Constant "Error" Audio Sound when I open Quicktime

Hi,
Every single time I open a .AVI File in Quicktime I get a constant and repeated "Error" audio sound from Windows. There are no pop-up error messages or any other indication of what Quicktime is doing that Windows does not like....except for this constant and repeated "Error" audio sound from my PC.
It is obvious Quicktime is doing something Windows does not like.,...but I have no idea what. Can anyone help clue me iin on what the problem might be?
Any help would be greatly appreciated. This is driving me crasy...!!
Thank you.
Rich

Have you tried completely uninstalling and re-installing the current version of QuickTime?
You could also see if there's any related error messages in the Event Viewer which might help to pinpoint what the problem is.
Start > Programs > Administrative Tools > Event Viewer

Similar Messages

  • HT3964 I had Problem in Optical Drive Open Sound When I Open My Imac

    I had Problem in Optical Drive Open Sound When I Open My Imac

    You need to supply more details and information about your issue...
    Any Error messages or Alerts...
    What Troubleshooting steps have you tried and what were the results.

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    PACE is a rather crappy copy protection software used by the following;
    Antares
    Melodyne
    Cycling 74 Max/MSP/Jitter
    iZotope oZone
    Line6 POD Farm
    McDSP plug-ins (some software purchases include a green iLok key)
    MOTU
    Overloud
    Pro Tools
    Serato
    Virtually all Digidesign (RTAS and TDM) plug-ins
    Virtually all Waves Products
    So if you have any of there, they might be the cause of your problems.
    Allan

  • I get an audio sound when my S5 connects to a wifi source.  How do I stop the sound?

    I get an audio sound when my S5 connects to a wifi source.  How do I stop the sound?

        Let's see if we can get that notification sound off treecastle! Please try going into Settings> Sound> Notifications> select Silent> Apply. This should get rid of that notification.
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Why does the "alert" noise sound when I open applications?

    When I first got this mac, it did not sound when I opened applications, so it's definitely not normal.
    I also do not think that this is a type of setting that can be changed, and if it was, I surely did not set it (and nobody else has access to my computer)
    I don't know if this is a virus?

    Hi,
    Not quite the same issue as yours... But I sometimes get the Alert sound when closing Multiple Windows...
    What I do is simply Log Out and then Back In again and it's gone...
    ( I did Bug Report this to Apple Months ago... )
    Cheers,

  • Whats the funny and ugly sound when I open safari in OSX Lion?

    what's the funny and ugly sound when I open safari in OSX Lion?

    what's the funny and ugly sound when I open safari in OSX Lion?

  • MacBook Pro 2012 hinge problem with single click sound when i open it

    when i go to sleep and shut my macbook off and close the screen next morning i open my screen and i hear a single click noise??
    im paranoid ita a brand new macbook its not a hard drive fail it just a single click sound when i open it to turn on
    and heres a video of the hinge is this is whats causing the single click sound? http://www.youtube.com/watch?v=wEUt2p783nA

    I have this problem too with my Mid-2012 MBP non-retina. The screen would click once, after being left for a long time, and would be fine after that, until you close it and re-open it again after a long time. It is especially loud in the morning so I think it is temperature dependent. Happened about 3 months after buying. I took it to Apple. First time they replaced the entire screen. They had to since that is the only way to replace the hinge. When I got it back, the screen still clicks. Took it back to Apple again. Second time they just tightened the screws securing the display with the unibody. When I got it back the second time, the screen still clicks. Took it back to Apple again. The third time they replaced the entire screen AGAIN! When I got it back, the problem was fixed for 2 days, then the screen started clicking again so I'm back to square one. I'm wondering whether I should take it to Apple the forth time, but then again, they've already replaced the screen twice which didn't work so I'm not sure what more they can do. It's either this is normal, which implies the screen hinge is really badly designed or the clicking has nothing to do with the screen at all.

  • "Loading. . .", then "Switching. . ." when I open QuickTime Player

    I just installed updates on QuickTime Player 7. I don't know if this is a problem, but when I open QuickTime, it reads "Loading. . ." then "Switching. . ." and then seems to freeze on the "Switching. . ." screen instead of going to the QuickTime page that has links to videos that can be downloaded. Also, if I go to File > Open Recent>, it does not show recently viewed files. Is there a problem with this software? If so, please give advice to troubleshoot.
    Thanks,
    Dave

    The same thing is happening to me. I tried uninstalling and reinstalling and it doesn't work. I'm not concerned about recently viewed, but am about Quicktime minimizing after "Switching..." and isn't allowing me to go to it's home window. Anyone know how to solve this problem?

  • I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

    Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

    Hey there Mambo822,
    It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
      iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • No sound when exporting to quicktime

    Hi,
    I made a presentation in Keynote 08 and recorded some audio on top of it. But when I export the presentation to quicktime the audio is missing.
    How can I export the presentation with the audio. I checked export with audio.
    Thanks

    I found a workaround if you have Quicktime PRO. If you don't, and have mission critical material you need to fix, the $29 you slap down for QTP will fix it:
    1. Export the file as usual, with audio checked for export.
    2. Open the file in Quicktime and make sure the Audio Control is showing (View..Show Movie Properties...Presentation...Movie Controls) (boy they hide that one!)
    3. If you have a number of audio files, one per slide, open the folder with those - or if you have recorded audio by narrating into keynote, right click on the keynote file and choose 'Show Package Contents' and find the narration audio files)
    4. On the movie controller on the right, choose Slide 1
    5. Open audio file 1 in another quicktime window. Choose Edit..Select All..Copy (while that audio file is active in quicktime)
    6. Click back on the slideshow Quicktime window and choose Edit..Add to Movie
    5. On the movie controller, click slide 2 ... choose the 2nd audio file ... and repeat until all slides done.
    6. Save the Slideshow file when done.
    Only took 5 minutes and I had a fully working Quicktime movie file - and lucky I had QT PRO!
    Rod

  • 8230 Flip - want it to make a sound when I open it and close it.

    This is purely a personalization question, but the last clamshell phone I owned was Windows-based and I was able to customize the sounds that it made when I opened it and closed it.  Pretty minor and geeky, but I loved having it make the old school Star Trek communicator sound when I flipped it open..."Kirk here".  This phone is light years ahead of my old Windows phone, so I figured it should have this feature.  Does anyone know how to assign sounds to these actions?

    Briansyddall wrote:
    Make sure mute switch is not set to red on the side of ipad. Also in control panel make sure half moon is not on for donot disturb. Bsydd uk
    Many thanks for your response.
    MY problem is now solved.

  • Why do I keep getting an error message (42404) when I open my itunes?

    I have tried numerous"fixes" for this and still get the same error message every time I open the itunes app.
    I have re-downloaded and installed the latest version of itunes.   I have re-installed Quicktime and then I tried to
    install an older version of Quicktime that someone said would fix it, with no success.  Itunes just keeps opening
    with the same error message: A required itunes component is not installed. Please repair or re-install itunes. (-42404)
    I'm afraid to connect my ipod Classic to it because I don't want it to mess up my music folders. 
    Any help with this issue would be appreciated.
    Regards,
    Len

    I'd like to thank all those that responed to my question.   Apple has lousy support and this forum is even worse.  Have a nice day and thanks for nothing.

  • SOFFICEINTEGRATION143 Error in ISR when trying opening adobe form layout

    Hi,
    I'm running into SOFFICEINTEGRATION143 error when trying to open any adobe form layout in the ISR secenario definition. Can anyone let me know why I'm getting this error and what the solution is?
    FYI, I'm using SAP gui version 640 Final Release, File Version 6404.4.14.2987, build 781208, Patch level 14
    I do have Adobe LifeCycle Designer 7.1, Reader 8 and MSOffice 2002.
    Thanks in advance.
    Giri.

    Hi, Giri. Did you solve your problem?
    I think I m having similar problem. I installed Sap Gui 7.1, SAP interactive form and Adobe LiveCycle Designer ES.
    I was able to open abode form layout in the transaction SFP. However, after I upgraded my Adobe to 7.0.9. (previous version is 7.x.x). I get the error SOFFICEINTEGRATION143 when try open again.
    I uninstalled Adobe 7.0.9 and installed Adobe 8.1 but it still get the same error.
    Can anyone help?
    Thanks in advance.

  • Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

    Hi All
    Exchange Server - 2013 CU2 (Windows 2012 Standard)
    AD Server - 2003 R2 SP2
    exchange-svr01.domain.com - internal name
    mail.company.net - external name
    When users opened Outlook 2010, they will encountered
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)"
    I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
    The RPC/HTTP test completed successfully.
        Validating the certificate name.
         Certificate name validation failed.
         Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
    Testing SSL mutual authentication with the RPC proxy server.
         The test passed with some warnings encountered.
    The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
     please help.

    Hi PS CL
    [PS] C:\Windows\system32>Get-OutlookAnywhere
    RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
    ServerName                         : exchange-svr01
    SSLOffloading                      : True
    ExternalHostname                   : mail.company.net
    InternalHostname                   : exchange-svr01.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
    Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 712.22)
    Server                             : exchange-svr01
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
    Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
    Identity                           : exchange-svr01\Rpc (Default Web Site)
    Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
    ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 8/17/2013 10:14:55 AM
    WhenCreated                        : 6/25/2013 1:47:50 PM
    WhenChangedUTC                     : 8/17/2013 2:14:55 AM
    WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
    OrganizationId                     :
    OriginatingServer                  : ADserver.domain.COM
    IsValid                            : True
    ObjectState                        : Changed

Maybe you are looking for

  • Trying to understand the details of converting an int to a byte[] and back

    I found the following code to convert ints into bytes and wanted to understand it better: public static final byte[] intToByteArray(int value) { return new byte[]{ (byte)(value >>> 24), (byte)(value >> 16 & 0xff), (byte)(value >> 8 & 0xff), (byte)(va

  • Invalid Path for target file, check if connector is deployed correctly

    Hi all, I've got a tricky problem over here: we are using OMB scripts for generating simple extract mappings that just copy data from an oracle source table to a flat file on a directory. Up untill now ( with version 11.1 ) this did not pose any trou

  • Editor suddenly works differently

    Cursor no longer gives preview of area to be affected when using dodge or burn tool. Why not? How do I go back to way it was?

  • MacBook Pro (17-inch, Late 2011) Yosemite Freezing and Slow

    Problems all of a sudden with a flawless MBP. I am getting hard Kernal Panic restarts using mail, safari, text edit (all up to date) in yosemite. Auto-Correct typing is so slow it is actually pausing for seconds at a time before catching up. (Even wh

  • Cisco Cat 500 Express deficiency

    I have heared complaints about the Cisco Cat 500 switch. When using the Cat 500 with AP1200 and 7920 IP phones, the phones do not roam from AP to AP. Also I have found out that the Cat 500 will not relay dhcp request to a server on a seperate vlan fr