Constant Firewall messages

I just did an upgrade to 10.6.2
On checking Console, I see hundreds of messages like this:
23/12/2009 16:51:37 Firewall[109] Allow smbd connecting from 10.0.0.5:49649 to port 139 proto=6
and
23/12/2009 16:55:14 Firewall[109] Stealth Mode connection attempt to UDP 10.0.0.14:64140 from 10.0.0.2:53
Is this something to worry about?
I'm not sure what these mean and if it's a problem? Is someone hacking into my system?

+23/12/2009 16:51:37 Firewall109 Allow smbd connecting from 10.0.0.5:49649 to port 139 proto=6+
This is the samba (windows client) network (lan) software trying to connect to your Mac's netbios
port to determine the machine's identity. Samba is included with SL.
+23/12/2009 16:55:14 Firewall109 Stealth Mode connection attempt to UDP 10.0.0.14:64140 from 10.0.0.2:53+
This is your router (or modem/router combo) DNS (Domain Name Server) Service (on your router)
trying to communicate with your Mac and your SL firewall is blocking it. Don't worry though, when
your Mac needs DNS Services, it will ask for them. Actually it's probably your IP's nosy Web Server
that's trying to connect to your Machine, as all DNS requests normally get channeled from your
IP through your router. In other words, don't worry about it. All that means is your Snowie
firewall is doing its job keeping out some nosy server, most likely belonging to your IP provider.
Kj ♘

Similar Messages

  • I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.

    I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
    I am using Windows 8.

    Hi,
    Which version of Photoshop Elements are you trying to install?
    Are you installing from DVD or a download?
    If DVD, make sure you are using the Windows one, not the MAC one.
    What device are you trying to install on?
    Does your system meet the required spec?
    Are you on Windows 8 or Windows 8.1?
    Brian

  • I am unable to install the latest update to iTunes, I get constant error messages, even when I attempt to uninstall iTunes completely and start afresh, iTunes is still listed in my program files on my hard drive and the shortcut is still on my desktop!?

    Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing

    Hey there Mambo822,
    It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
      iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    Please see the subject line thanks
    I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?

    If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor.  Have the case number for the promised refund available.
    If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device.  Buying storage in iCloud does not add space to the device which is what you need.
    You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
    HTH

  • Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    PACE is a rather crappy copy protection software used by the following;
    Antares
    Melodyne
    Cycling 74 Max/MSP/Jitter
    iZotope oZone
    Line6 POD Farm
    McDSP plug-ins (some software purchases include a green iLok key)
    MOTU
    Overloud
    Pro Tools
    Serato
    Virtually all Digidesign (RTAS and TDM) plug-ins
    Virtually all Waves Products
    So if you have any of there, they might be the cause of your problems.
    Allan

  • I am getting a Firewall message that says...

    This one is for the PRO's.    I wonder if anyone can help me with this.
    I am getting a Firewall message that reads:
    The service "(Common Internet File System (CIFS))" is starting on your Mac.
    Application:  sbin > launchd
              Port:   445 (Common Internet File System (CIFS))
    It also says:  if you don't change firewall settings, the firewall wil block connections from other computers to this ervice on your Mac.
    What does this mean?  I never got this before.
    Thank you in advance for your help!

    According to this,
    Well known TCP and UDP ports used by Apple software products
    port 445 is for a Microsoft domain server.  So it looks like some microsoft software is trying to "call home" for some reason.
    If I saw that on my machine I would block it or not let it through.  I don't permit stuff communicating with third parties unless I am aware of what it is and why it is happening.
    Of course, out of curiousity I would also google "Common Internet File System" to see what that means in case I decide to let it through.
    FWIW, one of those google search hits found this.  So you know what microsoft stuff you are using and thus you have decide whether to let it though.  YOu could be concervative, and block it and see what "breaks" if anything.  You could always decide to unblock it later if necessary.

  • Firewall message sharing from Organizer to Facebook

    Firewall message in Elements Organizer when trying to share photos to Facebook.   Have used it many times in the past with no problems.

    Me also.  In the past no problem.  Went to use it today, and it won't work.  It states I either am NOT connected to the internet, which I am; or the firewall is preventing, which it isn't.  This is very frustrating....  From the posts now, I see, its a photoshop/facebook problem....I hope they fix it FAST !!!

  • I cannot send docs via email constant error message.

    Whenever I try to send a document via email i get a constant error message. Any ideas?

    Very difficult to help when you don't provide any information.

  • MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

    MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

    Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
    The latest supported version for your os is '''3.6.27''' , you can download it from:
    http://www.mozilla.org/en-US/firefox/all-older.html
    1. Download a 3.6.27 copy of the Firefox from the above link
    2. Trash the current Firefox application to do a clean (re-)install.
    3. Install the new version that you have downloaded(3.6.27)
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
    see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Norton Personal Firewall messages at startup won't go away

    I used to have Norton Personal Firewall (NPF) installed on my G5 iMac. For some time now, whenever I start up, I get two messages related to NPF. The first one says that I have installed new system software and need to restart my computer. The second one says that NPF "cannot launch the kernel extension" and that "some features of NPF may not be enabled."
    I have been just ignoring and closing both of these messages, but recently I have been doing a cleanup, deleting files I don't need any more, and when I recently upgraded my Norton Antivirus software, I decided that NPF was superfluous, since Mac OS Leopard (10.5.5) has its own firewall. I tried to use the Norton uninstaller to delete the program, but the uninstaller does not list NPF in its list of applications to uninstall. I have done a Spotlight search for any NPF-related files and have also deleted all my old System 9 folders. I'm still getting these messages, though. Has anyone else ever seen this problem, and do you have any suggestions?
    Thanks!

    Thank you very much, but this is an older version (1.0.2) of the Symantec Uninstaller that came with NAV (1.1.1). As I mentioned, when I open Uninstaller and it searches for installed applications, Norton Personal Firewall does not show up in the list. So I can't use the Uninstaller to uninstall NPF. But I appreciate your attempt to help me.
    I wonder if somehow there are still some "residual" files remaining from NPF? If so, I have no idea how to find them, since they don't show up with a Spotlight search. Maybe it is something that is somehow embedded in the System?

  • Illustrator CS6 Constant Error Messages

    Hi guys,
    I purchased CS6 about 5 months ago now. And for the last 3 months I have been getting constant Error 16 messages when trying to start up the program. It has become a vicious cycle of uninstalling, deleting all my adobe products, then deleting all of my adobe file folders under the C: drive, App data folders, and my User folders, then having to reinstall everything. I have been doing this consistently for 3 months and it's getting to the point of seriously disabling my workflow and costing my business way to much time. I even now today had a new problem arise. When I reinstall Illustrator and enter my serial number during the installation process it accepts it and installs fine. But when I open up Illustrator it prompts me that my trial has expired and to enter in a serial number. So I enter in my serial number again and then it works for a bit. If I close the program and reopen it literally 5 minutes later it Error 16 again.
    I'm running  a Dell Inspiron 15R Intel i-7 processor, 8GB RAM and Windows 8. Does anybody have any ideas on why Illustrator continues to crash and/or Error 16 almost every other day/week?
    Thanks.
    Here is the Error:16 message
    Besides the Error 16 message I am also still having trouble with the Activation and serial number recognition of Illustrator. I went to open Illustrator up today and I got this message:
    It says "Activation Failed". The message is saying Product Activation is required to use this product. You must have a working internet connection to activate this product. I have full strength internet connection and I have already activated Illustrator when I did a fresh install on 12/12/13. First is was the Error:16, then it was the trial problem, and now This. What is going on?
    My serial number is clearly validated and activated but the very next day I try to open Illustrator I get the message in the screenshot above. How can I fix this? Thanks.

    Jeff A Wright,
    Thank you for your support on this. However, I am running into some problems for completing the steps listed on the help page you listed. In the SLStore the deselection of "Read-Only" is not being applied. I deselect that attribute and click Apply and then Ok. If I right click again on the folder the "Read-Only" attribute is still checked.
    Also for step 3 Set Permissions I cannot change any of the permissions for the SLStore even though I am logged in as the Administrator. The PCD folder does not have an Owner tab and I cannot change the permissions for this folder either.
    What can I do to fix the file permissions if I am having the problems above?
    Thank you.

  • Firewall Message with Airtunes and AppleTV

    I am using iTunes 8.02 on a Mac running Tiger 10.4.11. I like to stream my music to my AppleTV (which is running the most recent version of the firmware). My wireless router is an Airport Express (running the latest v6.3 software).
    In iTunes, I see a drop down menu showing me my AppleTV. When I select it, I see a pop up warning message:
    "Your Computers firewall settings will prevent you from using Airtunes.
    Please check your Firewall settings
    Learn More Ignore Open Firewall Settings"
    I click ignore and it works!!
    But Why am I getting this message?
    I have followed the instructions in:
    http://support.apple.com/kb/TS2278
    I have even disabled "Stealth Mode" in Tiger's firewall suggested in the forums.
    What am I missing?
    Why do I still get this warning message (yet it works when I click Ignore)?
    Rob

    Then I would be wireless from G5 and AppleTV to the internet. But I would loose the AirTunes / Express capability?
    You could only have one function at one time. (So you can't use your G5 and Apple TV on the internet while using AirTunes) as (AFAIK) the AirPort express can't be used as a 'wireless access point' at the same time as AirTunes.
    To try and summarize
    If you want to use AirTunes and have your computer and Apple TV connected to the same network with internet connectivity at the same time you can:
    1. Purchase an AirPort Extreme base station.
    2. Connect your cable modem to the AirPort extreme via ethernet, set up a WiFI network and connect your G5 and Apple TV.
    3. Join your AirPort express to the AirPort extreme network via client mode.
    http://docs.info.apple.com/article.html?artnum=108038#6

  • Firewall messages

    Hi All,
    I'm really new to firewalls, I have configured one using CCP and the basic firewall wizard with medium security. I just have my laptop plugged into the LAN port and I noticed a couple weird logs that I want to ask about when surfing the web, and retrieving outlook emails.
    I'm getting 4 main messages:
    004528: Jul  6 11:26:46.528 MDT: %APPFW-4-HTTP_DEOBFUSCATION: Deobfuscation signature (15) detected - session 192.168.0.2:64657 74.125.225.121:80 on zone-pair ccp-zp-in-out class ccp-protocol-http appl-class ccp-http-blockparam
    004620: Jul  6 11:30:21.596 MDT: %APPFW-4-HTTP_DEOBFUSCATION: Deobfuscation signature (16) detected - session 192.168.0.2:64640 74.125.225.121:80 on zone-pair ccp-zp-in-out class ccp-protocol-http appl-class ccp-http-blockparam
    004603: Jul  6 11:27:08.164 MDT: %APPFW-4-HTTP_PROTOCOL_VIOLATION: HTTP protocol violation (0) detected - session 208.38.45.167:80 192.168.0.2:64852 on zone-pair ccp-zp-in-out class ccp-protocol-http appl-class ccp-http-blockparam
    When using Send/Receive in Outlook i get:
    004630: Jul  6 11:33:39.980 MDT: %FW-5-POP3_INVALID_COMMAND: (target:class)-(ccp-zp-in-out:ccp-protocol-pop3):Invalid POP3 command from initiator (192.168.0.2:64993): Invalid verb
    Everything seems to work fine, I can send and receive emails, I can surf websites and google with no issues. Is this just logging or should I be worried about any of these messages?
    Thanks!!!
    -Chris
    More Info
    #show policy-map type inspect http
      Policy Map type inspect http ccp-action-app-http
        Class ccp-http-blockparam
          Log
          Allow
        Class ccp-app-httpmethods
          Log
          Reset
        Class ccp-http-allowparam
          Log
          Allow
    #show class-map type inspect http
    Class Map type inspect http match-any ccp-app-httpmethods (id 8)
       Match  request method bcopy
       Match  request method bdelete
       Match  request method bmove
       Match  request method bpropfind
       Match  request method bproppatch
       Match  request method connect
       Match  request method copy
       Match  request method delete
       Match  request method edit
       Match  request method getattribute
       Match  request method getattributenames
       Match  request method getproperties
       Match  request method index
       Match  request method lock
       Match  request method mkcol
       Match  request method mkdir
       Match  request method move
       Match  request method notify
       Match  request method options
       Match  request method poll
       Match  request method propfind
       Match  request method proppatch
       Match  request method put
       Match  request method revadd
       Match  request method revlabel
       Match  request method revlog
       Match  request method revnum
       Match  request method save
       Match  request method search
       Match  request method setattribute
       Match  request method startrev
       Match  request method stoprev
       Match  request method subscribe
       Match  request method trace
       Match  request method unedit
       Match  request method unlock
       Match  request method unsubscribe
    Class Map type inspect http match-any ccp-http-blockparam (id 15)
       Match  request port-misuse im
       Match  request port-misuse p2p
       Match  req-resp protocol-violation
    Class Map type inspect http match-any ccp-http-allowparam (id 4)
       Match  request port-misuse tunneling

    WAMP!
    Hi Chris, Mike here. I see the problem there. We have a section ask the expert where Julio Carvajal is answering Firewalling questions in IOS devices.
    Going back to the question, I see where the problem is. Many Websites on the internet are not HTTP compliant, what you are doing with the configuration you did with CCP is creating this AGGRESSIVE inspection in layer 7 inspection for web traffic, meaning, the traffic on HTTP may slow down or have Random connectivity issues. This is mainly because of the service policy configured inside of the HTTP inspection.
    As I can see is not only HTTP but it is extending to other protocols as well, my best advice for you is, if you are sure where attack may come from, apply a deep packet inspection to it. I dont particularly like wizzards so if you wanna get deep to a protocol it would be better if you know what you want to match.
    Leave the protocols without layer 7 inspection, they will still look at the form of the packet and make sure it is RFC compliant, custom commands (POP and SMTP) custom Methods (HTTP) may get dropped as you can see.
    Hope it helps!!!
    Mike

  • Firewall message

    I am getting a message "master is listening on .........
    Does this mean someone is accessing my computer?
    What is at risk?

    HI and Welcome to Apple Discussions...
    What application do you have open when this occurs? Is this a dialog box or audio? How do you know this is related to the Firewall ????
    If would help us to help you if you could update your profile. Please add the Mac OS X version number and which Mac you have. Thanks!
    Carolyn
    Message was edited by: Carolyn Samit

  • Bizarre FIrewall Message

    Starting up Airtunes brings up a warning dialogue that tells me my Firewall settings will prevent Airtunes from working. When I press the button to open up Firewall settings everything (including permitting Airtunes) looks right.
    If I try to go to network settings a warning dialogue appears telling me "The Settings have been changed by another application". Hitting the "close" button on the dialogue just makes the window pop up again. The only way I can leave the Network Settings window is to force quit System Preferences.
    By the way, Airtunes works fine if I just ignore the warning and play my songs.

    Same here.
    Jesdad, you might want to look into a few threads that deal with the network setting problem like these ones:
    http://discussions.apple.com/thread.jspa?threadID=1715241&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1716357&start=0&tstart=0
    Doing the lock-unlock trick saved me from the pop up but somehow my network settings are still corrupted and I get the same iTunes error messages that you describe.

Maybe you are looking for

  • Structure with min!=max without mapping

    Hi, At Message Mapping - Test Tab, we have the following error: "Mapping object  incomplete. Unable to continue execution Structure with min!=max without mapping" We did added some custom segments to the standard idoc, but we already validate the xml

  • Clickbox will not open file after published

    Good morning, I am working on a project where we are quizzing users.  They must refer to a PDF docuemnt as part of the decision making process.  I have added a click box that allows users to click to open the PDF docuement.  Of course, when I publish

  • 'GPIB Read' consumes 100% CPU (LV 7.1 RT)

    Hi, It seems that the 'GPIB Read' VI eats up a lot of cpu power if it is called with a long timeout (10000ms). In my app the GPIB stuff seems to disturb the remaining application which processes data from other sources (DAQ, ...). The H/W is a PXI-81

  • Inner Exception The provider is not compatible with the version of Oracle

    I am using the 64 bit ODP and Net 2.0 SDK in a C# program which runs standalone and is also hosted by another win32 process. When running standalone it works ok. But when being hosted by another process, I get the following exceptions thrown when i c

  • Stateless EJB 3: update / query on same ejb-method get wrong results

    I have a JavaEE application using EJB3 Stateless and DAOs with JDBC statements, simple transfer objects for data. The EJB business method update some questionnaire structure, after that query on database for new questionnaire (need for get autogenera