Console questions with WL 6

1) Why isn't Netscape 6 supported yet?
2) Is there a way to monitor active database connections so I can see
how many are in use at any one point in time?
3) There use to be a way to see all the Servlets deployed but I don't
see Servlets anywhere in the new console.
4) Is there a way to configure an ACL on the console so only certain IP
address ranges can get to it?
5) Can I secure portions of the console so I can give our operations
folks just the monitoring portion?
Thanks

On #3 below - this is only true if you use a WAR file but they do not
appear when they are deployed exploded - at least we don't see our Servlets.
I would think they should show up since we still have to configure the
XML files but they don't.
#1 - We use it all the time and the latest versions are very stable.
At least I have fewer problems then my co-workers who use IE. Will it
be available in a SP?
Kumar Allamraju wrote:
>
Tom Gerber wrote:
1) Why isn't Netscape 6 supported yet?
We feel netscape 6 is flaky and also we couldn't complete the certification
of this version when we release WLS 6.0
2) Is there a way to monitor active database connections so I can see
how many are in use at any one point in time?
Not currently. This is a known issue.
3) There use to be a way to see all the Servlets deployed but I don't
see Servlets anywhere in the new console.
Servlets are deployed as part of webapps. You should see the webapp's
deployed in console..
4) Is there a way to configure an ACL on the console so only certain IP
address ranges can get to it?
Not that i know of... Send an enhancement request to [email protected]
5) Can I secure portions of the console so I can give our operations
folks just the monitoring portion?
Answered in 4.
Thanks

Similar Messages

  • DPM 2012 R2 Console crashes with ID: 917 error when trying to modify a Tape only protection group

    When I attempt to Modify one particular protection group, the console crashes with this:
    This only happens to this particular Protection group that backs up to long term Tape protection.  I have tried the work around found in this article
    http://support.microsoft.com/kb/2905631 , but had no success. 

    Hi,
    It sounds like you have a DPMDB inconsistency that is not possible to troubleshoot in a forum setting. Either restore the DPMDB from before the problem occurred and run dpmsync -sync  or open a support case so it can be diagnosed and corrected. 
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Firefox freezes if I try to initiate a remote console session with the Netware 6.5 server I am connected to. I can force quit, re-initiate Firefox, re-authenticate and I'm able to successfully start a remote console session and acquire the server console.

    Firefox freezes if I try to initiate a remote console session with the Netware 6.5 server I am connected to. I can force quit, re-initiate Firefox, re-authenticate and I'm able to successfully start a remote console session and acquire the server console.

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • Silly console question.

    Hello All -
    I have several 210's up and running happily.
    I need to console into one which has gone down.
    Using a Cat5E patch cord, and the supplied db-9 to rj45 adapter that came with the server, the silver adapter...I believe it's part number 530-3600-xx?
    Connecting to the rj45 serial management port on the back of the server.
    Using Hyperterm, 9600 8N1, no flow control (tried hardware and software).
    I get 0 output to the console. Powering the server off and on, same problem.
    I've swapped laptops, cables, connectors.
    Any thoughts as to what the heck I'm missing?

    There is no such thing as silly console question ;o)
    Try to use your cable on another server ...
    Unfortunately the silvery thingies provided by Sun are sometimes DTE (Term) sometimes DCE(Modem). Don't ask
    In some occasions using a straight through Cat5 cable is enough to DTE - DCE thing straighten up (it 'swaps' pins 3 & 6 on the RJ45 by sendin 3 to 3 and 6 to 6 the Orand & Orange/White Pair)(see sunfan's post http://forum.java.sun.com/thread.jspa?threadID=5248128&tstart=0) if it does not work try a CrossOver cable in lieu of Straight through (3 to 6 on RJ45)
    If things are still not working, which can be the case if V210 needs more than Ground get a standard CISCO DB9 to RJ45 cable to connect to the Serial RJ45 at the back of the server.
    If there is nothing of the above working build your own cable, I did mine cutting a DB25 Null Modem cable right in the middle and splicing the wires back (matching colours) together and then cut one end off a Cat5 and slice with the previous Null Modem as follow (see table). One DB25 end would then be DTE and the other one DCE ... I haven't find a server that does not want to print out something ... unless the connector is oxidised (that happens too).
    DTE
    DB-9     DB-25 Signal Function Adapter RJ-45
    8 5 CTS Clear To Send Blue 1
    1 8 DCD Data Carrier Detect Orange 2
    2 3 RD Received Data Black 3
    5 7 SG Signal Ground Red 4
    5 7 SG Signal Ground Green 5
    3 2 TD Transmitted Data Yellow 6
    4 20 DTR Data Terminal Ready Brown 7
    7 4 RTS Request To Send White 8
    6 6 DSR Data Set Ready     -     -
    9 22 RI Ring Indicator     -     -
    The console may have been redirected to TTYB ... but at least you should see the ALOM logging.
    All the best
    Cheers
    B.
    Sorry the post does not show the table properly ... just tab it.
    Edited by: Fortever on Jan 3, 2008 10:42 AM

  • How do I reset my apple id security question with out a rescue email

    How do I reset my apple id security question with out a rescue email?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (101013)

  • Which is better approach to manage sharepoint online - PowerShell Script with CSOM or Console Application with CSOM?

    Which is better approach to manage sharepoint online - PowerShell Script with CSOM or Console Application with CSOM?
    change in sharepoint scripts not require compilation but anything else?

    Yes, PowerShell is great, since you can quick change your code without compilation.
    SP admin can write ps scripts without specific tools like Visual Studio.
    With powershell you can use cmdlets,
    which could remove a lot of code, for example restarting a service.
    [custom.development]

  • Basic questions with respect to ABAP WebDynpro Application

    Hi All,
    I have two basic questions with respect to an ABAP WebDynpro application :
    a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
    b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
    Thanks & Regards,
    Sushanth Hulkod

    Sushanth Hulkod wrote:
    > a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
    >
    > b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
    a) If an ABAP WebDynpro application has been developed, how could it be made available to the end user?
    Answer - By providing direct link of the WD application created in SE80, creating iView for webdynpro abap application in the portal environment and  NWBC environment
    b) Can an ABAP WebDynpro application be developed in ECC or is it only applicable for version 4.6c?
    Answer - Yes it can be developed in ECC. Webdynpro ABAP is introduced in NW 2004s (SAP NetWeaver 7.0 or ECC 6.0)
    Thanks,
    Chandra

  • I cannot purchase anything at the itunes store because I am being ask for my security questions, but I don't remember them. How do you change you security questions with out knowing them?

    I cannot purchase anything at the itunes store because I am being ask for my security questions, but I don't remember the answers. I tried going to appleied.apple.com but I won't allow me to change my security answerswithout answering the original questions. How do you change you security questions with out knowing them? I need help.

    Welcome to the Apple Community.
    Start here, and reset your security questions, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help or you don't have a rescue address, you might try contacting Apple through iTunes Store Support

  • How do you resets your apple I'd security question with out calling apple

    How do you resets your apple I'd security question with out calling apple

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • I keep getting error 586 in the console along with the following: 3/18/12 7:55:19 PM com.apple.launchd[1] (org.samba.smbd) Throttling respawn: Will start in 10 seconds  3/18/12 7:55:29 PM com.apple.launchd[1] (org.samba.smbd[1246]) Exited with exit code:

    I keep getting error 586 in the console along with the following:
    3/18/12 7:55:19 PM com.apple.launchd[1] (org.samba.smbd) Throttling respawn: Will start in 10 seconds  3/18/12 7:55:29 PM com.apple.launchd[1] (org.samba.smbd[1246]) Exited with exit code:
    The console shows thousands of these error messages and it's messed up many functions of my MacBook.
    I have VMFusion on my Mac because for work I need to use Windows.  Last night I tried installing Windows 7 but could not complete installation.  I got a message saying "can not locate driver".  Then I started getting the Error 586.
    Today I unistalled VMFusion hoping that would resolve the Error 586.  No such luck.
    Can anyone help me get rid of this constant error, plesase?

    I believe this has something to do with Mail. Are these frequently occurring errors? If so and you quit Mail do the errors cease?
    Google searching for "org.postfix.master" reveals quite a number of links that you might check for more information.

  • I need some more interview question with answer on modeling,reporting.

    i need some more interview question with answer on modeling,reporting.

    Hi,
    You may find tons of topic about interview question. Please try to search forums before opening a post next time.Take a look at the link below.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bwinterviewquestions&adv=true&adv_sdn_all_sdn_author_name=
    Regards,
    ®

  • It's reasonable to start Operations Manager Console always with /ClearCache option?

    In the last month, sometimes i've the problem, that the operations manager console can't find objects; shows some alerts as acitve alerts, but they're closed.
    It could be solved by using the ClearCache argument, when i starts the console.
    It's reasonable to start the console always with ClearCache option? --or i've have some handicaps, when i do so?
    Thank you,
    Kind regards
    Wolfgang Winter

    Hi,
    Here is a discussion about this topic, please also go through it:
    console /ClearCache
    http://social.technet.microsoft.com/Forums/en-US/400a1856-bc9e-4cd1-879d-76c56b8dee88/console-clearcache?forum=operationsmanagergeneral
    Regards,
    Yan Li
    Regards, Yan Li

  • HT201303 Have forgotten my apple I'd security questions with respective answers

    Have forgotten my apple I'd security questions with respective answers

    Forgotten security questions - https://discussions.apple.com/message/18402551
    More involved forgotten question issues - https://discussions.apple.com/thread/3961813
    Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

  • Trying to teach self Java-question with arrays

    I have a question with arrays. I have a simple inventory program that I am writing(very simple). I have declared and created my array. Is this the time I should build a new class outside of my main in order to hold my array? I am still trying to sort through classes and when to create them. My thought is that because it is a hierarchy I should have a new class. For example, Albums is at the top and then there are specific types of albums, like TributeAlbum, PremiereAlbum, etc. Do I need a class for each of these? When I create the class, do I use the same name as the array?
    More info, just in case: My original class is AlbumInventory. I have created an array to hold 25 TributeAlbums which has 4 instance variables.
    Question 2: Why can I not refer to an album variable like TributeAlbums[0].itemNumber?
    Thanks in advance for your input.
    Denise

    I have a question with arrays. Okay.
    I have a simple
    inventory program that I am writing(very simple). I
    have declared and created my array. Is this the time
    I should build a new class outside of my main in
    order to hold my array? In an OO language classes are usually a good idea.
    I am still trying to sort
    through classes and when to create them. My thought
    is that because it is a hierarchy I should have a new
    class.This sounds a bit confused. You should have a new class when it is appropriate to do so.
    For example, Albums is at the top and then
    there are specific types of albums, like
    TributeAlbum, PremiereAlbum, etc. Do I need a class
    for each of these? Not sure. Why is the type not an attribute of the Album class? This (attribute) seems at first glance to be the way to do it.
    When I create the class, do I use
    the same name as the array?
    ? I am going to say no but I'm not following what you are really asking here.
    More info, just in case: My original class is
    AlbumInventory. I have created an array to hold 25
    TributeAlbums which has 4 instance variables.
    Can you please post some of your actual formatted code? It would also be helpful to know what the attributes for an Album are as you have them.

  • HT1911 I am not answering the security question with the answer APL wants.  What do I do?

    I am not answering the security question with the answers APL wants.  What do I need to do to get past the security questions to reset my password?

    Welcome to Apple Support Communities
    Hold Power and Home buttons for 10 seconds until your iPad restarts, and you will be able to use it again. After doing this, open Settings > iCloud > Storage & Backup, and make a manual backup

Maybe you are looking for