Console=ttyS0 not working

I'm trying to install Arch0.7.1 using a slightly modified boot cd. All I did was edit the isolinux.cfg file to add "console=ttyS0" to the beginning of append line to try and get a serial port console. It doesn't work. The machine is booting from the disk (I temporarily hooked up a monitor) but I get absolutely nothing out the serial port.
I did the same thing on a Slackware cd and it worked fine. Slack is using a 2.4 kernel - this version of Arch is using a 2.6 kernel right? Is this the source of the trouble? I've looked at what I think is the kernel config file from the cvs repository and it seems like the correct options are selected:
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
This is the kernel parameter line I'm using:
label arch
kernel vmlinuz
append console=ttyS0 initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 root=/dev/ram0 BOOTMEDIA=cd
I've actually tried several different times, specifying baud rates and using different baud rates, but nothing seems to help.
Any ideas? (besides using a monitor :? )

I finally broke down and hooked up a monitor to do the reinstall. The 2.6.14 kernel has the serial console option enabled this time so once the install was done I was able to edit menu.lst and inittab and get serial access.
I hope that the serial console option is consistently set from now on.

Similar Messages

Console -f not working in ALOM

Hi,
I connected to ALOM on V240 installed with Solaris 10.
console -f does not give me console on screen.
Sun(tm) Advanced Lights Out Manager 1.6.8
sc> console -f
Enter #. to return to ALOM. ...I pressed ENTER a lot of times but does not give me console.
Another observation in this case is that I found server is connected to KVM and the console is working there currently.
output-device=screen
input-device=keyboard
for other server with same eeprom values, ALOM>console -f shows console login prompt. but KVM console is not working for this server.
Any ideas ?
Thanks

Set your input-device and output-device to 'ttya' to force the system console via the ALOM.
The default settings of screen/keyboard will still route the console to ALOM when there is not actually a screen and keyboard attached, but when they are attached, well, they become the console.
hth

Console port not working.

Hello!
I would like to know if there's some situation what a console port could be disabled, or something like that.
I'm trying to configure a Catalyst 2960 Series PoE-24 by the console port using the hyperterminal, but it's not working. I verified the cable and the COM port, and everything works with another switch (same model).
Does anyone knows what could possibly be happening?

My colleagues have focused on the usual issues that cause the console to not work - possible issues with the terminal emulator or more likely is mis match in the speed setting of the console. If you work through those possibilities and the console still does not work then I have another possibility to suggest. Perhaps someone configure the command no exec under line con 0. This would cause the console to not work. It would display messages during bootup but would not accept any commands.
Does the switch seem to boot up normally? Was it configured with an IP address that you could potentially telnet to? This would give you a way to investigate the configuration.
If my suggestion is correct and the issue is that no exec was configured then you should be able to use password recovery to bypass the existing config and this could restore normal operation for the switch.
HTH
Rick

Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.

Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.

OEM web console is not working from client side

Hi All,
I have 2 node RAC environment on windows 2003 server with 11g r1. My problem is on node a "oracle enterprise manager" "https://server-a:1158/em" is not working (node A). Is there any thing that I can do to solve this problem ?
On node B the url "https://server-b:1158/em" is working.
Any help would be appreciate.
Regards,
Edited by: 53637 on Feb 22, 2011 7:43 PM

It works as expected, dbconsole runs on only ONE node in the cluster, all agents from this and the other nodes report to this console, statement from documentation:
In 10.1.x.x, when a DB Control was deployed on a RAC cluster with n nodes, a dbconsole was started on each node of the cluster. Each agent on each node reported to each dbconsole management service on the same node.
Beginning 10.2.x.x, to improve performance and reduce the workload on the RAC database/instances,when a DB Control is first deployed on a RAC cluster with n nodes, a dbconsole is started only on the node from which the DB Control is deployed. Each agent on each node reports to that same unique dbconsole management service.
It is however possible to later reconfigure the DB Control to have more than one dbconsole started and to have agents reporting to several dbconsole.
*/

SAP NW702 SP6 - SAP console is not working

Dear Team,
I have installed SAP NW702 trail version in Windows Server 2008 R2, after a weeks i have encountered this issue. SAP MMC console is not started and still in idle status.
Please find the below error messages,
"SAP Basis System: Initialization           DB-Connect Failed, Return Code 008192"
Could you please help me to resolve this issue.
Thanks
S.Jeeva

Hi,
Please find the dev_w0 log details,
trc file: "dev_w0", trc level: 1, release: "720"
++*
+ ACTIVE TRACE LEVEL           1+*
+ ACTIVE TRACE COMPONENTS      all, MJ+*
++*
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile
DEV2K10\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_DEV2K10
M pid        2240
M
M
M Thu Jul 07 16:12:59 2011
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
*M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2240) [dpxxdisp.c   1314]*
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)          31696     (2264)
M DpShMCreate: sizeof(tm_adm)          5517056     (27448)
M DpShMCreate: sizeof(wp_ca_adm)          64000     (64)
M DpShMCreate: sizeof(appc_ca_adm)     64000     (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)          584080     (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)          156064     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)          268880     (80)
M DpShMCreate: sizeof(vmc_adm)          30128     (2152)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: sizeof(j2ee_adm)     3936
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000DE40050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE40060
M DpShMCreate: allocated wp_adm_list at 000000000DE43030
M DpShMCreate: allocated wp_adm at 000000000DE43220
M DpShMCreate: allocated tm_adm_list at 000000000DE4AE00
M DpShMCreate: allocated tm_adm at 000000000DE4AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E38DD60
M DpShMCreate: allocated appc_ca_adm at 000000000E39D770
M DpShMCreate: allocated comm_adm at 000000000E3AD180
M DpShMCreate: allocated slock_adm at 000000000E43BB20
M DpShMCreate: allocated file_adm at 000000000E461CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4A3730
M DpShMCreate: allocated vmc_adm at 000000000E4A37E0
M DpShMCreate: allocated gw_adm at 000000000E4AADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4AADE0
M DpShMCreate: allocated ca_info at 000000000E4ABD50
M DpShMCreate: allocated wall_adm at 000000000E4ABD70
M DpCommAttachTable: attached comm table (header=000000000E3AD180/ft=000000000E3AD190)
M DpSesCreateTable: attached session table at 00000000029C0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M
M Thu Jul 07 16:13:00 2011
M ThInit: initializing DIA work process W0
M
M Thu Jul 07 16:13:04 2011
M ThInit: running on host DEV2K10
M calling db_connect ...
B create_con (con_name=R/3)
*B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library*
[dbcon.c      5070]
*M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1461]*
M in_ThErrHandle: 1
M
M Thu Jul 07 16:13:05 2011
*M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   11087]*
M
M Info for wp 0
M
M    pid = 2240
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M
*M ******************************************************************************
*M **
*M * LOCATION    SAP-Server DEV2K10_NSP_00 on host DEV2K10 (wp 0)*
*M * ERROR       ThInit: db_connect*
*M **
*M * TIME        Thu Jul 07 16:13:05 2011*
*M * RELEASE     720*
*M * COMPONENT   Taskhandler*
*M * VERSION     1*
*M * RC          13*
*M * MODULE      thxxhead.c*
*M * LINE        11364*
*M * COUNTER     1*
*M **
*M ******************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
*M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   779]*
*M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 303]*
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
*M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2240) [dpnttool.c   339]*
Edited by: MOSSSAP on Jul 7, 2011 12:55 PM

6509 Console port not working

We have a 6509 running 5.4(2). We have set up a hyperterm session and connect to multiple devices, then we get to the 6509 and it will not work. When we reload the 6509 and we are consoled into it, we get data until it is finished reloading. Then the console connections is no longer there. Any help will be appreciated.

Erfrahim,
I have two supervisor in the chassis and the same problem. Console not work after format bootflash, reload IOS cat6000-sup2k8.7-6-7.bin and reeset in rommon mode. Pls help me
Hong Linh
Email: [email protected]

Admin Server Console is not working

Hi,
I have installed weblogic server 9.2 wirh SIP server on win2k the created domain successfully. With "Admin Server Console", I can not do anything because I get following errors;
It seems XML to HTML transform is not working? Any help is appreciated.
"The template you provided at /WEB-INF/templates/form.xml could not be processed"
"ERROR: 'Instruction unknown: loadinstruction'
FATAL ERROR: 'Could not compile stylesheet'

You are getting below exception when trying to start Weblogic Server or while accessing the Weblogic console URL?
- - Weblogic Consultant

Management Console is not working from Data Services Designer

Hi,
Management Console was working fine from DataServices Designer.
We have reconfigured Tomcat Weserver to a different port. The Management Console in the DataServices Designer is still pointing towards the old port and not working. Please advise how to change the port settings for the Management Console in the DataService Designer.
Thanks.
Raj.

from the Designer, click on tools menu, select Options
In the Options window, expand Designer node and select Environment
Select host:port for the Administrator under (Default Administrator for Metadata Reporting), it should list both old and new ManagementConsole port

Puppet Enterprise Web Console Credentials - Not working

Hi,
I have successfully created a new virtual machine and add the endpoint ports as suggested by the Puppet Lab instruction.
After provisioning, I am able to connect browser based puppet enterprise URL.
But even after following the given below steps using Putty (SSH) also my provided credentials are not working in the Puppet Enterprise browser login.(https://name.cloudapp.net)
Username:
sudo grep ‘auth_user_email’ /etc/puppetlabs/installer/answers.install
q_puppet_enterpriseconsole_auth_user_email=[email protected]
Password:
sudo grep ‘auth_password’ /etc/puppetlabs/installer/database_info.install
q_puppet_enterpriseconsole_auth_password=mypassword
Cheers, Senthilraj

Hi,
Did you mean that you could not SSH to the VM using Putty?
Based on my experience, you just need to check the endpoint public port for SSH, and then using "xxx.cloudapp.net" with that public port to connect to the VM. Then, you need to provide the user name and password. The username and password are
defined when creating the VM.
Did you upload an X509 certificate when creating the VM? If yes, you refer to the article below for reference:
How to Use SSH with Linux on Azure
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Remote Mgr Console java not working 64bit

Is anyone else having issues using the java based console screen in Remote Manager (I assume this what people call "NoRM"?) on a 64 bit Windows 7 machine?
We just upgraded our workstations, these are brand new Dell Precisions, and now I can't manage our Network 6.5 boxen.
In Firefox, it won't 't even open the console window: in IE9, it opens, and I can manage to type in maybe 1 to 3 characters, then it freezes up, rejecting any further input.
I'm using the latest Java, jre7up21. I'm using the 32 bit version as the browsers are, I believe, 32 bit. (well... Firefox is anyway). At java.com, both browsers past their test and show the latest version.
I wound up trying to install the 64bit version as well, then older version, and nothing worked, started uninstalling some older version, it got to where it broke the java plugin altogether, so I did a system restore from before all this nonsense, and if I go to java.com and run the test, it works successfully.
I'm about ready to throw out this machine and hook my old one back up.

Thought I'd update.. I found that disabling caching also breaks ConsoleOne, so not really a viable solution after all.
I had to have my machine re-imaged, ultimately, that fixed it.
Now, months later, the problem has suddenly returned, and is also affecting coworkers, so it's not just me; and when I attempt to open the console screen via NRM, it whines about security and needing an update and simply won't run (even if I click on activate).
But updating before had created the issue, far as I know.
Lose-lose. I guess I have nothing to lose by trying to update though, because I can't get in now as it is.
Thank God for the ability to SSH, at least.
I hate Java. Seriously. It's flaky, unstable, insecure, and slow. Why couldn't developers just write for Windows and Posix systems and leave it at that? The "one size fits all" philosophy results in something that fits no one very well, but the industry has invested so much into it that we're stuck with a krufty psuedo platform.

Breadcrumb navigation in console extension not working

Hi everyone,
I'm trying to get the breadcrumb navigation working in my console-extension for wls 9.2.
Currently it is displayed like this:
Home > com.bea.console.handles.JMXHandle%28%22No+context+provided+for+Loggers%22%29 ("Loggers" is the definitonLabel of my netuix:page element).
As described on [url http://e-docs.bea.com/wls/docs92/console_ext/addcontrols.html#wp1078025]page 6-15 of the "Extending the Admin Console" guide I added the <netuix:meta name="breadcrumb-context" content="handle" /> element exactly as in [url http://e-docs.bea.com/wls/docs92/console_ext/addcontrols.html#wp1078078]listing 6-7.
Do you have any idea what goes wrong here or any pointers what I might be missing?
Any help is greatly appreciated.
Btw. Is there a more appropriate place to post this question?

Chariot, unless someone decompiles that swf we cannot see
your code or how you constructed it. I did do that and took a look
but not everyone can do that. In the future, you can either post
the FLA or use the "Attach Code" button to show what you've done.
1.) first thing I noticed was that your HIT area on your
buttons is the text itself. If you make a rectangle on the HIT
frame only that is slightly larger than your text, you won't have
such jumpy behavior when mousing over or trying to find the "sweet
spot" that will actually click. You've made invisible buttons, I
see. It's the same concept. That way, you can get rid of the
invisible buttons altogether.
2.) Not sure why you have several layers on your buttons.
Looks like you have a layer per letter. They can all be on the same
layer. :)
3.) Try to put your button code on the main timeline instead
of on the buttons themselves. If you're curious why, read
this
article.
4.) You only need one arrow button... not a different one for
each section. Again, place the code on the main timeline and
specify at each keyframe what you want "leftArrow_btn" or
"rightArrow_btn" to do. I just made up those instance names but
they'll do whatever you tell them to do even if it's different than
what you told them to do before.
Other than that, I don't see what you are referring to.
There's a lot of cleaning up to be done. That will probably fix
some errors. I've posted an example of how it might work for you
here.

Autoscaling Application block for Azure worker role console app not working. Get error as The HTTP request was forbidden with client authentication

I have written a console application to test the WASABi(AutoScaling Application Block) for my worker role running in azure. The worker role processes the messages in the queue and I want to scale-up based on the queue length. I have configured and set the
constraints and reactive rules properly. I get the following error when I run this application.
[BEGIN DATA]{}
DateTime=2013-12-11T21:30:02.5731267Z
Autoscaling General Verbose: 1002 : Rule match.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","MatchingRules":[{"RuleName":"default","RuleDescription":"The default constraint rule","Targets":["AutoscalingWebRole","AutoscalingWorkerRole"]},{"RuleName":"ScaleUpOnHighWebRole","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnLowWebRole","RuleDescription":"Scale down the web role","Targets":[]},{"RuleName":"ScaleUpOnHighWorkerRole","RuleDescription":"Scale
up the worker role","Targets":[]},{"RuleName":"ScaleDownOnLowWorkerRole","RuleDescription":"Scale down the worker role","Targets":[]},{"RuleName":"ScaleUpOnQueueMessages","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnQueueMessages","RuleDescription":"Scale down the web role","Targets":[]}]}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling General Warning: 1004 : Undefined target.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","TargetName":"AutoscalingWebRole"}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Verbose: 3001 : The current deployment configuration for a hosted service is about to be checked to determine if a change is required (for role scaling or changes to settings).
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","HostedServiceDetails":{"Subscription":"psicloud","HostedService":"rmsazure","DeploymentSlot":"Staging"},"ScaleRequests":{"AutoscalingWorkerRole":{"Min":1,"Max":2,"AbsoluteDelta":0,"RelativeDelta":0,"MatchingRules":"default"}},"SettingChangeRequests":{}}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Error: 3010 : Microsoft.Practices.EnterpriseLibrary.WindowsAzure.Autoscaling.ServiceManagement.ServiceManagementClientException: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure'
in subscription id 'af1e96ad-43aa-4d05-b3f1-0c9d752e6cbb' and deployment slot 'Staging'. ---> System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException:
The remote server returned an error: (403) Forbidden.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
If anyone know why I am getting this anonymous access violation error. My webrole is secured site but worker role not.
I appreciate any help.
Thanks,
ravi

Hello,
>>: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure' in subscription id **************
Base on error message, I guess your azure service didn't get your certificate and other instances didn't have certificate to auto scale. Please check your upload the certificate on your portal management. Also, you could refer to same thread via link(
http://stackoverflow.com/questions/12843401/azure-autoscaling-block-cannot-find-certificate ).
Hope it helps.
Any question or result, please let me know.
Thanks
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Solaris Container Manager console does not work

I've loaded SMC 3.6 and loaded the container manager piece with no problems on a fresh Solaris 10 (11/06) install on a blade 1000. The managment center works just fine. I've loaded the container manager according to the following doc:
http://docs.sun.com/app/docs/doc/819-4098/6n699bc48?a=view
The install went fine but when I point my browser to the page specified in the doc above the browser wants to download a bin file. I've restarted the java web server as shown in the above doc and I've scanned the port 6789 with nmap to make sure it was open. All browsers I've tried want to download a bin file. They are not launching a console as shown in the doc.
I've tried firefox on linux, netscape on solaris and IE on windows. Java is loaded and working on all platforms. How do I get this working?

use secure http
https://<server name>:6789
make sure you ran the setup for Solaris Container Manager

OpenOffice Presenter Console Extension not working anymore

I have previously done presentations using OO impress, which worked reasonably well. Now after some time I have to do another (important!) one, using the new version 3.2.1., and it's a terrible experience. First I tried the normal openoffice-base, which immediately crashed when quitting the slideshow. I found a thread regarding this (see https://bbs.archlinux.org/viewtopic.php?id=98617 ) which recommended to switch to go-openoffice (still, I'm absolutely baffled as to how such a grave bug can exist in a stable release, but anyway...).
So I did switch to go-openoffice. It does not crash anymore, but then I had to witness that the Sun Presenter Console Extension is no longer working. This extension (which should be an integral part of openoffice anyway) is really important to me, since it shows me the next slide, notes and a timer on my laptop during the presentation. I re-installed openoffice-base, but it doesn't work there either, nor does it work with openoffice-base-devel (which was practically unusable anyway due to crashes, but I can understand that for a devel version).
Hence my question: Did anyone manage to get the Presenter Console Extension working, preferably with go-openoffice, version 3.2.1?

Argh... I didn't see that go-openoffice already ships with a new version of the presenter extension in /usr/lib/go-openoffice. After installing this one, it worked! It's strange though - this version shows the version number "1.1.0", whereas on the official page the latest version is still 1.0.3.? Ah well, who cares. I can finally work on my slides. :-) Sorry for the noise, I should have read the wiki page more carefully.

Console=ttyS0 not working

Similar Messages

Maybe you are looking for