Consolidation SEM BCS Vs EC CS

Hi All,
Please explain me the difference btween
1. Consolidation SEM BCS and Consolidation EC CS.
2. under what circumstances each SEM BCS or EC CS will be used.
3. if possible plz give an example or a scenario.
thanks in advance. i apperciate for reply.
Regards
Sirisha

Hello
SEM BCS and ECCS both are consolidation applications of SAP System.
ECCS is based on R/3 where as SEM BCS is based on BW.
There are no special circumstances, however SEM BCS is the latest version. Moreover the recent direction of SAP is towards BPC u2013
Business Planning & Consolidation.
Hope this helps.
Ambadas

Similar Messages

FI-GL Activating for Consolidation SEM BCS

Hello together,
can somebody tell me in a few steps how to activate the FI-GL (0FI_GL_6) that it can be used for consolidation in SEM BCS. My problem is that FI_GL_6 (and also FIGL_C10 for new FI-GL) have not all required fields for consolidation in SEM BCS, especially movement type is missing.
I know how to use the BCS data collection functionality "load of data stream" and I also know how to activate the BI Content for FI (and how to connect the data basis from BCS with the "FI Cube" via source data basis).
But how can I prepare the FI Cube (DataSource, InfoSource) that it concludes all neccessary informations?
I need following InfoObjects in the BI Content: how to?
these InfoObjects are not containend in the standard FI-GL Business Content...or do you know other possibilities for getting FI-GL data in BW and ready for consolidation in BCS?
0PCOMPANY
0MOVE_TYPE
nicht notwendig
0FUNC_AREA
0COMP_CODE
0PROFIT_CTR
0COUNTRY
0PCOMPANY
0GL_ACCOUNT
Thanks for support

Hi MP M,
Hi Install all the components related to that flow.I mean Datasource,Transfer rules,Infosource,Update rules,Cube.Then nothing is missing in this flow which are in BI Content.
For the Info objects not in the flow
Search them individually from the BI Content and Install them.Later you map them respective fields in the transfer rules manually.Then maintain update rules to them.
Hope this helps
Regards
Karthik

CONSOLIDATION EC-CS Vs SEM-BCS

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. no ALL CAPS in the subject. I'd also recommend that you post in the Consolidations forum instead of here.>
Hi All,
Please explain me the difference btween
1. CONSOLIDATION SEM BCS AND CONSOLIDATION
EC CS.
2. under what circumstances each SEM BCS or EC CS will be used.
3. if possible plz give an example or a scenario.
thanks in advance.
Regards
Sirisha

Hi,
BCS is Business consolidation and Simulation and EC CS is Consolidation and Simulation in ECC 6.0 BCS is entirely out side R/3 and EC CS is R/3, here they have included some features in R/3 for consolidation and at the same time BCS is out side R/3 and has more features....while taking the reports then you take help of BW... end of the day you will get the data from R/3 even for BCS also...
Hope understood
Thanks,
Vasu...

Implementation of SEM-BCS

Hi Experts,
i am trying to implement SEM-BCS. I am still new in it. Are there any documentation about step by step to configure SEM-BCS?
Thanks a lot for your help.

Hi,
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=bw-bcs&cat=sdn_all
Basics of BCS modelling -
Key figures -
You are generally not permitted to change any properties of the key figures used in SEM-BCS. The only exceptions to this are options that affect the display in Business Explorer and the "Characteristic is document property" setting.
If you want to use your own InfoObjects as key figures for totals records in the InfoCube, consider the following conditions:
1. SEM-BCS supports four roles for key figures in the data stream for totals records: Value in group currency, value in local currency, in transaction currency and quantity. You can assign a maximum of four key figures in the data basis accordingly. If you include additional key figures in the InfoCube, these cannot be processed in the consolidation. You are not permitted to assign other roles, such as 'subassignment,' to key figures either.
2. In SEM-BCS, the values are always stored periodically in the database. Furthermore, year-to-date values or non-cumulative values are not managed separately but result from cumulation in each case over the periods of the current fiscal year up to the current period. (This is a purely technical restriction. The consolidation functions greatly support the process with year-to-date values.) Therefore, you must define InfoObjects as cumulative values. Proceed according to the 0CS_TRN_GC, 0CS_TRN_LC, 0CS_TRN_TC, 0QUANTITY InfoObjects that are delivered.
3. You cannot use referencing key figures in SEM-BCS. If you want to define a key figure with a reference, to transfer the technical properties of the referenced InfoObject identically, you can simply create this with a template instead. However, if you want to use the special BW function linked with referencing key figures (see the online documentation in the BW), enter the referencing key figures in the InfoCube, but assign the referenced key figures to the data basis.
Characteristics
With the following characteristics, you are not permitted to make changes to the properties. Once again, the only exceptions here are the options that affect the display in Business Explorer:
0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR, 0BCS_AREA, 0BCS_AUTODL, 0BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COITOA, 0BCS_CTFLG, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWNEG, 0BCS_GWPROC, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_ORGCH, 0BCS_ORGCHL, 0BCS_PRGRP, 0BCS_REFPER, 0BCS_REFYR, 0BCS_SEQNM, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0CS_COIAC, 0CS_COINR, 0CS_PLEVEL, 0CURRENCY, 0DATE, 0UNIT, 0USERNAME
Compounding -
When you define the compounding of an InfoObject, some compound relationships are not supported:
You cannot compound subassignments to consolidation units.
You are not permitted to compound the document type and the (0CS_PLEVEL) posting level.
You cannot compound noncurrent assets and assets/liabilities to 0BCS_ALTYPE. In addition, you cannot compound to a characteristic from the totals cube, with the exception of consolidation units, partners, and so on, and their higher-level characteristics.
ODS objects / Virtual InfoProvider -
You can generate the ODS objects for additional financial data and the virtual InfoProvider from the data basis maintenance. However, you can also create these manually and enter them in the data basis. If you do this, create the ODS objects and virtual InfoProvider with the same characteristics and structure they would have had if generated by the data basis maintenance. You can only deviate very slightly from this.
You are not permitted to include the following InfoObjects in any InfoProvider, unless they are generated by the data basis automatically:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY
The following InfoObjects must not be contained in the InfoObject catalog, which is defined in the data basis:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY, 0FISCYEAR, 0FISCPER3
Time characteristics -
SAP consolidation SEM-BCS ignores changes with the 0FISCPER, 0FISCPER3, 0FISCVARNT and 0FISCYEAR time characteristics. If you make changes, for instance, if you create hierarchies or attributes, these are not taken into account by SEM-BCS. Therefore, there is no maintenance in the workbench, you cannot use the hierarchies or attributes in the functions of SEM-BCS for selections and so on, and you cannot use the attributes or hierarchies for selections in BW queries.
Characteristic values
The following InfoObjects may have the values set by default by SAP only . You are not permitted to change them, not even by using the BW master data maintenance:
0BCS_AREA, 0BCS_AUTODL, 0BCS_COISRT, 0BCS_CTFLG, 0BCS_DIDIEL, 0BCS_GWMEM, 0BCS_GWPROC, 0BCS_IPAAC, 0BCS_IPATTY, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_REPMOD, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0BCS_TIMMOD, 0CS_COIAC, 0CS_PLEVEL
For these InfoObjects you can only use the tools of the master data service of the Financial Basis to synchronize master data, so the master data is transferred by the SEM-BCS tables to the BI tables, but not the other way round.
Predefined InfoObjects for individual roles
The system automatically uses most of the InfoObjects mentioned here to activate certain data streams. However, there also are some InfoObjects that you must manually enter in the cube for the totals records. Subsequently, you must assign certain roles to these InfoObjects. These roles are allowed for these InfoObjects only, you cannot assign these roles to other InfoObjects.
These are:
0CS_PLEVEL for the posting level role (required)
0BCS_CTFLG for the conversion role (optional)
0BCS_PRGRP for the product group role (optional)
Activate characteristics and key figures from BW Content
Before you create a data basis of SAP consolidation, you have to activate certain InfoObjects from BW Content.
1. You must always activate the following: 0CS_PLEVEL, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR.
2. If you use documents, you must also activate: 0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR
3. If you use the virtual InfoProvider, activate: 0BCS_REFPER, 0BCS_REFYR, 0BCS_REPMOD, 0BCS_TIMMOD also
4. If you use any data stream in addition to the totals records, also activate: 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8
5. If you use the data streams of the consolidation of investments, activate: 0ACQ_PER, 0ACQ_YEAR, 00BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COISRT, 0BCS_COITOA, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWMEM, 0BCS_GWNEG, 0BCS_GWOFFS, 0BCS_GWPROC, 0BCS_GWRED, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_SEQNUM, 0CS_COIAC, 0CS_COINR
6. If you use organization changes, activate: 0BCS_ORGCH, 0BCS_ORGCHL
7. If you use data streams for stock and delivery data, activate 0BCS_PRGRP.
8. If you use data streams for assets/liabilities or noncurrent assets, activate: 0BCS_ALTYPE, 0BCS_DPER, 0BCS_DYEAR, 0BCS_IPADAU, 0BCS_IPALCM, 0BCS_IPATTY, 0BCS_RETBG
The list of the InfoObjects varies depending on the release. Of course, you do not have to activate InfoObjects that do not exist in your release.
You do not have to activate InfoObjects that are not explicitly specified. However, if you do not activate them, some functions may not be available to you. For example, if you do not activate the 0BCS_CTFLG InfoObject and do not use it for totals records in the InfoCube, the currency translation cannot display any currency translation differences on the initializing data records.
Attributes When you define the InfoObjects in BW, attributes can be assigned to InfoObjects. This results in the following restrictions:
In SEM-BCS 3.1B, 3.2 and 3.5, no InfoObjects that appear in the permanent parameters of a consolidation area or are fixed in a consolidation area may be attributes of an InfoObject used in SEM-BCS.
InfoObjects that are used as a consolidation unit must not have 0FISCVARNT as an attribute.
Note 727776 - Requirements of SEM-BCS for data model
Hope it Helps
Chetan
@CP..
Eugene Khusainov
Re: BCS - Modelling requirements
Posted: Feb 24, 2007 10:56 PM in response to: moini kembly Reply E-mail this post
Hi,
On this phase you should determine and describe the following:
- sources of data to be consolidated (R/3, flat files, 3rd parties)
- methods of receiving/uploading these data into BW
- the appropriate BW objects (characteristics, key figures, cubes etc.)
- time characteristics to be used (is it enough to have only fiscal chars? do you need the calendar ones too?)
- is data upload to be directly into totals cube? if not - consider the intermediate cube. What kind of data transformation is to be done during upload of data from interim cube to the totals?
- methods of getting data into totals cube (flexible upload, reading from datastream, manual entries)
- will you need additional financial data? if yes, which ones and how will you load this data?
- what types of data you need to consolidate (actual, plan, forecast etc.)
- how many chars will be given the VERSION role?
- plan the number of consolidation areas. The best way is to have the only one. it will minimize the customization.
- how many consolidation units hierarchies do you have (for example, if you need consolidated reports according to management and IFRS structure of the group, then you have 2 hierarchies)?
- determine the structure of the group hierarchies.
- what is the group's currency? is it one currency or several ones?
- determine the currency translation methods for each data type.
- make sure that all consolidation units have the same chart of accounts. if not, consider the mapping or transformation of the numbering of accounts.
- consider the currency translation types for different groups of accounts in the balanse sheet (for example, fixed assets and equity - historical rate, retairned earnings - everage rate, non-monetary items - current rate etc.).
- consider the kind of translation - periodic/cumulative for different data types and reports.
- determine the set of consolidated reports as an output.
- which custom characteristics you need to bring to the totals cube in order to get the reports needed?
- which standard chars you'll have to customize and how exactly (bringing new attributes, customizing the std or creating the custom chars)
- if you'll replace a standard char with a custom one, consider that some another chars may depend on the char to be replaced. it's especially true for a company code. if you use a custom char for a company, then you have to use the reference chars for partner company, investee company, allocation company etc.
- will your consolidation units be one-dimension structure (by company) or it is a matrix one? if the latter, what is the second cons unit?
- will the BCS functionality cover all your consolidation needs? if not, consider the workarounds. reclassification is to be considered as a tool # 1.
It's just an incomplete introduction to the issues to be determined during a blue-print phase.
Re: BCS in NW2004s
Re: BCS - Data modelling KF question
Re: BCS - Virtual Cube Query error
Re: BCS- data basis
Re: BCS - Virtual Cube problem
Re: BCS - Consolidation group data
check these links...
http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Re: Synchronize Master Data between BCS and BW within the same SEM system
/message/1508507#1508507 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-sem/dataflow-from-r3-to-sem-bcs-950671
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169 [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9057475ca611d4b2e30050dadfb23f/frameset.htm
Hareesh

SEM-BCS: Merger

Hello Experts,
I have this scenario below:
Two companies will be merging as one company. Both of these companies falls under the same consolidation group.
We plan to use vertical or horizontal merger. However, its not found in the set of COI activity in SEM-BCS.
Is it available in SEM-BCS?
If so, please help provide helpful documentation.
Thank you so much in advance for the big help.
Regards,
Krezel

hi Krezelmina Adjad,
See the following links first:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cfa4ba90-0201-0010-6480-ea9498dcfceb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/98c4d590-0201-0010-e480-eca9942ffede
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/51ae9d90-0201-0010-92b9-82ef8e5458e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9
BASICS OF BCS:
Basics of BCS modelling -
Key figures -
You are generally not permitted to change any properties of the key figures used in SEM-BCS. The only exceptions to this are options that affect the display in Business Explorer and the "Characteristic is document property" setting.
If you want to use your own InfoObjects as key figures for totals records in the InfoCube, consider the following conditions:
1. SEM-BCS supports four roles for key figures in the data stream for totals records: Value in group currency, value in local currency, in transaction currency and quantity. You can assign a maximum of four key figures in the data basis accordingly. If you include additional key figures in the InfoCube, these cannot be processed in the consolidation. You are not permitted to assign other roles, such as 'subassignment,' to key figures either.
2. In SEM-BCS, the values are always stored periodically in the database. Furthermore, year-to-date values or non-cumulative values are not managed separately but result from cumulation in each case over the periods of the current fiscal year up to the current period. (This is a purely technical restriction. The consolidation functions greatly support the process with year-to-date values.) Therefore, you must define InfoObjects as cumulative values. Proceed according to the 0CS_TRN_GC, 0CS_TRN_LC, 0CS_TRN_TC, 0QUANTITY InfoObjects that are delivered.
3. You cannot use referencing key figures in SEM-BCS. If you want to define a key figure with a reference, to transfer the technical properties of the referenced InfoObject identically, you can simply create this with a template instead. However, if you want to use the special BW function linked with referencing key figures (see the online documentation in the BW), enter the referencing key figures in the InfoCube, but assign the referenced key figures to the data basis.
Characteristics
With the following characteristics, you are not permitted to make changes to the properties. Once again, the only exceptions here are the options that affect the display in Business Explorer:
0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR, 0BCS_AREA, 0BCS_AUTODL, 0BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COITOA, 0BCS_CTFLG, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWNEG, 0BCS_GWPROC, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_ORGCH, 0BCS_ORGCHL, 0BCS_PRGRP, 0BCS_REFPER, 0BCS_REFYR, 0BCS_SEQNM, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0CS_COIAC, 0CS_COINR, 0CS_PLEVEL, 0CURRENCY, 0DATE, 0UNIT, 0USERNAME
Compounding -
When you define the compounding of an InfoObject, some compound relationships are not supported:
You cannot compound subassignments to consolidation units.
You are not permitted to compound the document type and the (0CS_PLEVEL) posting level.
You cannot compound noncurrent assets and assets/liabilities to 0BCS_ALTYPE. In addition, you cannot compound to a characteristic from the totals cube, with the exception of consolidation units, partners, and so on, and their higher-level characteristics.
ODS objects / Virtual InfoProvider -
You can generate the ODS objects for additional financial data and the virtual InfoProvider from the data basis maintenance. However, you can also create these manually and enter them in the data basis. If you do this, create the ODS objects and virtual InfoProvider with the same characteristics and structure they would have had if generated by the data basis maintenance. You can only deviate very slightly from this.
You are not permitted to include the following InfoObjects in any InfoProvider, unless they are generated by the data basis automatically:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY
The following InfoObjects must not be contained in the InfoObject catalog, which is defined in the data basis:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY, 0FISCYEAR, 0FISCPER3
Time characteristics -
SAP consolidation SEM-BCS ignores changes with the 0FISCPER, 0FISCPER3, 0FISCVARNT and 0FISCYEAR time characteristics. If you make changes, for instance, if you create hierarchies or attributes, these are not taken into account by SEM-BCS. Therefore, there is no maintenance in the workbench, you cannot use the hierarchies or attributes in the functions of SEM-BCS for selections and so on, and you cannot use the attributes or hierarchies for selections in BW queries.
Characteristic values
The following InfoObjects may have the values set by default by SAP only . You are not permitted to change them, not even by using the BW master data maintenance:
0BCS_AREA, 0BCS_AUTODL, 0BCS_COISRT, 0BCS_CTFLG, 0BCS_DIDIEL, 0BCS_GWMEM, 0BCS_GWPROC, 0BCS_IPAAC, 0BCS_IPATTY, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_REPMOD, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0BCS_TIMMOD, 0CS_COIAC, 0CS_PLEVEL
For these InfoObjects you can only use the tools of the master data service of the Financial Basis to synchronize master data, so the master data is transferred by the SEM-BCS tables to the BI tables, but not the other way round.
Predefined InfoObjects for individual roles
The system automatically uses most of the InfoObjects mentioned here to activate certain data streams. However, there also are some InfoObjects that you must manually enter in the cube for the totals records. Subsequently, you must assign certain roles to these InfoObjects. These roles are allowed for these InfoObjects only, you cannot assign these roles to other InfoObjects.
These are:
0CS_PLEVEL for the posting level role (required)
0BCS_CTFLG for the conversion role (optional)
0BCS_PRGRP for the product group role (optional)
Activate characteristics and key figures from BW Content
Before you create a data basis of SAP consolidation, you have to activate certain InfoObjects from BW Content.
1. You must always activate the following: 0CS_PLEVEL, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR.
2. If you use documents, you must also activate: 0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR
3. If you use the virtual InfoProvider, activate: 0BCS_REFPER, 0BCS_REFYR, 0BCS_REPMOD, 0BCS_TIMMOD also
4. If you use any data stream in addition to the totals records, also activate: 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8
5. If you use the data streams of the consolidation of investments, activate: 0ACQ_PER, 0ACQ_YEAR, 00BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COISRT, 0BCS_COITOA, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWMEM, 0BCS_GWNEG, 0BCS_GWOFFS, 0BCS_GWPROC, 0BCS_GWRED, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_SEQNUM, 0CS_COIAC, 0CS_COINR
6. If you use organization changes, activate: 0BCS_ORGCH, 0BCS_ORGCHL
7. If you use data streams for stock and delivery data, activate 0BCS_PRGRP.
8. If you use data streams for assets/liabilities or noncurrent assets, activate: 0BCS_ALTYPE, 0BCS_DPER, 0BCS_DYEAR, 0BCS_IPADAU, 0BCS_IPALCM, 0BCS_IPATTY, 0BCS_RETBG
The list of the InfoObjects varies depending on the release. Of course, you do not have to activate InfoObjects that do not exist in your release.
You do not have to activate InfoObjects that are not explicitly specified. However, if you do not activate them, some functions may not be available to you. For example, if you do not activate the 0BCS_CTFLG InfoObject and do not use it for totals records in the InfoCube, the currency translation cannot display any currency translation differences on the initializing data records.
Attributes When you define the InfoObjects in BW, attributes can be assigned to InfoObjects. This results in the following restrictions:
In SEM-BCS 3.1B, 3.2 and 3.5, no InfoObjects that appear in the permanent parameters of a consolidation area or are fixed in a consolidation area may be attributes of an InfoObject used in SEM-BCS.
InfoObjects that are used as a consolidation unit must not have 0FISCVARNT as an attribute.
Note 727776 - Requirements of SEM-BCS for data model.
check these links also:
http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Re: Synchronize Master Data between BCS and BW within the same SEM system
/message/1508507#1508507 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-sem/dataflow-from-r3-to-sem-bcs-950671
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169 [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9057475ca611d4b2e30050dadfb23f/frameset.htm

Concept of Integrated Consolidation Unit of SEM BCS

HI Experts,
I'm now in the SEM BCS 4.0 and BW 3.5 implementation. Previously I was the ECCS specialist and before the FI and AM specialist.
Now I'm in SEM BCS implementation.
I have one question in connection to the integrated consolidation unit. As the reference, I take the concept of this using the ECCS.
As you might know, the creation of integrated consolidation unit for using realtime update method in ECCS, is pulled from FI company ID.
Meanings if I set the configuration properly, I can pull out the company master data as the consolidation unit master data in consolidation monitor.
Now, in SEM BCS, I want to do the same thing. I mean, off course I can create company ID in R/3 and then create the consolidation unit manually using UCWB. But this scenario can create inconsistency, and I also think this is not the right concept of doing integration between R/3 and SEM BCS.
My question is : what is the concept of this master data integration, and what is the proper way to do it?
Any advise on this question is highly appreciated.
Thank you in advance.
regards,
Halim

Hi Halim,
You need to build properly your data basis in data model.
Assign your company to a consolidation unit role:
http://help.sap.com/saphelp_sem350bw/helpdata/en/dd/f3783bcfef4a2de10000000a114084/frameset.htm
I sent to you the file concerning BCS that you asked for in another thread.
Best regards,
Eugene

SEM BCS - Consolidation Chart of Accounts

Hi all,
For the SEM-BCS implementation I am using ECC as the operational system. ECC folks are in the process of building a group chart of account in FI.
Can you suggests the work around to map group chart of account to consolidation chart of account in SEM-BCS?
Thanks in advance
RJ

I am not sure if anybody has replied you.
In SEM 4.0, You need to download the chart from R3 and then upload as hierrachy in the UCWB workbench.
In SEM.6.0, You have master data load direct from R3 and you can do the same.
Functional advice:-
Normally R3 creates operational chart of account in R3. Each account has a group account feild, if populated the mapping of operational chart to group is amintained in R3 itself.
You can upload the GL master with group chart account number and then this will obviously have the mapping for your use in BCS.
Consolidation chart of account in R3 (if its the accepted group chart) will be the same group chart which your ECC guys are preparing.
Are they using ECCS in R3??
Rgds
Samir Neji

SAP BPC Consolidations vs SEM-BCS

Hi all,
Has anyone compared the features/functionalities of SAP BPC Consolidation with SEM-BCS consolidation? What are the advantages of BPC Consolidation over SEM-BCS, and vice-versa? For a brand new implementation, what is the preferred tool?
Thanks,
Sujoy Banerjee

Hi Sujoy,
In general if you are starting out with a new implementation, BPC is the recommended solution for several reasons:
1) It's a unified solution offering both Consolidations and Planning
2) It's designed to be owned and managed by business users, not IT
3) It's integrated with the Enterprise Performance Management for Finance suite, which also includes profitability and strategy management
If however you need support for complex consolidation scenarios, such as legal consolidations, you may want to consider BCS.
You should be able to find several documents comparing the two solutions if you go the Support Center (https://websmp104.sap-ag.de/support) and do a document search on BPC vs. BCS.
Hope this helps.
Chris Clay

SEM-BCS how to make Consolidation Unit with Business Area

Hi all,
I am newbie in SEM-BCS and implementing BW-based BCS. Our situation is as follows.
Situation
- we have 7 companies worldwide and 4 different Business areas.
   Every company consists of at least two business areas in R/3.
- we have sales transaction in FI among companies.
requirement
- we need consolidated F/S in whole consolidation group and consolidated F/S in Business area level.
actually, we are planning to make the consolidation unit in company level.
Do we have to break down consolidation unit in business area? or just breakdown category solves our requirement?
If we have sales transaction even between business areas within certain company, do we have to make it in business area?

Following are the answer to your questions
Q:   What to do for using this cube in BCS?
A:    Add the business area to the cube. Generate the data basis and the business area gets added to all ODS/DSO , virtual cube.
Suggestion: To avoid deleting the Profit center cube, since you can reduce the complication.
Q:   Is it the problem about DATA BASIS Role?
A:   No. Assign the role of subassignment or consolidation unit as needed. If you are giving the role of consolidation unit to business area, you need to insert the char Partner business area also in the cube.
Q:   Is there some materials to solve this situation?
A:   Refer the matrix consolidation material in help.sap.com from BCS portion. As per SAP literature any relevant object can be made as second consolidation unit such as business area, functional area etc. Dont fear. Once you start it the issue will be resolved in few days.
Expected complication:
If you are going to make business area as subassignment then it is simple. But if you are making business area as Consolidation unit, go for partner business area in cube.
Ensure with your BI consultant that all BCS messages are addressed in BI infoobject for business area specifically.
Things can get complicated only if we allow for it get complicated. But you are doing great.. Keep posted.. Good luck.!!!..

Preparation for Consolidation in SEM-BCS.

Hello All,
Im implementing SEM - BCS (BW-based). I have the following versions:
- R/3: SAP ECC 6.0
- BW: 7.0
- SEM: 6.0
What do I have to customize in R/3 in order to extract the correct data to BW?
Do I have to do all the customization in transaction SPRO (Enterprise Controlling -> Integration: Preparation for Consolidation)?
I know that I have to create the companies and assign them to the company codes. I also have to create group chart of accounts and assign it to the transactional chart of accounts.
Can I do this in the account master data or do I have to have a Financial Statement Version for the Group?
Is it necessary to maintain Transaction Types for Consolidation?
Do I have to customize the Consolidation Staging Ledger and extract the data from here to BW?
I think I have to customize all this, but because all this transactions are in EC-CS customizing and I want to implement SEM - BCS (in BW), Im not sure if this is the right path.
Can anyone help me?
Regards,
Helena

Helena Coelho wrote:Helena Coelho wrote:Helena Coelho wrote:Helena Coelho wrote:
GANSHA,
what you are telling me is:
- I don´t have to do the customization in ECC. The only thing I have to do is, identify the tables and extract the data I need to BW.
But this way, how does the system know, which postings are from group companies or not?
The company code in R/3 is equivalent to company (consolidation unit role) in BCS. The Group companies are created in BCS and the companies in BCS are under those group companies.
If I were you, I would check whether Fiscal Year Variant is same across all company codes in R/3. I would also check whether parallel currencies are activated or not. Non-activation of parallel currency is not issue, but I will try to understand what are all the currencies involved and the currency translation flow.
I have created the companies in ECC in order to fill the "Trading Partner" field in the master data ( vendor, customer and G/L accounts) and to use on FI postings.
Yes, you have taken the right steps.
I have created the transaction types in ECC in order to use them on FI postings.
None of this is necessary? I dont have all the company codes in SAP, some of the data will be uploaded to BW by file.
The transaction types in ECC are different from the transaction types (also known as Movement Types) in BCS. You will continue to maintain the FI transaction types.
Regarding the chart of accounts, I dont have a group chart of accounts. For what I understand theres two ways:
- creating a group chart of accounts in ECC and in BW will be available as part of the GL account master data
or
- creating Financial statement items for consolidation in ECC, Build a Financial Statement Version for the Group (linking the operational chart of accounts to the consolidation items).
I think, this is the only way for me to use the consolidation staging ledger (totals table GLT3)? Or am I wrong?
What you are telling me is that I dont have to do this in ECC, but in BCS customizing?
Im confused ... please help me!!!
Helena
In your ECC, whether GLT3 table is activated? In many clients' companies, GLT3 table is not activated. The GL totals data is available in BSEG table.
If you do not have Group COA/ Group GL accounts maintained now, there are many ways to get GL totals data with Group GL level info added. You have already mentioned the steps.
One more method is create a custom mapping table of Operational GL accounts with Group GL accounts outside R/3 (to be maintained as part of BW) and make your R/3 GL totals data to flow thru this table, so that the final data in BW is available in both operational GL accounts and Group GL accounts. Developers will be able to help you.
Edited by: GANSHA on Jan 11, 2008 8:39 AM

How to prepare FI-GL for Consolidation in SEM BCS

Hello together,
can somebody tell me in a few steps how to activate the FI-GL (0FI_GL_6) that it can be used for consolidation in SEM BCS. My problem is that FI_GL_6 (and also FIGL_C10 for new FI-GL) have not all required fields for consolidation in SEM BCS, especially movement type is missing.
I know how to use the BCS data collection functionality "load of data stream" and I also know how to activate the BI Content for FI (and how to connect the data basis from BCS with the "FI Cube" via source data basis).
But how can I prepare the FI Cube (DataSource, InfoSource) that it concludes all neccessary informations?
Thanks for support.

we consolidate on the BSEG tables for actuals and GLPCP for plan data, it all depends on your business requirements, if you feel that the details out of GL_6 is insufficient find out the tables that bring the needed information and build a custom data source, but my guess is that the content datasrc's should solve the issue in most cases.

Difference SEM-BCS and BO PLanning & Consolidation

Hi all,
as announced in the subject. I was wondering what the difference between SEM-BCS and BO Planning & Consolidation is(so referring to the consolidation part)?
Is BO Planning & Consolidation = BO Planning + SEM BCS
Looking forward to your ideas!
Best regards
Hagen

Hi Collet,
Sorry I have no time to make a full-fledged comparison SEM-BCS and SAP BPC as you asked.
Regarding your last link: very interesting information. Thank you very much.
The citation from the article:
Known Limitations
In SAP BusinessObjects Planning and Consolidation (BPC), organizations (i.e. entities and groups/consolidation scopes) car vary according to Category and Time. However, all the other dimensions are static, which means they have neither category nor time dependency. As a result, the model presented here will use static Profit Center and Intercompany Profit Center dimensions.
Eliminations (so called Automatic Adjustments in BPC) are primarily driven by Legal Entity and Intercompany dimensions. As a result, when it comes to Matrix Consolidation, each elimination will still occur based on this fact. So, basically, an elimination is triggered if both an Entity and the Intercompany entity are being consolidated under the same node (i.e. Group or Consolidation scope). In other words, BPC does not evaluate as such the Profit Center and Intercompany Profit Center dimensions when it comes to performing eliminations. Amounts will be eliminated based on the Legal Entity view. However, it is possible to analyze and group eliminations by Profit Center later on. As a result, Matrix consolidation will heavily leverage the reporting/filtering capabilities of the product.
I'm afraid that in SEM-BCS' sense the Matrix consolidation has much more deep meaning than that presented here.

SEM BCS - Error in Consolidation Area

Dear Experts,
When i save my consolidation area, there is an error message.
it is "Syntax error in GP_ERR_UCDTYPE, row 8.880".
The Diagnosis said "Component called REFYEAR already exists".
I can not found "REFYEAR" in my system.
I am using info cube 0BCS_C11.
Please help....
Thanks in advance.

Hello
Though I am not an expert in this area I have found the following information with a similar problem in another customer that maybe useful:
"On the basis of your problem description it seems that you assigned in
the data basis maintenance the `SEM-BCS info-object catalogue` for
characteristics and key figures to the two info-object catalogues (on
the first tab strip of data basis maintenance). This makes the trouble.
Please read the F1 help carefully and if you need an extra info-object
catalogue, then please create one. Please note that the SEM-BCS standard
info-object catalogues are NOT appropriate for this purpose.
F1 help:
"InfoObject Catalog for Characteristics
InfoObject catalog of the SAP Business Information Warehouse to include
additional characteristics.
Use
You use this field as follows:
In a data basis, the InfoObject catalog contains the quantity of
additional fields that can be selected on the Additional Financial Data
tab page for investments and equity.
In a source data basis, the InfoObject catalog portrays the definition
of an external field catalog, which can be used in a method of the
category Flexible Upload, if a data basis was allocated to the source
data basis."
In order to remove the info-object catalogs you can use the transaction
UCWB01.
Hope it helps .
Regards
Javier

SEM BCS - Partnership Consolidation

Hi friends:
Please let me know the following:
a) What is a Partnership consolidation and which version covers it?
b) What are new features in SEM 6.0 and where do I get documentation?
I thank you in advance for the above information.
Sincerely,
Virgo

Virgo,
IMHO, it should mean the multilevel ownership between the companies involved.
In this context I treat the partnership as a different share belonged to this or that party.
Like: Company A has 80% of Company B which in turn has 90% of Company D etc.
There is no special functionality needed. SEM-BCS covers purchase and equity methods.
That is all is needed here, I guess.
Hope this helps.

SEM BCS(Business Consolidation)

Hi Friends,
I am wroking BW.But now i need to work on SEM BCS.I am very new to SEM. Plz can any one provide me some meterial on SEM BCS.
Thanks

Hi,
please take a look at this site: http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000688351&.
About BCS transactions I found this thread: https://forums.sdn.sap.com/click.jspa?searchID=329906&messageID=549616.
Some more useful links....
http://help.sap.com/saphelp_sem320bcs/helpdata/de/a6/ece73c2d1011d299250000e8a5999a/frameset.htm
http://www.sapprofessionals.org/?q=sem_bcs_key_design_considerations_for_integration_points
http://sapnewbie.blogspot.com/2006/03/sap-sem-bcs.html
http://www.pragmatek.com/news/BW%20Reprint%20Jun%202004.pdf
Follow this link.
https://websmp103.sap-ag.de/sem
you have to go TO
media library -> presentations -> SEM-BCS. Here u can find the relative document.
Hope this helps
Happy Life,
Aravind

Consolidation SEM BCS Vs EC CS

Similar Messages

Maybe you are looking for