Consolidation after copying Application

hello everybody,
i met with a consolidation problem. i copied an Application as test and changed the consolidation method of one entity from quote to at equity. after consolidation there is a big differece at the level of parent company in the test application. the original application runs but well. Has anybody advice? It would be greatly appreciated.

We do not care about the parent entity's contribution level, I was talking about the base entities' contributions. During consolidation HFM adds up the [Contribution Total] of all individual base entities to form the amounts of the parent entity's entity currency. Therefore, if you observe a difference in parent's entity currency, you have to see how this is formed -i.e. listing the contributions of base entities and summing them up. You should compare the base entities contribution of the source with the target application.

Similar Messages

  • Application locks up after copying cd

    After copying a cd to my hard drive and switching to another CD, the application locks up consistently. I cannot figure out why. Anyone have this issue? I am using XP Pro along with PC-cillin security.

    I've been able to copy multiple CDs in the past. Just recently itunes locks up after copying one CD to the itunes library. Do you have a solution?

  • HFM can not using copy application

    Dear All,
    I install HFM 9.3.1.4 on Oracle 9.2.0.6 DB. All functions are workable, only CopyAPP cannot work, after choice source & target application and start copy application; the error massage will come out and cannot go on....
    Do anyone know how to solve this issue and can give me some feedback...thanks

    What error are you getting?

  • Copying application system within a repository

    We have a scenario whereby a certain application system needs to be copied. The logic behind this is to have an extra version of the application system, after which the source version will be frozen. The newly-made copy will be used as a new work-copy. We do not want to use version control.
    When copying application system 1 (AS1) to AS2, it appears that certain references are going crooked. The copying itself was effected by right mouse clicking on highlighting AS1. (Should 'external references' have been checked before the actual copying action?)
    After actually having copied the application system, the following happens: Relationships can now be found cross-application system. For instance a business function in AS2 can refer to another one in AS1. This is not the desired effect. We would like for AS2 to act independent of AS1.
    Is this possible? Does anybody have any experience in this kind of matter? Designer version 9.0.4.5.6 is used. Any feedback would be more than welcome.
    Kind regards from the Netherlands.

    Hi Brett,
    You can export the application system present in the 6i repository into a dump file using Export utility available under Utilities--> Export menu option in Repository Object Navigator and then import it into the 9i repository using the import utility available under Utilities--> Import menu option again in Repository Object Navigator.
    If there are User Extensions in the 6i repository, then you will need to extract these User Extensions before exporting the application system and load these user extensions into the 9i repository before importing the dump into the repository.
    Extracting and Loading of user extensions can be performed using the Extract User Extensions and Load User Extensions utilities available under User Extensions in Repository Administrative Utilit

  • Interactive reports lost when copying application

    Hi,
    For developing purposes, I often copy an entire application and start working with a new version of the application on the same database. Now, I noticed that after copying an application, all the saved interactive reports were gone. The report itself still works fine, but the tab bar with saved reports is no longer there.
    Is this correct?
    Regards,
    Tijn

    Hello,
    I believe that's correct yes (it's linked to the user).
    You want the saved reports are also copied in your new application?
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://apex-evangelists.com/
    -- http://apexblogs.info/

  • Error after copying and modifying a page in APEX

    I have copied (duplicated) and modified a "Form on a Table with Report" in my application.
    The new form does the same as the old one, but it uses a different database table. The original form was made with the help of APEX.
    After I corrected the table and field names in the new form, I experienced the following error:
    The row edit icons on the new form refer to the records of the OLD table. If I click on them, the record edit screen appears with the content of the row in the old table. This causes an other error too, because the record number in the new table doesn't always point to an existing record in the old one. In this case I get an error: ORA-01403: no data found / Error Unable to fetch row.
    I don't know where to correct this hyperlink, I guess this is an automated link from the XE !?
    Thanks for any help in advance.

    Please post Application Express related issues on the dedicated forum at Oracle Application Express (APEX)
    Links' attributes are set at form creation time only so after copying they refer to the same objects the base page does.
    Przemek

  • I am unable to get Pages to launch after copying it to my laptop

    I am unable to get Pages to launch after copying it to my laptop.  Any suggestions?

    Don't copy the application, you're likely to miss a number of essential files. If you purchased it from the Mac App Store, launch the Mac App Store on the laptop & click "purchases" to install it. If you purchased retail disk or license, you need to use the original installer & have a family pack license.

  • How to use one application with multiple schema without copying application?

    Hi,
    Previously we are using oracle forms and by that we can manage by using a set of folders containing fmx and use different schema/database for different customers. so the source code comes from one individual file but used for different database users.
    is it possible to do this without copying application in apex?
    reason is because if applications are copied for each customer, and in a situation where a page has a bug, the developer must correct multiple pages across all the application. This would not be appropriate to manage.
    could this be done in apex? or is there any other approach?

    Hi,
    An application is tied to its parsing schema, so it is not possible to have one code base which you can then point to different schemas. I have seen some threads relating to dynamically setting the parsing schema, but I don't think it has worked to well, and would not be a supported configuration by Oracle.
    The normal way to do this is to have one schema and for each entity where it is logical you will have an extra key which is the customer id. I mention where it is logical, because not every entity needs its own data defined by customer. Some data will be common across all customers, such as lookup data and some entities will comprise child entities by which the data separation will be implied by the parent. You can then use Oracle's Virtual Private Database feature to implement a seperate view of the data through the application, based most likely on the customer who is logged on.
    Hope this helps.
    Regards
    Andre

  • Error copying application.xml icons: .../bin-release/assets/icons' does not exist

    Hi,
    Whenever I try to export the release build I get error from COmpiler during the process that "Error copying application.xml icons: Resource '/Project_Name/bin-release/assets/icons' does not exist."  I have specified 4 icons in the -app.xml file of sizes 16,32,48,128 which exist in the path specified and files are not corrupt. I have checked and unchecked the compiler directive "Copy non-embedded resources in the Output file" but that has not helped too.
    Can somebody please advise what do I do in this situation?
    We are using
    FB4 with Flex Hero(4.5) SDK and java heap space specified in .ini files is 1224m
    This is somewhat urgent guys...
    Thanks
    Shubhra

    Frank,
    Thank you for your answer. I had not checked (will do so tonight).
    I had considered it adequate to wipe out the entire system directory (thereby wiping out the integrated weblogic server), but perhaps it was not adequate? I did not specify that this is on the integrated server, but that is the case....
    Stuart

  • The Finder is not refreshing the icon thumbnail after copying

    The Finder is not refreshing the icon thumbnail after copying.
    I tried copying a couple of foders from the internal HD to a USB drive and the resulting icons kept an empty progress...
    WHY????

    Hello,
    It looks like possibly a Permissions problem... the X above the folder.
    In Finder do a Get Info on that drive, or the folders on that drive that you're trying to copy to.
    Úgy néz ki, mint esetleg egy Engedélyek probléma ... X felett a mappát.
    A kereső nem egy Get Info a meghajtón, vagy a mappákat a meghajtón, hogy akarsz másolni.

  • Multi-Mapping Error after copying into new namespace

    Hi everybody,
    we got a BPM running using a multi-mapping.
    We decided to design new namespaces. After copying every IR object (datatype, message-type, mappings etc.) --> SXMB_MONI shows a mapping-error.
    But when I take the payload and test the mapping, everything is fine?
    Any ideas?
    Regards Mario

    Hi,
      If your payload has Messages tab remove that..and test the payload.
    Payload doesn't have any Messages tab.
    Just i have given example payload..this payload two strucures it will split into twofiles..and compare your payload should be like same
    <?xml version="1.0" encoding="UTF-8"?>
    <STRUCTURE>
    <EMP_DETAILS>
       <EMPNO>123<EMPNO>
       <EMPNAME>XYZ<EMPNAME>
    <EMP_DETAILS>
    <STUDENT_DET>
       <STUO>123<STUNO>
       <STUNAME>XYZ<STUNAME>
    </STUDENT_DET>
    <STRUCTURE>
    Regards,
    Venu.

  • After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    How is it not working?  And how are you doing it?  Drag the movie onto the iTunes icon on the Dock...  what happens?

  • Pocket slow down after exit application

    Hi,
    I have an application that runs normally in a Pocket PC, Windows Mobile 2003, 64 MB RAM. But when i exit application, the Pocket almost freezes ! Sometimes I need to inicialize Pocket again.
    I exit my application this way:
                ConnectDB.disconnect(); 
                try{
                    Config.getClientSocket().getSocket().close();  //Finish Socket connection with server application
                }catch(IOException e){
                    MsgDialog msg = new MsgDialog(this, true, "Falha ao encerrar conex�o ", MsgDialog.MSG_WARNING);
                    msg.dispose();
                new Thread(){  
                    public void run(){
                        try{
                            sleep(400);
                        }catch(InterruptedException e){
                }.start();
                System.exit(0);           I have two threads I've created running at this moment. Could it be a problem for Pocket performance after exit application ?
    Thanks !

    Hi,
    I have an application that runs normally in a Pocket PC, Windows Mobile 2003, 64 MB RAM. But when i exit application, the Pocket almost freezes ! Sometimes I need to inicialize Pocket again.
    I exit my application this way:
                ConnectDB.disconnect(); 
                try{
                    Config.getClientSocket().getSocket().close();  //Finish Socket connection with server application
                }catch(IOException e){
                    MsgDialog msg = new MsgDialog(this, true, "Falha ao encerrar conex�o ", MsgDialog.MSG_WARNING);
                    msg.dispose();
                new Thread(){  
                    public void run(){
                        try{
                            sleep(400);
                        }catch(InterruptedException e){
                }.start();
                System.exit(0);           I have two threads I've created running at this moment. Could it be a problem for Pocket performance after exit application ?
    Thanks !

  • How to find the folder (EBS_R12) in OEL 5 after copy/paste from Windows 7 ?

    Folks,
    Hello. I have just installed Oracle Linux 5 as Guest OS on the top of VMPlayer. Host OS is Windows 7.
    I downloaded Oracle E-Business Suite R12 from edelivery into Windows 7 in a folder(EBS_R12) on my LapTop screen.
    In order to install EBS R12 into Oracle Linux 5, I copy/paste the folder EBS_R12 into Oracle Linux 5 screen. The file size is about 50GB. After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.
    Can any folks tell me where is the folder (EBS_R12) in Oracle Linux 5 after copy/paste from Windows 7 ?

    Hi,
    After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.Was the copy/paste successful.
    If yes then you can do the following
    #find / -name EBS_R12 -type d -print
    (Assuming you copied the folder "EBS_R12" , But not its contents).
    Thanks

  • Change the DB_LOCATION of a Table in Mapping after Copying it

    Hello!
    Does anybody know how to change the property DB_LOCATION for table in a mapping after copying it to another modul withhin the same project with OMB PLUS.
    After copying the mapping all objects still points to the old objects in the repository. But this objects are now in the wrong module. I have the same repository objects also in the new module and i want to change the mapping operator to point to the objects in the new module.
    In the mapping editor you achieve this by reconciling the mapping object with the new object in the other module. How can i do this with OMB PLUS?
    Thanks in advance
    Alexander
    Edited by: user13336549 on 14.09.2010 07:40

    Hi Alexander
    After copying a table to a different module, edit the module to set the data location, configure the module to define the location and synchronize the mapping to use this table.
    In OMB to synchronize inbound and outbound use OMBSYNCHRONIZE command
    Inbound:
    OMBSYNCHRONIZE TABLE '$OMB_CURRENT_PROJECT/SALES/TABY' TO MAPPING 'M_W_PARAMS' OPERATOR 'TABY' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
    Outbound:
    OMBSYNCHRONIZE MAPPING 'M_W_PARAMS' OPERATOR 'TABX' TO TABLE '$OMB_CURRENT_PROJECT/SALES/TABX' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
    Cheers
    David

Maybe you are looking for

  • How do I get the Firefox icon on my start bar?

    I just have a generic icon on my start bar (and in the menus). The Firefox icon does not appear. This has no impact on the operation of Firefox. It is only on the desktop and menus. == This happened == Every time Firefox opened == Within a day or two

  • How do I get rid of a Google Extension page?

    How do I get rid of a Google Extension page?

  • What is the easiest way to import my DVD collection in to iTunes 12?

    Hi all, I'd be grateful for advice on the best way to import my DVD collection - all legitimately purchased - in to my iTunes collection. I'm currently running iTunes 12 via a 2013 iMac running OS 10.9.4, on a home network including an Apple TV unit.

  • SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error:

    Hi, Our Production server is in High Availability on Unix ( DB node active & CI Node active). When I am executing the initialize tape or triggering the backup from DB13 in our production we are getting the below error. SXPG_COMMAND_EXECUTE failed for

  • IndexOutOfBoundsException in OTD

    What does in mean when I get an IndexOutOfBoundsException in my OTD? I'm trying to create an OTD using the MFS wizard. I get this error whenever there's a DO statement in the MFS file. Seems like the MFS wizard isn't doing it's job well. Thanks.