Console screen size
Hello. I recenlty install .8 on my Dell Inspiron 5100 with ATI Radeon 7500 HS: 31.5-48.5 VR: 59-75
I got X configured correctly for it, though the console without x running is still cut off
around the edges...im not quite sure how to do the configurations...hopefully
someone can help?
Thanks
Which kernel are you using? The arch default one with plain vesafb? Beyond with vesafb-tng? A self compiled kernel wit radeonfb? Configuration is a bit different in these scenarios (radeonfb actually autodetects stuff). The relevant aspect is the resolution anyway.
Last edited by patroclo7 (2007-04-12 07:54:59)
Similar Messages
-
Hi folks,
Is anybody aware of a way to change the font and/or the screen size when working in console mode on an x86 system? By console mode, I'm referring to an environment without X/JDS/CDE.
Cheers,
TimI had a hard time understanding what you mean, but to clarify: you mean that the rendered image of the screen does not fit the physical screen in some way and is cropped at the bottom? is it fine in X?
maybe you should try using a framebuffer and use another resolution for console. try to add vga=791 or something (there's a handy table in /boot/grub/menu.lst) at the end of your kernel command line.
Last edited by lloeki (2008-05-07 19:10:20) -
Starting up in black console screen
My PB has just started booting up into a black screen. I get the grey Apple logo then the start-up progress bar - which seems a little quicker than usual - and then after a few moments of a blank blue screen, it goes to a black screen with the following text:
Darwin/BSD (localhost) (console)
login: Feb20 18:44:14 localhost mdsyncServer[190]: Could not create DiskArb session or approval session.
Feb 20 18:47:15 localhost mDNSReopsnser: mDNSPlatformSendUDP sendto failed to send packet on interfaceID 01808E00 lo0/4 to 224.0.0.251:5353 skt 9error -1 errno 65 (no route to host) 2219651482
This last section appears again after a few minutes...having tried again to do whatever it's trying to do.
I've tried to boot from the original OS disk but no joy. I've connected to my other PB in target disk mode and was able to see the HD. I then ran Disk Utility which showed up some errors:
Verifying volume “HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Overlapped extent allocation (file 58140 /Library/Image Capture/Devices/EPSON Scanner.app/Contents/Info.plist)
Overlapped extent allocation (file 566738 /Users/annabelbevan/Library/Caches/Safari/01/11/3035749139-2755198897.cache)
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
The volume HD needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “HD” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I repaired the disk, verified it again and it came back free of errors.
I then tried the Hardware Test disk. Having selected the Test button and the right hand arrow I was left with a screen with the OSX folder and the folder with question mark alternating merrily.
I then tried the safe mode start-up without the Hardware Test disk and, having selected the OSX icon, went through the start-up screen with progress bar to the blank blue screen...and then to the black console screen.
The text on the black screen is slightly different now:
Darwin/BSD (andrews-powerb) (console)
login:
I'm all out of options now as I have no idea what to do past this stage. What's my login etc.
Is this an OS problem or a HD problem? Any thoughts anyone?
Thank you in advance of your replies.
RegardsCheck out the information from Mike Coniff in this discussion topic for a possible solution. If you are unable to succeed then you will have to reinstall OS X. If the drive is OK you can do this using Archive and Install which does not erase the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size
I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
The games work fine in every other way, it is only this small screen size which is driving me nuts.
I hope that someone can help me with this!!Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
Secondly, if it is the newest one then why will it not install on my computer? -
IBook 14" to MacBook 13" screen size
I am moving from a 14" iBook to the 13" widescreen MacBook. How do the two compare? Does the widescreen make up for the smaller overall screen size. I don't want to downgrade on size, as the 14" iBook is barely large enough.
The computer is used for basic Word, Excel, Internet, email, but lots of screens open at the same time.
Will it be OK???
FBI made th exact same upgrade and initially shared your concerns, however I can say confidently that they were wholely un-founded. The higher resolution screen of the macbook provides more screen space in a smaller area than did the ibook. The biggest difference for me was the brightness though, soo much brighter than the ibook; I hardly ever turn it up past half way!
The other posters are correct about expose though, I find i an invaluable tool. I also make use of virtuedesktops:
http://virtuedesktops.info/
It works perfectly to give you more useable screen area. -
I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working
I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..
-
the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.
Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook -
Mirroring with apple tv screen size on projector issue
Hello, my name is Dave. I do praise and worship music at a small church.
I want to mirror my ipad on a projection TV. I have the ipad and apple tv but it's not using the entire projection screen. It only uses about 40% of the screen.
I also want to use portrait mode as landscape is to wide and won't display the entire song well.
Apple suggested keynotes but I understand that doesn't work in portrait mode. That is a biggie for me. I have notability but isthe problem the app or getting the right screen resolution ont he projector / apple tv or how can I fix this please?
Thanks,
DaveWell that's the issue my friend. I called apple and told them what I wanted to do. They told me to get those things. So ... I called abck and double checked. I asked a different person the same scenario. Same ereply. So yes I did order apple tv and airpolay. As stated it doesn't work. The image is WAY smaller than the screen and it's not scaleable at all.
I don't understand what the praying jab is about. Praying was never mentioned in the issue here was it?
Back to the issue: it's not that I didn't realize this technology isn't here I was told it was by two different techs. So when I called back to explain my problem I was bounced around apple to several departments to find the technology simply wasn't here yet as I was told. I was informed incorrectly. So appple let me return the products. The customer service person apologized and I certainly accepted.
So the issue has nothing to do with praying etc. it's simply that for some reason, using your ipad for a demo only nets you 40% of the screen size and scaling is not an option.
Wish I knew that before I placed the order as that was not how it was explained either time I called in.
Now, let's have some techs start working on this issue... else I'm about to start praying... ;-)
Dave -
How do I set the screen size of my site?
Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
Thanks to anyone that can help, can't find a tutorial anywhereIn the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.
-
How do i make this page adapt to all screen sizes???
if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Nicola Campbell Photography</title>
<style type="text/css">
#apDiv1 {
position:absolute;
width:1001px;
height:170px;
z-index:1;
left: 438px;
top: 221px;
#navbar {
height: 40px;
width: 900px;
margin-right: auto;
margin-left: auto;
border-top-style: none;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;
</style>
<script src="js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="js/jquery-1.7.2.min.js" type="text/javascript"></script>
<script src="js/jquery.flexslider-min.js" type="text/javascript"></script>
<script src="js/jquery.mousewheel.js" type="text/javascript"></script>
<script src="js/jquery.easing.1.3.js" type="text/javascript"></script>
<link href="css/style.css" rel="stylesheet" type="text/css" />
<link href="css/flexslider.css" rel="stylesheet" type="text/css" />
<script type="text/xml">
<!--
<oa:widgets>
<oa:widget wid="2827522" binding="#OAWidget" />
</oa:widgets>
-->
</script>
<style type="text/css">
#apDiv2 {
position:absolute;
width:901px;
height:49px;
z-index:2;
left: 487px;
top: 51px;
text-align: center;
color: #FF99FF;
font-size: 80px;
font-family: HaloHandletter;
#apDiv3 {
position:absolute;
width:409px;
height:56px;
z-index:3;
left: 768px;
top: 96px;
color: #999999;
font-family: "Adobe Garamond Pro";
font-size: 24px;
#apDiv2 div {
font-size: 100px;
font-family: HaloHandletter;
color: #999999;
#apDiv4 {
position:absolute;
width:901px;
height:449px;
z-index:4;
left: 451px;
top: 202px;
#apDiv5 {
position:absolute;
width:848px;
height:152px;
z-index:11;
left: 433px;
top: 201px;
#apDiv6 {
position:absolute;
width:200px;
height:115px;
z-index:5;
left: 1250px;
top: 138px;
#apDiv7 {
position: absolute;
width: 891px;
height: 42px;
z-index: 5;
left: 552px;
top: 174px;
#apDiv8 {
position:absolute;
width:48px;
height:50px;
z-index:6;
left: 102px;
top: 51px;
#apDiv9 {
position:absolute;
width:49px;
height:51px;
z-index:7;
left: 152px;
top: 51px;
#apDiv10 {
position:absolute;
width:49px;
height:49px;
z-index:8;
left: 202px;
top: 51px;
#apDiv11 {
position:absolute;
width:52px;
height:52px;
z-index:9;
left: 252px;
top: 51px;
</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<meta name="Description" content="Welcome to Nicola Campbell Photography. I am based in Lancashire and specialise in Wedding Photography." />
<meta name="viewport" content="width=device-width" />
<link href="untitled.css" rel="stylesheet" type="text/css" />
<!-- Phone -->
<link href="iphone.css" rel="stylesheet" type="text/css" media="only screen and (max-width:320px)" />
<!-- Tablet -->
<link href="ipad.css" rel="stylesheet" type="text/css" media="only screen and (min-width:321px) and (max-width:768px)" />
<!-- Desktop -->
<link href="desktop.css" rel="stylesheet" type="text/css" media="only screen and (min-width:769px)" />
<style type="text/css">
#apDiv12 {
position:absolute;
width:1013px;
height:648px;
z-index:1;
left: 321px;
top: 299px;
</style>
</head>
<body onload="MM_preloadImages('navbaroriginalroll_r1_c1.jpg','navbaroriginalroll_r1_c2.jpg','n avbaroriginalroll_r1_c5.jpg','navbaroriginalroll_r1_c6.jpg','navbaroriginalroll_r1_c7.jpg' ,'navbaroriginalroll_r1_c8.jpg','navbar_r1_c4.jpg')">
<div id="apDiv2">
<div align="center">nicola campbell</div>
</div>
<div id="apDiv3">P H O T O G R A P H Y</div>
<div id="apDiv7"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('navbar','','navbaroriginalroll_r1_c1.jpg',1)"><img src="navbaroriginal_r1_c1.jpg" alt="c1" name="navbar" width="111" height="40" border="0" id="navbar2" /></a><a href="Aboutme.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image13','','navbaroriginalroll_r1_c2.jpg',1)"><img src="navbaroriginal_r1_c2.jpg" name="Image13" width="111" height="40" border="0" id="Image13" /></a><a href="Gallery.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image21','','navbaroriginalroll_r1_c5.jpg',1)"><img src="navbaroriginal_r1_c5.jpg" alt="c5" name="Image21" width="111" height="40" border="0" id="Image21" /></a><a href="Blog.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image22','','navbaroriginalroll_r1_c6.jpg',1)"><img src="navbaroriginal_r1_c6.jpg" alt="c6" name="Image22" width="111" height="40" border="0" id="Image22" /></a><a href="ContactMe.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image23','','navbaroriginalroll_r1_c7.jpg',1)"><img src="navbaroriginal_r1_c7.jpg" alt="c7" name="Image23" width="111" height="40" border="0" id="Image23" /></a><a href="Clients.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image24','','navbaroriginalroll_r1_c8.jpg',1)"><img src="navbaroriginal_r1_c8.jpg" alt="c8" name="Image24" width="111" height="40" border="0" id="Image24" /></a><a href="Weddings.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image25','','navbar_r1_c4.jpg',1)"><img src="navbar_r1_c41.jpg" alt="" name="Image25" width="111" height="40" border="0" id="Image25" /></a></div>
<div id="apDiv5">
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 10, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script><!-- #main-container -->
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 0, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<div id="main-container">
<p> </p>
<div id="main" class="wrapper clearfix">
<!-- FlexSlider -->
<div id="container">
<div id="slider" class="flexslider">
<ul class="slides">
<li> <img src="hollie.jpg" width="500" height="600" /> </li>
<li> <img src="slider2.jpg" width="500" height="600" /> </li>
<li> <img src="slider3.jpg" width="500" height="600" /> </li>
<li> <img src="slider8.jpg" width="500" height="600" /> </li>
<li> <img src="slider4.jpg" width="500" height="600" /> </li>
<li> <img src="slider5.jpg" width="500" height="600" /> </li>
<li> <img src="slider6.jpg" width="500" height="600" /> </li>
<li> <img src="slider1.jpg" width="500" height="600" /> </li>
</ul>
</div>
<div id="carousel" class="flexslider" style="display:none;">
<ul class="slides">
<li> <img src="hollie.jpg" width="500" height="600" /> </li>
<li> <img src="slider2.jpg" width="500" height="600" /> </li>
<li> <img src="slider3.jpg" width="500" height="600" /> </li>
<li> <img src="slider8.jpg" width="500" height="600" /> </li>
<li> <img src="slider4.jpg" width="500" height="600" /> </li>
<li> <img src="slider5.jpg" width="500" height="600" /> </li>
<li> <img src="slider6.jpg" width="500" height="600" /> </li>
<li> <img src="slider1.jpg" width="500" height="600" /> </li>
</ul>
</div>
</div>
</div>
<!-- #main -->
</div>
<!-- #main-container -->
</div>
<!-- #main-container -->
<div id="apDiv8"><a href="https://www.facebook.com/nicola.shulmancampbell?fref=ts"><img src="Retro-Facebok-Rounded-128.png" width="48" height="48" /></a></div>
<div id="apDiv9"><img src="Retro-Flickr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv10"><img src="Retro-Tumblr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv11"><a href="https://twitter.com/nicola_shulman"><img src="Retro-Twitter-Rounded-128.png" width="48" height="48" /></a></div>
<script type="text/javascript">
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 10, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
</body>
</html>APDivs cannot be resized.
APDivs in primary layouts won't work in Responsive Web Design.
APDivs are a very poor layout method.
For this reason, Adobe removed APDivs from Dreamweaver CC.
Example of Fluid Grid Layout with floats & margins, no APDivs required.
http://alt-web.com/FluidGrid/Fluid2.html
Nancy O. -
How can I get my movie clip to resize according to screen size?
I have a movie clip (startMenu); inside it there are buttons, text, and graphics. This is a game I am making, and it will be played on different screen sizes of Android. This is the code I have so far:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT
startMenu.addEventListener(Event.RESIZE, resizeLayout);
function resizeLayout(e:Event):void
setPosition();
function setPosition():void
startMenu.x = (stage.stageWidth - startMenu.width) / 2;
startMenu.y = (stage.stageHeight - startMenu.height) /2;
When I run it on different phones using debugging, it locks on the left hand corner, but does stretch out to fit the whole screen. What should I do?try changing
stage.scaleMode = StageScaleMode.NO_SCALE;
to
stage.scaleMode = StageScaleMode.EXACT_FIT;
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/StageScal eMode.html -
How can I find out the screen size of the users moniter using the Acrobat SDK?
How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
GregoryCurrently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory -
since the update to ios 7.0.3 I cannot expand Youtube videos to screen size - instead, the features around the video dissappear and are replaced by white fields. With my ipad mini I do not have that problem.
Does anybody know advice?Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
Best practice for setting or detecting screen size?
Hi All,
Trying to determine a best practice for setting or detecting the screen size. For playbook and iOS, I can set them. But for Android, the number of devices is too large so I'd rather detect. My first choice is to use the stage.stageHeight and stage.stageWidth. This works fine if I set my stage properties with standard meta data:
[SWF(height="320", width="480", frameRate="64", backgroundColor="#010101")]
However, if I use the application descriptor file to set the stage dimentions (as suggested by Christian Cantrell here http://www.adobe.com/devnet/flash/articles/authoring_for_multiple_screen_sizes.html)
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<fullScreen>true</fullScreen>
</initialWindow>
Then the stage.stageHeight and stage.stageWidth are not the correct numbers when my main class is added to the stage. Sometime after the main class is added to the stage, then those numbers are fine. Is there an event I can wait for to know that the stage.stageHeight and stage.stageWidth are correct?
Thanks in advance!Hi Lee,
Thanks for the quick response! However, for some reason the heightPercent & widthPercent metadata tags are not working as expected for me.
I have a wrapper class that I target for compiling, WagErgApplePhone.as where I've got my metadata
[SWF(heightPercent="100%", widthPercent="100%", frameRate="64", backgroundColor="#010101")]
sets some stage properties
stage.quality=StageQuality.LOW;
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
and instantiates my main class
var main:Main = new Main();
addChild(main);
my main class constructor even waits for the stage
public function Main(){
if (stage) init();
else addEventListener(Event.ADDED_TO_STAGE, init);
in my init function, stage.stageHeight traces out as 375 (expecting 320).
i have a function which is called via a button press event by the user, and stage.stageHeight traces out correctly (320) there. that's what makes me think that if i wait long enough, i can get the correct stageHeight before init/drawing. but i'm not sure what event to listen for, or if there's another trick.
if i use Capabilities.screenResolutionX and Capabilities.screenResolutionY the correct values are provided for mobile, but these values are not useful for the desktop and web version of the app. if there's no other solution, i'll execute different code depending on platform.
again, for reference, my app descriptor:
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<content>bin-iOS/WagErgApplePhone.swf</content>
<title>WAG ERG</title>
<fullScreen>true</fullScreen>
<renderMode>cpu</renderMode>
</initialWindow>
looking forward to any other ideas to try out & thanks so much for your thoughts! if you want to really dig in, this is an opensource project at code.google.com/p/wag-erg/ -
Screen Size and Resolution on Remote Access Mavericks
Hi Forum,
Accessing my Mac Mini remotely and it has a new install of Mavericks. The Screen size and shape and resolution isn't right, but Screen options in System doesn't give me any options. Is this because, physically, no screen is attached? Do only screen sizes and options come up when a screen is attached?
it currently shows 1280x960 [i think - just turned off the mac to get back to work] or 'scaled to fit'. Neither is right for the MBP remote access,. It was fine before i upgraded.
any ideas?Hi xerhino, and a warm welcome to the forums!
Good work on your part!
Hope your doing OK with the Snow, Ice, and Winds!
Maybe you are looking for
-
Hello, I own a T420i and have been experiencing very slow load times on startup. The "ThinkPad" BIOS screen stays active for roughly 5-10min before continuing like normal. Once operational the computer works fine other then an occasional freeze up
-
My program only seems to print out the last card in my JFrame, even though I do have a "for" loop. I really do not get why it doesn't print the others. public class Image extends Component { BufferedImage[] img = new BufferedImage[6]; public void pai
-
I have creative suite 5.5 ext. How would I put a video on a layer of a 3d object (3ds file) in after effects and then move around it with the camera? For example, I have a 3d model of a flat screen tv that i can import into photoshop and save as a ps
-
Cannot import RAW files since I upgraded to Yosemite
I used to import RAW files using iPhoto from my T3 Canon camera but since I upgraded to OS X Yosemite (10.10.1) and iPhoto 9.6 I cannot do this anymore. I have reinstalled the OS, applied all the RAW upgrades and even deleted and installed iPhoto aga
-
Hello All, I'm developing an application and I've written this bean containing [many] convenience methods. Now, over time, I've added more and more methods to this particular bean until the compiled class has risen to the approximate size of 80K. Whi