Constant disconnects with wireless router.

Hello and thanks in advance for any help you can provide.
I have a WRT54G wireless router with speed booster. I am experiencing constant disconnects when online gaming. I have one PC - running windows vista 64bit ultimate. This computer is running a wireless connection which is secured and is about 10 feet from the router through a wall.
I also have an xbox 360 with a wired connection. It doesnt seem to have the same issues but does become a bit sluggish at times.
I have called linksys and they instructed me on how to upgrade to the latest firmware. I think it is 7.5.0 or something. Still having issues. Cox (my ISP) has been out and says I am getting a constant 2mb download.
Any help would be appreciated. I have talked to linksys again they have me pull up cmd and run a test which shows me at a 4-10% packet loss. They say this is an acceptable rate.
Still the problems continue. If anyone can help I would be very greatful. If you need more info just let me know and I will provide whatever I can. Thanks!!!
Message Edited by madmike6537 on 11-26-2008 03:16 PM

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

Similar Messages

Constant disconnects with Linksys BEFW11S4/Westell/Bellsouth Ultra DSL

I recently upgraded to the 6mb DSL service from Bellsouth. Previously I had the 3mb. Anyways everything was fine for sometime even with the faster service. The last few weeks I have been having constant disconnects(several a day). Naturally the wireless lite on my Linksys BEFW11S4 goes out each time. I then un-power the router then re-power and I'm off and running again. I am using a westell modem. Bellsouth tells me that its not them since i do have an internet coneection and referred me to Linksys. After several live chats(due to disconnects and then having to start tellin my issue all over again) they had me upgrade my firmware. Well did that and problem hasn't changed. I've played with the different router channels and they don't seem to help as well. Bellsouth told me that I had a static ip, so I tied setting up router that way, but then i got no connection. Unil reently everything was fine, this just started! Any help is greatly appreicated. My 17 yr old daughter is going through internet withdraws upstairs!

If you are on DSL using a Westell Modem; make sure you ask your ISP to bridge the Modem first and use the PPPoE fucntion on your router. Change the LAN IP of the router to something else like 192.168.2.1 so it won't get a conflict with the IP of the Westell. Then if you are on cable, you can try adjusting the MTU size to 1492, 1400, 1300, or 576 then check which value would get your connection stable. You can reset your router right after you upgrade it also, then reconfigure it again. Hopefully yell be fine after that!
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Constant disconnecting with my WRT120N

Hi
I have a problem with my wrt120n. I'm having a constant disconnecting problem.
I don't have any problem with the wireless computers connected to the router but the wired one keep geeting disconnected. I'm loosing the internet many times a day on thiis one. Like I said the wireless is ok.
My old router on my computer ( wired) was working well before I installed the wrt120n.
Can someone help me?
Thank you!

This is a problem of the Linksys/Cisco WRT120N product itself. The team from Cisco/Linksys is very irresponsible. Why i say so ?
The 802.11n signal is not certified to be supported but yet they have included this support in this router. By doing so, it causes this related problem that most consumers must be facing now or in the past. It is a shame that such a big company operates and sell their products this way.
The solution: It does not have anything to do with MTU, beacon interval etc.... Just use Mixed BG wireless signal instead of
Wireless N only when you goes to Manual Setup. I am sure that this solves the problem.

E71 constant disconnects with bluetooth

My previous post was moved to "troubleshooting tips" but thats not the case, the problem is with the E71 phone itself. The blue ant headset i have works fine with all other phones
It contantly disconnects with the E71 , the problem is the phone. What can we do to fix the phone?

Sounds like a vista problem, they are breading like rabbits it seems. The WRT54G is a good router, I had one for years with no problems. What type of wireless card do you have in the pc, and is it PCI or USB

Can't log in with wireless router

I have successfully used my WRT54GS v.2 wireless router for a year of two. Tonight I am attempt to connect and cannot. I am using for username and admin for password, per Lynksis instructions (and what has worked in past). It apparently is not recognizing these because after a couple of attempts I get a 401 error message. I have tried Lynksis online chat on a different computer. They had me reset the device, which didn't help. I have also been disconnected from them 3 times, so that's not too helpful. Thoughts anyone??

reset the router for a minute and do a power cycle...try to access the router again..if still facing the same issue , open IE >> tools >>internet options >> click content tab and click the tabs clear forms and clear password

Constant disconnect with centurytel and wrt54gs

I set up dsl for my parents with centurytel, and linksys wireless router.
they can get online fine but seems like while they are surfing it constantly drops the internet connection. if you go to 192.168.1.1 it shows disconected and you have to either wait for it to reconnect or just hit the connect button.
I have it set up with auto dhcp and the router is set to 192.168.2.1 I have centurytel at my house and work with no problems what so ever, any ideas to remidy this?
I have gotten router update already, checked to make sure all the dsl filters are on all the phone lines. rechecked all the settings, reset both modem and router and started from scratch ect ect. is there something Im missing.
Thanks, John

Connect a computer straight to the modem and check for a static connection...If that does not diconnect you, download the firmware for your router from here , re-connect your modem==>router==>computer...
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...
Then, unplug the power keep holding down the reset button for another 30 Seconds...
Plug the power back in, and keep holding down the reset button for 30 Seconds...
Release the reset button...Click here and follow the link to re-configure your router...Connection should be fine...

Airport Express not working with wireless router

I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-

Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
===============================================================================

Problems with Wireless Router and Adapter

I tried posting this in the wireless adapter forum but nobody responded :-(
I'm using a WRT54G Router btw, and the firmware is v2.02.7, Feb. 27, 2004.
Hi everyone,
I have a Linksys Wireless G Router and several computers that I try to connect with. One of them is a computer running Windows XP and using a Linksys Wireless USB B Adapter (WUSB11). Another is a laptop running Mandriva Linux using a Linksys Instant Wireless Network PC Card (WPC11). Another one is running Windows Vista and using a Linksys Wireless N card. I also have a laptop running Windows XP using a Linksys Wireless-G Notebook Adapter (WPC54G). I also have another PC running Windows XP and uses a Linksys Wireless USB Adapter WUSB54G. Finally, I have two macintosh laptops running OSX and with airport devices installed.
Anyway, I have problems with my internet connection frequently being interrupted and even sometimes I won't have a connection at all for hours. This occurs with my Linux laptop, the PC with the Wireless B Adapter, and the laptop using the Wireless G Notebook Adapter. In addition to this, the macintosh laptops have internet even more infrequently. However, I seem to never have a problem with the Windows Vista desktop or the Windows XP desktop that has the Wireless G adapter. I try repairing the connection and often it does not work. I have also tried resetting the router and the cable modem. I'm not sure what else I can do. I even bought a Wireless N router and had little success with that. We even went as far as moving the wireless router upstairs into our living room, thinking that the signal was somehow suffering from interference or that distance was a factor. Anyway, sorry for the long post but I could really use some help!
Thanks.

Hi… logon to wireless N router’s setup page, open I.E. an in the address bar type 192.168.1.1 it would ask for username and password, put "admin" as a paassword (default password) without any username...linksys setup pops up, click on on wireless tab and and try changing radio band to wide 40MHz, wide channel to 9 and wireless standard channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

Combine RV042G with wireless router

Hi,
I bought a RV042 dual WAN router. I have two ISP's, one Satellite Internet and one Fixed wireles. Now I would pefer to hook up both Inernet connections to the RV042 and then connect to a wireless router ( I have a D-Link DIR-655) where I then connect my computers rather wired or wirless. Could anyone please help me with this setup? I would greatly appreciate that. Perhaps there is somewhere a write up about this.
Thanks, Johann

Hi everybody,
I guess I figured it out. works kike a charm now!

Need Help: Trouble with Wireless Router Connection on MBP

Hi all. I just bought a MacBook Pro (my first Mac ever) and love, love, love it. However, one glitch is driving me crazy. I do *NOT* have an airport but I connect to my cable modem through my netgear wireless router. When my MacBook Pro goes into sleep mode, I lose the connection to the wireless router. I have to go unplug the router to reboot it for the MBP to see it again. I think it has something to do with how it is assigning the IP address. Has anyone else seen this issue? Know how to solve it? Thanks so much.

See "Symptom: The network connection drops unexpectedly" on this page:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6

Communication Error with wireless router, Works fine with Ethernet cable.

Video iChat is fine when my MBP and other MB's and MBP's are at my house using the Netgear 240 rangemax wireless router. I'm currently running High speed Internet via cable modem through Time Warner Cable. When I try to chat with them while they are at home, I get a communication error. I then tried to use the Ethernet cable hooked up to the cable modem to my MacBook Pro. It worked fine. I would like to use video iChat via my wireless router. I don't understand why it is not working. I think it is my router. Do I need to buy an Airport Extreme Base Station or can I still use this router. Can you possibly help me configure this Netgear router? The internet connection is fine when I use the wireless router.
MBP 15" C2D 2.33 Mac OS X (10.4.8) Cable Modem, Netgear RangeMax 240 WPNT834 wireless router

I have not had very good experiences with the Netgear routers. I can't say that it is the router causing your problem, however, it might be the effective wireless bandwidth over your router. Do a speedcheck and determine the download and upload speed with wireless. Hopefully you're getting about 400Kbps up and 400Kbps down or about 1000Kbps in total.

Weird errors with wireless router

I have a TP-Link router set up at my relatives' place. It works perfectly well with two iPhones and an iPad, with no problems whatsoever.
My MacBook Pro is a different story. I have set it up with this router. When I manage to get it to work, it works flawlessly... Until my laptop goes to sleep. Then, when waking up from sleep, it does the following things (about 3 out of 5 times):
1. It keeps searching for networks, and finds several unknown ones (neighbors, etc.) after a long while.
2. It complains that none of the preferred networks are available...
3. Then it (sometimes) goes on to list my TP-Link router, even if it clearly contradicts 2.
4. When trying to connect to it, it sometimes (but not always) asks for the password (even though it's saved in Keychain)
5. Then it times out trying to connect.
I repeat, and/or turn AirPort off and on, and after several minutes, it eventually starts working again.
Signal strength is okay. Two iPhones manage to connect from the same room, at the same time. These, as well as an iPad, always work. 100% of the time. No exception.
My MacBook Pro doesn't have any similar problems on any other WiFi networks.

Apr 26 00:38:59 Andras-Puizs-MacBook-Pro airportd[344]: Apple80211Associate() failed -3905 (Timeout)
^^this one several times, plus some of these below:
Apr 26 00:38:59 Andras-Puizs-MacBook-Pro Apple80211 framework[136]: airportd MIG failed (Associate Event) = -3905 (Timeout) (port = 42259)
Just plain old timeout, it seems.

I'm having trouble with holding signal with wireless router

I Have iMac and having trouble holding a signal from my wireless router dual band.

More details needed.

[SOLVED] Unstable connection with wireless router using rt73

I'm using the rt2x00 wireless driver for my rt73 based dongle and I'm on the latest (stock) kernel 2.6.31-6.
On startup my wireless connection behaves normal. Here's the output of iwconfig :
wlan0 IEEE 802.11bg ESSID:"dlink"
Mode:Managed Frequency:2.417 GHz Access Point: 00:1C:F0:C5:C7:0B
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Now after some time (15 minutes, half an hour, an hour or sometimes even after 5 minutes) my connection between the dongle and my wireless router gets lost and it sometimes reconnects automatically, sometimes not. In my browser I frequently get an error that my connection is lost. However, if I 'reload' the web page after that I almost instantly get the demanded page. Another option is to restart my wireless network using '/etc/rc.d/net-profiles restart'.
Here's an output of pinging my wireless router that describes the above behavior :
chris@megatron ~]$ ping -v 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=4999 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=4000 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=3001 ms
64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=2001 ms
64 bytes from 192.168.0.1: icmp_seq=5 ttl=64 time=1001 ms
64 bytes from 192.168.0.1: icmp_seq=6 ttl=64 time=1.95 ms
64 bytes from 192.168.0.1: icmp_seq=7 ttl=64 time=0.561 ms
64 bytes from 192.168.0.1: icmp_seq=8 ttl=64 time=2.89 ms
64 bytes from 192.168.0.1: icmp_seq=9 ttl=64 time=1.99 ms
64 bytes from 192.168.0.1: icmp_seq=10 ttl=64 time=2.74 ms
64 bytes from 192.168.0.1: icmp_seq=11 ttl=64 time=2.78 ms
64 bytes from 192.168.0.1: icmp_seq=12 ttl=64 time=2.77 ms
dmesg does not output anything special about my rt73.
What's happening ? Is there any way I can get more verbose output for my problem ?
Thanks in advance.
Last edited by Strider (2009-12-14 21:05:23)

Ok, I think I solved the problem.
I did two things :
1) switch from wpa to wpa2 (made new netcfg profile); I do not know if that helps much but I changed it since my router (a DLINK 635 wireless N) advises to so since this augments performance compared to a configuration that needs to support both wpa and wpa2.
2) rebooted my rooter the moment I encountered the connection problem. The router is configured to automatically switch the best channel available. It switched from channel 1 to 7. Apparently there was interference on channel 1 (probably because of wireless network of one of my neighbors ...).
For some strange reason the combination of these two make my network stable now. I'll cross my fingers and hope this does not happen again anymore...
Last edited by Strider (2009-12-14 21:04:08)

Constant disconnects with "no PPPoE" and "no valid IP address" errors

I have AT&T DSL and have an Airport Extreme connected to a Speedstream 4100 modem. My Internet connection has been fine for nearly a year with the AEBS but for the past couple weeks has been disconnecting so frequently that it's almost become useless. The problems reported by the AEBS are: PPPoE Server (no PPPoE server found) and Internet Connection (AEBS doesn't have a valid IP address). It's always these two problems reported.
Restarting the AEBS gets me connected again, and sometimes the connection will come back on its own, but only for a short while. I don't know how to troubleshoot this. Help! Here are my AEBS settings:
Radio Mode: Automatic
Radio Channel Selection: Automatic
Wireless Security: WPA2 Personal
Use wide channels: Checked
Create a closed network: Checked
Use interface robustness: Unchecked
Sorry, I'm not a network guy so forgive me if I've omitted some important information. Below the log from a recent bout of connects and disconnects:
Jun 19 10:04:06 Severity:5 Disconnected.
Jun 19 10:04:09 Severity:5 Binding added for udp, 0.0.0.0:32816 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:04:09 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:06:40 Severity:5 Binding added for udp, 0.0.0.0:32817 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:06:40 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:07:37 Severity:6 Parameter updated - drTY.
Jun 19 10:07:37 Severity:5 unloading current configuration.
Jun 19 10:07:47 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:07:47 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:07:47 Severity:5 Rotated CCMP group key.
Jun 19 10:07:47 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:07:52 Severity:5 (WAN) link state is Up.
Jun 19 10:07:57 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:07:57 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:08:02 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:04 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:08:04 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:08:06 Severity:5 Connection accepted from [::ffff:10.0.1.2]:61426.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61428.
Jun 19 10:08:08 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61427.
Jun 19 10:08:13 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:08:13 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:08:17 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:08:18 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:18 Severity:5 Binding added for udp, 0.0.0.0:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:20 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:22 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:26 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:08:27 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:08:28 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:08:32 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:08:32 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +0 seconds).
Jun 19 10:09:09 Severity:5 Disconnected.
Jun 19 10:11:32 Severity:5 Initialized (firmware 7.4.2).
Jun 19 10:11:34 Severity:5 Connecting via ethernet (user "[email protected]" service "AT&T DSL Connection").
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 19 10:11:35 Severity:3 No Address for NTP server time.apple.com.
Jun 19 10:11:35 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
Jun 19 10:11:35 Severity:5 Rotated CCMP group key.
Jun 19 10:11:35 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:39 Severity:5 (WAN) link state is Up.
Jun 19 10:11:45 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:11:45 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:45 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:11:50 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +5 seconds).
Jun 19 10:11:50 Severity:5 Associated with station 7c:6d:62:a2:dc:0c
Jun 19 10:11:50 Severity:5 Installed unicast CCMP key for supplicant 7c:6d:62:a2:dc:0c
Jun 19 10:11:52 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61481.
Jun 19 10:11:53 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61483.
Jun 19 10:11:54 Severity:5 Connection accepted from [fe80::216:cbff:fe00:ee34%bridge0]:61484.
Jun 19 10:11:55 Severity:5 Associated with station 00:16:cb:00:ee:34
Jun 19 10:11:55 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:00:ee:34
Jun 19 10:12:02 Severity:5 Associated with station 00:24:36:90:4e:f6
Jun 19 10:12:02 Severity:5 Installed unicast CCMP key for supplicant 00:24:36:90:4e:f6
Jun 19 10:12:08 Severity:7 Public address reported as xxx.xxx.xxx.xxx to 10.0.1.4:5353
Jun 19 10:12:08 Severity:5 Binding added for udp, xxx.xxx.xxx.xxx:32769 to 10.0.1.4:5353 with lifetime 7200
Jun 19 10:12:08 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 10:12:25 Severity:5 Disconnected.
Jun 19 10:17:00 Severity:5 Connection established xxx.xxx.xxx.xxx -> 151.164.187.11.
Jun 19 10:17:10 Severity:5 Disconnected.
Jun 19 10:17:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 10:17:49 Severity:5 Binding added for udp, 0.0.0.0:32770 to 10.0.1.4:5353 with lifetime 7200
Message was edited by: DakotaPaul

This is what the log has looked like for the past several hours.
Jun 19 17:37:49 Severity:5 Binding added for udp, 0.0.0.0:32851 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:37:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:37:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:38:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:39:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:43:48 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:48 Severity:5 Binding added for udp, 0.0.0.0:32852 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:43:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:43:55 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:03 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:19 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:44:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:45:03 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:49:49 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:49 Severity:5 Binding added for udp, 0.0.0.0:32853 to 10.0.1.4:5353 with lifetime 7200
Jun 19 17:49:50 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:51 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:49:57 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:05 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:21 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:50:53 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:51:04 Severity:5 Binding dropped for udp to 10.0.1.4:5353
Jun 19 17:54:46 Severity:5 Rotated CCMP group key.
Jun 19 17:57:01 Severity:7 Network down reported to 10.0.1.4:5353
Jun 19 17:57:01 Severity:5 Binding added for udp, 0.0.0.0:32854 to 10.0.1.4:5353 with lifetime 7200
Thanks for any help you can provide. I'm about to throw the modem and/or router out the window!

Constant disconnects with wireless router.

Similar Messages

Maybe you are looking for