Constant drops

Since 10:00 AM this morning I have nonstop drops and dcs. One error I saw from my log was: TLV-11 - unrecognized OID;CM-MAC=64:55:b1:43:e4:06;CMTS-MAC=64:9e:f3:66:c4:7c;CM-QOS=1.1;CM-VER=3.0; The router that I am using is a Motorola SBG6580 DOCSIS 3.0. The current software version is: SBG6580-6.5.2.0-GA-06-077-NOSH. I hope someone has a solution. B.

bmnisius wrote:
Since 10:00 AM this morning I have nonstop drops and dcs. One error I saw from my log was: TLV-11 - unrecognized OID;CM-MAC=64:55:b1:43:e4:06;CMTS-MAC=64:9e:f3:66:c4:7c;CM-QOS=1.1;CM-VER=3.0; The router that I am using is a Motorola SBG6580 DOCSIS 3.0. The current software version is: SBG6580-6.5.2.0-GA-06-077-NOSH. I hope someone has a solution. B.Start at the top of the forum with the stickied post about basic troubleshooting. Good info there and gives you background for later when people are assisting. Follow EG's Gospel of the Connection seeking to eliminate any excess splitters and loose/corroded connections. Query your modem and post the Up/Down stream power levels and SNR (might want to do this before and then again after application of the gospel to see what changes if anything).

Similar Messages

Sky Fibre constant drop out and low speed

Hi everyone,
Just recently switched provider from Plusnet fibre to Sky fibre and boy, has it been a stressful few days. First off, our fibre went live on the 6th of this month but these last couple of days I've been experiencing low speeds between 10-20 mb which I understand is meant to be normal (Never had this issue when I joined plusnet) and I have constant drop outs when I'm surfing the net or playing internet games on my Wii U
I've phoned Sky within the last two days and told them what's going on and they've done some tests on their end and they are telling me that I'm getting speeds up to 41 mb which I'm not getting, but they can't seem to understand why I keep having this drop out issue with my devices and my laptop and my gaming console. They have sent me a new hub, but I personally don't think sending out a new hub will make a difference. I've stuck a a Ethernet cable into my Sky fibre router and attached a openreach router, to the other end and see if that stops the drop out.
I'm inclined to leave sky, because I have a feeling this poor service will continue, unless someone can help me.
Thanks

Jan 1 00:00:07 syslog: BusyBox v1.17.2
Jan 1 00:00:16 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:24 syslog: Line 0: VDSL G.993 started
Jan 1 00:00:31 syslog: Line 0: VDSL2 link down
Jan 1 00:00:34 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:42 syslog: Line 0: VDSL G.993 started
Jan 1 00:01:01 syslog: Line 0: VDSL2 link up, Bearer 0, us=9995, ds=39998
Jan 1 00:01:04 syslog: ptm0.1 - WAN link UP.
Jan 1 00:01:04 syslog: Received valid DHCP lease from server. Connection UP.
Jan 1 00:01:04 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.97.46]
Jan 1 00:01:05 syslog: Send out NTP request to ntp1.isp.sky.com
Jan 1 00:01:05 syslog: Time has been set from ntp1.isp.sky.com
Aug 9 00:05:11 syslog: Received NTP Sync Reply from ntp1.isp.sky.com
Aug 9 00:11:49 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:11:56 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:11:57 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:04 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:06 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:08 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:09 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:21 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:22 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:23 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:24 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:32 syslog: Line 0: VDSL2 link down
Aug 9 00:12:34 syslog: Clear IP addresses. IP connection DOWN.
Aug 9 00:13:41 syslog: eth2 - WAN link UP.
Aug 9 00:13:41 syslog: Received valid DHCP lease from server. Connection UP.
Aug 9 00:13:41 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 00:19:01 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 00:47:49 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 01:22:53 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 01:51:41 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 02:24:57 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 02:54:57 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 03:00:00 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 03:32:58 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 04:07:26 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 04:39:12 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:11:16 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:37:04 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:37:05 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 06:01:57 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 06:30:27 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 06:54:27 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 07:27:25 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 08:01:35 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 08:25:35 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 08:28:51 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 09:04:13 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]

Fps constant drops

Hi guys. I have an hp pavilion dv6 6195sp. Have it for a couple of years now and out of a sudden whilst playing a couple of online games, more specifically league of legends I've constant fps drops. The standard 60 fps I should be playing come down to 10, 20. I've opened the computer and cleaned the fan. I've also wiped the computer to bring it to initial factory settings and still does the same.
Would be nice if someone had a rough idea about what to do

Crcguerreiro wrote:
Hi guys. I have an hp pavilion dv6 6195sp. Have it for a couple of years now and out of a sudden whilst playing a couple of online games, more specifically league of legends I've constant fps drops. The standard 60 fps I should be playing come down to 10, 20. I've opened the computer and cleaned the fan. I've also wiped the computer to bring it to initial factory settings and still does the same.
Would be nice if someone had a rough idea about what to doOnline FPS drops means Server problems not laptop problems since all the data is streaming from the Servers. You don't get 60fps on Consumer laptops only True Gaming Laptops can do the 60fps rating as you saw you get only 10 or 20 fps is more closer to Consumer laptops. Not sure why you thought a non-gaming consumer laptop should get 60fps just on it's hardware.

IPhone 6, iOS 8.0.2, constant dropped Bluetooth... a solution

After reading many, many, many postings here on Apple Support and all over the web about the iPhone 6 and iOS 8.0.2 and how Bluetooth connections in the car are being dropped all the time for all different makes and models of cars, I figured I'd post my "adventure" and how I solved the problem. This was posted as a reply to another posting, but I figured I'd start a new thread so people can find it easier.
Here's the posting and solution:
I had the same exact problem with my iPhone 6, running iOS 8.0.2, when connecting to my 2014 Ford Fusion with the My Ford Touch (MFT) system. Calls would "drop" after about 10 to 15 seconds. Only it wasn't the call that was dropping, but rather the Bluetooth connection crapping out.
I found the answer (which I will list at the bottom of this posting), but first here are the many things I tried BEFORE I found out the answer:
1) updated 2014 Ford Fusion MyFordTouch with latest firmware upgrade from Ford (v.3.7).
2) Unpaired and deleted iPhone 6 from MyFordTouch
3) Deleted SYNC from Bluetooth in iPhone 6
4) Reset Network Settings in iPhone 6
5) Did Master Reset to MyFordTouch system.
6) Added iPhone 6 back into MyFordTouch
7) Successfully paired iPhone 6 with MyFordTouch
8) STILL dropped calls after ALL that.
The answer I arrived at after chatting online with Apple Support Reresentative ("Emmy").   I backed up my iPhone 6 to iTunes (even though I don't normally like to use iTunes), then used iTunes to do a RESTORE to my iPhone 6., which effectively downloaded a virgin copy of iOS 8.02 to my computer and then iTunes applied it to my phone. This RESTORE function completely WIPED my phone clean (so I had to make sure I did a backup otherwise I'd have lost everything).
AFTER the restore of iOS 8.0.2, the iPhone started to walk through the setup. BUT here is the IMPORTANT part. THIS TIME, I said, "Set Up as NEW Phone" instead of "restore from iCloud backup" (like I had been doing). I skipped the signing in with my Apple ID and all the rest and got to the Home screen.
Then I went out to the Ford Fusion and paired the iPhone 6 to the car.
This time NO dropped calls at all. Worked perfectly. I spoke with a friend for over 5 minutes and the call sounded great.
THEN, Emmy (support rep) said to do an "Erase All Content and Settings" and to do it OFFLINE (meaning NOT to connect to iTunes). So, iPhone 6 was wiped again. This time when it came up, I *DID* do a "Restore from iCloud Backup" and restored the phone.
After the restore, I shut the phone off. Went to car. Deleted the pairing from previously on the My Ford Touch system.   Then took key out, opened door, and closed it (thereby "rebooting" My Ford Touch).    THEN I powered up my iPhone 6.
Paired to Ford. Pair to iPhone.
And.... it WORKED. And continues to work.
So... I'm not exactly sure why this worked. The only thing I can figure is perhaps the iTunes RESTORE that I did, wiped everything and left a clean iOS 8.0.2 and then when I did the restore from iCloud it laid on only what was not already on the iPhone in a newer state.
After you read all the above, and after I typed this, I realize that this is a LOT to do just to get back Bluetooth functionality.
I'm thinking that Apple should release an 8.0.3 or an 8.1 update that will address all this for people that don't have over 3 hours to do what I did above to restore functionality.
I've seen other posts and this is happening to ALL car makes and models, not just Ford.
Hope this helped some people.

Even easier than what I wrote originally.    Just do a RESET ALL SETTINGS . I was originally only trying the "reset network settings" but didn't try reset ALL settings.   This has helped 5 of my friends regain their Bluetooth connectivity with a variety of autos.   But remember two things: 1) back up data on your phone before trying this and 2) don't forget to delete the bluetooth original pairing from your car.

Constant drops and hangs

Hi
I bought my Airport Extreme base station before Christmas and have sufferer very frequent dropouts and reboots and/or complete hangs. Just now, I dropped connectivity and the logs show for the immidiate time period and my minute long wireless downtime:
Feb 25 18:19:32 Severity:6 Parameter updated - fire.
Feb 25 18:19:32 Severity:6 Parameter updated - acRI.
Feb 25 18:19:32 Severity:5 unloading current configuration.
Feb 25 18:19:50 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Feb 25 18:19:50 Severity:5 Internet Configuration leased -- host <213.113.132.47/255.255.255.192> gateway <213.113.132.1> dns <195.54.122.199 81.26.227.3 195.54.122.204 81.26.228.3> wins lease <3600> dom
Feb 25 18:19:50 Severity:5 Rotated TKIP group key.
Feb 25 18:19:53 Severity:5 Associated with station 00:16:cb:bd:42:8c
Feb 25 18:19:53 Severity:5 Installed unicast CCMP key for supplicant 00:16:cb:bd:42:8c
Feb 25 18:20:02 Severity:5 (WAN) link state is Up.
Feb 25 18:20:29 Severity:5 Connection accepted from fe80::216:cbff:febd:428c%bridge0/49237.
Feb 25 18:20:46 Severity:5 Connection accepted from fe80::216:cbff:febd:428c%bridge0/49239.
Any advice on my mal-configuration or possible sign of hardware failure or... greatly appreciated.
Thanks,
peter

I am at the latest firmware - which was already out when I bought my Extreme.
Before downgrading, I'll try to find the release notes to see what "features" I will loose
I am using the "full feature set" of my base station, channeling all traffic to my network through it. Thought (without basis) that the reeboots had to do with "load". The reboots erases logs, so next step will be setting up syslog on a different machine

Constant drop offs

Hi
Our internet drops off every 10 - 20 minutes. All the lights are on, but anything connected loses Internet. The colour of the lights never changes. We can either wait 10 minutes for it to reset itself or we reset it manually - neither are ideal. We have one of the black hubs - homehub2 I think. We've unplugged, reset, changed the filter - anything else we can try?
I raised a fault on Sunday and still haven't heard anything surprise surprise. Raised another call today but not expecting a response. I'm pretty sure the service we are getting isn't normal.
Any suggestions gratefully recieved.
Thanks.

There are known problems with the hh2. http://forumhelp.dyndns.info/hardware/hh2/hh2_issues.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Constant Drop of 3G Network!

Hi there,
I've had many problems with the network and was looking to see if everyone had the same issue or it was just me. I've updated my OS to 3.1.3 but what happens is, is that 3G constantly seems to turn off every 2 minutes or when I am sending a lot of traffic (using the web or sending messages). This is really starting to frustrate me and none of us should be forced to switch to EDGE.

I was wondering if this is the most common problem, because literally just today this started happening to me, and not just dropping off of 3G but also off the AT&T network.
It keeps attempting to reconnect and will do so for a while as long as the phone is in stand by mode, and will also connect to the Edge then drop off again the minute I go to use either of them.
When I turn it back off it will furiously search causing my monitor image to shake, which Im assuming means its trying pretty aggressively to find a signal.
In case it help diagnose anything what I was doing when it failed: Listening to local radio on an app, exited the app to respond to a text then go no service. Did a soft then hard restart to no avail.
Thanks!

Constant Dropped Frames While Capture.

Hi
I have FCP 5 and a Sony Handycam DCR - HC19E (PAL). I'm always having dropped frames when trying to capture the video and don't know what to do.
Any help much appreciated.

You appear to be capturing HDV using a single FW port.
Is that correct?
Are you capturing to the internal HD or an external FW drive?
There is no way to add a second FW bus to a Mac mini, so there will be issues.

70% drop in speed and constant dropped connection

Been on Infinity2 since October, BT's estimate for my line is 58 to 76mbs as im 300m from the Penistone, Sheffield Road exchange. Up until Xmas i was getting 74-75mbs d/l and 17-18mbs u/l with 5-15ms ping in speedtest, now i'm getting 24 d/l 2.9 u/l and 50+ ping, the connection is slow and it drops approx 20 times a day. I can no longer watch streams, HD videos and gaming(the reason i got Infinity) is impossible as the lag is horrific and the drop offs finish it off, even web pages with pictures can take forever to load, the pics load gradually like back in the dial-up days.
BT Wholesale now gives 24.5mbs d/l 2.9 u/l and says the max for my line is 25.11mbs so what happened to the 58-76mbs i was quoted and the 75mbs i was actually getting?
It all seems to start since the latest firmware 4.7.5.1.83.8.130.1.17 (Type A) was installed, it was rock solid until then, now it feels like my speed and bandwidth have been heavilly capped to the point the service is not even good for web browsing as many pages time out.
The event log is now filled with IN: BLOCK [16] Remote administration (TCP 222.186.62.66:6000->109.158.116.58:22 on ppp1)
i thought it might be due to the storms around xmas but a month on and some googling im realising im just 1 of many with these problems, has anybody managed to get the problems solved?
To Infinity and back down to Earth in flames.

FAQ
1. Best Effort Test: -provides background information.
Download Speed
24.41 Mbps
0 Mbps
25.14 Mbps
Max Achievable Speed
Download speedachieved during the test was - 24.41 Mbps
For your connection, the acceptable range of speedsis 20.11 Mbps-25.14 Mbps .
Additional Information:
IP Profile for your line is - 25.14 Mbps
2. Upstream Test: -provides background information.
Upload Speed
2.91 Mbps
0 Mbps
20 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 2.91Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

Slow speeds/constant drop outs

Hi,
I have been having a lot of problems with my BB speed for the last few months. I have generally lived with it, but now its getting difficult to do anything including online gaming using Xbox Live.
Sometimes the speeds are quite healthy, then suddenly drop very slow, router disconnects from the Internet, reconnects, slow speeds, speeds up, slow down, etc etc etc. Its not a quick cycle, sometimes its OK for most of the day.
Every now and then, some websites wont want to load at all. I have to reboot the router (sometimes have to restore to factory settings) before anything starts to work. I get similar issues to the Vision box.
I have tried a few different routers (all HH3) - version a and b. The only way the web starts working for the longest periods is when I have done a factory reset of the routers.
I have also noticed that the ping is generally quite high (100ms+). Usual ping rate of around 183ms.
Can anyone suggest a way to fix this long term? My K/D ration on MW3 is getting heavily screwed!
Thanks all.
Solved!
Go to Solution.

the usual request for information
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Swapped From Time Capsule TO Airport Express - Constant Drop Outs

I recently switched my main network from Time Capsule to my Airport Express so I could play music etc... But since then every few hours I'll get an error saying the Time Capsule can't connect, then maybe 20 minutes later both the Airport Express and Time Capsule eventually start flashing yellow... If I leave it all overnight it just seems to fix itself or if I turn it off/on it all fixes itself... I have always had strange issues with Airport Express even one I had 2 years ago... But Time Capsule when I bought it I never had any dramas, the only reason I switched is so I could listen to music wirelessly... Are there any settings in Airport Express that I would need to look at? And also do I need to update any of my settings in Time Capsule to make it work better with Airport Express?

These are the logs if there is a guru out there who can see an issue would be much appreciated!
Jun 26 04:41:49 Severity:5 Initialized (firmware 7.3.2).
Jun 26 04:41:51 Severity:3 No Address for NTP server time.apple.com.
Jun 26 04:41:51 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jun 26 04:41:51 Severity:5 Rotated TKIP group key.
Jun 26 04:41:55 Severity:5 Internet Configuration leased -- host <10.1.1.2/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain
Jun 26 04:42:00 Severity:5 Associated with station 00:1c:b3:74:eb:01
Jun 26 04:42:00 Severity:5 Installed unicast CCMP key for supplicant 00:1c:b3:74:eb:01
Jun 26 04:42:06 Severity:3 No Address for NTP server time.apple.com.
Jun 26 04:42:08 Severity:5 Associated with station 00:1f:f3:c3:3c:6a
Jun 26 04:42:08 Severity:5 Installed unicast CCMP key for supplicant 00:1f:f3:c3:3c:6a
Dec 05 00:16:00 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +13977217 seconds).
Dec 05 00:16:09 Severity:5 Rotated TKIP group key.
Dec 05 00:17:36 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:17:37 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:19:00 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:19:00 Severity:5 Rotated TKIP group key.
Dec 05 00:19:26 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:19:26 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:25:04 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:25:04 Severity:5 Rotated TKIP group key.
Dec 05 00:28:17 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:28:17 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:31:34 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:31:34 Severity:5 Rotated TKIP group key.
Dec 05 00:32:47 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:32:47 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:33:12 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:33:12 Severity:5 Rotated TKIP group key.
Dec 05 00:34:16 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:34:16 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:34:47 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:34:48 Severity:5 Rotated TKIP group key.
Dec 05 00:35:25 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:35:25 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:36:01 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:36:01 Severity:5 Rotated TKIP group key.
Dec 05 00:41:24 Severity:5 Internet Configuration leased -- host <10.1.1.6/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain
Dec 05 00:42:20 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:42:20 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:43:45 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:43:46 Severity:5 Rotated TKIP group key.
Dec 05 00:44:01 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:44:01 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:45:40 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:45:41 Severity:5 Rotated TKIP group key.
Dec 05 00:45:49 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:45:49 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:46:15 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:46:16 Severity:5 Rotated TKIP group key.
Dec 05 00:46:24 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:46:24 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:47:08 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:47:08 Severity:5 Rotated TKIP group key.
Dec 05 00:47:16 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:47:16 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:48:10 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:48:11 Severity:5 Rotated TKIP group key.
Dec 05 00:48:25 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 00:48:25 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 00:49:57 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 00:49:58 Severity:5 Rotated TKIP group key.
Dec 05 01:04:36 Severity:5 Associated with station 00:21:e9:03:77:f7
Dec 05 01:04:36 Severity:5 Installed unicast CCMP key for supplicant 00:21:e9:03:77:f7
Dec 05 01:05:05 Severity:5 Disassociated with station 00:21:e9:03:77:f7
Dec 05 01:05:05 Severity:5 Rotated TKIP group key.
Dec 05 01:09:29 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56611.
Dec 05 01:09:31 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56612.
Dec 05 01:09:31 Severity:5 Connection accepted from [fe80::21c:b3ff:fe74:eb01%bridge0]:56613.
Dec 05 01:10:34 Severity:5 Internet Configuration leased -- host <10.1.1.6/255.0.0.0> gateway <10.1.1.1> dns <10.1.1.1> wins lease <3600> domain

Flickering, constant dropped frames, and missing preview in FCPX

I'm working on a project, but I'm getting really bad performance problems. When I play a video, from the timeline or from the event library, I get really bad flickering, or just a black preview area. I've tried quitting and restarting the application, restarting the computer, deleting preferences, and lots of tweaks in the preferences. The only third party plugin I have active is Stupid Raisins Slide Pop. I'm working on a new 27" iMac, quad core 3.4 GHz i7, 8 GB RAM, Geforce GTX 680MX graphics, 1 TB 7200 RPM hard drive. I'm working with proxy media right now. The original files are 1080p24 H.264, but the proxy files are generally under 100 MB, and Blackmagic (a disk benchmark utility) says the sustained read speed is 120 MB/s, so it doesn't seem like that's the problem (and shouldn't it fail more gracefully?). OS X is fully upgraded (10.8.3), as is Final Cut Pro X (10.0.8). The disk is only about 15% full. I'm not sure what other steps to try.

So after thinking more about it I believe I have narrowed down the issue and that is "bad timing". Part of my issue was that I updated to 10.0.6 last night as well as added in 2 new 3tb drives into my drobo. This made it harder for me to narrow my issue. Assuming 10.0.6 is fine, that means that the Drobo would be my problem. After consulting Drobo Support, I have discovered that when adding new drives to a a Drobo the system needs time (lots of it) to re-allocate and index the previously loaded content. So the footage on the Drobo needs time to be moved and placed onto the new drives. Unfortunately this was never explained, nor was there any sort of progress bar to show that this was happeneing.
In short this means I was trying access my Drobo (where my content is stored) WHILE my Drobo was reallocating and moving that content around internally among its 4 drives. I would like to say this is the exact answer for what has been happening but unfortunately until it is done "allocating" (which Drobo estimates to be 24-36 hours) I will not be able ot fully test this theory.
Just thought i'd post an update for anyone else who ever gets stuck on Drobo related questions.

Why does Airtunes Drop Frequnetly under Tiger?

After having sifted through the last week's worth of posts to this forum, I find that I'm having a problem that many others are also having, and that it has yet to be solved. I'm posting yet another thread on this topic, hoping that Apple will take notice.
Since upgrading to Tiger, I've had a bad experience with Airtunes frequently dropping out. Sometimes it resumes playing after a few seconds, sometimes it doesn't. Sometimes disconnecting from my wireless network and then reconnecting fixes the problem, sometimes it doesn't. As far as I know, everything is up to date:
Mac OS X 10.4.7
iTunes 6.0.5 (20)
Apple Base Station v6.3 (that's the firmware)
Software update gives me weekly updates too, so my Airport software should be current (how does one find the version number for this?). This problem also ocured under firmware 6.1. A hard reset of the Airport Express did not fix the problem either.
The strangest symptom that I experience is when Airtunes drops out and I try to deselect my speakers in iTunes. It just hangs and I get the dreaded spinning beach ball. After 2 or 3 minutes it finally deselects. Sometimes if I reselect the speakers, Airtunes resumes working. But other times it just seems dead.
While all of this is going on, my internet connection through the APExpress is still ok.
Airtunes worked flawlessly for me under Panther. So I'm fairly sure that the problem arose when I switched to Tiger.
Anyone know how to solve this problem (other than downgrading to Panther)?

Okay, I've read the posts in this thread and think I might be able to contribute.
My set up is an Airport Extreme Base, with two Express's. I'm new to all this WiFi stuff, and have built this system adding each component over the past two years. So, frequent droping out has also been a problem with my setup. Yet (fingers crossed) i think I got things working pretty well with, ahem, (almost) no drop outs in days.
1. First suggestion is this link.
http://www.macgeekery.com/hacks/hardware/optimizingairportconnectivity
It basically talks about channel switching the Extreme Base Station and how to find out who else might be using that channel. With hints for advanced software from Apple (and where to get it) that I did not have, that helped me monitor signal strength and other neet learning tools.
2. I purchased airfoil recently (great software IMHO), and in the troubleshootong section it talked about how any 802.11b hardware (like my 867 Tibook) automatically down throtles your network from a potential 54 mbps to 11mbps. Now I'm not real versed on what sort of thru put you need to stream this music stuff, but 11mbps probably is not enough for two consecutive streams (w/o constantly dropping out). I have not heard of this potential problem disscussed ANYWHERE else.
3. One of my signals has to travel down a long hallway to reach the Express & speakers, 50 feet, and the signal would always stop when (it seemed as though) I would walk down it. My body seemingly disrupting the signal.
This has seemed to dimminish after my last (#4)suggestion. A house full of people would (i think) kill any signal(s) no matter how strong the signals are.
4. Upon messing around with the settings in the Airport Administrator Utility,
i accidentally had it set to 25% of its potential Transmitter power (under Airport-->Airport Network -->Wireless Options. That fixed alot, boy I felt stupid.
So, these may be things worth looking into. In addition, I have a couple of ?'s.
1. what is the multicast rate? it's under Airport-->Airport Network -->Wireless Options also. what do ya'all have it set at?
2. Would WDS have a positive signal strength effect with an Extreme Base Station and 2 or more Express stations.
I have never run any WiFi under panther, but have had constant drop out issues under tiger until recently (who knows, maybe they'll return)
Goodluck all !!!!
GG-01
PowerMac Dual 2.0 (last rev.) Mac OS X (10.4.7) Ti Book 867

How does LabView 8 handle Ring constants?

Hi all,
This is probably more for NI guys, but I am wondering how LabView 8 handles text rings? In the past, constants dropped into a VI that are of type "enum" will be updated when the typedef is updated, however, ring text constants will not. Has this changed in LabView 8?
Thanks,
Jason

Part 1 of 2
Hi Chris,
Please forgive me for differing on this point but you should have written
When a control is strictly typed it will force all [front panel] instances to be identical to the strict type definition and update all of the text constants.
The "strict" part only takes care of the appearence and those changes only affect instance were they are seen by a user. The strings associated with the enum do not affect block diagram constants.
The attached image and zip illustrates that the representation of an enum and a ring a very different. An enum has the defined strings "hidden" in the wire and the numeric value can only be one of the valid indexes of the defined strings. In this example I have shown three different constructs that illustrate the fundemental difference between rings and enums.
1) Case Structures - An enum driven case will pickup the valid choices as defined by the enum's definition. A ring does not carry this info in the wire so it is NOT possible to label the cases to match the ring. This brings up another compliation. If the case structure does not have a default case defined there must be a case for each possible selection value. The strings of an ring can be defined at run-time. Is LV supposed to re-compile the case structures code every time the ring is re-populated? In the case of an enum driven case, this is not an issue because enums that are used in a VI that is running or reserved to run can not be editied.
2) The "Format into string" can pick-up the valid enum strings by decoding the type descriptor of the enum wire. This is not the case with a ring because the ring is just a number.
3) The "Flatten into string" function will return the type destriptor of whatever is wired to it. The typed descriptor contents of a enum shows that every valid selection for that enum is defined in the enum wire. Please note that the type descriptor for a ring has no information about any strings.
End of part 1 of 2
Ben
Message Edited by Ben on 10-15-2005 10:41 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
ring vs enum.JPG ‏78 KB

HELP! I pad plugged in all nite only shows 65% charged and dropping like a stone even though still plugged in. I am in London. Where can I get help?

HELP! I am in London and my iPad is plugged into wall via adapter and cords bought from Verizon who sold me the I pad.
It does not show it is charging
It sometimes says "not charging"
it is plugged and % is dropping like a stone. HELP!

Go to the home screen on the iPad. Double click the home button and where all the app's come up below, hold down on one and then proceed to press on the minus' to delete them from multitasking. Don't worry, your not deleting the actual apps.
That should clear up the 'not charging' business, and the constant dropping. You probably played some big 3D games or watched movies and didn't exit them properly (anything you exit automatically goes into multitasking) thus keeping them open in the background.
Make sense or not working?

Constant drops

Similar Messages

Maybe you are looking for