Constant crashes with Edge Animate and Yosemite

I'm using Edge Animate running on a macbook pro and it is crashing every few minutes (like many others are reporting).
The program is up-to-date. I have uninstalled and reinstalled it.
Sometimes after a minute or two of working, the display features disappear. Old bounding boxes remain but, with some careful cursor action, I can still manipulate the image or symbol. . . until the entire program freezes. Other times things just stop working (e.g., motion paths). The only solution is to force quit the program -- the button on the crash notice rarely works.
Each time it crashes, it seems to create another Adobe Edge Animate CC 2014.1 Helper in the Activity Monitor (don't know what that means). I've tried deleting them but it doesn't help.
In the console, I get
2/18/15 9:16:30.612 AM Adobe Edge Animate CC 2014.1[4172]: *** Assertion failure in -[NSEvent subtype], /SourceCache/AppKit/AppKit-1343.16/AppKit.subproj/NSEvent.m:2427
There are 43 lines (!!!) that are identical to the one above.
This is obviously a known problem and needs to be acknowledged and fixed!

Hi L Nordstrom,
- If you have Dropbox installed, uninstall the software and retry.
- If you are accessing files from a remote network, copy them to your local computer, and retry.
Let us know if you still face issues.
Thanks,
Preran

Similar Messages

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Working With Edge Animate and Business Catalyst

Does anyone work with a site with incorporates Edge Animations that is hosted on Business Catalyst? I am asking because my Edge animations run fine on my page on preview in browser but do not run at all when uploaded to BC. Here is my script:
Thank you.

If you are working with your Business Catalyst site in Dreamweaver, I know you can publish from Edge Animate to an .oam file, then insert this into your BC site in Dreamweaver using Insert > Edge Animate Composition.
Just make sure to upload both the edgeanimate_assets folder and the actual project folder, or else it will not work.
If you are not going through Dreamweaver, you should still be able to utilize the animation; however, you would just need to (a) make sure the  code gets put into the <head> of your BC site, (b) upload all the necessary files (i.e. the .js files and any assets), and (c) correctly reference their locations in the code.
e.g. if you upload the Index_Desktop_Animation_2_edgePreload.js file to the root of your site, you would need to change the src="/Index_Desktop_Animation_2_edgePreload.js" to make sure the file would load properly.

Problem with Edge animate and epub3.

Greetings
I created some interactive web pages using adobe edge animate cc for a book that will be displayed on ipad (Epub 3)
when I test the web pages on pc they are displayed exactly as I want them to be.
But when I try them on Ipad It shows no images.
So I tried to append the images using some JQuey code
$('#Stage').append("<img src = '....' />");
and then when I tried to test this on Ipad all images where invisible too but when I rotated the device 90 degrees
all images became visible.
So when viewing those pages all images are invisible until rotating the device 90 degrees images become visible
any suggestions where the problem could be
I need the images to be visible when I open the page without the need of rotating the ipad
I appreciate any help.

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

Working with Edge Animate and Muse CC

Hi,
I have just published a website to the Business Catalyst server via Muse for testing (link below) and noticed that the Edge animation i have included in the website doesnt work in Internet Explorer 8 as it doesnt support HTML5, do you have a work around for this and if so how do i implement it?
Look forward to hearing from you.
http://hooperdesign.businesscatalyst.com/

i'm from orgin an php wordpress developer and im trying to make an muse site now to...
and it is a pain in the *** xD.
no control over css or html, so im starting to regret this
but you can just render it as web in edge animate wit hthe iframe checked. than place in in muse by object > insent html and insent is as iframe.
<iframe src="/folder/index.html"></iframe>
warning, you can not see anything of iframe in preview mode, you have to completely render is as html and manualy open it to see the change....
i really like edge animate but im starting to hate muse

Problems with Edge Animate and back button ios and firefox

I've put a bit of Edge content in a draft webpage:
http://cassidausa.com/indexy
..and am noticing a couple of issues:
1
When viewing in ios, I click through the content (there are links to products within the Edge animation), and then press the back button on mobile safari, only the Edge content is displayed, not the rest of the page.
2
When viewing in firefox, after clicking through a link within the Edge content and pressing the back button on the browser, the animation is paused from the point it was clicked. Other browsers that I've tested this on refresh the animation.
Ideally the edge content would continue to play from where it was.This is what seems to happen when I preview the animation in the browser from Edge animate.
Any help would be appreciated.
I really need to have this working or else I'll have to abandon creating the content in Edge.

This has always been the case for any animation in CP to be on top. Please
file a feature request. Same for communication between OAM and CP, none
for the moment. You van have transparent background and pause/play button
in OAM, could be a workaround.

Constant crashing with Logic Pro and Vienna Inst

I saw somewhere on the forum (but can't find it) a string regarding constant crashing of Logic Pro using Vienna Instruments (Special Edition). I'm experiencing 2-5 minutes of work time and then a crash - quite regularly. I also saw people point to Mac OS 10.4.9, which I also have - has this been identified as the culprit and have any fixes been offered?
Help!

Actually it's more like 1-2 minutes - sure seems coincidental to having downloaded 10.4.9 - anybody got any suggestions out there? This is killing me.

JS error on export with Edge Animate?

Ive just started messing around with Edge Animate and Muse. The first time or two that I exported it worked. But I'm not sure what I did but now everytime I export I ge tthis:
http://i.imgur.com/gtqQDiH.png
It runs FINE in the preview, but when I export I get this error everytime.
Even with a new site and a new animation.

Hi,
Great. I must tell you that the most common cause of JavaScript errors on a Muse page is .js files missing from the server or .js files, or other files on the server, not all being from the save version of Muse. If you're using an external FTP client, you must re-upload all files and folders whenever a site is exported using an updated version of Muse (since the code generated by Muse changes from release to release to improve page load performance, support new features, address new browser versions and/or devices, etc., etc.).
The second most common cause of JavaScript errors on a Muse page is buggy embed code and/or embed code that conflicts with the JavaScript used by Muse.
Regards,
Rohit Nair

What Is Edge Animate and What Can I Create with It? | Learn Edge Animate | Adobe TV

Welcome to Edge Animate, a new motion graphics tool for the web. In this video you'll learn what you can do with Edge Animate, see some sample projects, and get a good idea of the potential fun you can have with this application.
http://adobe.ly/SG2GeP

Southhampton? I've never seen it spelt that way.

Scrubbing a wheel and turning a pot with Edge Animate!

Hi all!
With the wonderful Edge Animate and the external JQuery Ui library (for the drag), I've made a wheel that you can move with a scrubber-bar.
The original, super-useful code from wich I started is made by JackPister in this thread: http://forums.adobe.com/message/4752554#4752554.
I've used Jquery Ui for dragging so I've simplified the code.
Here's a prototype: http://www.terredainventare.it/edge/wheel/Wheel.html.
Here are the Edge project files: http://www.terredainventare.it/edge/wheel/Wheel.zip
Now, (almost) all is working, but I have two question for the Forum readers and the Edge Animate experts and staff:
1) do you see that when I hover with the mouse on the scrubber, the wheel moves? Why this?
2) What if I would (and I want!) build a circular scrubber that moves together with the wheel? I'm more explicit with these picture. It would be like a pot that you move dragging the handle!!
Many thanks for your help!!!
Davide

Thanks for you quick feedback, Jack!
1) Yes, your/Darrel's solution it's sure more elegant but I need to use JQuery Ui library so I can use the handle-option to build the handle of the pot.... Any hint about the use of JQuery Ui for dragging without this tedious "over" effetct?
2) Here http://threedubmedia.com/code/event/drag I've found this code:
<script type="text/javascript">
jQuery(function($){
   $('.drag')
      .drag('start',function( ev, dd ){
         if ( !$.data( this, 'circle' ) )
            $.data( this, 'circle', {
               radius: 160,
               centerX: dd.originalX + 160 + 30,
               centerY: dd.originalY + 30
      .drag(function( ev, dd ){
         var data = $.data( this, 'circle' ),
         angle = Math.atan2( ev.pageX - data.centerX, ev.pageY - data.centerY );
         $( this ).css({
            top: data.centerY + Math.cos( angle ) * data.radius - 30,
            left: data.centerX + Math.sin( angle ) * data.radius - 30
</script>
<h1>Circular Drag Demo</h1>
<p>Drag the boxes around the page, they only move along a circular path.</p>
<div class="drag" style="left:60px;">•</div>
<div class="drag" style="left:170px;">•</div>
<div class="drag" style="left:280px;">•</div>
<style type="text/css">
body {
   background: #FFF url("http://threedubmedia.com/inc/img/circles.gif") no-repeat 0px 0px;
.drag {
   position: absolute;
   border: 1px solid #89B;
   background: #BCE;
   height: 58px;
   width: 58px;
   top: 180px;
   cursor: move;
   text-align: center;
   font: 24px/62px "Courier New", Courier, monospace;
   filter: alpha(opacity=75);
   -moz-opacity: 0.75;
   opacity: 0.75;
</style>
Do you think can be useful?
Many many thanks!!!
Davide

Glitches and Load Speed Issues with Edge Animate Site

I recently created a website at www.goshowpro.com and am having some glitches and load issues occur and would appreciate any help or insight into the matter. The site loads relatively quickly on my computer and my hosting servers technical support system but when I show it to my client it takes anywhere from 15-20 seconds, even after I have cleared the cache and cookies. All my image files are 'gifs' as to alleviate memory usage and I don't know what else to do that I haven't tried yet. Additionally, when you go to the services page from the about page, the light beams don't connect to the lighting fixtures and the text is placed differently than what I initially had in Adobe Edge Animate before I published the files. And the facebook link doesn't go to facebook but to www.goshowpro.com/facebook.... (ie I get a 404 error) even though in the program I have the link set as www.facebook.com.... I don't know what else to do besides what I have been doing and would very much appreciate any insight into these issues.
I should also mention that I used more html files than I initially planned due to lack of support on creating complete animation functionality with Edge Animate. I would like to have everything on one page but I don't know if that would be possible with the current version of Adobe Edge Animate (1.0.1.204.22434). Thank you again for your help.
Mike

Hi, Mike-
Have you tried profiling? You can use Firefox's Firebug or Google Chrome Inspector to see what's taking so long to download.
http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/
-Elaine

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

How to zoom and pan with Edge animate?

Hi,
I have been trying to make a project with Edge Animate, it is all about an image, but I want to be able to zoom and pan the image. Can you please send me an example if there is any around? or Can you explain me how to zoom and pan with Edge Animate?
Thanks,
Guasch

I am having this same issue! I am searching through forums on what tools to use to create a good zoom and pan on an image that contains hyperlinks an other things, developed in Adobe Edge Animate.
So far, here are some solutions I have come across:
http://craigfrancis.github.io/zoomify/
http://zynga.github.io/scroller/demo/dom.html
These two seem to be the closest solutions to what I'm looking for. Now I just have to integrate the javascript into my adobe ege animate composition. Hopefully that won't be too hard. Are there any suggestions from the adobe community on how to do this?

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Custom CSS Is Crashing Adobe Edge Animate

Below is the HTML and CSS for a basic page, with one style. When I open it in Adobe Edge Animate and then create a shape, and set the class of that shape to "mystyle" it displays fine in the Edge Animate window (except the border style appears missing). However, as soon as I try to move the shape, Edge crashes - consistently every time. If I create a DIV on the page outside of Edge Animate first, and apply the CSS to it, then open the page in Edge, I can move the shape around - but I lose several style options in the Properties panel such as Filters and a couple others.
I'm trying to get a better understanding of what would be the best workflow when trying to use Edge to animate existing web page layouts - creating the animations and DIVs entirely in Edge first then placing the animation into an existing layout, or creating a page layout in something like Dreamweaver (along with all my other custom CSS), then opening it in Edge to animate it.
I saw elsewhere where someone explained how to attach an external style sheet instead. This seems to work without crashing, however I cannot see the rendered style on the stage itself, only when I preview the animation in a browser.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<style type="text/css">
.mystyle {
          width: 248px;
          height: 200px;
          margin-right: 10px;
          margin-top: 10px;
          float: left;
          border: 1px solid #b6b6b6;
          -moz-border-radius: 20px;
          -webkit-border-radius: 20px;
          border-radius: 20px;
          -moz-background-clip: padding;
          -webkit-background-clip: padding-box;
          background-clip: padding-box;
          background-color: #ebebeb;
          -moz-box-shadow: 3px 4px 5px rgba(0,0,0,.1), inset 0 0 10px rgba(255,255,255,.75);
          -webkit-box-shadow: 3px 4px 5px rgba(0,0,0,.1), inset 0 0 10px rgba(255,255,255,.75);
          box-shadow: 3px 4px 5px rgba(0,0,0,.1), inset 0 0 10px rgba(255,255,255,.75);
          background-image: url(data:image/svg+xml;base64,PD94bWwgdmVyc2lvbj0iMS4wIiA/Pgo8c3ZnIHhtbG5zPSJodHRwOi8vd3d 3LnczLm9yZy8yMDAwL3N2ZyIgd2lkdGg9IjEwMCUiIGhlaWdodD0iMTAwJSIgdmlld0JveD0iMCAwIDEwMCAxMDAiI HByZXNlcnZlQXNwZWN0UmF0aW89Im5vbmUiPjxsaW5lYXJHcmFkaWVudCBpZD0iaGF0MCIgZ3JhZGllbnRVbml0cz0 ib2JqZWN0Qm91bmRpbmdCb3giIHgxPSI1MCUiIHkxPSIxMDAlIiB4Mj0iNTAlIiB5Mj0iLTEuNDIxMDg1NDcxNTIwM mUtMTQlIj4KPHN0b3Agb2Zmc2V0PSIwJSIgc3RvcC1jb2xvcj0iI2ViZWJlYiIgc3RvcC1vcGFjaXR5PSIxIi8+Cjx zdG9wIG9mZnNldD0iMCUiIHN0b3AtY29sb3I9IiNlYmViZWIiIHN0b3Atb3BhY2l0eT0iMSIvPgo8c3RvcCBvZmZzZ XQ9IjUwJSIgc3RvcC1jb2xvcj0iI2ViZWJlYiIgc3RvcC1vcGFjaXR5PSIxIi8+CjxzdG9wIG9mZnNldD0iNTElIiB zdG9wLWNvbG9yPSIjZmZmIiBzdG9wLW9wYWNpdHk9IjEiLz4KPHN0b3Agb2Zmc2V0PSI5OSUiIHN0b3AtY29sb3I9I iNkNmQ2ZDYiIHN0b3Atb3BhY2l0eT0iMSIvPgo8c3RvcCBvZmZzZXQ9IjEwMCUiIHN0b3AtY29sb3I9IiNkNmQ2ZDY iIHN0b3Atb3BhY2l0eT0iMSIvPgogICA8L2xpbmVhckdyYWRpZW50PgoKPHJlY3QgeD0iMCIgeT0iMCIgd2lkdGg9I jEwMCIgaGVpZ2h0PSIxMDAiIGZpbGw9InVybCgjaGF0MCkiIC8+Cjwvc3ZnPg==);
          background-image: -moz-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%);
          background-image: -o-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%);
          background-image: -webkit-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%);
          background-image: linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%);
          overflow: hidden;
</style>
</head>
<body>
</body>
</html>

You could use the styles inside Edge Animate directly in compositionReady. If you have an earlier version of edge for the gradient do:
For example:
sym.$('Stage').css({
'background-image': '-moz-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%)',
          'background-image': '-o-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%)',
         ' background-image': '-webkit-linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%)',
          'background-image': 'linear-gradient(bottom, #ebebeb 0%, #ebebeb 0.27%, #ebebeb 50%, #fff 51%, #d6d6d6 98.93%, #d6d6d6 100%)'
You can add the other properties between the {} with the same format:
'propertyName':'value',
Newer versions of Animate have gradient from color panel.

Constant crashes with Edge Animate and Yosemite

Similar Messages

Maybe you are looking for