Consolidation multiple  operational chart of accounts

am on a consolidation project and I have the following scenario.
There are about 25 companies spread across the globe.
The requirement is only legal consolidation.
But unfortunately they dont use global chart of accounts. Out of 25 company codes 20 companies use CoA A and the rest of the CoA B. Had it been a single CoA it would have been a straight forward implementation. SInce it involves two CoAs I would like to know how to go further on this. I know BIW based BCS can handle this. But when it comes to the question of real life implementation every one is tight lipped. Appreciate if anyone could throw some light on this.

Dan
<b>Appreciate your comments on this which will add value</b>.
Yes. It is not a straight forward implementation but not too complex. There are more than one way to tackle this issue. But my solution is based on maintenance perspective since there will be regular addition of GL accounts. You have also not mentioned whether your client has Group chart of accounts in place. I assume that you dont have group chart of accounts and only operational chart of accounts in place for these two sets of companies.
Solution 1. At the time of extracting the data from R/3 table you can map it to a group chart of accounts in transfer rules.
Solution 2 You can also do a mapping between operational chart of accounts and group chart of accounts when you are mapping between source data basis and data basis.
Solution 3 You can create look up table (Ztable) separately containing the following fields
name of the chart of accounts, operational GL accounts and group chart of accounts. When the data extracted from R/3 data will look ino this table and group account number will be populated based on this mapping table.
I would recommend this since this easier to maintenance since users need not go into BIW or SEM whenever a new account is added into R/3 side.
Hope this gives you some idea. Pl let me know if you have more questions.

Similar Messages

  • Linking Multiple Group Chart of Accounts

    Hello,
    Our organizational structure is like
    ABC Holding Group
    in ABC Holding Group there are several group of companies like AB Group, BF Group etc.
    In AB Group, we have 2 companies PERU and JKRY
    We have some confusion about the structure of COA in SAP, we are setting Operational Chart of Accounts for PERU and JKRY and will assigned Group chart of Accounts for AB Group then is it possible to assigned AB Group to ABC Holding Group by using ABC Holding group (Group chart of Account)?
    ABC Holding Company (Group Chart of Accounts) Assigned AB Group COA
    AB Group (Group Chart of Accounts) Assigned PERU and JKRY Operational Chart of Accounts
    Thanks,
    Abid

    Hi Suresh,
    Group Chart of Accounts Mainly Used for Consolidation Purpose,
    Follow the Following Procedure for Config Group Chart of Accounts,
    1) First Create Group Chart of Accounts in T.Code:OB13
    2) than Create Create the Operation Chart of Accounts same T.Code: OB13
    3) while Creating the Operational Chart of Accounts,
    In Consolidation
    Group of Chart of Accounts: Here you assign earlier you created Group Chart of Accounts,
    4) Than In FSP0  Create the Group Chart of Accounts, this Code you Have to assign while you are Creating the Operational Chart of Accounts

  • GL accounts in place in operational chart of accounts.

    Hi
    I want to check the G/L account is an operational chart of account or not?
    I have to validate this using abap code.
    Can you tell me which rables and which fields i should check.
    Thanks in advance.

    Check the chart of accounts (KTOPL) assigned to the GL account in table SKA1.  If that KTOPL is assigned to one of your company codes in table T001, then the account is an account in operational chart of accounts.

  • Country chart of accounts mapping to operational chart of accounts

    Hi All,
    We intend to use country specific chart of accounts to one of our company code along with operational chart of accounts. We try to map 1 operational G/L account to a group of country G/L accounts, system not allowing doing this, understanding it allows only 1:1 mapping.
    Is there any work around to achieve this?
    Requirement at country COA level, G/L accounts should be created and reported by Department: e.g.
    Salary u2013 Finance u2013 600100
    Salary u2013 R/D u2013 600110
    Salary u2013 Marketing u2013 600120
    The same way for couple of P&L accounts to be created, but in operational COA we do have only one expense or revenue account these are used across the globe (all company codes).
    I heard that, it is possible in SPECIAL PURPOSE LEDGER, creating new ledger and assigning the country specific chart of accounts, inputting some validation to achieve this purpose.
    Simulating the purpose, with an example; during posting, where Operational COA G/L ACCOUNT equals to specific COST CENTER check FUNCTIONAL AREA and pick the appropriate country COA G/L ACCOUNT .
    Substitution for Validation; Functional Area = Country Specific G/L Account
    Currently Iu2019m using the mySAP and using New G/L (not document split), would like to achieve the Special Purpose Ledger functionality by creating a new ledger type in New G/L to map country specific chart of accounts to operational chart of accounts (N:1).
    Please share any other alternatives avail to achieve this.
    The reports are needed by functional area,
    Balance sheet by functional area G/L accounts (country specific COA)
    (Figured some difficulty to assign functional area to G/L accounts, though I have cost of sales accounting is activated)
    T/B by functional area G/L accounts (country specific COA)
    Journals by functional area G/L accounts (country specific COA)
    Document line items by functional area G/L accounts (country specific COA)
    Please try to share you thoughts and advice on this.
    Thanks.
    Vyas

    Dear  Vyas,
    We have similar requirement as yours
    Requirement at country COA level, G/L accounts should be created and reported by Department: e.g.
    Salary u2013 Finance u2013 600100
    Salary u2013 R/D u2013 600110
    Salary u2013 Marketing u2013 600120
    I would like to know how are u handling this situation.
    Thanks and Regards
    Anil

  • Where we assign operational chart of accounts to country chart of account

    Hi Expert,
    where we assign operational chart of accounts to country chart of account.
    thnx,

    Hello,
    Use T.code OB62.
    SPRO --> Fin. Acc (New) --> Gen Led. --> Master data --> GL --> Prep --> Assing Co. Code to Chart of Accounts.
    Regards,
    Jaymin R. Bhatt

  • How to integrate operating charts of account to country and group coa

    Hi Sap gurus,
    How to integrate operating chart of account to country and group chart of account
    Regards,
    Rajesh

    First create the country chart in OB13 and assign the same to OB62.
    Then for each operational chart of account, enter the country chart of account in FS00 and this will be captured in field Alternate account number.
    The relationship between operational to country chart of a/c is 1:1.

  • Operating Chart of Account

    Hello SAP Gurus,
    I need your valuable suggetions for creating a Globla chart of account for doing reporting in IFRS, US GAAP reporting and Local coutry's reporting.
    Current Situation:
    Company codes                     Country                 Chart of account
    0001                                       A                           A001
    0002                                       B                           B001
    0003                                       C                           C001
    0004                                       D                            D001
    These 4 company codes are in different country and follows different chart of account and based on that they are doing reporting to respective countries. till now theq are not interlinked.
    now,    for above mentioned reporting purpose,  if we create a Global operating chart of account (COA) and assign all the 4 company codes to this Global operating COA, according to me we can do the reporting.
    But,
    I am not aware about what various detailed steps and procedures involved.
    Can anybody who has done this kind of implementation or experience, please suggest me stepwise procedure for this.
    Thanks  a lot for your cooperation.
    Regards,
    Jigs.

    Hi Jigs,
      .For this particular  scenario, we should opt for Group Chart of Accounts.
       a)Create one Operative Chart of Accouts (OB13)  and asssign this particular operative Chart of accounts to all four Chart of Accounts in Group Chart of accounts field in OB13.
       b)You can create Separate Account Groups(OBD4) and reatined earings account(OB53) for this new operative chart of accounts.
      c)Create separate G/L Accounts for New Operative Chart of Accounts.(say for example Salary G/L a.c no 4444444)
    d) and this new G/L Account to all 4 G/L Salary Master records in Group account No field in Chart of Accounts  segment.
    in the above we can link for all four chart of accounts to one operative chart of accounts.
        the above solution may be valuable to u.
    Let me know for better sol.
    Thanks & Records.
    Kiran Konujula

  • Changing of Operational Chart of accounts

    hi,
    Recently we have created a new company code and assigned an existing operational chart of accounts of the other Comapany code existing under the group.
    Now the client says he does not require all the Gl accounts of that Operational COA.
    Can we create new operational COA and assign to the new comapany code, as in the old COA no entries are posted yet.
    please suggest.
    regards
    navuduri

    Hi
    Reset company code data before changing the chart of accounts
        Message no. FC140
    Diagnosis
        You have selected a different chart of accounts for a company code.
        You must, however, reset the company code-specific data for the old
        chart of accounts beforehand.
    Procedure
        If you really want to allocate a different chart of accounts to the
        company code, first of all reset the company-code specific data for the
        old chart of accounts.
        First of all you must, if it exists, reset the transaction data for this
        company code.
    Finally, carry out the resetting of the company code-dependent G/L
    account master data (without the general master data).
    Note:
    When dealing with large quantities of data, resetting the master data or
    transaction data can be very time-consuming. In this case, it is
    advisable to schedule the running of these reports as a batch run.
    For this use OBR2
    Srinivas

  • SEM BCS - Consolidation Chart of Accounts

    Hi all,
    For the SEM-BCS implementation I am using ECC as the operational system. ECC folks are in the process of building a group chart of account in FI.
    Can you suggests the work around to map group chart of account to consolidation chart of account in SEM-BCS?
    Thanks in advance
    RJ

    I am not sure if anybody has replied you.
    In SEM 4.0, You need to download the chart from R3 and then upload as hierrachy in the UCWB workbench.
    In SEM.6.0, You have master data load direct from R3 and you can do the same.
    Functional advice:-
    Normally R3 creates operational chart of account in R3. Each account has a group account feild, if populated the mapping of operational chart to group is amintained in R3 itself.
    You can upload the GL master with group chart account number and then this will obviously have the mapping for your use in BCS.
    Consolidation chart of account in R3 (if its the accepted group chart) will be the same group chart which your ECC guys are preparing.
    Are they using ECCS in R3??
    Rgds
    Samir Neji

  • Documentation about Chart of Accounts (Group, Operative, Country-spec.)

    Hello,
    I need a documentation (a graphic will be very fine) of the relationship/usage of the three platforms of chart of accounts.
    Group chart of accounts
    Operative chart of accounts
    Local (country-specific) chart of accouts
    At "help.sap.com" i just could find a written one, but as i have to use it in a presentation, a picture/graphic will be much better.
    Thanks in advance,
    Sepp Mayer

    Hi
    If you find any documentation please forward to me. my email id is [email protected]
    Regards
    Uday

  • Mandatory fields while using Group chart of accounts

    Hi,
    Which are the mandatory fields while maintaining GL accounts in FS00 if i am using Group chart of accounts.
    And how attached these group chart of accounts gl to the operational chart of account GL.
    raj

    Hi,
    the assignment from operational chart of accounts to group chart of accounts is done in OB13. Follow the steps in Customizing IMG FIn. Acc. (new) / Consolidation preparation (new) / General specifications / G/L and FS Charts of accounts...
    Best regards, Christian

  • Company code chart of accounts

    Hi
    can any one of you explain me the procedure to create company code GL accounts and the group GL accounts:
    our client scenario is:
    he has a 5 different company codes and in those 4 company codes are using one kind of GL accounts and one company code is using different kind of GL accounts.
    how to acheive this by using group chart of accounts and company code chart of accounts
    explain me the step by step process (dont mind) because iam new to SAP.
    thanks in advance
    Venkat
    Moderator: Please, read SDN rules and search before posting

    HIi
    Mater chart of accounts is nothing but the main account that is created at the client level.
    we have 3 COA
    1. Group chart of accounts
    2.country specific chart of accounts
    3. Operating chart of accounts
    we can have maximum 3 chart of acocunts assigned to each company code
    Company code chart of accounts is can be operating chart of account which contains the group of account used by that company...
    If some specific requireement is there for the country reporting purpose than we need to use that and maintain that ,
    Group chart of account is used for the consolidation purpose.
    like we have 6 company codes under one company in differnet countries.. so here they will have one common COA which will consilidate the business of all 6 company codes...
    Hope u understand wht u wanted..
    sejal singh

  • Country chart of accounts and alternative account No.

    Hello Experts
    we're using country chart of accounts and alternative account No. to fullfill FICO China localization, now I have below questions:
    1, In manual FI posting in company code of china, eg. by transaction code FB01, which account number is used for this posting? Account number in operational chart of accounts or account number in country chart of accounts?
    2, The alternative account No. in country chart of accounts also needs to be created with compnay code level master?
    Or we just need create account in operational chart of accounts with company code level master?
    3, If we use account in operational chart of accounts for FI posting  by company code of China, after posing, two accounting documents are generated, one with account in operational chart of accounts? Another one with account in country chart of accounts?
    4. Country chart of accounts is used for consolication purpose? Is there some difference with group chart of accounts?
    Thanks,
    Nicole

    Hi Nicole,
    1, In manual FI posting in company code of china, eg. by transaction code FB01, which account number is used for this posting? Account number in operational chart of accounts or account number in country chart of accounts?
    > Account No. in Operation Chart of Accounts is always used for FI posting. Alternative Account No. is always for information purpose.
    2, The alternative account No. in country chart of accounts also needs to be created with compnay code level master?
    Or we just need create account in operational chart of accounts with company code level master?
    > You only create Operational Chart of Accounts for posting. Alternative Account No. can be of two types 1):-is a freely definable text and you don't have any chart of Account for that, for example say legacy No. 2) The Account No. from a country Chart of Accounts, in this case you create a GL in Country Chart of Accounts.
    3, If we use account in operational chart of accounts for FI posting by company code of China, after posing, two accounting documents are generated, one with account in operational chart of accounts? Another one with account in country chart of accounts?
    > Not True. Only Operation Chart of Accounts will get posted. In the Alternative Account No., the Alternate Account No. will get populated.
    4. Country chart of accounts is used for consolidation purpose? Is there some difference with group chart of accounts?
    > No. Country Chart of Account is used for External reporting.. Group Chart of Account is used for Consolidation.
    Regards,
    SAPFICO

  • Reg. Company Code and Charts of account

    Hi All,
                I am trying to create a customer but Since there is no GL Account not able to complete the creation of Customer. I tried creating a GL Account but there also i am not able to save the GL Account becuase its throwing an error Select the Charts of Account.
                 I need to know what is Charts of Account means (as of what I know is the chart which shows the Profit & Loss in country specific format)  and how does it link with the Company Code.
    Regards,
    Senthil Nattamai Sekar

    Dear Senthil,
    Chart of accounts
    A classification scheme consisting of a group of general ledger (G/L) accounts.
    A chart of accounts provides a framework for the recording of values to ensure an orderly rendering of accounting data. The G/L accounts it contains are used by one or more company codes.
    For each G/L account, the chart of accounts contains the account number, the account name, and technical information.
    A chart of accounts must be assigned to each company code. This chart of accounts is the operative chart of accounts and is used in both financial accounting and cost accounting. Other charts of accounts include:
    Country-specific charts of accounts -
    These are structured in accordance with legal requirements of the country in question
    Group chart of accounts -
    This is structured in accordance with requirements pertaining to Consolidation.
    IMG path do define and assign chart of accounts is
    SPRO>IMG>Finnancial accounting>General Ledger Accounting>G/L Accounts>Master Records>Preparations>Edit Chart of Accounts List>Assign Company Code to Chart of Accounts
    I hope it will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Jul 24, 2008 10:36 AM

  • Chart of Account and Country COA

    Hi All,
    Can some tell me difference between Chart of Accounts and Country Chart of Accounts. And for What purpose Country Chart of Accounts is used.
    Regards,
    Kiran.

    Hi,
    Chart of Accounts
    Definition
    This is a list of all G/L accounts used by one or several company codes.
    For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a company code.
    Use
    You have to assign a chart of accounts to each company code. This chart of accounts is the operating chart of accounts and is used for the daily postings in this company code.
    You have the following options when using multiple company codes:
    You can use the same chart of accounts for all company codes
    If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
    In addition to the operating chart of accounts, you can use two additional charts of accounts
    If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
    The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the company codes which use different charts of accounts together or separately.
    Structure
    Charts of accounts can have three different functions in the system:
    Operating chart of accounts
    The operating chart of accounts contains the G/L accounts that you use for posting in your company code during daily activities. Financial Accounting and Controlling both use this chart of accounts.
    You have to assign an operating chart of accounts to a company code.
    Group chart of accounts
    The group chart of accounts contains the G/L accounts that are used by the entire corporate group. This allows the company to provide reports for the entire corporate group.
    The assigning of an corporate group chart of accounts to a company code is optional.
    Country-specific chart of accounts
    The country-specific chart of accounts contains the G/L accounts needed to meet the country's legal requirements. This allows you to provide statements for the country's legal requirements.
    The assigning of an country-specific chart of accounts to a company code is optional.
    Integration
    The operating chart of accounts is shared by Financial Accounting as well as Controlling. The accounts in a chart of accounts can be both expense or revenue accounts in Financial Accounting and cost or revenue elements in cost/revenue accounting. You can find additional information on this subject under Cost Accounting and Chart of Accounts.
    Thanks,
    Rau

Maybe you are looking for