Constant Power Transition Sudden Jump in Levels Bug

Sorry if the discussion's title is confusing – that's honestly the best way I could think of to explain what I'm experiencing. Here's a video screen grab with audio to illustrate further the possible bug I've run into: Premiere CC 2014 Audio Transition Bug - YouTube Do you hear that little jump in volume right as the playhead plays through the transition? It almost sounds as if it's doing the precise opposite of what the fade should be doing.
I'm just trying to add some small, two-frame, Constant Power transitions to some audio tracks to smooth out a cut – one of the oldest tricks in the book. I see this in many different kinds of projects, regardless of size, creation date, types/formats of media used, timeline settings, etc. It mostly just seems random to be honest.
This specific project is very minimal with all 1080p ProRes media being used. No .MTS, .MP4, or anything of the like. The project is all cuts, and no fancy VFX, titles, color grading, dynamic linked clips, etc. It's all quite simple.
Does anyone have any ideas on how to fix this problem? Thanks in advance for your help!

I see you have a stereo track. When I panned my tracks 100 I would get pops and glitches, when I panned them 99 the pops and glitches went away. Adobe support also told me that Constant Gain is the least buggy of all the transitions, while Constant Power is the most buggy.

Similar Messages

Constant Power Transition Causing Audio Stutter in Exports

I've now had this happen with two completely seperate projects today where I preview my edit, everything looks and sounds good, but then when I export there's a clear audio stutter wherever I used a constant power audio tansition. My solution thus far has just been to take out these transitions, but I'm wondering when this will be fixed.
NOTE: I experienced the Constant Power bug that happen last month that sounded like a super loud buzz. This is different.
Is anyone else experienceing this problem?

>wondering when this will be fixed
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform to report a bug

Sync issues on export to AME using constant power

Using a new 12 core Mac Pro with PP CC 2014.
If I have any CONSTANT POWER transitions in my timeline (for example when shortening music) when I export to AME as an H.264 YouTube setting the video plays back out of sync. You can hear it 'jump' at the points where the CONSTANT POWER transitions are. It trys to catch back up but all the edits are off by at least 10 frames. Near the end of the 2 minute video the sync catches back up as long as there are no CONSTANT POWER transitions near the end.
The ONLY work-around that works is deleting all CONSTANT POWER transitions and using straight cuts.
Strangely enough when you play back the movie inside PP CC 2014's timeline- it plays back smooth and clean.
Anyone else having this issue???
Using a audio wave file (music)

Use shorter audio files. Break up the audio into shorter, more manageable chunks, and then place those shorter audio files in your movie.

Best way to make a Constant Power Load

What would be the best way to make a load that always draws the same amount of power whatever the voltage on it. For exemple, an load would draw 100 mA at 24 VDC, 150 mA at 18 VDC and 200 mA at 12 VDC. All I found is to use Nonlinear Dependant source.
Any easier way to do this? Thanks.

Sorry about the file mix up, I was anxious to get it posted for you that I failed to realize you were using a different version.
As far as the last "amplifier" in your Leaky Feeder design, I actually hooked it up to the 24VDC supply on the left and this was a direct connect before the first resistor. I realize this is not what would be ideal for your application as probably you have only a certain place in the Leaker Feeder to tap off from. I would suppose this would be going into a different entry way off the main entry at an intersection so I do not know how my adjusting the placing of this would effect the results because it seems to me by doing this I have bypassed a bunch resistance in the Feeder cable itself (if that is what the resistors represent) and also bypassed a number of amplification stages in the process as well.
I will post a picture of my circuit for you to examine and try in Version 9. This is the only thing I could come up with to where the power draw was the same no matter what the voltage input was. The only thing I can see as a drawback is that with this circuit the current remains constant but the voltage fluctuates. If I use a 24V regualtor and drop the input voltage to 12V the current remains at approx 118ma but the voltage drops to 12V when I plug it into your circuit.. I will let you try it and see what you may be able to do with it.
Message Edited by lacy on 04-28-2008 05:47 PM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
Possible Constant Power Load.JPG ‏285 KB

Serializable transaction isolation level bugs

Hello!
I would like to know which versions of Oracle database are free or not free of serializable transaction isolation level bugs.
Especially I'm interested in all informations about 440317 bug which is described here: Bug in Oracle's handling of transaction isolation levels?
Thank you very much.

If you are genuinely suffering from 440317 (and not poor design which is the most common cause of ORA-8177, and hence why it's taken so long for this bug to get fixed - originally raised in 7.2.2 !!!) then you will have to wait until 10g R2 sees the light of day.
Cheers, APC

Sudden Jump in Broadband usage

This month I have experienced a sudden jump in my usage. My average daily usage has approximately doubled.
Yesterday usage was 2.1GB .... Have data traffic monitors running on my iPads and PC's and I have an enormous discrepancy.
My Internet WiFi is shutdown between 22:30 and 7:30 every day.
Usual average monthly usage is 30.04GB ..... so far this month I am at 22.5GB as of the 12/6/15.
Clearly, my worry is that my 40GB will be exceed and subsequently be charged for what I perceive to be bandwidth I have not used.
Where can I find out WHEN my Internet (as in time of day) is being used and ideally how much traffic has been generated during that period (on an hourly basis would suffice)

Unless I can resolve this, I guess the only answer is to cancel my BT Broadband and move to an unlimited package with another provider.
All I ask is for some basic information, breakdown of usage during 24 hours, how difficult can this be ! Any breakdown !
Call me cynical, but what better way to force users onto the more expensive unlimited packages in order the save going over their monthly limit. Had BT broadband for I think 3 years now and never once gone over my monthly limit.
Something is wrong and all I want is the answer to a simple request from BT.
Like I mentioned before, I know that their recording of user data is flawed.

Sudden Jump in signal

Hello, I'm trying to make a program running a stage with two signals. A linear for the Y position and an oscillating signal for the x position.
The X signal starts with 0 amplitude and is increased until it gets the desired amplitude. Afterwards the Y signal drives the stage up and down, and finally the amplitude goes from 300 to 0 again.
The thing is, when it is increasing, the change in the amplitude is continuous, but when it is decreasing there is a sudden jump. I don't see that on Labview, but on the oscilloscope it gets stuck for a moment to a certain value and then it jumps. I have checked the values sent , and are the same ( only reversed, from 0 to 300, and then from 300 to 0 ) during the increase and decrease of the amplitude.
I have no idea what I am doing wrong or what could i change to solve this, any idea is more than welcome.
Thank you very much in advance,
marc
Attachments:
stage5VmotionInputs.vi ‏187 KB

Reposted here:
http://forums.ni.com/t5/LabVIEW/Avoiding-jitter/td-p/2127098
Nick C.
Cardiff University

Low level bug: Notification Center Banner

I found a low level bug in iOS 6 recently. Here are screenshots:
You can do with following steps:
1. Keep your iPhone at Lock Screen
2. Slide up camera button and in camera mode
3. Tap the left down corner "Photo Library" while tapping HOME button, bug appeared.

Seems to be a problem among many users.
https://discussions.apple.com/thread/6605975
https://discussions.apple.com/message/26851563#26851563
https://discussions.apple.com/message/26863504#26863504

G585 cursor will suddenly jump

I bought the G585 laptop yesterday and I'm ready to throw it through the window!!!!
A couple of things if you could help........
1. When I am typing, the cursor will suddenly jump up a line/up the page etc. It is most frustrating!! How can I stop this?
2. Now and again when I type, the work suddenly highlights itself?
I am going to scream in a minute, because I have typed this message three times already because the flippin cursor keeps moving up...................and it has just deleted a whole line I typed!!!!
Please can you help..............oh and by the way, I am not very technical, so please keep your replies "simple"!ha ha
Thanks
Moderator Note; subject edited to reflect content, moved to correct forum.

Kerry03, welcome to the forum,
you probably need to reduce the sensitivity of the touchpad tapping function or turn it off in the touchpad properties. (Control Panel > Mouse).
You'll find a few more cases of this having happened if you search the boards .
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Cursor suddenly jumps to upper left corner

I have tried to do a search for this, but most of what I looked at did not seem to fit exactly. I have a desktop iMac G4, the "lamp" style one. Every so often the cursor suddenly jumps up to the upper left corner. I cannot figure out anything I am doing or anything that I might have downloaded that could cause it. It seems to be getting more frequent. I have repaired permissions, run macjanitor.
Does anyone have any suggestions? It is hardly a life or death issue, but it is annoying.
Many thanks in advance.
iMac 17In 1.25Ghz, 1 gig ram Mac OS X (10.4.6) iPod Nano, iPod shuffle

You did not mention checking a couple of other items:
1) Check you mouse connection - unplug/replug. Have you tried using a different USB port to see if you can duplicate the problem? Make sure you don't have fuzz, dust and other assorted ca-ca under the mouse.
2) Check your preferences - System preferences>Keyboard & Mouse. Make adjustments and see if that helps.
3) You might also wish to toss your systempreferences.plist found in your Home>Library>Preferences
Hopes this helps.

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

This sounds like a hardware issue. I haven't seen this particular problem reported before.

In imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

When charging, the battery status from 95% suddenly jumps to 100%

Hi Guys!
I just bought my Xperia Z1 last month, i haven't full charge to 100% my battery since the the first 8H charging the time i bought. I always charge when the status 20% and below, but never flat. Now I noticed that the battery status from 95% suddenly jump on to 100% within a matter of seconds.
Please help.... don't know the cause, is my battery already damaged or spoiled?
Thanks.
Solved!
Go to Solution.

Well with any battery you need to cycle it completely once ina while. Charging it from 20% back to 100% is actually detrimental if you do it on a regular basis.
Sometimes let your phone dicharge completely then charge it completely to 100%.
The issue you are facing however could also be due to the battery capacity being detected wrongly.
Try going to *#*#7378423#*#* on your dialer and go to diagnostics and check battery health.. if it reads over 300000 then you are fine... Its not your battery.
Don't forget to give Kudos and / or mark the correct answer.

While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond.

While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond. This has been happening ever since the last update.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Why would my other category suddenly jump to over capacity?

why would my other category suddenly jump to over capacity?

I'm in the process of updating an iPod Touch and iPad2 to IOS5. I had the exact same thing happen in BOTH cases! I've never experienced it before.
The fix, in both cases, is as Ingo2711 stated - restore the device. And boy, has that been painful (as in taking several hours for each device).
While I accept that this problem has occured prior to IOS5 installs, I find it very odd that it occured to me on BOTH IOS5 installs. Either there is something common to both my devices (an application perhaps?) that cased it or something about the IOS5 upgrade that makes this problem more likely.
Someone with a lot more knoweldge than I have would need to look at it to figure out what's going on. I'll just be happy to have this issue behind me and hopefully, not see it again!

Constant Power Transition Sudden Jump in Levels Bug

Similar Messages

Maybe you are looking for