Constant problem with store in my Lumia 620

Hi
When I open store in my Lumia 620 it shows error c00cee22.
Solved!
Go to Solution.

Hello, Vaibhav_16390. Have you already tried the suggestion given by eshiejamz? BTW, are you also using a Lumia 620? You may also try deleting the browser's history. Go to Settings > applications tab > Internet Explorer > delete history. Once done, press and hold both the volume down and the power keys for 10-15 seconds.
Let us know the outcome.

Similar Messages

Problem with the Update Nokia Lumia 620

The update was initialized on my Nokia Lumia 620 that I bought yesterday. When it started the phone was connected to WiFi. However, after 10 minutes I thought it stuck so I put the battery out and in again. But the update started again. The WiFi was still on. I waited an hour but nothing happened so again I put the battery out and in. Later the WiFi connection was shut down and the update still going. Later I tried to put the battery out and in all over again. I left the phone for the night, it lost all the battery so I plugged the charger in it and then the update started again! I have the 3G internet purchased, so when it's not on WiFi then it should be working. So my question is if the update is really going on (since 4am, that is almost 4 hours till now) or is something wrong. How long can it take on 3G in the situation I described? Will it ever end or should I go and return it to the service for them to fix it? Please help me! It's really urgent!

Update is possible thru' WiFi only.. It may take in excess of an hour for the whole update process to complete ..so once you start it (thru' WiFi) just leave it .. Don't go on removing the battery all the time ...Keep the phone on charging when you update. Additionally you may have settings-->WiFi--advanced ..and select 'Keep WiFi on when screen times out..' .
If you still get the problem visit Nokia Care to get it updated.

Problem with store in my lumia 520

Hi.....
i cant download apps from store above 20mb...
first above 100mb required wifi.... But now it asks for only 20mb....
what i do....
please help me.......

Hi krishna212,
Welcome to the forum!
Did you encounter any error message? What type of connection used? Please note that you will need a WI-FI connection when downloading apps or games larger than 50 MB. You can also try to download an application via web and sent it to your phone automatically. Just visit:
http://www.windowsphone.com/en-us/store
Check this out for more information:
http://www.windowsphone.com/en-US/how-to/wp8/apps/download-apps-and-games-faq
Keep us posted.

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problem with glance screen on lumia 820

I have a problem with my Lumia the glance screen does not work,only works when the phone is exposed to the sun or any light and when is not it doesn't shows up,when is always does not work the same with peek and the other ones, I need help I have this problem since the update please reply me.

hi mate,
have you checked that you are up to date with all the latest Nokia system app updates from the Store? also try performing a soft reset too.

Problem with store ResultSet and show result in table

Hi, I'm kind of new in ADF, I need to store ResultSet and show result in table-component. I have two problems:
1) I get my ResultSet by calling callStoredProcedure(...) and this returns actually ref_cursor as ResultSet.
When I try to println() contains of this result set in this method - it works OK (commented part),
but when I want to println() somewhere else (eg. in retrieveRefCursor() method) it doesn't work.
The problem is that the scrollability of the ResultSet is lost - it becomes a TYPE_FORWARD_ONLY ResultSet.
Is there any way to store data from ref_cursor for a long time?
2) My second problem is "store any result set and show this data in table". I have tried use method storeNewResultSet() but
without result (table contains only "No rows yet" and everything seems to be OK - no exception, no warning, no error...).
I have tried to call this method with ResultSet from select on dbs (without resultSet as ref_cursor ) - no result with createRowFromResultSet(),
storeNewResultSet(), setUserDataForCollection()...
I've tried a lot of ways to do this, but it doesn't work. I really don't know how to make it so it can work.
Thanks for your help.
ADF BC, JDev 11.1.1.0
This is my code from ViewObjectImpl
package tp.model ;
import com.sun.jmx.mbeanserver.MetaData ;
import java.sql.CallableStatement ;
import java.sql.Connection ;
import java.sql.PreparedStatement ;
import java.sql.ResultSet ;
import java.sql.ResultSetMetaData ;
import java.sql.SQLException ;
import java.sql.Statement ;
import java.sql.Types ;
import oracle.jbo.JboException ;
import oracle.jbo.server.SQLBuilder ;
import oracle.jbo.server.ViewObjectImpl ;
import oracle.jbo.server.ViewRowImpl ;
import oracle.jbo.server.ViewRowSetImpl ;
import oracle.jdbc.OracleCallableStatement ;
import oracle.jdbc.OracleConnection ;
import oracle.jdbc.OracleTypes ;
public class Profiles1ViewImpl extends ViewObjectImpl {
    private static final String SQL_STM = "begin Pkg_profile.get_profile_list(?,?,?,?);end;" ;
    public Profiles1ViewImpl () {
    /* 0. */
    protected void create () {
        getViewDef ().setQuery ( null ) ;
        getViewDef ().setSelectClause ( null ) ;
        setQuery ( null ) ;
    public Connection getCurrentConnection () throws SQLException {
        // Note that we never execute this statement, so no commit really happens
        Connection conn = null ;
        PreparedStatement st = getDBTransaction ().createPreparedStatement ( "commit" , 1 ) ;
        conn = st.getConnection () ;
        st.close () ;
        return conn ;
    /* 1. */
    protected void executeQueryForCollection ( Object qc , Object[] params , int numUserParams ) {
        storeNewResultSet ( qc , retrieveRefCursor ( qc , params ) ) ;
        // callStoredProcedure ( qc , SQL_STM ) ;
        super.executeQueryForCollection ( qc , params , numUserParams ) ;
    /* 2. */
    private ResultSet retrieveRefCursor ( Object qc , Object[] params ) {
        ResultSet rs = null ;
        rs = callStoredProcedure ( qc , SQL_STM ) ;
        return rs ;
    /* 3. */
    public ResultSet callStoredProcedure ( Object qc , String stmt ) {
        CallableStatement st = null ;
        ResultSet refCurResultSet = null ;
        try {
            st = getDBTransaction ().createCallableStatement ( stmt , 0 ) ; // call
            st.setObject ( 1 , 571 ) ; //set id of my record to 571
            st.registerOutParameter ( 2 , OracleTypes.CURSOR ) ; // my ref_cursor
            st.registerOutParameter ( 3 , Types.NUMERIC ) ;
            st.registerOutParameter ( 4 , Types.VARCHAR ) ;
            st.execute () ; //executeUpdate
            System.out.println ( "Numeric " + st.getObject ( 3 ) ) ;
            System.out.println ( "Varchar " + st.getObject ( 4 ) ) ;
            refCurResultSet = ( ResultSet ) st.getObject ( 2 ) ; //set Cursoru to ResultSet
            //   setUserDataForCollection(qc, refCurResultSet); //don't work
            //   createRowFromResultSet ( qc , refCurResultSet ) ; //don't work
            /* this works but only one-time call - so my resultSet(cursor) really have a data
            while ( refCurResultSet.next () ) {
                String nameProfile = refCurResultSet.getString ( 2 ) ;
                System.out.println ( "Name profile: " + nameProfile ) ;
            return refCurResultSet ;
        } catch ( SQLException e ) {
            System.out.println ( "sql ex " + e ) ;
            throw new JboException ( e ) ;
        } finally {
            if ( st != null ) {
                try {
                    st.close () ; // 7. Close the statement
                } catch ( SQLException e ) {
                    System.out.println ( "sql exx2 " + e ) ;
    /* 4. Store a new result set in the query-collection-private user-data context */
    private void storeNewResultSet ( Object qc , ResultSet rs ) {
        ResultSet existingRs = getResultSet ( qc ) ;
        // If this query collection is getting reused, close out any previous rowset
        if ( existingRs != null ) {
            try {
               existingRs.close () ;
            } catch ( SQLException s ) {
                System.out.println ( "sql err " + s ) ;
        setUserDataForCollection ( qc , rs ) ; //should store my result set
        hasNextForCollection ( qc ) ; // Prime the pump with the first row.
    /* 5. Retrieve the result set wrapper from the query-collection user-data      */
    private ResultSet getResultSet ( Object qc ) {
        return ( ResultSet ) getUserDataForCollection ( qc ) ;
    // createRowFromResultSet - overridden for custom java data source support - also doesn't work
   protected ViewRowImpl createRowFromResultSet ( Object qc , ResultSet resultSet ) {
        ViewRowImpl value = super.createRowFromResultSet ( qc , resultSet ) ;
        return value ;
}

Hi I have the same problem like you ...
My SQL Definition:
CREATE OR REPLACE TYPE RMSPRD.NB_TAB_STOREDATA is table of NB_STOREDATA_REC
CREATE OR REPLACE TYPE RMSPRD.NB_STOREDATA_REC AS OBJECT (
   v_title            VARCHAR2(100),
   v_store            VARCHAR2(50),
   v_sales            NUMBER(20,4),
   v_cost             NUMBER(20,4),
   v_units            NUMBER(12,4),
   v_margin           NUMBER(6,2),
   v_ly_sales         NUMBER(20,4),
   v_ly_cost          NUMBER(20,4),
   v_ly_units         NUMBER(12,4),
   v_ly_margin        NUMBER(6,2),
   v_sales_variance   NUMBER(6,2)
CREATE OR REPLACE PACKAGE RMSPRD.NB_SALES_DATA
AS
v_sales_format_tab   nb_tab_storedata;
FUNCTION sales_data_by_format_gen (
      key_value         IN       VARCHAR2,
      l_to_date         IN       DATE DEFAULT SYSDATE-1,
      l_from_date       IN       DATE DEFAULT TRUNC (SYSDATE, 'YYYY')
      RETURN nb_tab_storedata;
I have a PLSQL function .. that will return table ..
when i use this in sql developer it is working fine....
select * from table (NB_SALES_DATA.sales_data_by_format_gen('TSC',
                                    '05-Aug-2012',
                                    '01-Aug-2012') )
it returning table format record.
I am not able to call from VO object. ...
Hope you can help me .. please tell me step by step process...
protected Object callStoredFunction(int sqlReturnType, String stmt,
Object[] bindVars) {
System.out.println("--> 1");
CallableStatement st = null;
try {
st = getDBTransaction().createCallableStatement("begin ? := " +"NB_SALES_DATA.sales_data_by_format_gen('TSC','05-Aug-2012','01-Aug-2012') ; end;", 0);
System.out.println("--> 2");
st.executeUpdate();
System.out.println("--> 3");
return st.getObject(1);
catch (SQLException e) {
e.printStackTrace();
throw new JboException(e);

Constant problems with Java since upgrade to OS X 10.7

I recently purchased a Macbook Air with OS X 10.7 installed, now updated to version 10.7.5.
I'm having constant issues with Java and repeatedly being told to update to the latest version, even when I have the latest version installed (now Java 7 update 9). I've visited dozens of forums and seen posts about the same issue, but none of the solutions work for me.
I've seen variations of the following advice in several places:
Apple disables the Java plug-in and Webstart applications when the Java update is done using Software Update. Also, if the Java plug-in detects that no applets have been run for an extended period of time it will again disable the Java plug-in.
To enable the Java plug-in
Go to Finder > Applications > Utilities > Java Preferences.
In the Java Preferences window check the box for Enable Applet plug-in and Webstart applications.
But I can't find anything called "Java Preferences" in my Utilities folder. I found a Java control panel in my System preferences, and it tells me everything is OK and running.
I also see comments about emptying the cache (Java cache?), but can't find where it's kept. I also can't find where the Java plugins are stored. So what to do?
Thanks for any assistance.
Martha

I went to the link on the Support website, downloaded the Java from there (Java for OS X 2012-006) and installed it. Then I went to the Java control panel in System prefs and the information is exactly the same as it was before I installed Java version 6. It still says I have the recommended version of Java (Java 7 update 9), which is what I installed a few hours ago.
Then I went back to the website where I've been having problems today and went through the process of requesting a document from the Spanish tax authorities, which I've never had trouble with in the past (before Lion). I got the same results as earlier and the same page sending me to www.java.com to "download the latest version". So I'm back to square one.
There's a comment on the page your link sent me to that mentions the "Missing plug-in" region on some web pages, but I've never seen this anywhere. All I ever get is a message telling me to update my Java.
Is there another version of Java that would work better? If so, where can I get it?
Thanks.

IPhone has constant problems with Computer-To-Computer network

I use a Computer-To-Computer network to connect my iPhone with my MacBook Pro when I'm at the office. This enables syncing of Things and OmniFocus between my iPhone versions of these programs and the versions on my MacBook Pro. I have one of the original (2G) iPhones. I daily go to my Airport icon on my Mac's menu bar, click on Create Network, and set up a password. I'm using 40-bit WEP.
This sort of syncing procedure worked fairly well until iPhone OS 3.0. Ever since then, it's been completely unreliable. I've tried changing the channel a number of times, and of course rebooting both the iPhone and the computer dozens of times. It's still a problem.
Anyone heard of this networking problem with 3.0? Any info appreciated! Thanks.

yes, i have been having problems with computer to computer networking to iphone as well. for now, the only thing that keeps a steady connection is removing the sim card, so keep a paper clip handy.

Constant Problems with Ideapad Y510P Trials and Tribulations no one wants to help me with

My trials and tribulations with my Ideapad Y510P, this website, the Customer Service, and the Repair Department are as dauntless, perilous, and stressful as the journey up Mount Doom to cast the One Ring into the fiery depths to end the reign of chaos Sauron raught to Middle-Earth. It begins with my external/slide-in Graphics Card turning on and off and outright stopping to work and putting all the burden on the internal graphics card (of the same kind). Ultimately I'm told to try out SLI and come to this website to find a shoddy trouble-shoot resolution to try and trick the OS and computer to use SLI properly to share the burden of more stressful games and games all together (which I didn't even TOUCH; it's above my knowledge of computers). For a small time it works but in the end the external graphics card stops working completely and all the burden is given to the internal graphics card which it too stops working. Eventually my laptops screen stops working as well and the OS, I had to crack open an old monitor to see what was going on, on my computer, when I turned it on the lenovo screen was constantly flickering like something out of a horror movie or a foreboding warning of what was to come that I'm now dealing with. I figure I should install Windows 7 because at this point and my lack of knowledge I have no idea how to reinstall Windows 8 from a non-properly working laptop with no CD Drive. In the beginning I thought two graphics card would be perfect for more stressful games, sharing the burden to ease it so they don't overheat; well that idea and thought process was shot out the window and into a corner where it was beaten to a bloody pulp. So I remove the HD from the laptop, go downstairs to my Desktop and hook it up and install Windows 7 into it, in hopes of maybe resolving issues or trying to at least get to the desktop to figure something out. Well it absolutely did nothing. So I bite the bullet and send it into the "Repair Department" thinking WHAT. COULD. POSSIBLY. GO. WRONG. I get it back today at around noon with all my hopes and dreams to find out that instead of putting Windows 8 back into the Y510P I'm given a Windows 7 Desktop asking me for a CD KEY that I don't have, this isn't even the same CD OS I installed onto it but one from the Repair Department asking for a CD KEY I have no means of acquiring. I also find out that apparently it wasn't the Graphics Cards at all but the MOTHERBOARD. OF COURSE! (sarcasm) SO I CALL CUSTOMER SERVICE Customer Service tells me they can't give me the the CD Key because they have no correlations to the Repair Department (this is starting to sound like a bad divorced couple) so they can't give me the CD Key, let alone email it to me. So I ask to talk to the Supervisior (who is probably the nicest thing that has happened thus far in my trails of Lenovo and the Misadventures of O_Green_World). He tells me that the motherboard is set to work with Windows 8 best and that I can install BIOS for Windows 7 on the website and to reinstall my copy of Windows 7 the way I did it before giving it to Lenovo, and or waiting for this Windows 8 CD which isn't even an OS but some sort of way to contact the Windows 8 on the Motherboard to install it that way (which is being mailed to me now). Now here is my fresh new problem with this whole shindig. I've installed my copy of Windows 7 onto my Lenovo Y510P. It doesn't have the installation drivers for the Ethernet or Network Controller, under Device Manager they are under "Other Devices" in the Device Manager window. So I can't can't a Ethernet Cable let alone Wifi in order to go onto Lenovo's website to download Windows 7 BIOS/Drivers for Y510P. ALSO, ALSO, if the computer falls asleep it doesn't wake up at all I have turn off the computer and turn it back on. For all that is good in the world please, someone, somewhere help. [Edit] - I just had to seperate my **bleep** post because it posted it as a giant wall of text.

Hello Sachin,
Here is the latest version of the code , I have tried many. I am not familiar with code that is why I came from Dreamweaver to Muse. Laugh, it would make you cry.
Dreamweaver is advertised as wysiwyg which it certainly is not. Muse advertises that you can build a website without knowing code( as long as you do not want to put a simple run of the mill animation on your site)! Having had my usual grouse I still love Muse as it does everything, well nearly everything it says it will do, and makes building a reasonable site possible for someone who has very little knowledge. Once you have sorted the code out I probably will need to talk to you again when it comes to uploading to server as I can see from the forums that this seems to be a weekness of the system also. Thanks for your cheerful reply to my utterly unreasonable previous communication and I look forward to you solving all my problems. I think' IT' is the only business in the world where people pay good money for products that don't work and are then told to go and chat amongst themselves on forums to see if they can solve the problems collectively. Couldn't resist that one I'm afraid. Old and grumpy! I hope you can access the code. I have no idea where it is but I copied it here in the html frame. I even find it difficult to use this forum. User friendly!
ie8 html5 video creator by EasyHtml5Video.com v1.8

Constant problems with logic 8 (only in last 2 weeks)

Hi,
I've been using logic pro 8 since the day it came out, and have had hardly any problems with it.
Now all of a sudden it is crashing all the time, sometimes it just totally loses sound and my monitors just click and pop, or other times i get random 'blasts' of white noise through my left monitor!!
I put snow Leopard on a few days ago and it appears to be worse than ever for crashing now.
Anyone else had similar problems or know what the deal is here?
Many thanks
Tom

John Alcock wrote:
Interesting. There are many reports of this noise, but all (AFIAK) with Logic 9, not 8. I've had the same problem with LP9 but haven't with 8.
http://discussions.apple.com/thread.jspa?threadID=2144002&tstart=200
See if there's anything in that thread which helps.
Today I had this white noise bursts for the 1st time since I upgraded to LP9...the project is super simple...an audio track - flexed and muted ...and the bounce in place regions created from that on a second audio track...I was doing some fades so I was moving back and forth to the regions to listen and adjust the fades...
It's really loud and I'm glad I wasn't wearing headphones...
I check the link you posted ......
A

Constant problems with external HD used for time machine.

I have had numerous problems with my backup disk and can't seem to solve the problem... I often get errors with disk not ejecting properly, sometimes when the iMac has gone to sleep, sometimes not. Often the Mac won't recognise the disk when plugged back in (it recognises the other partition though). I can get the disk in disk utility sometimes, but if I run repair disk it finds a lot of errors and tells me it can't fix the disk. I'm told to Backup, format the disk etc.
Running yosemite on a 2008 iMac - disk is Hitachi 1TB usb powered (plugged straight in to iMac). I have prevented spotlight from indexing the HD.
Any advice ideas? Thanks in advance.

applejoose wrote:
I can't because it's a specific type.
Is it hard-wired to the enclosure? If not, examine the connectors and compare with what is available. I doubt that it has a connector that is unique to this particular drive.
If you choose to replace the drive, don't get another manufacturer-branded external. They are often "crippled" so that they can't be used in anything other than the generally cheap enclosure in which they are packaged, or only usable if you re-format them. Here's a comment from a recent Macintouch thread on new Seagate 5TB externals (http://www.macintouch.com/readerreports/harddrives/index.html#d23mar2015):
A word of warning for those who want to rip out their drive. If you have data on it, it will only be read by Seagate controllers such as its original case or the GoFlex adapters. If you stick it in something like an IcyDock, it cannot be read and require a reformat. If you used it with another controller, it cannot be read when you put it back on the Seagate controllers.
A good quality enclosure, such as the OWC Mercury aluminum cases, is a good investment. You can choose the drive you install, and you usually get a better drive warranty that way.

Constant Problems with ITunes

I have two continuing problems with ITunes which are incredibly annoying.
When I start Itunes on about one in three occasions it immediately shuts down again.
And it regularly shuts down after ripping a cd but without ripping the final track of the cd - and this happens irrespective of the number of tracks on the cd.
I have tried reinstalling itunes but it does not cure the problem.
Never had any problems with previous versions of ITunes. GRrrrrrrrrrrrrrr!!!!!!!!!!
Windows XP Pro

Welcome to Apple Discussions!
Try this similar article and see what it will do:
http://docs.info.apple.com/article.html?artnum=61711
Also-everything's up to date, right? iPod and iTunes?
http://www.apple.com/ipod/download
http://www.apple.com/itunes/download
Try switching the USB ports as well.
If not, post back and we can try a few other alternatives
rjl

Constant "Problem with Shortcut" Every Time iTunes updates

Sorry to vent, but this really bugs me.
Ok, this can't be hard to fix and isn't hard for ME to fix when I update iTunes, but this is REALLY, REALLY, REALLY annoying.
Here's the issue. Every time iTunes updates itself, it invalidates every Shortcut for the executable. I get "Problem with Shortcut" Windows Window and which says "This action is only valid for products that are currently installed."
This happens EVERYTIME iTunes updates itself, which seems very often.
It is really, really annoying. And it ONLY happens with iTunes (no other software - for example Firefox doesn't do this), which says to me that Apple can't be bothered to make sure that the path to their new executable is the same as the old when they do the update. Actually, now that I look at it, it looks like it is somehow deleting the path in the existing shortcuts when it updates, which sounds like a bug.
Any decent usability testing would find this and quickly fix this, but this happens on EVERY windows computer I have EVERY time iTunes updates itself, and it has been there for at least the last 5 upgrades, so I know it is not a 1 off thing only I am seeing.
Please, please, please fix this in your next patch.
Thanks.

Add me to the list of the angry. Safari on Windows does this too.
Apple apps are the only ones I've ever seen on Windows to do this. I don't even understand how/why it happens - does it take the time to find all the shortcuts (which are separate files it would have to search your HD for) and deliberately break their paths?! If Apple are going to make windows applications, it'd be nice if they swallowed their pride and learnt the windows platform and its norms. 99.999% of other software vendors have figured out how to make shortcuts that work...
The worst thing about this is that the error message (admittedly, I think it's a windows message) gives the impression you have to reinstall iTunes! A quick Google search shows that a fair few people think that's the solution.
*If you're getting this problem: there's no need to uninstall or reinstall iTunes!* the problem is with the shortcut only, not the program. To fix it, find a working shortcut to iTunes (as mentioned above, there's normally a fresh one in your start menu somewhere) and drag it wherever you need it, then delete the old one. If you can't find a working one, browse to "program files"->"itunes" on your hard drive, select itunes.exe, go to File->Create Shortcut. A new shortcut will be made in that folder, that you can put wherever you like.

Lumia 920 / Problem with Store App

Right after I bought my Lumia 920, a added few applications (viber, instagram, etc.) using store app.
After few days, everytime I tried to open Store App, or even visit the market page using browser on my device, I got the same message:
''Service unavailable at the moment. Check again in a little while.''
My phone is totally blocked for downloading new Apps. I'm not able to, for example update ''What's Up'' App beacuse it's redirecting me automatically to Store. This haven't been changed for a while, about month or two. I even updated phone regulary once update was available, nothing changed after that. All other stuff is working perfectlly, so I'm not sure what could be the problem.
Can anyone help?
Thanks!

Is everything ok with your Microsoft account? You didn't change your password recently or anything like that? Try logging into your microsoft account just to make sure everything is ok.

Problem with store app, lumia 720

hi
i bought lumia 720 few weeks ago, and because i can't download apps from the windows store directly (cuz i'm from syria), i have to download them to the laptop then move them to the SD card, and later open the .XAP files from the store app.
the problem is that THE STORE APP ISN'T WORKIING, it keeps saying "service unavailiable right now. Check back in a little while".
so now i can't download any thing on my lumia and this sucks
plz help..

Hi, Adeptbe. Thanks for posting your concern on our community. Does the issue occur regardless of the connection you are using? Does the date and time of your phone are properly setup? Check it by going to Settings>date+time. Also, try checking if the Microsoft account on your phone is syncing properly. Do it by going to Settings>email+accounts>press and hold Microsoft account>sync. If you encounter any error message, you may check it in here: Common Windows Store error codes. Let us know if you need further assistance.

Constant problem with store in my Lumia 620

Similar Messages

Maybe you are looking for