Constant Audio Beeps From the Speaker
My OS X has an erratic behavior. When I go to any application's menu to select, everything in the menu to select get highlighted and it goes up and down with constant audio beeps from the studio speakers.
The console module state:
Mac OS X Version 10.4.10 (Build 8R218)
2007-07-18 18:52:43 -0500
2007-07-18 18:52:48.157 SystemUIServer[208] lang is:en
bit length overflow
code 7 bits 6->7
bit length overflow
code 5 bits 6->7
bit length overflow
code 4 bits 6->7
bit length overflow
code 4 bits 6->7
...and etc.
Jul 19 05:41:35 studio DirectoryService[79]: SafeOpen::Call to netinfo_open was with argument domain name: .. and lasted 3 seconds while timeout was 3
Is there a quick fix for this? Nothing from disk utility will fix it.
Any ideals because for some reason, I feel doomed?
Thanks,
Al
Hi DJ,
When Disk Utility can't do the job, call in the experts and get either DiskWarrior at http://www.alsoft.com/ or TechToolPro4 at http://www.micromat.com/
Carolyn
Similar Messages
-
Audigy 4 rear audio comes from front speake
Whenever I caolibrate my speakers they work fine. However, when I go into speaker settings all of the rear right audio comes from the front right and rear left comes from the front left. I'm using the analog outs on my sound card. I've uninstalled the drivers and disabled my onboard sound. I've uninstalled and reinstalled the card, reset the defaults in the console, and updated the drivers. The only peripheral I have hooked up is a Fellowes brand mouse. I checked the outs on the sound card itself and audio only comes out of the front out, the green jack. I've seen that some people have problems with the drivers not working because the sound card is not recognized, but my computer recognizes it as and Audigy 4.
Actually, this is the situation w/ Audigy 2 (6. card) too --> something strange w/ output channel mapping:
Speakers set to 6/6., CMSS OFF, 5.2.8.64 drivers. This PC has only GB or RAM.
With WDM, WDM/KS and Asio4All (uses WDM/KS functionality) drivers, output channels are mapped as:
/2 ==> Front L/R
3/4 ==> Front C/Sub L/R
5/6 ==> Rear L/R
7/8 ==> Front L/R
when expected would be
/2 ==> Front L/R,
3/4 ==> Rear L/R
5/6 ==> Front C/Sub L/R
(7/8 ==> Front L/R) ?
<i>With both Creative ASIO drivers channels are mapped as expected:
Front L/R = Front L/R
Rear L/R = Rear L/R
Front C/Sub L/R = Front C/Sub L/R
</i>
jutapaMessage Edited by jutapa on 08-24-2006 0:43 AM -
No audio output from the orange mini j
Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AMThe orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason -
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple devicemickyja wrote:
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
Micky,
The iTunes Store sells songs in AAC format. Most Android phones can play AACs. Just sync them to your phone per the instructions with the phone.
If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide:
iTunes: How to convert a song to a different file format - Apple Support
(This conversion does not require burning.)
For future reference, note that the iTunes Store is really optimized for people using Apple devices. You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music. -
I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off?
It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device. Who h has not helped.
HELP!!!!!!!- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
When I download audio books from the library I can't find them in my itunes files. All of the chapters do not transfer to my itouch even though they all were downloaded.
I finally figured it out! On the book page of itunes I went to preferences and then import settings and changed the settings from aac to mp3 and when I went back to the page there was my itouch and clicked on it and then books and there were all my books and files! deleted 3 chapters that were greyed out and transfered them again and it worked. Thank you for your help.
-
How can I create an audio CD from the audio only portion of my iMovie?
Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
Any help would be apprecaited.This is how:
Go to:
'File'
'Share'
'Quicktime'
'Expert Settings'
'Audio as AIFF' or pick your brand of compression.
Drag and drop the resulting file into iTunes.
Enjoy!
P.S. - You didn't need to delete the video but I think that'll be okay. -
What are the characteristics of the sound output from the speaker iPad3?
What are the characteristics of the sound output from the speaker iPad3?
man -s4 proc
or
http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
process whose procfs directory is being accessed.
tim -
Playing the audio file from the point of mark
Hi All, i want to play a audio file from the point of mark.
i have used mark() method to mark but when i play the audio it is still playing the audio from the starting point. please help me.Hi,
Question:
1. You have a folder for each DVD whose video contents you edited.
Answer: Yes
Question:
You talk about projects 34, 35, 36, 37. Are these projects associated with only one specific DVD?
What is supposed to be in each project - just edited VTS_01_1.VOB or edits from the others in the series
such as VTS_01_2.VOB, VTS_01_3.VOB, etc.
Answer:
Project 34 has edited Premiere Elements file 34 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#34
Project 35 has edited Premiere Elements file 35 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#35
Project 36 has edited Premiere Elements file 36 and the VOB files (VST_01_1.VOB, VTS_01_2.VOB, etc) from DVD#36
etc.
Question:
2. If you screen each DVD video file VOB for a given DVD disc, does the content follow sequentially and cleanly?
Answer:
Yes
When I run the VST_01_1.VOB, VTS_01_2.VOB, etc from each project the audio and the video are clean and match.
When I run the edited Premiere Elements file that were created after project 34 edited Premiere Elements file project 35, 36, 37 etc. I am getting the audio from project 34
When I run the edited Premiere Elements file that were created before project 34 edited Premiere Elements file project 1, 2, all the way to 33. I am getting the correct audio
Thanks,
Ron -
IMAC freezing, hang during startup, loud noise coming out from the speaker
I am using the iMAC i3 Intel based which i bought it just a month ago
Last week it hang, freeze just like that without me launch any application just yet
I hold the ON button for a restart, and it freeze during the startup
One more thing, sometimes when it freeze, there's a noise coming out from the speaker ( just like there is no signal from the TV )
Already sent it to the Apple Service Center but they tell me it is free from any error, but by the time i bring it back home, not even 12 hours, it freeze again just like that with loud noises coming out from the speaker.
Btw did i mention, sometimes there's also a screen distortion
Please somebody help meI've experienced similar symptoms to the original poster's description. I have an iMac 27" 2010 model. This may be related to the following:
I've looked on numerous forums regarding the freezing problem I was having. This problem would arise on a wide range of systems.
Symptoms included but were not all always present - usually when I am loading the system with games/heavy load processes:
- Full system freeze, screen still on.
- Loud cracking noise coming from speakers (relative to what volume was at when the freeze happened).
- Computer asleep but I cannot wake up unless hard reset with power button.
- My screen backlight was also damaged (permanently dimmed) near the left side, and progressively got worse over time. This was fixed (replaced LCD 27" display $600+ and covered by my creditcard extended warranty)
Basically, what I've come to realize which has not been well documented as far as I could find relating to this problem - is that the system is overheating and causing these freezing errors (and LCD damage in my case). Prologned occurances could result in different system part failures.
How do you fix the overheating problem? Give this a try, it's worked so far for me and I've actually been able to continue video/photo editing without having this annoying freeze.
Search for and download 'iStat Pro' (widget addon that lets you monitor your system temperatures... compare it before and after the fix)
Search for and download 'SMCFanControl (a great little app that allows you to change your system fan speeds) - I did not know this was possible, and have never heard the fans go this high when it was being run automatically by the system. The fan's are obviously louder when set to max, but is well worth the system cooling results. -
I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.
Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen -
How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?
How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?
Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR -
Does the EQ setting affect only audio played from the Music app?
Does the EQ setting in Settings -> Music affect only audio played from the Music app or does it also affect any other audio? Specifically, I'd like to know if the setting is applied to audio podcasts that are played from Downcast. Thanks!
--VVThey will only affect the Music app.
-
How to read an audio file from the disk and play it?
Do you know who to read an audio file from the hard disk and play it. It's for an application and not an applet. I tried with the Applet.newAudioClip(URL url) thing, but I keep getting a MalformedURLException.
And is there a way to get the path of the file you are using? Currently I'm doing this:
File file = new file("randomname");
string = file.getAbsolutePath();
file.delete();
I'm sure there's a better way. And this is not for an applet, just a normal app.Below is a class that should be of use to you.
package com.sound;
import java.io.File;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.Clip;
import javax.sound.sampled.DataLine;
public class SoundPlayer implements Runnable {
String filename;
public SoundPlayer(String filename){
this.filename = filename;
Thread t = new Thread(this);
t.start();
}//SoundPlayer constructor
public void run(){
playSound();
}//run method
public boolean playSound(){
try {
File file = new File(filename);
AudioInputStream stream = AudioSystem.getAudioInputStream(file);
AudioFormat format = stream.getFormat();
DataLine.Info info = new DataLine.Info(Clip.class, format);
Clip clip = (Clip)AudioSystem.getLine(info);
clip.open(stream);
clip.start();
while (clip.isRunning()) {
Thread.sleep(100);
clip.close();
catch (Exception e) {
System.err.println("Error in run in SoundPlayer");
return false;
return true;
}//playSound() method
}//Class SoundPlayer -
I have down loaded an audio book from the libraryand I cant play it
cant get an audio book from the "library" to load on Nano
It should be in the Music app - when there are audiobooks on your iPhone you should get an Audiobooks option under the More button at the bottom of the Music app.
Note that audiobooks are currently a one-time only download from the store, so you may want to copy it to your computer's iTunes via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) so that you can take a backup of it.
Maybe you are looking for
-
iam not able to insert data into datagrid corresponding to the column names..as iam inserting both data and column names programatically..ie iam not able to co relate the data with the column names.plzzz help me asap
-
ITunes Home Sharing not working in Windows 8 with Apple TV
My Home Sharing does not work on Apple TV 2 - I am running the latest version of itunes, apple tv software, all windows updates installed, all firewall ports required are open, anti-virus is allowing things through, I have reset and restarted my appl
-
Content not visible in Firefox
Hi! I use your awesome browser as my #1 browser. Since the most recent update, however, I can not see content on Facebook that was available (and works on all other browsers). Here is a link where you can see it working on all other broswers but not
-
How to move Mail to another drive
Hi all, mid 2011 MacMini, OS 10.8.5, 16GB RAM My applications and OS are on an SSD, and I have another internal drive for documents/data. Because speed is not an issue with mail, I would like to move the Mail folder onto another drive. I have moved t
-
Informix drivers appear to not work with some components. Please refer to: http://swforum.sun.com/jive/thread.jspa?threadID=46728