Consolidation multiple STO PO to Create one Delivery with the same date

Hi:
Want to create one delivery notes from mutiple STO PO using VL10B.
with the same delivery date.
How to do it

Basically the criteria to combine more than one STO into one single delivery
is STO delivery date and receiving plant. If they are the same then one delivery
is created and different delivery items are summed.
Good reference available in SAP notes:
386340 - Grouping purchase orders into one delivery using Vl10*
There is more information in another existent thread:
Combine STO into same DN

Similar Messages

New entries created for RPTQTA00 with the same data

Hi,
Whenever I run RPTQTA00, it creates a new record in IT2006. If i run the report again, another record is created with the same data. How can i prevent this? It should only update the existing record.
thanks,
Steph

Hi
Can you please paste the piece of code written for the same to get the idea.
Thanks
LG

Hi, I use two email addresses within one account with gmx. I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

Hi, I use two email addresses within one account with gmx.
I created one account with the first email address now. How do I add the second one to this account?
Now it looks like this.
One account was opened with address A.
I receive in this account emails for address A and B.
But I can only write and answer with address A.

Hi Rudegar,
Sorry for my late reply.
It s not the amount of accounts I'm struggling with.
When I create now for both email addresses one account, then I receive the same emails two times.
That is not what I want.
Because on gmx the two email addresses have the same inbox and outbox.
E.g. I can login to my gmx account either with email A or B. It doesn't matter.
Now I want to have the same on my ipad.
One account with both email addresses.

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

If you registrate one Apple ID for each iPhone/iPad, you'll get 5GB on iCloud for each Apple ID, right? I have two iPhones and one iPad with the same Apple ID, why can't I get 5 GB fo each of them?

Actually, everyone missed one point, when a device is priced, the cost of icloud storage space for that device is also included in it that is why they are able to give you 5gb each for each user ID, in nutshell there is nothing free coming with apple device purchase, it is paid for. What they are trying by giving only 5gb per user ID irrespective of the number of devices used is pure broadlight looting, they take money from you when you buy each device and give you nothing, This is a case of goods and services bought but not fully deliverd ie apple can be suied for discreminatory treatment towards it's users. I wonder why no one tried this yet in America where everyone sue everyone for petty things..... there is no one to take up this issue? . if tim got any love for the guys who shell out money for the devices his company makes, he should be implimenting this as priority before someone wake up from sleep and sue him.

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

HT4623 How can I join 2 separate account one for my IPhone and one to my IPad to one account with the same ID and Password?

How can I join 2 separate account one for my IPhone and one to my IPad to one account with the same ID and Password?

You cannot combine two different Apple ID's into one ID.

Can you install logic pro onto more than one computer with the same cd key?

can you install logic pro onto more than one computer with the same cd key?

Only a desktop and a laptop, both of which must be Macs you own.
(60296)

Why can't I set up more than one ipod with the same e-mail account?

Why can't I setup more than one ipod with the same e-mail account?

Not really sure what you are doing that this doesn't work...I have an iPhone, iPad and iPod all using the same email account without any conflicts. Can you explain a littl about what you are trying to do that isn't being allowed?

Can I create a database with the same name and DBID that one is dropped?

Hello,
I need to restore a backup database, made with Oracle Enterprise Manager, in a new one, because the original is dropped. I've tried it with the recovery tools but fails, i suppose because the dbid's are not the same.
Then, Is it possible create a new database with the same old database dbid to restore de backup?
Thank you very much.
P.D.: I've too THE OLD spfile---.ora y el pwd---.ora

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

Newbie : How can i create 2 users with the same name on diff domain name ?

I have two domains on my server
exemple1.com
exemple2.com
and i want to create one user for each domain with the same name
[email protected] and [email protected]
curently i can create one user, and it's the same user for both domains :-/
how ?
thanks
Hète

I must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?

Create a node with the newest date only

Hi, I want to create a node in the target, only by the newest date from the source. The source is an Idoc with, say, 3 segments of the same kind, with different dates. Only the segment with the newest date, should be created in the target.
Any Ideas?

Hi,
it's easy but with user defined functions:
- put all segments into the UDF
- then inside this UDF choose the one with the
latest date and put it into the array (global variable)
- then take the values from the global variable
to fill the sements (from new UDFs)
you could also try with
DateBefore and DateAfter functions
and try to do it without UDFs
with logic like
if date1 DateBefore date2 then ....
Regards,
michal

Can I populate a text field in one PDF with the modification date of a different file ?

Rather convoluted problem here but I'm trying to place a text field on a PDF document that serves as the main menu page for a library of interlinked PDF documents
The complete library contains over 7,000 files and additions are added and documents changed almost daily.
We currently use batch files to open the main menu from it's shortcut and this runs a check on a sync log file (.txt) to ascertain when the last time the user synchronised with the server to get the latest copy of the files.
Between a certain time range they are told how long it has been since they sync'ed and are offered the option to sync before opening, after a prescribed timeframe they cannot enter without synchronising. We use Allways Sync to conduct the file synchronisation with our mother files on our server.
What I'd like to do is take advantage of Allways Syncs automatic synchronisation options to synchronise on log on and at prescribed idle periods there after.
This works fine but I'd like the text field on the main menu PDF to say when the last synchronisation took place - easy if the main menu is the last file modified .. just use info.modDate.
However, the main menu is rarely modified therefore I wish to import the text to populate the text field from a different file.. either by interrogating the other files modifictaion data (though I doubt Acrobat can do this) or by simply importing some text stored in another file (a .txt file?) which has previously been created by batch file commands.
Any assistance would be greatly appreciated.
Regards,
Nifty Styles
(Norfolk, England)
P.S. I'm using Acrobat 8.3.1. Professional on Windows XP (SP3).

Thank you for all your help above.
Just to confirm your advice, am I right with the following conclusions? :
1. The script (function) to fill the text field with the modification date of a different PDF file needs to be stored in a folder level .js file.
2. The document containing the text field needs to call the .js function either within the document script or within the custom script property of the text field itself.
Further to that can you just advise on the syntax for accessing the modification date of the other document.
Do I need to assign a variable to the address of the file to be used, and then use this variable in the text form filling script (as below) or can I use a direct file reference at the .modDate command.
var LastSync = "C:\sync\bin\lastsync.pdf";
var strMsg = util.printd("h:MM tt",LastSync.modDate) + " on ";
strMsg += util.printd("dddd, d mmmm, yyyy",LastSync.modDate);
this.getField("LastSyncDate").value = strMsg;
If the syntax is totally different to the above I would be very grateful for some guidance in the right direction.
I much appreciate your time to help me ... I'm almost there.
Kind Regards,
Nifty

How do you stop your phone from creating two albums with the same photos after syncing?

When I first bought my phone I was able to sync my photos by checking the folder I wanted synced under iTunes. This put all those photos on photo library on my phone. I recently added more photos to that folder and tried to sync them it now put them in the photo library album and also created another album with my folder name. So I have two albums with the same photos. I tried in checking that folder in iTunes and of course they're not in my photo library. Please help. I don't want two albums with the same pics

This is how Apple has always handled photos. nothing has changed at all.
Just as your music is in your library and you can access those exact same songs from a playlist, all of your synced pics are in the Photo Library and those exact same photos (NOT duplicates) can be accessed from the album name that you chose to sync.

How to create a folder with the name = date (e.g. "20030512") with LV6.0

hi,
i want to create folders with the name = date automaticly.
i found several solutions here, but all in LV6.1. could somebody give me an example in LV6.0 ?
I tried it with "get date-string" but that date-string has "." in it :-(
6.1-example :
here

Hope this will help!
ian.f
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
folder_create_2003.vi ‏66 KB

Consolidation multiple STO PO to Create one Delivery with the same date

Similar Messages

Maybe you are looking for