Console service won't start -help

I have create C:\oracle\product\10.1.0\
database, after the copmletion of the creattion the console was up running, but after i have close my computer I can't get hold on the console.
http://localhost:5500/em/console.
then I went to look at the windows service and find that the console service is not started, but when I stry to start it, i get the error that the service could not start and the error code is 2.
but all the other services are started.

When I try to start the dbconsole, it is giving the error as shown below.
D:\applns\oracle\product\10.1.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://C2048:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleorcl service is starting.
The OracleDBConsoleorcl service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\applns\oracle\product\10.1.0\db_1\BIN>net helpmsg 3534
The service did not report an error.
What could be the reason? Can somebody help me?

Similar Messages

Can't Update to 10.0.1, Bonjour Service Won't Start--PLEASE help!

All I want to do is update my iTunes but I cannot. It won't work from within iTunes, and when I try to do it manually it said "The Service Bonjour Service" won't start." In Services, I could not start it either, though I am admin.
So I deleted Bonjour (from within the Control Panel), thinking that'd take care of it, but it did not. I still get ALL the same messages. I even tried re-installing Bonjour (bonjour64.msi), and I get the same "won't start" message. It's not my firewall--I set that to always allow.
What is going on here? I've searched and searched, but to no avail (though they are plenty of Bonjour problems out there), and I really don't want to uninstall/reinstall iTunes, if that would even do it. I'm new to Apple, and this just makes no sense to me.
Please, help?? THANKS in advance~

There are remants of Bonjour in the program files, and I guess I could delete these to clean it up, but I doubt that would make the difference.
Actually, that could make a difference. If there is leftover componentry from the previous version still on the PC when the new version tries to install, the version mismatch could cause trouble with the new service starting. That could then roll back the attempted install.
There's a bunch of different stuff on 64-bit systems for BonJour (there's both 64-bit and 32-bit componentry stashed on a 64-bit system. We'll also try a cleaner version of an uninstall than the Apple instructions provide.
In Computer, open your C drive (or whichever drive your program files are installed on).
Open the "Program Files" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your program files are installed on).
Open the "Program Files (x86)" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Go back into the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Empty your recycle bin.
Restart the PC and try another BonJour install. Any better luck restarting the service this time?

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

Oracle Home Agent service won't start

OracleOraHome90Agent service won't start on Win XP Home Edition. Was working fine. Installed Sun Webserver 6.1 and started facing problems. So uninstalled webserver and even then the Oracle Home Agent service starts and stop immediately. the oracle database service and the listener starts without any issues. Any help appreciated.

XP Home Edition is not certified for Oracle9i Database but according to the information given by you, that service was functioning well. Perhaps the new software that you installed is consuming a lot of resources regarding the virtual memory of the machine and maybe for that the services is not starting.
I recommend you to increase the virtual memory of your machine and try again.
Joel Pèrez
http://otn.oracle.com/experts

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

DB Console service does not start

Hi, I have installed database 11.1.0.6.0 on W2K Professional and from the command line I have configured Database Control console using the sentence "emca -config dbcontrol db".
I have not created a repository.
Now I'm trying to start the service using "emctl start dbconsole" but I get the following error:
The service OracleDBConsoleorcl couldn't start
Service error: 2
You may get more help with the command NET HELPMSG 3547
I haven't find any clue in event logs or emca logs. Any suggestions?
Thanks and Regards.

Hi,
>>I have not created a repository.
Well, what did you expect? Why didn't you create the repository?
emca -config dbcontrol db -repos createCheers
Legatti

Agent service won't start on Windows server

Having bounced the Windows 2003 server (64 bit) the instance and listener started up automatically as set in the "services" but the Agent (which WAS running fine)would not start automatically so I tried to manuall start it in the services...a pop up message states it could not start service and to look in event log for details...
find this in event log:
The description for Event ID ( 4 ) in Source ( Oracleagent10gAgent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 03/13/08 13:52:14 agent exited with retCode 55..
find this in the agent.trc:
2008-03-13 10:49:45 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03135: connection lost contact
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03114: not connected to ORACLE
2008-03-13 10:49:46 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
2008-03-13 10:50:01 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:50:01 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
Any ideas? Is there something simple to do or should I try re-install the agent?

Man, I just love to ask questions then answer them myself:-)
The reason for all this was the recent change to daylight savings time here!
The agent (10.2.0.2) will keep running just fine until the server is bounced then it won't start until you apply patch (5884103)...thanks Mike at Metalink!

Oracle Lite service won't start

Hi,
I need help starting the oracle BPEL process manager.
I have installed the oracle BPEL process manager but it seems that it won't start because the Oracle Lite service cannot start.
When running C:\OraBPELPM\bin>olsv2040.exe /debug in a command prompt, I get the following error:
Debugging Oracle Lite Multiuser Service.
Service start failed, please check your environment
For more information enable service trace
Do you have any ideas how I can make the Oracle Lite service to work?
Presumably that will also make the Process Manager to start.
Thanks!

Hi again,
the port 1521 is free.
I have installed Oracle BPEL Process Manager 10.1.2 on Win2K (BEA WLS).
I also installed Oracle Lite as a Windows service.
When I try to start it as a service through a command prompt, I get the below error:
The Oracle Lite Multiuser Service service could not be started.
A service specific error occurred: 4294966385.
When I try to start it from the Windows Services system tool, I get the error:
Service specific error -911
I have also checked all ini files in the Windows directory and they look correct.
Any idea what could be the problem???
Cheers,
Akis

Weblogic Windows Service Won't Start

Hi there,
We have a server with Weblogic installed. After a restart one day the beasvc.exe service hung when the server came back up and now it won't start. Weblogic is currently running in Consol mode and runs without issue. Can you someone give me instructions on how to troubleshoot the Service start of beasvc.exe and what may have caused it please?
Kind Regards

Hi,
You can try to start your service using the debug option which should give you the error on the prompt if any, following is the command to start the service in a debug mode
WL_HOME\server\bin\beasvc.exe -debug "SVC_NAME"Where:
WL_HOME= Is the path where Weblogic server is installed say something like c:\bea\weblogic92
SVC_NAME = That's the name of the service. The best way is to right-click the service which you have created in the services.msc panel and select properties then copy the Display name of the script and then paste it in the "SVC_NAME".
Regards,
Ravish Mody

SQL Server Reporting Services won't start - SQL Server 2008 R2 SP1 on Windows 2008 SP2

All has been fine for some time, this server runs SQL and SSRS.
Recently reporting service says it starts, then stops. No changes of which I am aware.
This is in the application log:
Service cannot be started. System.Exception: Default appdomain failed to initialize.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start()
at Microsoft.ReportingServices.Library.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
I've tried changing the account to a domain admin, just to see - but it doesn't help.
Thoughts? Help?

Hi BlakeDuffey,
Generally, we may see the error messge "Default appdomain failed to initialize" in the application log when try to start Reporting Services if the RSreportserver.config file has been modified unexpectedly. At this time, I suggest that you back up your
current RSreportserver.config file, and then check the config file referring to the following article:
RSReportServer Configuration File
Note: The RSReportServer.config is located in the <drive>:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer folder.
If you cannot find the exceptions in the RSreportserver.config file, please post the config file so that we can help you to check it.
Meanwhile, please also check the Reporting Services Log file to see if there are any error messages related to the issue. If there are, please post the error messges as well. The Reporting Services Log file is located in the <drive>:\Program Files\Microsoft
SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles folder.
Hope this helps.
Regards,
Mike Yin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Mike Yin
TechNet Community Support

Crystal Ent 10 install fails with Error 1920 and services won't start

apologies if i'm posting to the wrong group. just let me know what the appropriate group is and i'll be happy to post there. i'm new to Crystal and this is my first installation of Ent so i'm completely lost, but here's my problem.
i'm trying to install Crystal Reports 10 and Enterprise 10 on a Windows Server 2003 SP1 server logged in as Local Admin and running the install locally (as opposed from a network location). i have IIS installed and .Net Framework 2.0 installed as per my software vendor's requirements.
the Reports 10 install goes fine, but when i near the end of the Enterprise 10 install, each of the services fails to start. the message for each is a pop-up that states Error 1920. Service 'Crystal Cache Server' (CasheServer) fiailed to start. Verify that you have sufficient privileges to start the system services. i clicked Retry on the 1st one (Crystal Cache Server) but it still fails to start. so i clicked Ignore on all of them so i can get past each one and check the Services window to see what account they are running under - it's Local System account as i'd expect. At the end of the install, i'm asked if i want to logon to the CMS and i chose No since i'm not familiar with Crystal at all but figured it's not going to work since the services wouldn't start.
i can't start them from the Services window or from the Crystal Configuration Manager - i get a message stating it failed to start in a timely fashion.
my co-worker and i noticed that after the install, and the MSDE install that CE does, there are the CE10.mdf and CE10.ldf files but it doesn't create 4 tables that expect to see when comparing this to our Test environment that our consultants set up. we think this is at the heart of it, but we simply don't know. can anyone help?

The appropriate group for this type of question is the Business Objects Enterprise Administration forums; I will move your post there today, in the future you can post to that forum.

Console service won't start -help

Similar Messages

Maybe you are looking for