Constant disconnects and webpages failing to load ...

First off I tried phoning but I just got passed around departments for 20+minutes and then hung up on... so naturally I don't care to go through that shoddy phone service again, I just hope theres a mod or something on here that can help.
Basically my net keeps going off at random times and sometimes certain webpages won't load in no matter what I do yet when this occurs other webpages load in fine. Speed of the net in general is fine still, I haven't noticed any dramatic speed drops and when these problems do happen the speed stays up at 50mb/s down and 12mb/s up.
Any mods out there that could help out? I can PM all the relevant details as required.
Thanks in advance

If you expect answers to anything on here I would say you will be waiting for the same length of time as the product we're all unhappy with "Infinity / Infinity2"

Similar Messages

Webpages and videos fail to load

I have Mac OS X 10.7.5, and I am using Safari 6.1.1.
Some webpages do load, but others fail to load. The blue loading often stops after reaching a certain point. Additionally, when I try to play video content within pages I am sometimes told that the plug-in cannot be found. However, Safari does not actually crash.
I have: emptied the Safari Caches, removed all website data, and switched all Safari extensions off. I have also installed plug-ins: Adobe Flash Player (latest version), Shockwave, Silverlight, Java, Flip4mac, and Adobe Acrobat. I also deleted all files from Macintosh HD/Library/Caches (which may have been unwise....).
The problem does not appear to be with Safari, as I have tried using Opera and Firefox, and they both experience the same issues (videos and webpages failing to load).
Assistance or advice would be appreciated.
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

I have poor/no service on my iphone 6 in places that I do have service on my old iphone 5. Takes 10 minutes to send text and webpages will not load but load within seconds on the iphone 5 and forget making a phone call. How do i resolve this issue??

Hey kristiac,
Thanks for the question. If I understand correctly, you have no service on the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't connect to a cellular network or cellular data - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

What to do if wifi keeps disconnecting and safari does not load?

My wifi on my Mac desktop keeps disconnecting. When the internet is connected, Safari often "cannot connect to server" or "safari cannot load page" or page "failed to load". The wifi works on my iPhone and iPad, so I'm not sure why it doesn't work on the desktop. Is there anything simple I can do to fix this? Thank you.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local only
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Constant disconnections and reboots

Over the last couple of weeks, my Homehub 4 seems to be disconnecting and rebooting more frequently than usual.
But today it has been happening constantly. It will happen during an incoming or outgoing landline call, but more often it is happening when the landline is not in use. The landline is noticeably and unusually crackly.
I have performed a BT line test but no fault was found, and I am warned of the potential £129 charge if I proceed with an engineer call out. I have tested via the master socket and experience the same crackle on the landline, and same disconnections/reboots with the Homehub 4. I have replaced the filters and also tested with my old Homehub 3, but still experience all the same issues.
Connecting via BT Fon, I experience far better speeds than my home connection has been of late.
I will try and copy a couple of pages of the Homehub's Events Log, but am having difficulty remaining online long enough to access the hub's settings. It makes little sense to me, but I am wonder if someone else could kindly take a look to see if anything stands out as a possible cause of the problem.
Many thanks.

13:23:44, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:44, 21 Jun.
BLOCKED 3 more packets (because of Advanced Filter Rule)
13:23:43, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:61592->239.255.255.250:1900 on wlan0.0)
13:23:43, 21 Jun.
BLOCKED 1 more packets (because of Advanced Filter Rule)
13:23:43, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:43, 21 Jun.
BLOCKED 1 more packets (because of Advanced Filter Rule)
13:23:42, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:138->10.131.37.255:138 on wlan0.0)
13:23:42, 21 Jun.
BLOCKED 3 more packets (because of Advanced Filter Rule)
13:23:40, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:61592->239.255.255.250:1900 on wlan0.0)
13:23:40, 21 Jun.
BLOCKED 3 more packets (because of Advanced Filter Rule)
13:23:40, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:40, 21 Jun.
BLOCKED 15 more packets (because of Advanced Filter Rule)
13:23:38, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:38, 21 Jun.
BLOCKED 11 more packets (because of Advanced Filter Rule)
13:23:37, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:61592->239.255.255.250:1900 on wlan0.0)
13:23:37, 21 Jun.
BLOCKED 15 more packets (because of Advanced Filter Rule)
13:23:36, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: IGMP 10.131.37.250->224.0.0.22 on wlan0.0)
13:23:36, 21 Jun.
BLOCKED 35 more packets (because of Advanced Filter Rule)
13:23:35, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: IGMP 10.131.37.250->224.0.0.22 on wlan0.0)
13:23:35, 21 Jun.
BLOCKED 47 more packets (because of Advanced Filter Rule)
13:23:34, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:61592->239.255.255.250:1900 on wlan0.0)
13:23:34, 21 Jun.
BLOCKED 19 more packets (because of Advanced Filter Rule)
13:23:33, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:1900->239.255.255.250:1900 on wlan0.0)
13:23:33, 21 Jun.
BLOCKED 9 more packets (because of Advanced Filter Rule)
13:23:33, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:33, 21 Jun.
BLOCKED 15 more packets (because of Advanced Filter Rule)
13:23:32, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:61592->239.255.255.250:1900 on wlan0.0)
13:23:32, 21 Jun.
BLOCKED 13 more packets (because of Advanced Filter Rule)
13:23:31, 21 Jun.
( 713.680000) OpenWiFi IPSec connection is up
13:23:30, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:1900->239.255.255.250:1900 on wlan0.0)
13:23:30, 21 Jun.
BLOCKED 13 more packets (because of Advanced Filter Rule)
13:23:29, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:29, 21 Jun.
BLOCKED 9 more packets (because of Advanced Filter Rule)
13:23:29, 21 Jun.
OUT: BLOCK [44] Advanced Filter Rule (fw/policy/0/chain/fw_wlan0.0_out/rule/0: UDP 10.131.37.250:137->10.131.37.255:137 on wlan0.0)
13:23:26, 21 Jun.
( 708.670000) CWMP: session completed successfully
13:23:26, 21 Jun.
( 708.170000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
13:23:20, 21 Jun.
wlan1: STA bc:96:80:07:f4:6d IEEE 802.11: Client disassociated
13:23:19, 21 Jun.
( 701.810000) Device disconnected: Hostname: DC-PC IP: 192.168.1.69 MAC: bc:96:80:07:f4:6d
13:23:15, 21 Jun.
( 697.830000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:23:15, 21 Jun.
( 697.820000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
13:22:51, 21 Jun.
( 673.430000) CWMP: session closed due to error: Could not resolve host
13:22:51, 21 Jun.
( 673.410000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:22:51, 21 Jun.
( 673.410000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
13:22:21, 21 Jun.
( 643.120000) CWMP: session closed due to error: Could not resolve host
13:22:19, 21 Jun.
( 641.470000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:22:19, 21 Jun.
( 641.460000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
13:22:19, 21 Jun.
( 641.180000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
13:17:45, 21 Jun.
( 367.470000) CWMP: session completed successfully
13:17:45, 21 Jun.
( 367.230000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
13:17:44, 21 Jun.
( 366.330000) Admin login successful by 192.168.1.69 on HTTP
13:17:41, 21 Jun.
( 363.290000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:17:41, 21 Jun.
( 363.280000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
13:17:24, 21 Jun.
( 346.410000) New GUI session from IP 192.168.1.69
13:17:09, 21 Jun.
( 331.710000) CWMP: session closed due to error: WGET TLS error
13:17:08, 21 Jun.
( 328.970000) NTP synchronization success!
13:17:07, 21 Jun.
( 328.010000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
13:17:03, 21 Jun.
( 323.870000) NTP synchronization start
13:17:02, 21 Jun.
( 323.000000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:17:02, 21 Jun.
( 322.990000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
13:16:24, 21 Jun.
( 295.520000) CWMP: session closed due to error: Could not resolve host
13:16:24, 21 Jun.
( 295.520000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:16:24, 21 Jun.
( 295.520000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
13:16:03, 21 Jun.
( 264.430000) CWMP: session closed due to error: Could not resolve host
13:16:03, 21 Jun.
( 263.530000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
13:15:53, 21 Jun.
( 253.710000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:15:53, 21 Jun.
( 253.700000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
13:15:38, 21 Jun.
( 238.850000) NTP synchronization failure!
13:14:49, 21 Jun.
( 190.150000) CWMP: session closed due to error: Could not resolve host
13:14:49, 21 Jun.
( 189.920000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
13:14:49, 21 Jun.
( 189.920000) CWMP: Session start now. Event code(s): '1 BOOT,4 VALUE CHANGE'
13:14:18, 21 Jun.
( 158.840000) CWMP: session closed due to error: Timeout
13:13:59, 21 Jun.
( 140.200000) Lease for IP 192.168.1.69 renewed by host DC-PC (MAC bc:96:80:07:f4:6d). Lease duration: 1440 min
13:13:59, 21 Jun.
( 140.120000) Lease requested
13:13:59, 21 Jun.
wlan1: STA bc:96:80:07:f4:6d IEEE 802.11: Client associated
13:13:57, 21 Jun.
( 137.520000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
13:13:42, 21 Jun.
( 122.710000) NTP synchronization start
13:13:41, 21 Jun.
( 121.860000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username

Constant disconnecting and reconnecting with WPA2 enterprise wifi. Any available solution?

I know it can't be the wifi because as recent as yesterday on Mavericks everything was fine. Now after the update it constantly disconnects and reconnects as much as a few times per five minutes! I've read on Reddit other people are having similar problems. Hopefully Apple fixes this soon.

Looking at the Console.app logs, it seems that the machine decides to bounce between two APs:
17/10/2014 19:22:07.000 kernel[0]: ARPT: 36912.641537: MacAuthEvent en0   Auth result for: 20:c9:d0:a7:91:9e MAC AUTH succeeded
17/10/2014 19:22:11.000 kernel[0]: ARPT: 36915.802654: MacAuthEvent en0   Auth result for: 20:c9:d0:af:a3:54 MAC AUTH succeeded
17/10/2014 19:22:14.000 kernel[0]: ARPT: 36918.976595: MacAuthEvent en0   Auth result for: 20:c9:d0:a7:91:9e MAC AUTH succeeded
17/10/2014 19:22:17.000 kernel[0]: ARPT: 36922.166582: MacAuthEvent en0   Auth result for: 10:9a:dd:87:5b:93 MAC AUTH succeeded
17/10/2014 19:22:20.000 kernel[0]: ARPT: 36925.323944: MacAuthEvent en0   Auth result for: 10:9a:dd:87:5b:93 MAC AUTH succeeded
17/10/2014 19:22:20.000 kernel[0]: AirPort: RSN handshake complete on en0
17/10/2014 19:22:20.000 kernel[0]: wl0: Roamed or switched channel, reason #3, bssid 10:9a:dd:87:5b:93, last RSSI -73
17/10/2014 19:22:20.000 kernel[0]: en0: BSSID changed to 10:9a:dd:87:5b:93
17/10/2014 19:22:20.000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
17/10/2014 19:24:01.000 kernel[0]: ARPT: 37026.789184: MacAuthEvent en0   Auth result for: 20:c9:d0:af:a3:54 MAC AUTH succeeded
17/10/2014 19:24:05.000 kernel[0]: ARPT: 37029.979376: MacAuthEvent en0   Auth result for: 20:c9:d0:af:a3:54 MAC AUTH succeeded
17/10/2014 19:24:05.000 kernel[0]: AirPort: RSN handshake complete on en0
17/10/2014 19:24:05.000 kernel[0]: wl0: Roamed or switched channel, reason #3, bssid 20:c9:d0:af:a3:54, last RSSI -65
17/10/2014 19:24:05.000 kernel[0]: en0: BSSID changed to 20:c9:d0:af:a3:54
17/10/2014 19:24:05.000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
17/10/2014 19:27:06.000 kernel[0]: ARPT: 37210.896826: MacAuthEvent en0   Auth result for: 20:c9:d0:a7:91:9e MAC AUTH succeeded
17/10/2014 19:27:09.000 kernel[0]: ARPT: 37214.088570: MacAuthEvent en0   Auth result for: 20:c9:d0:af:a3:54 MAC AUTH succeeded
17/10/2014 19:27:12.000 kernel[0]: ARPT: 37217.263429: MacAuthEvent en0   Auth result for: 20:c9:d0:a7:91:9e MAC AUTH succeeded
17/10/2014 19:27:15.000 kernel[0]: ARPT: 37220.429042: MacAuthEvent en0   Auth result for: 10:9a:dd:87:5b:93 MAC AUTH succeeded
17/10/2014 19:27:18.000 kernel[0]: ARPT: 37223.509291: MacAuthEvent en0   Auth result for: 10:9a:dd:87:5b:93 MAC AUTH succeeded
17/10/2014 19:27:18.000 kernel[0]: AirPort: RSN handshake complete on en0
17/10/2014 19:27:18.000 kernel[0]: wl0: Roamed or switched channel, reason #3, bssid 10:9a:dd:87:5b:93, last RSSI -76
17/10/2014 19:27:18.000 kernel[0]: en0: BSSID changed to 10:9a:dd:87:5b:93
17/10/2014 19:27:18.000 kernel[0]: en0::IO80211Interface::postMessage bssid changed

Slow browsing, timeouts and pages failing to load

Hi,
Over the last few days we've been having browsing issues on multiple devices where pages are taking forever to load if at all. We're sometimes having to refresh the browser 3 or 4 times to get a page to load correctly.
Sites like speedtest, once I've got it to load show low ping speeds and the Upload / Download speeds are what I would expect on our line. I've rebooted the router and modem but this hasn't resolved the problem.
Please advise.
Regards
Neil.

Hi i would just like to add to this as i have been having the exact same issues in the last around 5 days, if i look at my speeds on speedtest they are as good as they usually are but problems with not loading pages instantly disconnections from certain services but not others for as little as 5 seconds and general slow browsing has started to become incredibly annoying especially when it seems to come out of nowhere.

PC constant disconnect and strange log entrys

A few weeks ago I upgraded my PC (new motherboard, psu, case) and ever since I have had problem with my USB wi fi modem. Now it will work for a few mins then kinda disconnect for a few seconds then come back when this happens all web pages stop loading. and this is what my log looks like. I havn't got any port forwarding set by me, the firewall is disabled and upnd is off. This is on a HH3 any idea what the issues is?
20:39:04, 09 Jun.
(98044.160000) Admin login successful by 192.168.1.64 on HTTP
20:39:00, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [125.168.213.194:50945] ppp1 NAPT)
20:38:44, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [84.50.124.197:1024] ppp1 NAPT)
20:38:38, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [50.82.242.170:21027] ppp1 NAPT)
20:38:30, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [217.121.7.95:24312] ppp1 NAPT)
20:38:22, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [182.69.222.75:47859] ppp1 NAPT)
20:38:14, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [86.136.123.14:6882] ppp1 NAPT)
20:38:10, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [50.165.210.26:45408] ppp1 NAPT)
20:37:52, 09 Jun.
(97972.220000) Lease for IP 192.168.1.67 renewed by host android-dff43c505bfe7c0b (MAC 20:d3:90:bb:d4:d4). Lease duration: 1440 min
20:37:52, 09 Jun.
(97972.220000) Device connected: Hostname: android-dff43c505bfe7c0b IP: 192.168.1.67 MAC: 20:d3:90:bb:d4:d4 Lease time: 1440 min. Link rate: 104.0 Mbps
20:37:52, 09 Jun.
(97972.200000) Lease requested
20:37:52, 09 Jun.
(97971.790000) Lease for IP 192.168.1.64 renewed by host Jordan-PC (MAC 90:f6:52:ca:a1:cb). Lease duration: 1440 min
20:37:52, 09 Jun.
(97971.790000) Device connected: Hostname: Jordan-PC IP: 192.168.1.64 MAC: 90:f6:52:ca:a1:cb Lease time: 1440 min. Link rate: 104.0 Mbps
20:37:52, 09 Jun.
(97971.780000) Lease requested
20:37:52, 09 Jun.
ath0: STA 90:f6:52:ca:a1:cb IEEE 802.11: Client associated
20:37:52, 09 Jun.
ath0: STA 20:d3:90:bb:d4:d4 IEEE 802.11: Client associated
20:37:51, 09 Jun.
IN: ACCEPT [57] Connection closed (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [98.198.39.126:36449] ppp1 NAPT)
20:37:50, 09 Jun.
(97970.240000) Device disconnected: Hostname: android-dff43c505bfe7c0b IP: 192.168.1.67 MAC: 20:d3:90:bb:d4:d4
20:37:50, 09 Jun.
(97970.230000) Device disconnected: Hostname: Jordan-PC IP: 192.168.1.64 MAC: 90:f6:52:ca:a1:cb
20:36:47, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [125.168.213.194:50945] ppp1 NAPT)
20:36:31, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [84.50.124.197:1024] ppp1 NAPT)
20:36:22, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [182.69.222.75:47859] ppp1 NAPT)
20:36:17, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [217.121.7.95:24312] ppp1 NAPT)
20:36:10, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [50.165.210.26:45408] ppp1 NAPT)
20:36:01, 09 Jun.
IN: ACCEPT [54] Connection opened (Port Forwarding: UDP 192.168.1.64:46589 <-->81.155.118.252:46589 [86.136.123.14:6882] ppp1 NAPT)
20:35:49, 09 Jun.
(97848.330000) Lease for IP 192.168.1.67 renewed by host android-dff43c505bfe7c0b (MAC 20:d3:90:bb:d4:d4). Lease duration: 1440 min
20:35:49, 09 Jun.
(97848.330000) Device connected: Hostname: android-dff43c505bfe7c0b IP: 192.168.1.67 MAC: 20:d3:90:bb:d4:d4 Lease time: 1440 min. Link rate: 104.0 Mbps
20:35:48, 09 Jun.
(97848.320000) Lease requested
20:35:48, 09 Jun.
(97847.940000) Lease for IP 192.168.1.64 renewed by host Jordan-PC (MAC 90:f6:52:ca:a1:cb). Lease duration: 1440 min
20:35:48, 09 Jun.
(97847.940000) Device connected: Hostname: Jordan-PC IP: 192.168.1.64 MAC: 90:f6:52:ca:a1:cb Lease time: 1440 min. Link rate: 104.0 Mbps
20:35:48, 09 Jun.
(97847.930000) Lease requested
20:35:48, 09 Jun.
ath0: STA 90:f6:52:ca:a1:cb IEEE 802.11: Client associated
20:35:48, 09 Jun.
ath0: STA 20:d3:90:bb:d4:d4 IEEE 802.11: Client associated

Boot from the Hardware Test disc that came with the computer. Follow the onscreen directions and run the extended test a number of times. This will be time consuming, but it may be the only way to get it to turn up an error. Does sound like it might be the video card. Apple replacement parts for the G5 are not very reliable. Write down the error if you get one.
Message was edited by: WZZZ

Constant disconnects and slow speed

Between 7am and 9pm my internet is just terrible. I lose connection pretty much all day. The longest I'm able to be online is maybe half an hour. It just goes out at random times and stays out until later at night and it will come back.
Also my speed is just all over the place. When downloading stuff it goes from 380 kb/s to 100 kb/s and goes back and forth.
I have a Westell 327w.
Transceiver Revision: 7.2.3.0
Vendor ID Code: 4
Line Mode: G.DMT Mode
Data Path: Interleaved
Transceiver Information Downstream Path Upstream Path
DSL Speed (Kbits/Sec) 3360 640
Margin (dB) 21.5 10.0
Line Attenuation (dB) 24.5 13.0
Transmit Power (dBm) 7.3 11.9
I forgot to mention that 2 technicians came out. The first one came out ran a test and said everything was fine. The second one came out and did a test and went up the street for something. He also said that the connection would go out for a day or two. It has been 2 and a half weeks since.

#1 Margin (dB) - Signal to noise margin. 6 is pretty bad possibly unusable at times, 20 is very good. You normally want 12dB or better IIRC from back in my DSL days. The higher the number, the better to a point.
Line Attenuation - Measure the amount the signal has degraded. Below 20dB is excellent, above 50 is poor, fill in the dots for anything in between.
a) Did you try connecting your modem directly to the NID?
Points to: http://www.dslreports.com/faq/1317
b) If not, please do and retest those margins and Line Attenuation.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

MacBook Pro won't boot up. read error 0x7 failes to load a number of drivers?

Dear All,
Lately I am having quite a bit of trouble with my Late 2011 MacBook Pro. It seems to be stuck in a vicious circle of boot-ups.
Since a couple of days it is taking ages (like 5 min) to boot up, and today it just doesn't get to te "user-screen" anymore.
I have tried to boot it in safe-mode and tried to enter the repair utility, but those don't seem to work.
When I tried booting it in single-user mode, it told me it had "read error 0x7" and it fails to load a whole number of drives.
When I run a Fysical System Check, it tells me the Macintosh HD can not verified?
What can I possibly do to get back in there again? are all my documents lost?

This may work if the drive is OK. If it's accessible but corrupted try the second procedure.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
And, it neither work consider my original suggestion.

All DLLS in site fail to load, exception 0x80070057

My C# web application stopped working for no apparent reason, while a similar
application on the same server still works. Looking for ideas what could be
going on and how to fix it.
Yesterday I launched a build of the site with some minor updates. The server
apparently went down during the build, because for a few minutes the TeamCity build manager
displayed a message indicating the connection had been lost. However, it
recovered and resumed the build.
After the build, I was no longer able to load the site. The home page now
seems to be the only page that can load, and it displays incorrectly because the
scripts and stylesheets fail to load. If I check the browser’s error console I
find reports of multiple server error 500’s, where the referenced css and script
files are failing to load.
The server is IIS on Windows Server 2008.
If I go to the server and open the site there, the page gives me error
messages saying, “Could not load file or assembly ‘Antlr3.Runtime.Debug’ or one
of its dependencies. The parameter is incorrect. (Exception from HRESULT:
0x80070057 (E_INVALIDARG)).”
Initially it was reporting the same message for a different file,
AntiXssLibrary. I removed that DLL from the project, and the site switched to
complaining about antlr instead. It looks like the problem isn’t either DLL, but
something else.
On my machine, a nearly identical copy of the same code works without
problem. Another copy of the site on the same server, a slightly earlier version
of our software, works just fine.
I deleted all of the temp files recommended for this error, redid the build,
restarted the machine, and deleted the bin directory and repeated the build. I’m
skeptical that uninstalling or reinstalling any versions of the .net framework
would help, given that the other site works—any problem with the frameowkr ought
to affect both of them.
I turned on assembly logging, which gave me lots of additional information
that didn’t help at all.
Any suggestions what could be going on?

Hi Laura Eve,
I have google this error, SomeOne encountered the same problem, I have collected some solutions. Please have a look.
1. empty your %TEMP% folder:
close all programs that you are using (the one in the system tray included)
Click the start button
click Run
type: %TEMP% in the box
click the OK button
2. Now a the directory for temporary files opens:
select all files ( CTRL – A)
press the DELETE key on your keyboard
acknowledge that you want to delete all files
3. The library lib folder
are deleted, then SVN update.
By the way, This forum is to discuss problems of C# development. You'll need to post it in the dedicated ASP.Net Forum
http://forums.asp.net for more efficient responses, where you can contact ASP.NET experts. Thanks for understanding.
Have a nice day!
Kristin

Recently upgraded to iTunes 9.1.1 and will no longer load iTunes

It comes up with compatibility errors and when you try and fix them it changes my settings and still fails to load iTunes!! It worked fine before the upgrade. Someone please help, I miss my music and downloading new songs for my iPod and Phone!!!
Ty x

It comes up with compatibility errors and when you try and fix them it changes my settings and still fails to load iTunes!!
When you go into the compaitibility mode tab for the iTunes application, have you been making sure that all the boxes in there are unchecked? (Any checked box in there can produce a compatibility mode error, not just the compaitibility mode checkbox itself.)
If all the boxes are unchecked, but you're still getting compatibility mode errors (especially if you've got a 64-bit version of Windows 7), the messages can be caused by an errant registry setting. See RandomBehavior's post here for advice on troubleshooting that possibility:
http://discussions.apple.com/message.jspa?messageID=10397771#10397771

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

On 6u13, new plug-in fails to load on Windows 2003 and IE7

I'm attempting to load an applet in IE7 with an OBJECT tag in Windows 2003. This is a mature product that has, for this release, moved from 5 to 6. The CLSID was changed from the CAFEEFAC one for any version of 5 to the one for any version of 6. Java 5 version worked fine on Windows 2003. Now, on some, but not all, of our 2003 systems the ActiveX control for the new Java Plug-in fails to load.
These configurations work:
- Windows XP and any Java and any IE
- Windows 2003 and Java5 and any IE
- Windows 2003 and Java6, old plug-in, and any IE
- Windows 2003 and Java6 and APPLET tag and any IE
This one doesn't...on some machines:
- Windows 2003 and Java6, new plug-in, IE7, OBJECT tag
This is not a security problem. If I turn off the new style plug-in in the control panel, it works. However, I'd really like to avoid doing this, as the new plug-in has much needed features. Also, the APPLET tag works where the OBJECT tag doesn't. I can implement this change if needed, but it would be fairly painful and I'd prefer to avoid it.
Does anyone know why this might be happening? Is there a good way for me to diagnose this? The browser is quite silent as to what the error might be.
I appreciate any help. This one is truly vexing me!

Okay, I'm wrong...I thought I could move to APPLET tags...I cannot. LiveConnect from JavaScript to Java does not support APPLET tags, only OBJECT tags. This makes my problem worse, as I don't have any recourse so far, except to disable the new plugin.
However, this did lead to a clue: disabling the new plugin caused it to work again. When the new plugin was re-enabled to see it fail again, much to my surprise, it worked! Does anyone know what flipping that option actually does? Registry change or something else?

Pages fail to load and instead show "invis.gif 1x1 pixels"

Leopard 10.5.1, Safari 3.0.4, Mac Book Pro, Airport to Linksys WRT54Gv6 to Cable Modem.
Sometimes, while viewing certain pages, Safari will fail to load the page and instead show "invis.gif 1x1 pixels" in the window title bar. The content area is plain white. Ironically, this is 100% reproducible when trying to reply to a forum post here.
With the Debug menu enabled, Web Inspector shows the following warnings:
* Resource interpreted as document but transferred with MIME type image/gif.
* http://discussions.apple.com/post!reply.jspa?messageID=6033688
* Resource interpreted as image but transfered with MIME type text/html.
* http://discussions.apple.com/favicon.ico
I've seen this failure before while randomly browsing the web, but this is the first URL I've come across that is 100% reproducible. Firefox 2.0.0.11 and Opera 9.24 don't have a problem loading the page on the same computer.
Thoughts?
Kenny

Thanks iBod! I spent an hour at the local Apple Store and walked away with no solution. But the guy did say check the discussions board and I was also running into the following messages in my title bar:
adclick (GIF Image, 1x1 pixels)
click (GIF Image, 1x1 pixels)
(GIF Image, 1x1 pixels)
I had tried a trial version of NetBarrier that came with my Virus Barrier and Personal BackUp and when I deleted the app my problems began. I had no idea it was the culprit because it happened in both Safari and Firefox.
Well after reading your reply...
I went into Preferences and deleted the folder called "Net Barrier" and no more problems.
Thanks again!
Next time I'll check here first!

Constant disconnects and webpages failing to load ...

Similar Messages

Maybe you are looking for