Constant disconnect with centurytel and wrt54gs

I set up dsl for my parents with centurytel, and linksys wireless router.
they can get online fine but seems like while they are surfing it constantly drops the internet connection. if you go to 192.168.1.1 it shows disconected and you have to either wait for it to reconnect or just hit the connect button.
I have it set up with auto dhcp and the router is set to 192.168.2.1 I have centurytel at my house and work with no problems what so ever, any ideas to remidy this?
I have gotten router update already, checked to make sure all the dsl filters are on all the phone lines. rechecked all the settings, reset both modem and router and started from scratch ect ect. is there something Im missing.
Thanks, John

Connect a computer straight to the modem and check for a static connection...If that does not diconnect you, download the firmware for your router from here , re-connect your modem==>router==>computer...
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...
Then, unplug the power keep holding down the reset button for another 30 Seconds...
Plug the power back in, and keep holding down the reset button for 30 Seconds...
Release the reset button...Click here and follow the link to re-configure your router...Connection should be fine...

Similar Messages

Constant disconnects with wireless router.

Hello and thanks in advance for any help you can provide.
I have a WRT54G wireless router with speed booster. I am experiencing constant disconnects when online gaming. I have one PC - running windows vista 64bit ultimate. This computer is running a wireless connection which is secured and is about 10 feet from the router through a wall.
I also have an xbox 360 with a wired connection. It doesnt seem to have the same issues but does become a bit sluggish at times.
I have called linksys and they instructed me on how to upgrade to the latest firmware. I think it is 7.5.0 or something. Still having issues. Cox (my ISP) has been out and says I am getting a constant 2mb download.
Any help would be appreciated. I have talked to linksys again they have me pull up cmd and run a test which shows me at a 4-10% packet loss. They say this is an acceptable rate.
Still the problems continue. If anyone can help I would be very greatful. If you need more info just let me know and I will provide whatever I can. Thanks!!!
Message Edited by madmike6537 on 11-26-2008 03:16 PM

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

E71 constant disconnects with bluetooth

My previous post was moved to "troubleshooting tips" but thats not the case, the problem is with the E71 phone itself. The blue ant headset i have works fine with all other phones
It contantly disconnects with the E71 , the problem is the phone. What can we do to fix the phone?

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

Constant disconnects with Linksys BEFW11S4/Westell/Bellsouth Ultra DSL

I recently upgraded to the 6mb DSL service from Bellsouth. Previously I had the 3mb. Anyways everything was fine for sometime even with the faster service. The last few weeks I have been having constant disconnects(several a day). Naturally the wireless lite on my Linksys BEFW11S4 goes out each time. I then un-power the router then re-power and I'm off and running again. I am using a westell modem. Bellsouth tells me that its not them since i do have an internet coneection and referred me to Linksys. After several live chats(due to disconnects and then having to start tellin my issue all over again) they had me upgrade my firmware. Well did that and problem hasn't changed. I've played with the different router channels and they don't seem to help as well. Bellsouth told me that I had a static ip, so I tied setting up router that way, but then i got no connection. Unil reently everything was fine, this just started! Any help is greatly appreicated. My 17 yr old daughter is going through internet withdraws upstairs!

If you are on DSL using a Westell Modem; make sure you ask your ISP to bridge the Modem first and use the PPPoE fucntion on your router. Change the LAN IP of the router to something else like 192.168.2.1 so it won't get a conflict with the IP of the Westell. Then if you are on cable, you can try adjusting the MTU size to 1492, 1400, 1300, or 576 then check which value would get your connection stable. You can reset your router right after you upgrade it also, then reconfigure it again. Hopefully yell be fine after that!
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Constant disconnecting with my WRT120N

Hi
I have a problem with my wrt120n. I'm having a constant disconnecting problem.
I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok.
My old router on my computer ( wired) was working well before I installed the wrt120n.
Can someone help me?
Thank you!

This is a problem of the Linksys/Cisco WRT120N product itself. The team from Cisco/Linksys is very irresponsible. Why i say so ?
The 802.11n signal is not certified to be supported but yet they have included this support in this router. By doing so, it causes this related problem that most consumers must be facing now or in the past. It is a shame that such a big company operates and sell their products this way.
The solution: It does not have anything to do with MTU, beacon interval etc.... Just use Mixed BG wireless signal instead of
Wireless N only when you goes to Manual Setup. I am sure that this solves the problem.

Cannot Roam/Extend with WAP54G and WRT54G

I purchased a WRT54G wireless router originally and found that the signal was quite weak on the other side of my 4000sf home on adjoining floors. So I purchased a WAP54G to *extend* my network. I have never gotten this to extend the range as claimed by Linksys. This is entirely frustrating. The manual is fairly useless as a troubleshooting guide.
Further, the manual differs from advice on this forum! The manuals says to make sure the SSID, channel and security settings are identical. When I tried this configuration, my laptop did not associate with the better signal of the WAP54G, but still connected to the worse signal of the main WRT54G. So then I saw a post on this forum that said the channels should be different. I tried setting the WRT54G to channel 6 and WAP54G to channel 1. Same results. The laptop is associating with the main router. I have disabled security through the process. I only use MAC addresses to restrict access to cients.
Then I wondered if my laptop's wireless adaptor firmware could be the problem. I found a post somewhere that said one should try changing the "roaming aggressiveness" parameter in the driver. I played with this an it had no effect either. It still associates with the main WRT54G router.
I am totally confused and disappointed. I am getting the feeling that Linksys doesn't really have a viable solution here. I would appreciate someone from Linksys/Cisco providing a thorough post on how to make this work properly.
Thanks.

HI , the one point that interested me was that even though your laptop was able to see the signal of the AP , it was still connecting to the SSID of the router.
One suggestion here....try and remove all networks from under the preferred network list on your PC..(from the wireless connection properties). then add the preferred networks and define the preference list.
Let me know if this works for you.

Constant disconnects with "no PPPoE" and "no valid IP address" errors

I have AT&T DSL and have an Airport Extreme connected to a Speedstream 4100 modem. My Internet connection has been fine for nearly a year with the AEBS but for the past couple weeks has been disconnecting so frequently that it's almost become useless. The problems reported by the AEBS are: PPPoE Server (no PPPoE server found) and Internet Connection (AEBS doesn't have a valid IP address). It's always these two problems reported.
Restarting the AEBS gets me connected again, and sometimes the connection will come back on its own, but only for a short while. I don't know how to troubleshoot this. Help! Here are my AEBS settings:
Radio Mode: Automatic
Radio Channel Selection: Automatic
Wireless Security: WPA2 Personal
Use wide channels: Checked
Create a closed network: Checked
Use interface robustness: Unchecked
Sorry, I'm not a network guy so forgive me if I've omitted some important information. Below the log from a recent bout of connects and disconnects:
Jun 19 10:04:06 Severity:5 Disconnected.
Jun 19 10:04:09 Severity:5 Binding added for udp, 0.0.0.0:32816 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:04:09 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:06:40 Severity:5 Binding added for udp, 0.0.0.0:32817 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:06:40 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:07:37 Severity:6 Parameter updated - drTY.
Jun 19 10:07:37 Severity:5 unloading current configuration.
Jun 19 10:07:47 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:07:47 Severity:5 Rotated CCMP group key.
Jun 19 10:07:47 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:07:52 Severity:5 (WAN) link state is Up.
Jun 19 10:07:57 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:07:57 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:08:02 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:04 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:08:04 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:08:06 Severity:5 Connection accepted from [::ffff:10.0.1.2]:61426.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61428.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61427.
Jun 19 10:08:13 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:08:13 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:08:17 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:18 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:18 Severity:5 Binding added for udp, 0.0.0.0:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:20 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:22 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:26 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:27 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:08:28 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:32 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:08:32 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Jun 19 10:09:09 Severity:5 Disconnected.
Jun 19 10:11:32 Severity:5 Initialized (firmware 7.4.2).
Jun 19 10:11:34 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:11:35 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:11:35 Severity:5 Rotated CCMP group key.
Jun 19 10:11:35 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:39 Severity:5 (WAN) link state is Up.
Jun 19 10:11:45 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:45 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:45 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:11:50 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +5 seconds).
Jun 19 10:11:50 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:11:50 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:11:52 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61481.
Jun 19 10:11:53 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61483.
Jun 19 10:11:54 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61484.
Jun 19 10:11:55 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:55 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:12:02 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:12:02 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:12:08 Severity:7 Public address reported as xxx.xxx.xxx.xxx to 10.0.1.4:5353
Jun 19 10:12:08 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:12:08 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:12:25 Severity:5 Disconnected.
Jun 19 10:17:00 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:17:10 Severity:5 Disconnected.
Jun 19 10:17:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:17:49 Severity:5 Binding added for udp, 0.0.0.0:32770 to 10.0.1.4:5353 with lifetime 7200
Message was edited by: DakotaPaul

This is what the log has looked like for the past several hours.
Jun 19 17:37:49 Severity:5 Binding added for udp, 0.0.0.0:32851 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:37:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:39:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:43:48 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:48 Severity:5 Binding added for udp, 0.0.0.0:32852 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:43:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:55 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:03 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:45:03 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:49:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:49 Severity:5 Binding added for udp, 0.0.0.0:32853 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:49:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:51:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:54:46 Severity:5 Rotated CCMP group key.
Jun 19 17:57:01 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:57:01 Severity:5 Binding added for udp, 0.0.0.0:32854 to 10.0.1.4:5353 with lifetime 7200
Thanks for any help you can provide. I'm about to throw the modem and/or router out the window!

Airtunes not working with AE and WRT54G Router

Hey all,
I have been trying to get my Airport Express to see my WRT54G router for 2 days now. And each time after I have done mulitple reset on both units and disconnected the LAN line from the AX, I still can't get iTunes to see my Airtunes network.
I have a WRT54G v.2 wireless router. I have gotten the newiest firmware from Linksys and when I got the update, my setting for the router has changed to a WRT54GL router under my settings from the router webpage. I am thinking this maybe the problem, but don't think Linksys would make a mistake with this fireware update. So, i checked multiple times to make sure I got the latest correct update and did so.
Then, I followed the main setup to get the router to see the AX. I am using WEP Key and all, but still have no success. Weird thing is, I have had the AE for a long time and remember last year I threw a New Years party and had it configured correctly to see both my G4 Laptop and G5 Desktop. Now that I have sold my laptop I wanted to use my G5 to send music to the Linksys router to then connect to the Airport Express block. And now it won't see the router when the ethernet cable is disconnected from the AX.
Anyone have any ideas? I really appreciate it.
los

hi again,
something appears to prevent your ae to join you LinkSys LAN. And you shouldn't have to enter any IP adress.
From now, you should use the AirPort Admin utility located in the utility folder. This utility will allow you to get into all the ae parameters.
I'm not able to gives you a walkthrough from here but if you linksys have DHCP option activated, your ae should join it by simply giving it the rigth password. Besides, if you have latest firmwire, I do not think you need to add any $ to your password.
Does your router have any other security enable like specific MAC adress?

HELP!!!!! With WRT55AG AND WRT54G

Hi I have 2 Routers a WRT55AG and a WRT54G no offence but they both stopped working correctly after the morons at linksys chat AND phone support sed that I needed to upgrade the firmware :@.
sooooo first things first the WRT55AG gives my Mac a bad IP even after I reset the router BUT every other computer on our network works just fine :@.
and the same thing with the other one:@.
"The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, "You know, I want to set those people over there on fire, but I'm just not close enough to get the job done"

If you are able to connect to the internet through the router then try these steps.
Access the set up for the router using http://192.168.1.1 on the address bar of internet explorer and then type password as "admin" on the password prompt. Click on the Wireless tab
- Here Wireless Network mode should be mixed
- Provide any name in the Wireless Network Name (SSID) box, all in
lower cases without any spaces in between.
- Set wireless channel to 11
- And wireless SSID broadcast should be Enabled and then click on save
settings.
Please make a note of Wireless Network Name (SSID) as this is the `
Network Identifier.
For Wireless Security : -
Now Click on the Sub tab under Wireless > Wireless Security.
Change the Wireless security mode to WEP
Encryption should be 64 bits.
Leave the Pass phrase blank, don't type in anything.
And under WEP Key 1 type in any 10 numbers please.Click on save
settings.
Please make a note of WEP Key 1 as this is the Security Key for the
Wireless Network.

Cable disconnected with macintosh and sg200 26 cisco router

I owe a SG200 26 port switch and it works fine so far.
Amacintosh computer (mountain lion) has been added to the wired net. Everything works fine t first, but there's a sudden disconnection issue.
It seems that the macintosh computer is not able to communicate to the switch, and the macintosh prompts a lack of cable connection. None of the lights on the switch are on.
If I plug the macintosh cable directly to a router ethernet port, it works properly.
I need some advise about that, please.
Does anybody know anything?
Thanks.

Hello everybody,
I encountered a similar problem with my 2011 iMac 27 and a Cisco SG300-10. Especially after coming from hibernation the Mac claims to have no ethernet connection (no physical cable attached) from time to time, although lights on the switch are on. I need to reboot the Mac in order to get the connection back.
Above that there seems to be some trouble negotiating the correct settings between those two devices. This is some typical console output from the Mac regarding its en0 interface after the wakeup:
19.01.13 09:17:13,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:17:17,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2301,0de1,0300,c1e1,0800]
19.01.13 09:17:19,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:17:21,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2303,0de1,0300,c1e1,0800]
19.01.13 09:17:23,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:17:25,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2303,0de1,0300,c1e1,7800]
19.01.13 09:17:34,453 configd[16]: network changed: v6(en0+:fe80::2665:11ff:fe97:88b3) DNS+ Proxy+ SMB
19.01.13 09:17:36,275 configd[16]: network changed: v4(en0+:192.168.0.14) v6(en0:fe80::2665:11ff:fe97:88b3) DNS! Proxy SMB
19.01.13 09:17:45,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled, BJP 818)
19.01.13 09:17:49,493 configd[16]: network changed: v4(en0-:192.168.0.14) v6(en0-:fe80::2665:11ff:fe97:88b3) DNS- Proxy- SMB-
19.01.13 09:18:04,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0300,0de1,0300,c1e1,0800]
19.01.13 09:18:05,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:18:08,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0300,0de1,0300,c1e1,0800]
19.01.13 09:18:09,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:18:12,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0301,0de1,0300,c1e1,0800]
19.01.13 09:18:14,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
19.01.13 09:18:17,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,0f00,0de1,0300,c1e1,7800]
19.01.13 09:18:20,111 mDNSResponder[40]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:426C:8FFF:FE15:B51E)
19.01.13 09:18:21,970 configd[16]: network changed: v6(en0+:fe80::2665:11ff:fe97:88b3) DNS+ Proxy+ SMB
19.01.13 09:18:28,448 configd[16]: network changed: v4(en0+:192.168.0.14) v6(en0:fe80::2665:11ff:fe97:88b3) DNS! Proxy SMB
19.01.13 09:18:28,450 mDNSResponder[40]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.14)
19.01.13 09:19:04,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled, BJP 826)
19.01.13 09:19:07,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0321,0181,0000,c1e1,0800]
19.01.13 09:19:08,184 configd[16]: network changed: v4(en0-:192.168.0.14) v6(en0-:fe80::2665:11ff:fe97:88b3) DNS- Proxy- SMB-
19.01.13 09:19:08,185 configd[16]: arp_client_transmit(en0) failed, Network is down (50)
19.01.13 09:19:08,185 configd[16]: bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
19.01.13 09:19:08,185 configd[16]: DHCP en0: INIT-REBOOT transmit failed
19.01.13 09:19:08,186 configd[16]: DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
19.01.13 09:19:08,187 mDNSResponder[40]: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.14)
As you can see, the link goes up and down like the Santa Maria on Columbus' first expedition. In addition to that there is no "EEE enabled" entry although the network chipset (BCM57765) is EEE compatible and the Cisco affirms "EEE Support on Remote" for the specific port.
I don't know if there is something wrong with the Mac OS X network driver (10.8.2) or with the switch firmware, at least I thought I let you know and maybe you can take a look or have a hint.
Regards,
Christoph

Constant disconnecting with HomeHub1

I've recently started having problems with my BT HomeHub1 and i'm stumped on what to do with this.
All devices connected to the homehub are thrown off in random intervals at the same time, and the broadband connection drops out of the list of wireless networks available in the area. But the lights on the hub remain the same, saying that it is still connected to the internet.
When I reset the homehub and let it load, it connects but then disconnects again and this problem repeats between 10 minutes to an hour.
There are no problems in my area when I checked the site
I tried the quiet line test and i've heard no crackling noise.
I tried finding that ADSL Line Status for homehub1 but there is no guide to get to that screen.
If anybody could help guide me into how to sort this out I would greatly appreciate it. Thanks.

Its most likely a fault with the HH1 or its power unit. I have a HH1 and am on my second power unit.
This guide will tell you how to get to the ADSL stats ADSL Statistics
Or for a direct link, use this BT Home Hub 1 - DSL Connection
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Constant crashing with FF13 and newest Flash. Tried reinstall of previous version; nothing but trouble

A few weeks ago, everything worked very nicely on my desktop computer. Then I succumbed to the nagging and "upgraded" to FF13, as well as the new Flash and Real players. Immediately, FF started crashing. First, it would instantly crash with any tab that had Flash embedded.
OK, I disabled and then finally uninstalled Flash and Real, but that didn't solve the problem; it would still crash 3 or 4 times a day, and with as few as 30 tabs open (the previous version could easily run 100+ tabs). Apart from those 3 "updates", the only other thing I had done was to update my existing plug-ins and add-ons, but I even tried disabling all of my plug-ins and add-ons; FF still kept crashing!
Today, I got fed up and uninstalled FF13 (after using MozBackup), and d/loaded and installed the previous version of FF. Did that solve the problem? Nope. Now, I can't get Tab Mix Plus to work, nor can I find my hundreds of old saved Sessions with Session Manager.
I tried uninstalling Tab Mix Plus and then reinstalling it, but I just get an error message saying it couldn't be installed. In fact, this is the THIRD time I've had to type this post, since the first time, I mistakenly tried to open a new tab to search Tab Mix Plus in Google, but the f{ck1ng tab opened Google right over this page, wiping out my almost finished post, and the second time, I went to Tools-->Options-->Manage Add-Ons-->Tab Mix Plus-->Options, and it froze up FF, requiring restarting it! Indeed, it seems as if the entire Manage Add-Ons menu is now buggy and generally freezes up.
I am *this*far*away* from ditching FF entirely (after 7 years of being loyal to it) and trying Chrome. It really is infuriating how difficult it is to get this straightened out! Any help would be greatly appreciated.

Have you tried creating a new Firefox profile and testing whether that will run without crashes? This is a non-destructive test that creates a new settings folder. It picks up plugins from the registry, but otherwise looks like a fresh install.
If you haven't used the Profile Manager before, this article describes how to start up into it and create a new profile: [[Use the Profile Manager to create and remove Firefox profiles]].
You can import your bookmarks by restoring a backup from your previous profile folder. For convenience of access, make a copy of your last bookmarks backup on the desktop. You can find that folder using Help > Troubleshooting Information > Show Folder; navigate up one level to view your last active profile, then into the bookmarkbackups folder. Copy the latest .json file to the desktop. Then in the dialog pictured in the article "[[Back up your bookmarks or move them to another computer]]", use Restore > Choose File to import that file into your new profile.
Can you get through a day without crashing?

Help needed with ps3 and wrt54g

Hi,
I need some help on my ps3 on connecting to my router. I am able to connect my ps3 to my router Linksys wrt54g using wired connection and able to connect to the internet.
But when ever I on the media server network to link to my pc to share files. My Ps3 starts to prompt that the cable is not connected and my router starts to restart.
Can anyone pls help me.....tks

Do you have UPNP enabled on the router and is your pc's firewall configured for file sharing?

Constant disconnect for wireless and wired for the past two weeks...

And it's becoming worse and worse. I don't understand and Verizon has escalated my problem - BUT NO ONE HAS CALLED ME BACK. It's been over two weeks. I've restarted, reset, rebooted, screen shared with tech support. They even sent me a new modem. Both modems behave the same way. I know it's an outside line issue. It has to be. This started after a bad storm. They won't listen though. Tonight - I ordered Comcast Internet. They are coming to install on Thursday. If Verizon can't fix by then they are done in my book!

Be prepared to be moving on to comcast then, I've had the same issue for 3 months now, 3 techs, 20+ hours of phone calls, multiple no call backs and been hung up on a few times, even here my topic gets locked and no help is provided Verizon doesn't seem to be willing to fix actualy problems with their service so by all means switch to a company who will

Constant disconnects with flashing DSL light

Hi, my Infinity 2 connection has been unusable since last Friday 8th Feb. I get at the most a few minutes of up time then the connection drops with a flashing DSL light on the Openreach Modem.
I have tried power cycling the hub and modem, changed the cable to the socket and also relocated the modem.
I logged the call with BT on the 9th and on the 11th they marked the job as fixed, but it isnt.
This situation is very frustrating as I rely on my connection heavily for home and vpn to work but there seems to be no progress in a resolve.

I phoned the helpline in the end and the guy the other end actually did a line test and found an issue. Apparently an engineer is booked but cannot come out until 21st Feb!!! That will be nearly 2 weeks downtime. I have not had the appointment in confirmed in black or white which is not reassuring either.
Really annoyed as when I had adsl with 02 any issue (which was very rare) got resolved either next day or within the promised 3 days.
I also didn't have to chase them to resolve it and they Defo didn't mark a job as fixed until it actually was.
Not very impressed by BT at all. I have phone, Bt Vision and Infinity 2 with them so I pay them enough every month.

Constant disconnect with centurytel and wrt54gs

Similar Messages

Maybe you are looking for