Constant crashes since updating - any help appreciated
since updating my 2009 2x2.26 GHz quad core Xeon to the latest operating system, I've been getting steady kernal panics whlie using safari or surfing the web. I suspect it might be one of my graphics cards, but ca'nt tell. if anybody can shed some light on this crash report that would be hugely apprecaited.
Interval Since Last Panic Report: 69243 sec
Panics Since Last Report: 1
Anonymous UUID: 8840CD4F-DEED-4A31-2ECC-7A4527F82D3C
Mon Dec 31 18:24:55 2012
panic(cpu 0 caller 0xffffff800dc51c07): "IOGMD: not wired for the IODMACommand"@/SourceCache/xnu/xnu-2050.18.24/iokit/Kernel/IOMemoryDescriptor.c pp:1424
Backtrace (CPU 0), Frame : Return Address
0xffffff80febf3500 : 0xffffff800d81d626
0xffffff80febf3570 : 0xffffff800dc51c07
0xffffff80febf3600 : 0xffffff800dc4c9de
0xffffff80febf36b0 : 0xffffff800dc4d60a
0xffffff80febf36d0 : 0xffffff7f8df76a44
0xffffff80febf3740 : 0xffffff7f8dfe0d85
0xffffff80febf3790 : 0xffffff7f8dfe0eaf
0xffffff80febf37e0 : 0xffffff7f8dfc6515
0xffffff80febf3860 : 0xffffff7f8dfc4815
0xffffff80febf38a0 : 0xffffff7f8dfb3083
0xffffff80febf3950 : 0xffffff7f8dfdd177
0xffffff80febf3b40 : 0xffffff7f8dfde1d8
0xffffff80febf3c10 : 0xffffff7f8ed2f419
0xffffff80febf3d50 : 0xffffff7f8ed2eefe
0xffffff80febf3d60 : 0xffffff7f8ed06cfb
0xffffff80febf3d70 : 0xffffff7f8ecdd580
0xffffff80febf3db0 : 0xffffff7f8ecdbdc2
0xffffff80febf3de0 : 0xffffff7f8ecdfeef
0xffffff80febf3e00 : 0xffffff7f8e9132a4
0xffffff80febf3e20 : 0xffffff7f8e913237
0xffffff80febf3e50 : 0xffffff7f8ecf78ac
0xffffff80febf3e80 : 0xffffff7f8ecdc506
0xffffff80febf3ed0 : 0xffffff7f8ecda4c7
0xffffff80febf3ef0 : 0xffffff800dc472a8
0xffffff80febf3f30 : 0xffffff800dc45daa
0xffffff80febf3f80 : 0xffffff800dc45ed9
0xffffff80febf3fb0 : 0xffffff800d8b26b7
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8df70 000->0xffffff7f8e272fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8dede000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8df5c000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8df19000
com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f8ecd6000 ->0xffffff7f8ed98fff
dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8df 70000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8df5c000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8dede000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8df19000
com.apple.iokit.IOSurface(86.0.3)[578CEAAD-1465-3B29-B34F-09586288ED88]@0xfffff f7f8e90f000->0xffffff7f8e920fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000d600000
Kernel text base: 0xffffff800d800000
System model name: MacPro4,1 (Mac-F221BEC8)
System uptime in nanoseconds: 1567714532292
last loaded kext at 42259523142: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8f452000, size 36864)
last unloaded kext at 191114077518: com.apple.driver.AppleIntel8254XEthernet 3.1.1b1 (addr 0xffffff7f8e9f6000, size 69632)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.GeForce 8.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleLPC 1.6.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.Intel82574L 2.3.0b4
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro4,1, BootROM MP41.0081.B07, 8 processors, Quad-Core Intel Xeon, 2.26 GHz, 8 GB, SMC 1.39f5
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 512 MB
Graphics: NVIDIA GeForce GT 120, NVIDIA GeForce GT 120, PCIe, 512 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553742465238432D47372020
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553742465238432D47372020
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553742465238432D47372020
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553742465238432D47372020
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-3
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: Hitachi HDE721010SLA330, 1 TB
Serial ATA Device: WDC WD6400AAKS-41H2B0, 640.14 GB
USB Device: EPSON Scanner, 0x04b8 (Seiko Epson Corp.), 0x011b, 0xfd100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 4
USB Device: hub_device, 0x0451 (Texas Instruments), 0x1446, 0x1a200000 / 2
USB Device: vendor_device, 0x091e (Garmin International), 0x0003, 0x1a210000 / 5
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x1a220000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0x1a222000 / 6
USB Device: PTZ-631W, 0x056a (WACOM Co., Ltd.), 0x00b5, 0x1a230000 / 3
FireWire Device: built-in_hub, 800mbit_speed
What kind of graphics card do you have?
Good question ;-) erm... if I remember correctly, it's a mobile x1400...
try enabling kms. that seems to resolve a lot of issues.
Last time I had that enabled, I got random freezes and graphical corruption during boot. I could try it again as I think there has been a kernel update since then...
Similar Messages
-
Constant crashing since update 10.8.4
Ever since I updated I get these crashes everyday. Every console report usually looks like this. Is it a bluetooth issue? 2008 MacPro.
Morning G201,
Thanks for using Apple Support Communities.
Now you may not be getting a gray screen but the steps listed in this stricle are useful.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
OS X: About kernel panics
http://support.apple.com/kb/ts3742
Best of luck,
Mario -
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start. -
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
EA Helper crashes since update to CC version
Hi,
since updating to the CC version of Edge Animate, i am no longer able to open an existing html file to work on it. I just get an alert saying "Adobe Edge Animate Helper EH kann aufgrund eines Problems nicht geöffnet werden."
This isn't true for all html files, just for some files. If necessary, i will send the files.
Regards
Holger PleusI am running MacOS 10.9.1 on a 2.8 Ghz Quad-Core Intel Xeon MacPro (Mid 2010).
Mit freundlichem Gruß
Holger Pleus
Am 18.02.2014 um 21:01 schrieb elainefinnell <[email protected]>:
Re: EA Helper crashes since update to CC version
created by elainefinnell in Edge Animate CC - View the full discussion
Hi, Holger-
Sorry for the delay, and thanks for the bump. I downloaded your file and opened it on my Mac OSX 10.8 machine running the latest version of Animate CC. It opened just fine and I was able to create an Animation based off of one of the text fields. What platform are you running on?
Thanks,
-Elaine
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6133244#6133244
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6133244#6133244
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6133244#6133244. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Animate CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
trying to update my hotmail password, and I get "Modifying Endpoint Failed" message. any help appreciated.
Thanks for the details, !!!!!!!!!!!!!!!! When using the Droid RAZR M and default email client, Hotmail passwords can be updated more efficiently by completely removing http://vz.to/1FgwQ3a readding http://vz.to/1FgwQ3m the email account. Here are the steps to do so . Please keep us posted on how this works.
TanishaS1_VZW
Follow us on Twitter @VZWSupport -
In "settings/general" the words SOFTWARE UPDATE don,t appear below ABOUT or anywhere under GENERAL to enable me to update to ios6 . Any help appreciated.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update. Only thing that shows on iPhone screen is music library. Home Sharing is on. Any help appreciated. Sorry if this is not exactly the right place to post this!
One clue: I have found a reliable way to solve the problem when it happens.
In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet. The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing. Remember, internet access (Trailers, Store, Netflix) have no issues. Purely Home Sharing.
Adam -
Premiere Pro random crashing since update to 2014.2
Been working on the SAME big project over 18 months, in Pr Pro CC, 2014, working on the SAME PC:
Win 7 SP1 pro 64bit, i7-3770K, 32GB fast memory (25.7 available for Pr), Intel HD 4000 graphics on Asus motherboard with 30" NEC Multisync screen at 2560 x 1600 (same as for years)
42GB free on my SSD drive C: and 54GB free on my SSD drive S: for preview files, 24GB free on my SSD drive T: for caching files. Project files etc stored on a normal hard drive F: (for Files!) 1.25TB free.
NOW last update to 2014.2 and I get constant RANDOM crashes (Windows encountered a fault and had to close this program) despite updating graphics driver and trying different settings in preferences, use mercury etc. No particular action causes it - sometimes I am just watching it play a sequence and it just stops. Though of course it may be rendering the last edit at the time.
Sometimes it runs for all of 15 mins and I think the problem has sorted then it goes again and I have to restart the project, find where I was and re-do my last edits. If I remember to press Ctrl-S very frequently (every few seconds) it seems to run for a while then I forget for 5 mins and it crashes.
Grrrr what did you do to the latest version, Adobe?? I need to get this project finally finished in a hurry.... I wish I had not updated the program! Of course I cannot go back as it says the saved copy is now incompatible with earlier Pr Pro versions.
I then tried running a previous version at the same time, as simonray suggested in his post - it worked! So I am able to continue as normal provided I do this stupid bodge fix.
So it really is down to Adobe as it is the same project, same PC, just different version update. You did something to a great, stable, program that made it unstable, Adobe...
To ANSWER RAMEEZ from previous thread:
A variety of issues can cause PPRO to crash:
a problem with the Preferences, or some other pref-related file in the Profile-<USERNAME> bin. >> DIDN'T CHANGE ANYTHING since 1½ years running previous PrPro versions on SAME PROJECT on SAME PC
the graphics driver Checked for latest version - didn't stop the crashing
third-party plug-ins - don't have any
a problem with the cache files. I am using the same 2 x SSD I have been using for years for autosave and caching. 54GB free space / 24GB free space (current cache in place)
a problem with the project file (if you're loading a project...) Doesn't apply
the Preferences files be set to read-only How would that happen? Never happened before on any other update and I can change it.
the user not having administrator rights Only one user on PC since installation, full rights
a conflict/incompatibility with some OS setting Haven't changed anything
a problem on the licensing/authentication side. I'm signed up to full Adobe CC. Everything else works, Ps, Lr, Id ...
A log file might help identify the cause of the crash. Please right-click 'My Computer', select "Manage," look under 'Event Viewer->Windows Logs->Application' to see if there's an event there from Premiere Pro. If so, copy the contents of that log and paste them here.
>>>>>>>>>>>>>>
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: VideoFilterHost.dll, version: 8.2.0.65, time stamp: 0x5486bf85
Exception code: 0xc0000005
Fault offset: 0x000000000006d692
Faulting process id: 0x19d0
Faulting application start time: 0x01d022d29c3e2d43
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\VideoFilterHost.dll
Report Id: 1097ced4-8ec8-11e4-aaaf-08606e6e6383
<<<<<<<<<<<<<<<
Thanks,
RameezProblem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere. -
On my PC (WIndows 7) Photoshop CS6 has been crashing since updating though Adobe Application Manager a couple of days ago. What is the best practice to uninstall and reinstall PS? I've had serious issues uninstalling before, so it's not necessarily a simple answer. Any help would be appreciated!
I also use the Adobe programs on a Mac and I found it odd that Adobe told me all the applications needed updating when I checked on my Windows 7 system, but said they were all up to date on my Mac (an hour later). Does that sound kosher?Have not changed any setting in PS as far as I know. The version after the update is 13.2.2 x 64
The program will also not save a file correctly as a PDF. Have not had this problem until today. The file has text and some of the text lines reproduce in the PDF as white (instead of black) and just show and outline. All the other text is normal. I've tried saving the PDF five times and no change. -
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I somehow installed a version of Firefox which won't work on my "old" iMac G5 (10.5.8) so I trashed the program and now I can't get it out of my trash bin... Any help appreciated because now I can't empty my trash at all! Thanks!!
You must purchase a new QT key for each computer.
Since you have a new iMac, you are entitled to 90 days of FREE phone tech support from Apple and you can use the Chat with a Support Agent. The online chat support _*is available 24 hours a day, 7 days a week.*_
If you've purchased an AppleCare Protection Plan, you're eligible for the duration of that agreement. -
A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
RobbieYou won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.
-
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.
Maybe you are looking for
-
Oracle 8i Installation problem on P4
I tried to install oracle 8i database on P4. but i can not install it. Is there any reason. Whether on P4, oracle can not be installed????
-
Hi, i have a doubt, can i have my pdf files on my sd, edit them while in class with no internet connection and when back online they will sync, all i want is to able to open my files without wifi and edit them but when back online sync their changes
-
Display software execution in portlet...
Does anyone know of a way to execute or display execution of a third party piece of software in a portlet? thanks Alex
-
Why can't I open a new window?
Whenever I select "New Window" from under the "File" menu, nothing happens. The selection is shown as a blank under the "Window" menu. Upgraded to Firefox 5 hoping that would stop the problem, but the problem persists.
-
'550 5.1.1 relaying not allowed ...how to resolve?
Using Outllook 2013 can send ONE email Ok,, but as soon as I have CC or BCC I get this message 550 5.1.1 relaying not allowed any ideas? thanks