Consolidate Target HFM not working

The consolidate target (HFM) process is not currently working. I have verified the integration settings are set correctly and set up validation entity groups.
Is there something i am missing to enable this event to occur?
thanks for any responses

Are all the following statements true?
1) Enable Consolidation Integration option has been checked.
2) The user has permission to run consolidations for the relevant entities in HFM
3) You have the Consolidate option checked against the entity in the Validation Groups

Similar Messages

Target="_blank" not working........plz help me..

My requirement is to open a new (child) window when the user pushes
a button on a (parent) window. I need to create a new instance
of a bean, populate it, and then pass it to the child window for
display.
i tried this way
To open JSP in new window just use target directive e.g.:
<form action=myjsp.jsp method=post target=_blank>
its not working...
One additional question if I may:
I don't want to open a new window for every action a user could
take on the screen. Sometimes, I just want to post to the
servlet and forward the jsp to the one window that is open.
If I put the TARGET directive in, wouldn't I always open a new
window?
Is this still the best way to do this given this additional
requirement? If yes, how do I alter it so that I don't always
go to a new window?
Thanks!!!!!!

Thanks for the response...
can i use some thing like this.....
i mean document.form.action in window.open
something like below...
sb.append("input type=\"submit\"
=\"submit\" Name="Submit"
onClick="window.open(document.MyForm.action='/phmuni/fo
m/combineDockets.jsp' , "myWindow");" value="Print " >
");YOu don't have to use action if you just want to go to another page. If you do need to do something before you open the new window, you may create a function (Javascript). Do some things (like the action) and then open a new window within that function. Then within your onClick tag, just call that function.

Target mode not working restating holding T

How do I restart in target disc mode with MAcbook pro , firewired to another mac, restarting holding the "T". It is not working, I have to go to system preferences > startup Disk > and do Target Disk mode.
Before I could just hold the "T " on restart and it would do it. How can I make that function work again?
THX _________

Make sure the FireWire cable is good, and check the connection.
Make sure no other FireWire devices are connected.
Make sure you are starting up the computer while pressing and holding down the T key.

GPP item-level targeting filter not working as expected

I am trying to set the Internet Explorer homepage via user Group Policy Preferences (GPP) registry setting for a very specific group of users. I am using item-level targeting to accomplish this but am having trouble getting the logic working as expected.
Here is my item-level targeting filter:
The user is a member of the security group CONTOSO\FireRescueDept
AND this collection is false
The user is a member of the security group CONTOSO\EmergencyManagementDept
OR the user is a member of the security group CONTOSO\PublicSafetyDivision
The user in question is a member of both CONTOSO\FireRescueDept and CONTOSO\EmergencyManagementDept. I believe this means that this particular registry GPP setting should NOT apply to the user in question and that is the outcome I desire.
Here is how I'm thinking about it:
The user is a member of CONTOSO\EmergencyManagementDept; therefore, "The user is a member of the security group CONTOSO\EmergencyManagementDept" evaluates to TRUE.
Since the other item in the collection is connected with the boolean OR operator, the collection evaluates to TRUE regardless of the evaluation of "The user is a member of the security group CONTOSO\PublicSafetyDivision."
The item-level targeting filter is looking for the collection to evaluate to FALSE. Since the collection has evaluated to TRUE, the evaluation "This collection is false" is FALSE.
Because of the AND operator in front of "This collection is false", both "The user is a member of the security group CONTOSO\FireRescueDept" and "This collection is false" must evaluate to TRUE in order for the item-level targeting
filter to determine that the user in question to apply the GPP setting the filter is attached to. However, since "This collection is false" has already evaluated to FALSE, the filter as a whole should evaluate to FALSE and this GPP setting
should not apply.
However, according to gpresult it does apply.
Please advise. I want this particular setting to apply to users in the CONTOSO\FireRescueDept group unless they are a member of CONTOSO\EmergencyManagementDept and/or CONTOSO\PublicSafetyDivision.

Am 21.05.2013 16:22, schrieb Scott W. Sander:
> Does item-level targeting not work with Universal security groups
> because the group policy client isn't able to determine that the user
> is a member of groups of that type?
In my experience, it DOES work with universal groups... Are you
suffering from token bloat? How many groups is the user a member of?
http://blogs.technet.com/b/shanecothran/archive/2010/07/16/maxtokensize-and-kerberos-token-bloat.aspx
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!

Cp6 + AS3 swf : "target == stage" not working

Hello,
I've done a SWF where I want to reset stage when clicking outside objects.
The SWF alone works perfectly but does not inside Captivate.
I did a simplified version :
mc.visible = false;
stage.addEventListener(MouseEvent.CLICK, clickOutside, false, 0, true);
function clickOutside(e:MouseEvent):void
          if (e.target == stage)
                    mc.visible = true;
The line :   if (e.target == stage)
does not work anymore.
Does importing SWF in Cp adds another level (stage is Cp scene, the SWF parent) ?
Thanks.

The captivate slide is the object capturing the event. Why don't you use an invisible button or transparent movieclip to capture the event? Then check if e.target.name == instance name.

Targetting mc not working

I have a movie clip, whose instance name is unique and is
'focusfacts'.
I have a function:
function scaledown() {
this.focusfacts.gotoAndPlay(2);
trace("I've found the scaledown function");
The function is called from a button elsewhere, and it can be
found... I get the trace value popping up nice and clearly. BUT,
for some reaon that absolutely bemuses me beyond belief, is that
the gotoAndPlay(2) command on the movie clip (focusfacts) is quite
simply not working. I have also tried naming the frame and telling
gotoAndPlay command referencing the name - nothing.
The only thing I can think of is that somehow the fact that I
am using scenes (even though the code and the mc are on the same
scene, in fact the same frame!), that maybe there's an issue with
referencing the mc itself?
All ideas welcome. BTW, except for the fact that the content
is different I have virtually the same code working fine for other
mcs in the scene. Weird.
Cheers, Matt

Matt-
Have you tried tracing both this and this.focusfacts in your
function call to see what the values are. This might help, because
if they come up as undefined then it might just not be referencing
your movie clip correctly. This can happen since scope is different
from regular old flash buttons and button components.
I am sure you have checked but is the content you want to
play on frame 2 of the focusfacts movie clip?
Let me know if you have any questions.
Sean

base target='_top' not working iframe head

i have dynamic loaded iframe in my application . when i click on the link inside the iframe i want to load the new page in parent window.i have manually added <base target='_top'> in the iframe head section . but link is displaying inside the iframe not in parent window. it is working all browsers excpet firefox.

A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code.

DW8 flash button target frame not working

I'm using DW8 v8.0.2 on Windows XP Home Edition SP1. I have
created a frameset by doing the following:
- Select File>New from menu bar
- Select Framesets category
- Select Fixed Top, Nested Left in Framesets column
- Select Create
Then, I add a Flash Button in the leftFrame and target the
mainFrame by doing the following:
- Select Insert>Media>Flash Button on menu bar
- Select Blip Arrow
- Set text to Information
- Set Size to 12
- Select my information.htm file from Browse button of Link
box
- Select mainFrame from Target box drop-down list
- Enter information.swf as filename in Save as box
- Select OK
Then, I select File>Save All
When I preview in a browser, I select the button & the
content opens in a new browser window instead of the mainFrame
frame. The same happens if I select leftFrame as target. However,
_top, _self, _parent, and _blank seem to work well. I renamed
mainFrame to contentFrame & it made no difference. I tried it
in IE and Netscape, no difference, except Netscape is a lot faster.
Tried text links to do the same thing & they work fine.
Tried other flash buttons and they behave the same as Blip Arrow
button.
Saw several discussions on web & in this forum, but no
solutions. Searched Knowledgebase, no solutions.
Saw some attempts at solutions dealing with button code, but
DW8 creates .swf file & button code is not editable.
Is there a solution to this problem?

I've encountered the same problem. This can't possibly be a
bug ... it's too common a function. I've noticed there has been no
reply to your posting. Have you figured out the solution from
another source?

Duplicate target database not working

Hi All,
I want to clone my exisitng DB to other.
I was refering the below link to do the same.
[http://web.njit.edu/info/limpid/DOC/backup.102/b14191/rcmdupdb006.htm|http://web.njit.edu/info/limpid/DOC/backup.102/b14191/rcmdupdb006.htm]
OS:Solaris 10
Oracle version:10.2.0.4.0
What I did tilll now:-
1) Created a database MYDB1 in archive mode
2) Created one tablespace, user and 1 table in DB
3) Registered the MYDB1 in RMAN Db.
4)Created a Pfile from MYDB1 database and changed db value and other values of MYDB1 to MYDB2(Database name to be duplicate)
5)Created a password file
6)Startup MYDB2 in NOMOUNT stage.
7) At RMAN prompt I have done below things to but i have getting the error
rman:rman:>rman target sys/mydb1@mydb1 catalog rman/rman auxiliary sys/mydb2@mydb2
Recovery Manager: Release 10.2.0.4.0 - Production on Fri Sep 7 12:20:22 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: MYDB1 (DBID=3867673817)
connected to recovery catalog database
connected to auxiliary database: MYDB2 (not mounted)
RMAN> DUPLICATE TARGET DATABASE TO mydb2;
Starting Duplicate Db at 07-SEP-12
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=162 devtype=DISK
WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to diskgroup only.
contents of Memory Script:
   set until scn 911233;
   set newname for datafile 1 to
"+disk2";
   set newname for datafile 2 to
"+disk2";
   set newname for datafile 3 to
"+disk2";
   set newname for datafile 4 to
"+disk2";
   set newname for datafile 5 to
"+disk2";
   restore
   check readonly
   clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 07-SEP-12
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/07/2012 12:21:01
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
List of Backups
===============
Key     TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
745933 B F A DISK        07-SEP-12       1       1       NO         FULL_BACKUP
745934 B F A DISK        07-SEP-12       1       1       NO         FULL_BACKUP
RMAN> list backup of database;
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
745933 Full    549.12M    DISK        00:01:19     07-SEP-12
        BP Key: 745935   Status: AVAILABLE Compressed: NO Tag: FULL_BACKUP
        Piece Name: /backup/oracle_backup/test_dir/rman_bkp/mydb1_0gnkjokf_1_1
List of Datafiles in backup set 745933
File LV Type Ckp SCN    Ckp Time Name
1       Full 980599     07-SEP-12 +DISK1/mydb1/datafile/system.256.793120373
2       Full 980599     07-SEP-12 +DISK1/mydb1/datafile/undotbs1.258.793120373
3       Full 980599     07-SEP-12 +DISK1/mydb1/datafile/sysaux.257.793120373
4       Full 980599     07-SEP-12 +DISK1/mydb1/datafile/users.259.793120373
5       Full 980599     07-SEP-12 +DISK1/mydb1/datafile/tbs_umesh.266.793207735
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/backup/oracle_backup/test_dir/rman_bkp/mydb1_%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/software/oracle/product/10.2.0/database/dbs/snapcf_mydb1.f'; # default
RMAN> exit
Recovery Manager complete.
@rman:rman:>Please Suggest where i am going wrong..
Regards
Umesh Gupta

WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to diskgroup only.
You must check DB_FILE_NAME_CONVERT parameter on MYDB2 database
or I think you must add DB_FILE_NAME_CONVERT, LOG_FILE_NAME_CONVERT to DUPLICATE Command.
DUPLICATE TARGET DATABASE TO MYDB2
SPFILE
SET
"DB_FILE_NAME_CONVERT"="+DATA/MYDB1/","+DATA/MYDB2"
... Regards
Mahir M. Quluzade
www.mahir-quluzade.com

ITunes songs are in 2 different folders...trying to consolidate but "consolidate" button is not working?

I have iTunes running normally and great on my Imac, all playlists work and various ipods synching properly. I am planning to copy my entire Itunes folder to an external drive so I can recreate my itunes on another computer (I have done this before).
In surveying my folders before the move, I checked the size of my iTunes Media Folder (where all of the songs should be) and it was only 24GB. Strangely, I found that the remainder of my songs (190GB) are in a folder called "Library" which at the same level as the iTunes Media Folder within the iTunes Folder. This could possibly be from me having had my original itunes library on an external driver years ago but no matter the reason, I would like to clean up the file structure and get the songs back to the iTunes Media Folder where they should be.
In preferences I have both boxes checked for organizing the library. I then clicked Consolidate. They computer seemed to go through every song but after an hour everything remained the same.
Does anyone know the best way for me to actually move those songs from the "library" folder back to the iTunes media folder without screwing up my playlists?
Incidentally, it's the version of iTunes that would have been most current during summer of 2012.

Consolidate copies files that are outside of the designated media folder inside it, connects iTunes to the new copies and leaves the originals behind. Occasionally file permission problems may prevent iTunes from creating intermediate folders for the path it wants to use and files can end up somewhere else the user can access, e.g. Library or Desktop folders. (N.b. my experience is mainly with Windows)
Have you checked some typical entries in iTunes via Get Info > Summary tab to see where the file in question is actually stored. Perhaps iTunes is no longer connected to these particular files which is why nothing changed.
tt2

Target _blank not working

This doesn't Work: <a href="https://www.freelizer.com/?q=buy" title="Special Offer" target="_blank" class="actbtn1" >Buy Now</a> 
The site opens, but in the same window, I want it to open in a new window/tab.
Works in IE10!

I tried and this is what I got;;;;;;;;;;;;;;;
'''This Connection is Untrusted
You have asked Firefox to connect
securely to www.freelizer.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
'''

Target boot not working

I am trying to target boot a 2008 Macbook Pro (dead logic board) with a 2006 Macbook Pro acting as the host via firewire. The hard drive from the target mac is not showing up on the host, any suggestions?

Put the HDD from the dead MBP in an enclosure and connect it to the 2006 MBP.
Ciao.

CFFORM target="_parent" not working

Hi,
I'm actually having some problems with form posting from a
popup window and I'd be glad if somebody could please help me sort
it out.
Well, the thing is, I have a local intranet containing a
topmenu.
The latter contains links to cfm files.
Now, one of these links opens a popup window which contains a
form.
When I submit the form from the popup window, the output
should be displayed in the main window.
I've tried <cfform action="process_form.cfm" method="post"
target="_parent">
But when I click on the Submit button, the output appears in
the popup window itself, not in the main window.
Is there anybody who can please explain to me how to solve
this please?
Thanks and regards,
Yogesh Mahadnac

Hi,
Can someone please answer to the message quoted below?
It's still pending.
Thanks and regards,
Yogesh Mahadnac
quote:
Originally posted by:
YogeshM
Hi,
I'm actually having some problems with form posting from a
popup window and I'd be glad if somebody could please help me sort
it out.
Well, the thing is, I have a local intranet containing a
topmenu.
The latter contains links to cfm files.
Now, one of these links opens a popup window which contains a
form.
When I submit the form from the popup window, the output
should be displayed in the main window.
I've tried <cfform action="process_form.cfm" method="post"
target="_parent">
But when I click on the Submit button, the output appears in
the popup window itself, not in the main window.
Is there anybody who can please explain to me how to solve
this please?
Thanks and regards,
Yogesh Mahadnac

Flat File Active Sync Target Resource not working

Hi there,
I've been trying now for several days to get user data from a csv-file into a target resource (mysql table in this case), but I don't get it working.
I created MySQL resource with correct schema mapping, then I created FFAS adapter for the csv file with correct schema mapping and added MySQL table as target resource (I chose "wizard generated input from" and basic configuration mode in active sync wizard). I also configured meta view (or identity attributes in IDM 6.0) with FFAS as source and MySQL as target for several attributes.
Accounts can be loaded from the csv (lighthouse users are created) and MySQL-resource can be assigned to users, but it would be pretty nice to have this done automatically. So what I want is load accounts from csv and add mysql resource without any user action required (manually assign resource).
Thanks for your help!

Right. Roles are a great way to assign Resources to users. They have the added value of being able to re-define the Role at a later time (e.g. users having Role X get an account in MySQL and AD, for example) through Bulk Action.
I typically do my ActiveSync processing through an ActiveSync input Form. I realize MetaView is available too, but I was "brought up" on the Form model and it still works for me.
If you go the ActiveSync Form route, you basically have to understand the Form as a tool to help you build the user View and extend the handful of attributes from your CSV file into a larger representation of the user. In other words, the Form is often used to create an Email Address (either in the Form or through Rule invocation), assign Roles/Resources, assign a Manager (IdM 7.0 and later), etc.

CS3 target="_blank" not working on this one link for me.

If you care to view the page, it is the little 'click here' link that I cannot seem to get to open in a new page. Please advise.
http://friesenequipment.com/servicespecials.html

<a href="pdfs/Binder2.pdf" target"_blank">Click
here</a></span
Funny that it does not seem to be appearing like that in DW.

Consolidate Target HFM not working

Similar Messages

Maybe you are looking for