPS. If you have logged into the portal desktop and then wan't to log into the admin console, the admin console seems to fail when logging in. What I have found, is that after you logout of the desktop, and then go to the console login, it helps to just click the reload button in netscape, while on the admin console login screen. It seems that you need to clear the session cookie first, otherwise admin authentication fails. Alternatively you can start a seperate instance of Netscape from the command line, which then forces Netscape to create an alternative temporary store, and lock files. I'm not sure wheteher this will help, but this is what I have seend before.... comments welcome..

Solaris Management Console Server Problems

When I try to run Solaris Management Console, I get an error saying that the server is not running on port 898. I have followed the instructions on hte FAQ. I see no instances of smcboot running in the processes. When I run /etc/init.d/init.wbem start it returns to the prompt with no additional information. When I then run /etc/init.d/init.wbem status - it says the server is not running. Anyone have any ideas ... this is driving me nuts. I have gone so far as executing smcwbemserver by hand, and it returns "smcwbemserver [7]: /lib/functions: not found"
Does ANYONE have any ideas (faint sobbing sounds in the background...)

I've got the same problem on b63 aswell if I start wbem manually I get no error (infact I don't get anything) and the server just dies. Also had the same thing on a previous Solaris 10 beta and through trial and error found it to be /etc/resolv.conf misconfigured. Unfortunately I can't quite remember what I done to fix it , if I remember I'll post back.

SCCM console connection problem to SMS provider

I have installed sccm in the bolw deisgn for the lack of Cluster test environment. It is just to test SCCM HA.
SQL 2008 and SCCM 2012 Site server in two separate physical box(win 2008) and installed additional sms provider to another windows 2003 box. I am trying to connect the console installed on SQL box to new SMS provider(win 2003 box). It does
not connect. What could be the reason? Is it possible by technology at all or not? If it is, how could it be possible?
Thanks
Rafiqul

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Datasource does not appear on the console, intermittent problem

I am using Weblogic 9.2 MP3
I've created an Oracle DataSource and successfully targeted it to a Managed Server.
When I click on it in the console and navigate to the "Monitoring" tab, it would sometimes appear in the "Test DataSource" table and sometimes it would not. I am able to successfully click the Test button when it does appear in the table.
I do not have this issue with Weblogic 9.2 MP1.
Is this a known issue and is there a patch for it?
Thanks,
Sohel

hi, I have not this problem, but have read some forums with people having the same problem. It seems to be with people using PC and not mac. Are you using iTunes 9? If so, it seems to be a screen resolution problem, and some of the image is cut and not shown on the screen. Just adjust your screen resolution so the image is all on the screen and the photo tag (the last on the list!!!) will show up!
Hope this helps
xavier

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

Hello! console log problem with window server

Hello! I installed today moutain lion, it's all perfect but i have a question...i was checking the console log, and there are a lot of messages like that:
26/07/12 00:04:10,682 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:17,796 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:42,979 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
26/07/12 00:04:46,366 WindowServer[89]: CGXRegisterWindowWithSystemStatusBar: window c already registered
everytime i swap to a full-screen app, a new line of that appear..hmm..it's ok or there are some problems?
thanks in advance!

cool! 'cause if i go to the app by mission control, console is clean...if i swap with the gesture..there is the log! maybe it's a feature of mountain lion by the way, pratically there aren't problem, only the massive logging in console..

Root Cause Analysis (OS and DB - OS Command Console) Connection problem!

Dear Community,
i've got a problem with the Root Cause Analysis OS Command console!
Currently I try to read the System MemStat info from the console, without success!
I've got the following errors:
Error1:
Error to parse the data returns by 'SAPOSCol', cause :com.sap.smd.plugin.remoteos.exception.SAPOSColDataParserException: Unknown Error during the parsing of saposcol output; nested exception is:
java.lang.NullPointerException
Error2:
'SAPOSCol' Service not availbale, detail :com.sap.smd.plugin.remoteos.exception.SAPOScolNotAvailable: SAPOSCol not available (detail output: )
The saposcol service is running, when I look on the server, I've got the correct status:
server:<sid>adm> saposcol -s
Collector Versions :
running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
Shared Memory       : attached
Number of records   : 5758
Active Flag         : active (01)
Operating System    : Linux server 2.6.5-7.283-smp #1 SMP Wed Nov 29
Collector PID       : 9536 (00002540)
Collector           : running
Start time coll.    : Wed Apr 23 15:00:58 2008
Current Time        : Wed Apr 23 15:12:08 2008
Last write access   : Wed Apr 23 15:12:04 2008
Last Read Access   : Wed Apr 23 15:12:03 2008
Collection Interval : 10 sec (next delay).
Collection Interval : 10 sec (last ).
Status              : free
Collect Details     : required
Refresh             : required
Header Extention Structure
Number of x-header      Records : 1
Number of Communication Records : 60
Number of free Com.     Records : 60
Resulting offset to 1.data rec. : 61
Trace level             : 2
Collector in IDLE - mode ? : NO
become idle after 300 sec without read access.
Length of Idle Interval : 60 sec
Length of norm.Interval : 10 sec
The strange thing is, sometimes it works, sometimes not!
Any Ideas?
System: Solution Manager 4.0 SP Stack 13
Thanks and regards
Sascha

>   running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
>   dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
I suggest you upgrade your saposcol on the Linux box, it's more than a year old and it's possible, that the SMD client needs a newer version that provides the data you're requesting.
Markus

Console Connection problem

I am trying to connect from my Windows 7 machine through IE 8. I can create machines do almost everything I need to except connect to the console.
The error I get is below.
I am able to VNC into the machine that I have VM Manager installed on which is centos 5.0 and connect to the console just fine.
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:https://oraclemgr:4443/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class

Firefox won't help you I'm afraid - the problem is actually at the server end not the client.
What you actually need to do is install TightVNC on your Oracle VM Manager node.
You can get it from http://oss.oracle.com/oraclevm/manager/RPMS/
You will then have to close down your browser on your Windows 7 machine and reconnect to the Oracle VM Manager system and try the console again. It will moan briefly about the certificate but accept it and carry on - you should not get the Java error again.
I found this a great help because the cursor control on my Oracle VM Manager is nearly imposible because I am 5000 miles away from it and over an ILO connection, but with TightVNC on my laptop I can get the same GUI up with mouse control that is as good as local!
Let me know if this fixes yours too!

D:\oracle\product\10.2.0-Console access problem-please help urgent.

I have installed D:\oracle\product\10.2.0, each times i create a db on it the console work fine, but when I close my computer then restarts it I can get in to the console again.
some people said that one shouldn't be on net while installing it, so I wasn't on net.
Then I tried to start the service as windows service it can not start.
where can I look in the oracle config ? to deal with the problem ?
Thanks.

Is your computer configured with DHCP? If so, did you configure the loopback adapter?
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGCEAI
Logs are written to ORACLE_HOME/<machine_name>.<dbsid>/sysman/log

Administration Console Extension problem with 8.1.5 upgrade

I have a module of code that is an extension of the Administration Console. When I deploy the .ear file, I can see a yellow folder/node displayed in the Weblogic (8.1.3) console.
This has been working for a couple of years until we recently upgraded to Weblogic 8.1.5 server. Even though the server log says that .ear file has been deployed successfully, the yellow folder/node does not appear in the Weblogic console.
Any one know what may caused this problem?
Thank you!

From $ORACLE_HOME/bin enter the
following:
$ORACLE_HOME/bin/oerr ORA 01034 This will give you more info on your
problem.

Unable to read big files into string object & java.lang.OutOfMemory Problem

Hi All,
I have an application that uses applet and servlet communication. On the client side I am reading an large xml file of 12MB size (using JFileChooser) and converting the file to an string object using below code. But I am getting java.lang.OutOfMemory on the client side . But the same below code works fine for small xml files which are less than 4MB sizes:
BufferedReader in = new BufferedReader(new InputStreamReader(new FileInputStream(file),"UTF8"), 1024*12);
String s, s2 = new String();
while((s = in.readLine())!= null)
s2 += s + "\n";
I even tried the below code but still java.lang.OutOfMemory is coming:
while (true)
int i = in.read();
if (i == -1)
break;
sb.append(i);
Please let me know what am I doing wrong here ...

Hi,
I could avoid the java.lang.OutOfMemory error using below code. But using below code I could read small files of sizes less than 4MB
but with large files of 12 MB the below code just simply hangs and I am unable to print the string object namely 's'.
My purpose is to construct an String or StringBuffer object out the user uploaded xml file at the client side and pass that object to server for processing. So how can I construct such object avoid memory problem and increasing the performance of such operations.
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
String s = new String(b, 0, b.length);
in.close();
Thanks & Regards,
Sony.

Console OutOfMemory problem

Similar Messages

Maybe you are looking for