Constant notifications even when there's nothing to be notified of. Galaxy S5.

Ever since I updated my Samsung Galaxy s5 yesterday I have been getting constant message tones even when there's nothing to be notified of. I have restarted my phone more than enough times to know its not that causing issues.

    josh366,
This definitely seems strange that you are receiving these notifications without having any type of texts, or emails, or any other types of notifications. Since the software upgrade, have you downloaded any new apps? Let's also try to power the device off, remove the SIM card and wait for about 30-60 seconds and then put the SIM back in and power back on. Keep us posted!
ErinW_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Why, when I startup my Macbook, does it try and boot from a disc even when there is nothing in the disc drive?

    This is a frustrating problem, will I need to format and reinstall the OS? The only temporary fix is if I hold the option key and tell it to boot from the hardrive.

    I hate to be a pain, but given the considerable oddity of your situation, I think it might be helpful for us to know the exact wording of the message.
    Start up from your most recent OS X installer DVD, open Disk Utility from the Utilities menu, select your internal hard drive in the left pane of DU, click the First Aid tab in the right pane, and run the Repair Disk routine. Then quit Disk Utility, quit the Installer, and try again to sart the computer up normally.

  • 2011 model with poor battery life and always says no disk space when there is nothing on it?

    I have a 2011 Mac Book Air and have noticed that the battery only lasts a couple of hours. It also constantly says I have no start up disk space available when there is nothing really on it, only a couple of photos.

    A
    1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
    2. Follow these instructions, or these for OS X 10.8 or earlier.
    3. In the Energy Saver preference pane, uncheck the box marked
              Enable Power Nap while on battery power
    if it's shown (it may not be.)
    4. You can also try resetting the SMC.
    5. Make sure your system is up to date in Software Update.
    6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
    B
    Please post the exact, complete text of the warning message.

  • USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

    Since a few days now I get the message
    'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
    It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
    Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
    I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
    Anyone has any idea?
    Thanks
    HP Pavilion dv7 Notebook PC
    LE902EA#UUG
    Windows 7 64 bit
    This question was solved.
    View Solution.

    The solution can be found here

  • Satellite A300-PSAG8E - HDD indicator is blinking even when i do nothing

    these are my problems
    1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Upgraded BIOS to version 2.20
    OS: Windows 7 Ultimate
    Laptop: Toshiba Satellite A300-PSAG8E
    Anyone know the solutions?
    Need help please! Thank you

    > 1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    Even if you dont touch the notebook, the HDD is running and different applications access the data. The applications and processes which are running in the background would cause this blinking. Note; this is not a problem!
    > 2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Disable the stand by modem and disable the settings which disable the screen while notebook is not in use. This can be done in Windows 7 power management.

  • Database Instance Using Swap Space even When There is Plenty of Free RAM

    Hi,
    I am facinga strange issue in oracle on solaris 5.10
    Platform:solaris 5.10
    Database version:11.2.0.1.0
    Our database Instance Using Swap Space even When There is Plenty of Free RAM.
    We have 80GB of physical RAM, 32GB is set to oracle SGA_MAX_SIZE
    memory parameters:
    memory_max_target big integer 32G
    memory_target big integer 32G
    sga_max_size big integer 32G
    sga_target big integer 32G
    but still oracle is taking memory from swap even though we have enough physical memory.
    please find the top output
    load averages: 0.09, 0.18, 0.84 01:07:49
    134 processes: 133 sleeping, 1 on cpu
    CPU states: 99.4% idle, 0.4% user, 0.3% kernel, 0.0% iowait, 0.0% swap
    Memory: 80G real, 69G free, 35G swap in use, 49G swap free
    PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
    1052 oracle 13 59 0 95M 66M sleep 13:16 0.07% oraagent.bin
    10256 oracle 1 59 0 32G 835M sleep 0:00 0.03% oracle
    1227 oracle 15 59 0 78M 56M sleep 4:27 0.02% ocssd.bin
    9524 vector1 112 59 0 1704M 776M sleep 45:04 0.02% java
    988 oracle 38 59 0 119M 92M sleep 3:00 0.02% ohasd.bin
    1297 oracle 1 101 -20 453M 390M sleep 2:47 0.02% oracle
    1765 oracle 1 101 -20 32G 329M sleep 2:45 0.02% oracle
    10258 oracle 1 59 0 32G 345M sleep 0:00 0.02% oracle
    10259 oracle 1 59 0 3400K 2024K cpu/20 0:00 0.01% top
    1777 oracle 1 59 0 32G 342M sleep 1:14 0.01% oracle
    1246 oracle 6 59 0 56M 44M sleep 1:22 0.01% diskmon.bin
    1803 oracle 1 59 0 32G 514M sleep 0:30 0.01% oracle
    1215 oracle 15 59 0 71M 46M sleep 1:12 0.00% cssdagent
    1307 oracle 1 59 0 453M 390M sleep 0:45 0.00% oracle
    1217 oracle 11 59 0 81M 49M sleep 0:35 0.00% orarootagent.bi
    Vmstat output:
    $vmstat 5 5
    kthr memory page disk faults cpu
    r b w swap free re mf pi po fr de sr s3 s3 s3 s3 in sy cs us sy id
    0 0 0 53698448 73900568 20 81 32 6 5 0 1 -0 0 1 -0 2235 1447 1984 1 0 99
    0 0 0 51196160 72037552 1 13 0 0 0 0 0 0 0 0 0 2505 1403 2204 0 0 100
    0 0 0 51193488 72035864 55 380 0 0 0 0 0 0 0 0 0 2487 2143 2203 0 1 99
    0 0 0 51183856 72030176 0 0 0 3 3 0 0 0 0 0 0 2496 1370 2182 0 0 99
    0 0 0 51182648 72029112 22 117 0 0 0 0 0 0 0 0 0 2503 1408 2193 1 0 99
    $cat /etc/release
    Solaris 10 10/09 s10s_u8wos_08a SPARC
    Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 16 September 2009
    I refered the metalink document id: [ID 761960.1]
    Database Instance Using Swap Space When There is Plenty of Free RAM metalink note [ID 761960.1]
    and tried the disabling the sga_max_size and memory_max_target and memory target with all different combination but no use.
    We have one more box where same setup was configured in solaris platform but there the above memory parameters are not disabled but it is not using swap space it takes memry only from physical RAM
    Can any one throw some lights on this issue. It wopuld be great if I come to know where the exact problem
    Thanks in advance
    With Regards,
    Boobathi P

    Hi,
    I didn't say I am not using 11gr2 memory parameters I am using all the automatic memory parameters but the thinks is as per the metalink note I tried by disabling the automatic memory parameters. but that didn't help me in preventing unnecessary swap usage. So I reverted. now it is using automatic memory parameters.
    so What is the solution for this?
    With Regards,
    Boo

  • My traffic conditions dont show up on the notification even when it is turned on - ios 8

    my traffic conditions dont show up on the notification even when it is turned on - ios 8
    I have tried hard resetting. I had a similar problem with the weather but got that resolved now. Any ideas on how to fix?
    Thanks

    I'm having the same problem on my iPhone 5s. Traffic conditions are not even a option under edit, but weirdly my wifi iPad Mini Retina shows traffic conditions. I feel like I'm missing some option, but I can't figure out what it could be.

  • Dax Calculate column even when there is no record at a date

    We are creating a powerpivot model based on a table with data about worktasks of our employees.
    This is simplified our input:
    Tasknr date started dateended
    1 20140101 20140201 (yyyymmdd)
    2 20140102 20140103
    3 20140104 20140108
    Etc
    We created two measures to calculate how many tasks are opened and closed per day. That was no problem, but now the tricky part. We also want to know each day how many tasks are
    still open, even on days that no tasks are opened (or closed).
    My approach was to create a calculated column to determine how many tasks are opened up to that date and subtracted the closed tasks and end up with the tasks that are open. That
    seems to be working :
    =COUNTROWS(FILTER(Tasks; Tasks[Open]<=EARLIER(Tasks[Open]))) - COUNTROWS(FILTER(Tasks; Tasks[Close]<=EARLIER(Tasks[Open])))
    When I load this to the excel pivot I end up with this:
    Row Labels| Opened | Closed | Open not finished
    1/1/2014
            1         
    0          1
    1/2/2014        
    1          0         
    2
    1/3/2014
            0         
    1         0
    1/4/2014
            1         
    0         2
    The line with 1/3/2014 should have 1 in the column [opened not finished], but because that calculation is linked to the opendate column, not to the closed and 3/1/2014 no task
    was opened, there is no value. On days that no tasks are opened or closed there even is no line at all although there could be tasks that are still open.
    I need a mechanism that calculates the value even when there are no records
    on a particular day. Our users want to be able to view the results on any date they select.
    I have considered a second table with all the dates and calculate columns from the task-table but are there other ways to do this? I searched this forum but did not find an answer
    so far.

    Hi Jacob,
    In our company we have a standard date table that is included in all of our models. What I didn't want to do in this case was to extend that table with calculated fields to solve this issue. Alternative was to create a new date table with the calculated
    fields I needed. But I don't like that also so what I did was rewrite the sql that loaded the data into the pivot so that the measures were calculated at the load. But I am also not happy with that solution because of maintanance and performance reasons. My
    feeling is that there must be a way to solve this with only dax in the loaded table.
    Jacob's answer does exactly what you want. The DAX expression in his response is a measure which you could put in your Tasks table. You don't need to alter your date dimension in any way.
    The key to this technique is that the date table cannot have an active relationship to your Tasks table. (although you could have an inactive relationship and then you could use the USERELATIONSHIP function to make other measures easier to calculate)
    Translating Jocob's measure into something against a 'Tasks' table would looks like the following:
    =
    CALCULATE (
    COUNTROWS ( Tasks ),
    FILTER (
    Tasks,
    Tasks[Open] <= MAX ( Calendar[Date] )
    && Tasks[Closed] >= MAX ( Calendar[Date] )
    http://darren.gosbell.com - please mark correct answers

  • GRC 5.3: CUP asks to perform risk analysis even when there are no risks in request

    Hi All,
    We recently upgraded from GRC 5.3 SP13 to SP22.
    The one issue which we are facing after upgrade is that now CUP is forcing approvers to do Risk Analysis, even when there are no risks in the CUP Request, that is Risk Tab is Green.
    Previously approvers were able to approve requests without doing risk analysis, if there were no risks in the request.
    CUP used to force them to do risk analysis only when there were risks associated with requests.
    But now, it is forcing approvers to perform risk analysis, even if there are no risks, i.e. approvers are not able to approve requests without any risks without doing risk analysis.
    Please advise.
    Thanks
    Aditi

    Hi,
    Can you check if any change is made in Configuration -> Workflow -> Stage -> Approvers
    Regards,
    Claudio

  • PRI channel busy issue , even when there are no active calls

    Hi All ,
    i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
    i already replaced that card .
    please advice

    I believe that this post should be made to the Unified Communications and Video forum.
    Would please you repost to that group.
    Thanks

  • Allocated heap memory goes up even when there is enough free memory

    Hi,
    Our Java application's memory usage keep growing. Further analysis of the heap memory using JProbe shows that the allocated heap memory goes up even when there is enough free memory available in the heap.
    When the process started, allocated heap memory was around 50MB and the memory used was around 8MB. After few hours, the inuse memory remains at 8MB (slight increase in KBs), but the allocated memory went upto 70MB.
    We are using JVM 1.5_10. What could be the reason for heap allocation going up even when there is enough free memory available in heap?
    -Rajesh.

    Hi Eric,
    Please check if there is any error or warning in the Event Viewer based on the data time?
    If there is any error, please post the event ID to help us to troubleshoot.
    Best Regards,
    Anna

  • Quota dedcuting even when there is no quota

    i got this problem,
    I have a absence type A whose quota is deducting from absence type B. but even when there is no quota ,the system is deducting the quota from someother absence type i.e. C
    Kindly help.....

    thks all...........its solved .in dedcution i jus need to chose "no further assignment"
    Please Close the thread if you issue  is solved
    Edited by: Sikindar on Feb 2, 2010 11:55 AM

  • Cd icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

    icon shows even when there is no cd present. I tried ejecting it and inserting another cd and the cd gets ejected. what is the solution to this

    Jailbreaking iOS can't be discussed in this forum.

  • When there is nothing in a particular folder stop with all the activity already!

    When I open a folder that has nothing inside it, there are two places on the screen that are whirring non-stop. In the middle of the window, it keeps saying something like "exploring, blah, blah". Also, in the bottom left corner of the window, there is constant activity as well. If there is nothing in the folder, I can see that with my own eyes, I don't need the program to tell me there's nothing there every two seconds. All of that searching garbage should be left under the hood and out of sight.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

    I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
    The exact error message is as follows:
    "There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later."
    I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
    Any help you can give me would be appreciated.

    Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Maybe you are looking for