Constant -54 error message,nothing works.

I've been having a problem with my phones and my laptop.
I've tried restoring iTunes, fixing iTunes, reinstalling, nothing works.
I have a constant -54 error, it doesn't want to sync my music, it erases all my music, every time I try to add an item it freaks out says cannot syn -54 error.
unknown error.
NOTHING WORKS.
how do I fix this? It's getting to the point where I just want to burn this phone and go Samsung, and I LOATH Samsung. Help.

Schedule a check disk by right clicking on your c drive, click properties, click on check now. Let the system reboot and do the check disk. Run a full anti-virus scan from safe mode if that doesn't work.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Similar Messages

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

Constant 404 error message - cannot install my product (premiere pro)

I've just purchase the single product - adobe premiere pro.
I have received the confirmation email, verified my address.
When i click on get started - I get a constant 404 error message. Sometimes the adobe.com/en flashes up for a few seconds, then the 404 comes back again.
Other way in
I login to adobe.com sucessfully.
I cannot see anywhere in account/profile/comms etc for me to download Premiere. It just tells me I have purchased it.
But after a while the same 404 error pops up.
I'm using Chrome/Yosemite
I am not running any malware/spyware removal progs.
Nor am I running sophos or other anti-virus software.
Hugely frustrating..
Any help massively appreciated
Cath

Cath I would recommend you utilize a different web browser to download and install the Creative Cloud Desktop application. You can find additional details regarding the installation process at Creative Cloud Help | Download, install, update, or uninstall apps. If you have any questions regarding the process you are welcome to update this discussion.

Itunes Wont Start At All No Error Messages Nothing HELP ME!!!!!!!!!!!!!!!

My Itunes Wont Work At All No Error Message Comes Up NOTHING ive Uninstalled , Deleted the Files in c Drive and Re Installed it Over and Over Again Quicktime Works Fine But When i Open Quicktime My Itunes is on there :S its very Confusing But i still cant Sync music Onto my Ipod or Buy Any Music Please Help Me!!!!!!!

Does iTunes.exe persist in the task manager or disappear again quickly. This can be a clue to the cause of the problem.
If iTunes persists this points to either firewall blocking or a damaged configuration file.
Try briefly turning off your firewall to see if iTunes will launch. Otherwise the link I will give at the end tells you how to delete the configuration file.
If iTunes doesn't appear or appears briefly and then disappears this may be a digital signing issue, also dealt with in the link.
It is a good idea to scan your PC for viruses and spyware, as malware can cause problems.
Apple article on troubelshooting launch problems:
XP version
http://docs.info.apple.com/article.html?artnum=302856
Vista version
http://docs.info.apple.com/article.html?artnum=305491
If the things I suggested above don't wiork, try working through the whole article.
All this is on the assumption that your Quicktime is working normally. I am a bit worried that you have been installing and uninstalling different versions, it just complicates the issue.

ITunes 7 flat-out will not open - NO error message, nothing

Same thing happened when I downloaded, I mean, was FORCED to download version 6. I had no desire to upgrade to 7 but I had to to download an album, now I click on the iTunes icon and nothing happens. I've seen similar discussions to this but they all involve error messages of some kind. I get nothing, don't know if that means my problem is different or not...I know I'm getting a little fed up with these coerced upgrades that then turn out not working.

now I click on the iTunes icon and nothing happens. I've seen similar discussions to this but they all involve error messages of some kind. I get nothing
a few preliminary questions, aimed at narrowing in on possible culprits.
(1) do you have Norton Internet Security 2005 installed on that PC?
(2) try opening your QuickTime for us. does it:
(a) launch perfectly fine?
(b) refuse to launch, with an error message? (if so, please tell us what it says.)
(c) exhibit some kind of peculiar behavior? (if so, please describe the peculiar behavior for us.)
(3) reboot the PC. launch your Task Manager, and click on the Processes tab. try launching itunes again.
does an itunes.exe show up in your Processes tab? if so, does it persist in there or does it disappear after a few seconds?

SAVE_TEXT for long error Message not working.

Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline   = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT   = 'DOKU'.
Header-TDNAME     = 'ZFQM093'.
Header-TDID       = 'NA'.
Header-TDSPRAS    = 'EN'.
Header-TDFORM     = 'S_DOCU_SHOW'.
Header-TDSTYLE    = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
     CLIENT                = SY-MANDT
      header                = header
     INSERT                = 'X'
tables
      lines                 = t_lines
   EXCEPTIONS
     ID                    = 1
     LANGUAGE              = 2
     NAME                  = 3
     OBJECT                = 4
     OTHERS                = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
   OBJECT                = 'DOKU'
   NAME                  = 'ZFQM093'
   ID                    = 'NA'
   LANGUAGE              = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C'    'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT       = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
Akash

Hi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
                   and we have to manually save it, but i want to save the text automaticaly
                   all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash

Error message when working on one pre-recorded track

Hello! I'm using GB 5.1, and have been encountering a frustrating problem:
I have one mp3 audio track (of a group discussion) imported from a digital recorder. I've processed this kind of file many times, as a Real Instrument track. Mostly I've had no problem. But with this track, after some editing, when I advance the playhead to a different place in the track, a loud click happens and the following text appears in a window:
Part of the project was not played.
This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
Moving the playhead to different places in the track brings the click and the same error message, except that sometimes the track will begin playing, only to have this repeat again. When I quit the project, delete it, import the raw mp3 again, and begin editing, sometimes it works, but sometimes, like now, the same problem occurs after just a few edits.
I don't understand the "too many real instrument tracks" error, because I'm using only one.
Any ideas?
Thanks!

The error message may be misleading. You may see this warning, when your Mac is running out of RAM. For example, when you have too many open applications that are RAM hogs, like Safari, iPhoto, iMovie, GarageBand, iTunes. Or when one of the applications you are running has a memory leak. Do you see any error messages in the Console window?
I'd recommend to reboot your Mac, before starting to work on your project - that will free any memory, that other applications may have been leaking; also close any application that you do not really need, while working on a music project.
How much RAM do you have, btw.? And how full is your harddrive? If this is running out of space, you may see similar warnings.
Regards
Léonie

IPod won't sync, no error message nothing freezes

I originally started with not being able to use iTunes 9 on my new windows 7 notebook. I reinstalled my os and before anything else I installed iTune 9. All went well, I loaded all my music, and even synced my iPod classic 80gb, then it went back to starting to sync but the it would stop syncing. iTunes shows that it is syncing and when I eject my iPod it warns me that it is still syncing but there is no file transfer and the iPod has the connected screen, but not the syncing screen. I have tried all of my usb ports rebooted all the usual to try to fix it. I can do a full 60 gb sync using sharepod, or media monkey, but not itunes. I think this pretty much points to an iTunes problem. Everything sees my iPod, windows, iTunes, sharepod, winamp, and media monkey. I have never gotten an error message thru all of this. Any ideas? How about you APPLE, got any suggestions?

Sorry about the delay, banderso. I've been brooding.
Something just showed up in another context ... is the hotfix from the following Microsoft document of any assistance with your issue?
[USB devices that are connected to a computer may not work after the computer is idle for more than one hour Windows 7 or in Windows Server 2008 R2|http://support.microsoft.com/kb/978258]

HT201210 Ios6 will not download I get an error message it worked fine on my iPad I have the iphone4

I cannot update my iPhone 4 ios6 I get an error message frustrated any help appreciated

dont do it!!! wait until apple has this all worked out! took forever for me to get my phone to restore. had to uninstall all antivirus software from pc andd turn off firewall. apparently something blocks itunes to where it cant restore your phone

Version 9 on PC. Share with Flickr - error message - "being worked on"

. It worked previously for several years. For the last 2 months, I get an error message, that it is unavailable and being worked on.

Hi,
If you are still having this problem, I'm afraid that it looks as though not much is happening to fix it. I raised a bug report on the feedback site only recently. Feel free to log in there and add your name to the count.
Elements share to Flickr not working
f you add to that thread, can you make sure you increment the count at the top please. At the top, just at the end of my first entry, there is a count saying "n People have this question" and there is a +1 button next to it - click on that button. The count should then increment and the message should change to "you have this question".
I think that the more people that add to the count, the better chance of a fix.
For what its worth, I can share to Flickr using Lightroom so they must know how to do it.
Brian

System Error Message CR082-Work center with ID 10000005 was not found

Hi SAP Gurus,
We are getting the error message 'Work center with ID 10000005 was not found' while our finance guys trying to do costing run for our two plants together. But when they run the costing for two plants seperately then it is working fine. Because of the business needs they have to do the costing run for both plants together.
"The description of the error is as follows:
System error: Work center with ID 10000005 was not found
Message no. CR082
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error"
Any idea how to solve this issue.
Thanks.
Sachin

Hi,
Kindly check with following SAP note for Message No. CR082 :
[Note 157682 - Message CR082: Work center not found|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=157682]
Try with implementing this note which may resolve your problem.
Hope this helps.
Regards,
Tejas

Disk Eject Error Message, Nothing Ejected.

On awakening from sleep I get the "disk not ejected properly" error message. Two disks, each 1.5 Tb, one for Time Machine remain connected, nothing else has been ejected. This has been persistant in Lion did not occur with Snow Leopard.

Yes I have done both. The problem only occurs after the iMac wakes from sleep. Though I didn't find the answer initally, after I posted I was directed to some similar questions and I think one had the answer. Turn off "put hard disks to sleep when possible" in System Prefs.
Thanks for following up.

Error 13019 - Nothing Works

Hi,
I have an iPhone 3GS (32GB) running iOS 4.1 on a Mac running OS-X 10.6.4 and iTunes 10.0.1 (22).
This error (The iPhone "James iPhone 3GS" cannot be synced. An unknown error occurred (13019)) happens every time I add new content to my phone. The only solution is to do a full restore which takes over 2 hours.
I have followed all the steps on the Apple support page (http://support.apple.com/kb/TS2830) and nothing fixes it. The best I can get is for it SOMETIMES to go, but then come back again. Just to clarify, I've been through every sync option in iTunes, turned it off, sync'd, turned it on again, this has never worked.
The problem has occurred when I've added new photos, added new videos or added new apps to the sync (all quite normal things). If there is nothing new to add, the sync works fine until I add something new and then it won't go away until I do a full restore.
When the error occurs, most of the sync seems to work OK (e.g. calendars, contacts etc...) but any new photos or videos will not appear on the phone or (in the case of videos) if they do appear they appear as unplayable content.
The videos in question are purchased content from the iTunes store. Photos are 800x600 versions of photos I've taken.
Can anyone help as I'm getting really fed up with this!
Thanks,
James

This was resolved in the original post (I was advised to re-post here).
Please see http://discussions.apple.com/message.jspa?messageID=12422207 for solution

Cannot print due to error message--printer working with Internet Explorer--How do I correct?

Last week printer worked fine with Firefox.
This week a message comes back "an error occurred while printing".
Printer works fine with Internet Explorer.

To test how Firefox runs "uncustomized" on your system, could you do a two-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Any time you want to switch profiles, exit Firefox and return to this dialog.
You'll click the Create Profile button. I recommend using the default location suggested (i.e., just ignore the option to choose a different folder). Then start Firefox in the new profile you created.
Can you print?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Photoshop creative suite 5.5; error message "stopped working"; twain install failed;

I am at the end of my rope, I am about ready to uninstall the whole thing and install Corel. With the latest update of Windows, my Photoshop stopped working. I tried to download and place the twain drivers that the directions told me to, but the download came with all kinds of "optional" plug ins and no directions on where to put them, do i put all of them in the Import/export folder, do i put only one in there, is so which one? I have windows 7 on an HP machine, I need my photoshop for obvious reasons. there are also hints to another file/folder like twain, but nothing about how to fix that either...

Hi everybody, we have the same problem. I work for university.We have to make a packeging for the Adobe CS4. I installed with administrator privilage, but the user for student isn't admin. Message came up when I opened programs... "Licensing for this product has stopped working: You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or adobe customer support for help."
The program for repackeging is Wise. I can put the admin privilage for adobe PCD and Macrovision Shared.
How can I do?
Thanks

Constant -54 error message,nothing works.

Similar Messages

Maybe you are looking for