Constant problem with WRT54GS

Everytime I go thru the process of setting up the router, it works for fine for a few days or even a couple of weeks. However, I then start to get "cannot display webpage" messages from Internet Explorer and I can hardly do any browsing at all. When I click on the EasyLink Advisor, it tells me that it's detecting the computer is connected to a different network. If I connect directly to the modem, the internet works just fine.
How, all of a sudden, is a different network detected? What other network is it? I'm using the router to connect to an Xbox 360 and Wii upstairs, and I'm also using a range expander to get a better signal. I'm really stumped now. When I set the router up using the EasyLink Advisor, is it skipping an essential step to prevent this from happening?
I appreciate any help.

You should update the firmware of router. It should take care of this issue.

Similar Messages

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Pls help me.i have a problem with WRT54G wireless router.

Dear all, Now i got face some problem with WRT54G wireless router.The problem is after i connect to the internet...the wireless will automatic drop..is that any ppl here got face this and got any solution to solve it...?thanks for sharing..

hi...logon to router's setup page and try changing channel to 11, go to advanced wireless settings, try changing transmission rate to 54Mbps, beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmwar on the router...check whether it maks any difference or not and let me know.

Network cable unplugged problem with WRT54G

I just got a WRT54G wireless router recently, and experienced some problems with it. There are 5 notebooks in my network using wireless card and 2 PCs connect to the router through cables. The router is with ver 7.00.1 firmware.
The router is working fine, the problem is sometimes it will show "Network cable unplugged" on my PC, and the whole network will be interruptted, the network will be resumed in few seconds and all machines need to get IP from the DHCP server again. It's quite annoying to be disconnected from middle of the work. I don't know what is the cause, seems like the router is re-reading it's configuration. I have tried to refresh the fireware but with no luck. Someone else got this problem before? anyone has a solution for this? Thanks a lot!
Regards,
Leo

Try the following tips to resolve your problem:
Disable the Ethernet network adapter if you are not using it. This applies, for example, when running a WiFi home network with computers that have built-in Ethernet adapters. To disable the adapter, double-click the small Network Cable Unplugged error window and choose the Disable option.
Check both ends of the Ethernet cable connected to the adapter to ensure they are not loose.
Replace the Ethernet cable with a different one to verify the cable is not damaged.
Update the network adapter driver software from the manufacturer's Web site.
Change the Link Speed and Duplex settings (using Device Manager) to use "100 Mbps Full Duplex" or "10 Mbps Full Duplex" instead of Auto Detect.
Replace the Ethernet network adapter
Good Luck,
Ttech

Constant problems with Java since upgrade to OS X 10.7

I recently purchased a Macbook Air with OS X 10.7 installed, now updated to version 10.7.5.
I'm having constant issues with Java and repeatedly being told to update to the latest version, even when I have the latest version installed (now Java 7 update 9). I've visited dozens of forums and seen posts about the same issue, but none of the solutions work for me.
I've seen variations of the following advice in several places:
Apple disables the Java plug-in and Webstart applications when the Java update is done using Software Update. Also, if the Java plug-in detects that no applets have been run for an extended period of time it will again disable the Java plug-in.
To enable the Java plug-in
Go to Finder > Applications > Utilities > Java Preferences.
In the Java Preferences window check the box for Enable Applet plug-in and Webstart applications.
But I can't find anything called "Java Preferences" in my Utilities folder. I found a Java control panel in my System preferences, and it tells me everything is OK and running.
I also see comments about emptying the cache (Java cache?), but can't find where it's kept. I also can't find where the Java plugins are stored. So what to do?
Thanks for any assistance.
Martha

I went to the link on the Support website, downloaded the Java from there (Java for OS X 2012-006) and installed it. Then I went to the Java control panel in System prefs and the information is exactly the same as it was before I installed Java version 6. It still says I have the recommended version of Java (Java 7 update 9), which is what I installed a few hours ago.
Then I went back to the website where I've been having problems today and went through the process of requesting a document from the Spanish tax authorities, which I've never had trouble with in the past (before Lion). I got the same results as earlier and the same page sending me to www.java.com to "download the latest version". So I'm back to square one.
There's a comment on the page your link sent me to that mentions the "Missing plug-in" region on some web pages, but I've never seen this anywhere. All I ever get is a message telling me to update my Java.
Is there another version of Java that would work better? If so, where can I get it?
Thanks.

Problems with WRT54GS and EasyLink after adding Comcast Digital Voice.

I had a working network. Cable modem (Comcast), WRT54GS, 2 wired PCs (one XP/SP3, one Vista Home Edition SP1), 2 wireless laptop PCs (one XP/SP3, one Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as network printer). Everything was fine and worked.
Then, I added Comcast Digital Voice. Obviously, they switched the cable modem for a new cable modem with the phone service option. Now, I can't print to the OfficeJet from the wired Vista PC, and EasyLink displays "initializing" for as long as I'll wait (5+ minutes).
I finally have to kill EasyLink from the TaskManager. Any help or ideas appreciated!
Solved!
Go to Solution.

I solved the problem. It turns out the new cable modem and problem with EasyLink initializing were "red herrings".
The problem turned out to be a classic network problem! The hard-wired Vista PC had the wrong IP address. The wireless XP PC had the printer configured by network name instead of network (i.e. IP) address.
When I deleted the printer on the Vista PC and re-added it with the correct address everything worked fine.
Apparently the printer got a new IP address from the server on the WRT54GS after the installation of the new modem. Also, it looks like Vista doesn't report a communication error for a network printer, but does for a USB direct connect.

Problems with WRT54G and Call of Duty 4 hosts....XBOX360

I have a WRT54G wireless router and an xbox360 hooked up wirelessly to it using the wireless adapter made my microsoft for the 360. The problem is that it is nearly impossible for me to connect to ANY host at all. My internet works fine and I dont have this problem with other games. I'm wondering if anyone can help me out with this. My isp is Verizon DSL, i have a Westell 5100 modem, that is about all else I can think of that may have any importance. Thank you for the help in advance.

Check the firmware of the router ... if possible upgrade the firmware .... Also try to forward the ports on the router setup page ..

Problems with WRT54G

this is my problem i have the wire from my modom to my router the internet light is on i have a cable hooked in to the back of the linksys router in the #1 port, the cable in #1 port is then hooked to my desktop pc . i have a WLAN light on . ok know for the fun part i get a great signal on my laptop so it is seeing the router but will not connect to the internet.i have tried everything i can think of and then everything some websites have said but nothing works so can you tell me what you think is the problem or if it is operater error

I have the same problem with a slight difference - my desktop is connected to the WRT54G through a LinkSys WUSB54GC Adapter - it runs fine. I have the same problem with a laptop - it can see the router but cannot connect to the internet. I turned of security settings on the laptop, and have defined a unique SSID. The laptop continues to see the router but not the internet! The laptop has been able to successfully connect to a number of different wireless routers. I have tried every logical router setting to see if the laptop can see the internet and nothing helps. I restored to factory settings before I defined the new SSID. Help!!!

IPhone has constant problems with Computer-To-Computer network

I use a Computer-To-Computer network to connect my iPhone with my MacBook Pro when I'm at the office. This enables syncing of Things and OmniFocus between my iPhone versions of these programs and the versions on my MacBook Pro. I have one of the original (2G) iPhones. I daily go to my Airport icon on my Mac's menu bar, click on Create Network, and set up a password. I'm using 40-bit WEP.
This sort of syncing procedure worked fairly well until iPhone OS 3.0. Ever since then, it's been completely unreliable. I've tried changing the channel a number of times, and of course rebooting both the iPhone and the computer dozens of times. It's still a problem.
Anyone heard of this networking problem with 3.0? Any info appreciated! Thanks.

yes, i have been having problems with computer to computer networking to iphone as well. for now, the only thing that keeps a steady connection is removing the sim card, so keep a paper clip handy.

Constant Problems with Ideapad Y510P Trials and Tribulations no one wants to help me with

My trials and tribulations with my Ideapad Y510P, this website, the Customer Service, and the Repair Department are as dauntless, perilous, and stressful as the journey up Mount Doom to cast the One Ring into the fiery depths to end the reign of chaos Sauron raught to Middle-Earth. It begins with my external/slide-in Graphics Card turning on and off and outright stopping to work and putting all the burden on the internal graphics card (of the same kind). Ultimately I'm told to try out SLI and come to this website to find a shoddy trouble-shoot resolution to try and trick the OS and computer to use SLI properly to share the burden of more stressful games and games all together (which I didn't even TOUCH; it's above my knowledge of computers). For a small time it works but in the end the external graphics card stops working completely and all the burden is given to the internal graphics card which it too stops working. Eventually my laptops screen stops working as well and the OS, I had to crack open an old monitor to see what was going on, on my computer, when I turned it on the lenovo screen was constantly flickering like something out of a horror movie or a foreboding warning of what was to come that I'm now dealing with. I figure I should install Windows 7 because at this point and my lack of knowledge I have no idea how to reinstall Windows 8 from a non-properly working laptop with no CD Drive. In the beginning I thought two graphics card would be perfect for more stressful games, sharing the burden to ease it so they don't overheat; well that idea and thought process was shot out the window and into a corner where it was beaten to a bloody pulp. So I remove the HD from the laptop, go downstairs to my Desktop and hook it up and install Windows 7 into it, in hopes of maybe resolving issues or trying to at least get to the desktop to figure something out. Well it absolutely did nothing. So I bite the bullet and send it into the "Repair Department" thinking WHAT. COULD. POSSIBLY. GO. WRONG. I get it back today at around noon with all my hopes and dreams to find out that instead of putting Windows 8 back into the Y510P I'm given a Windows 7 Desktop asking me for a CD KEY that I don't have, this isn't even the same CD OS I installed onto it but one from the Repair Department asking for a CD KEY I have no means of acquiring. I also find out that apparently it wasn't the Graphics Cards at all but the MOTHERBOARD. OF COURSE! (sarcasm) SO I CALL CUSTOMER SERVICE Customer Service tells me they can't give me the the CD Key because they have no correlations to the Repair Department (this is starting to sound like a bad divorced couple) so they can't give me the CD Key, let alone email it to me. So I ask to talk to the Supervisior (who is probably the nicest thing that has happened thus far in my trails of Lenovo and the Misadventures of O_Green_World). He tells me that the motherboard is set to work with Windows 8 best and that I can install BIOS for Windows 7 on the website and to reinstall my copy of Windows 7 the way I did it before giving it to Lenovo, and or waiting for this Windows 8 CD which isn't even an OS but some sort of way to contact the Windows 8 on the Motherboard to install it that way (which is being mailed to me now). Now here is my fresh new problem with this whole shindig. I've installed my copy of Windows 7 onto my Lenovo Y510P. It doesn't have the installation drivers for the Ethernet or Network Controller, under Device Manager they are under "Other Devices" in the Device Manager window. So I can't can't a Ethernet Cable let alone Wifi in order to go onto Lenovo's website to download Windows 7 BIOS/Drivers for Y510P. ALSO, ALSO, if the computer falls asleep it doesn't wake up at all I have turn off the computer and turn it back on. For all that is good in the world please, someone, somewhere help. [Edit] - I just had to seperate my **bleep** post because it posted it as a giant wall of text.

Hello Sachin,
Here is the latest version of the code , I have tried many. I am not familiar with code that is why I came from Dreamweaver to Muse. Laugh, it would make you cry.
Dreamweaver is advertised as wysiwyg which it certainly is not. Muse advertises that you can build a website without knowing code( as long as you do not want to put a simple run of the mill animation on your site)! Having had my usual grouse I still love Muse as it does everything, well nearly everything it says it will do, and makes building a reasonable site possible for someone who has very little knowledge. Once you have sorted the code out I probably will need to talk to you again when it comes to uploading to server as I can see from the forums that this seems to be a weekness of the system also. Thanks for your cheerful reply to my utterly unreasonable previous communication and I look forward to you solving all my problems. I think' IT' is the only business in the world where people pay good money for products that don't work and are then told to go and chat amongst themselves on forums to see if they can solve the problems collectively. Couldn't resist that one I'm afraid. Old and grumpy! I hope you can access the code. I have no idea where it is but I copied it here in the html frame. I even find it difficult to use this forum. User friendly!
ie8 html5 video creator by EasyHtml5Video.com v1.8

Constant problems with logic 8 (only in last 2 weeks)

Hi,
I've been using logic pro 8 since the day it came out, and have had hardly any problems with it.
Now all of a sudden it is crashing all the time, sometimes it just totally loses sound and my monitors just click and pop, or other times i get random 'blasts' of white noise through my left monitor!!
I put snow Leopard on a few days ago and it appears to be worse than ever for crashing now.
Anyone else had similar problems or know what the deal is here?
Many thanks
Tom

John Alcock wrote:
Interesting. There are many reports of this noise, but all (AFIAK) with Logic 9, not 8. I've had the same problem with LP9 but haven't with 8.
http://discussions.apple.com/thread.jspa?threadID=2144002&tstart=200
See if there's anything in that thread which helps.
Today I had this white noise bursts for the 1st time since I upgraded to LP9...the project is super simple...an audio track - flexed and muted ...and the bounce in place regions created from that on a second audio track...I was doing some fades so I was moving back and forth to the regions to listen and adjust the fades...
It's really loud and I'm glad I wasn't wearing headphones...
I check the link you posted ......
A

Constant problems with external HD used for time machine.

I have had numerous problems with my backup disk and can't seem to solve the problem... I often get errors with disk not ejecting properly, sometimes when the iMac has gone to sleep, sometimes not. Often the Mac won't recognise the disk when plugged back in (it recognises the other partition though). I can get the disk in disk utility sometimes, but if I run repair disk it finds a lot of errors and tells me it can't fix the disk. I'm told to Backup, format the disk etc.
Running yosemite on a 2008 iMac - disk is Hitachi 1TB usb powered (plugged straight in to iMac). I have prevented spotlight from indexing the HD.
Any advice ideas? Thanks in advance.

applejoose wrote:
I can't because it's a specific type.
Is it hard-wired to the enclosure? If not, examine the connectors and compare with what is available. I doubt that it has a connector that is unique to this particular drive.
If you choose to replace the drive, don't get another manufacturer-branded external. They are often "crippled" so that they can't be used in anything other than the generally cheap enclosure in which they are packaged, or only usable if you re-format them. Here's a comment from a recent Macintouch thread on new Seagate 5TB externals (http://www.macintouch.com/readerreports/harddrives/index.html#d23mar2015):
A word of warning for those who want to rip out their drive. If you have data on it, it will only be read by Seagate controllers such as its original case or the GoFlex adapters. If you stick it in something like an IcyDock, it cannot be read and require a reformat. If you used it with another controller, it cannot be read when you put it back on the Seagate controllers.
A good quality enclosure, such as the OWC Mercury aluminum cases, is a good investment. You can choose the drive you install, and you usually get a better drive warranty that way.

Constant Problems with ITunes

I have two continuing problems with ITunes which are incredibly annoying.
When I start Itunes on about one in three occasions it immediately shuts down again.
And it regularly shuts down after ripping a cd but without ripping the final track of the cd - and this happens irrespective of the number of tracks on the cd.
I have tried reinstalling itunes but it does not cure the problem.
Never had any problems with previous versions of ITunes. GRrrrrrrrrrrrrrr!!!!!!!!!!
Windows XP Pro

Welcome to Apple Discussions!
Try this similar article and see what it will do:
http://docs.info.apple.com/article.html?artnum=61711
Also-everything's up to date, right? iPod and iTunes?
http://www.apple.com/ipod/download
http://www.apple.com/itunes/download
Try switching the USB ports as well.
If not, post back and we can try a few other alternatives
rjl

Problems with wrt54gs v. 06

I keep losing internet acess on all computers with this router. Now when I hook my old router back up that is a linksys b router it works fine but then i hook the g router back up no internet. I have did the powercycle and it didn't work. I notice the G routers been having this problem.

Ok it keeps disconnecting from my the computer its hooked up too. And I updated the firemware it stayed on for one day. Then i powered up the computer the next day it wouldn't work. and this is all the computer the wired one and the wireless ones (I have a laptop and another desk top connected wirelessly). It just annoying that I have to keep hooking up the b router cause the g one keeps cutting off. I have Windows XP on all the computers. I got the Usb adaptor on the desktop and My dell has the Intel Pro Wireless 2200 b/g card. once I get connection on my computer that has the router hooked up to it I have no problems with the wireless ones.

Constant "Problem with Shortcut" Every Time iTunes updates

Sorry to vent, but this really bugs me.
Ok, this can't be hard to fix and isn't hard for ME to fix when I update iTunes, but this is REALLY, REALLY, REALLY annoying.
Here's the issue. Every time iTunes updates itself, it invalidates every Shortcut for the executable. I get "Problem with Shortcut" Windows Window and which says "This action is only valid for products that are currently installed."
This happens EVERYTIME iTunes updates itself, which seems very often.
It is really, really annoying. And it ONLY happens with iTunes (no other software - for example Firefox doesn't do this), which says to me that Apple can't be bothered to make sure that the path to their new executable is the same as the old when they do the update. Actually, now that I look at it, it looks like it is somehow deleting the path in the existing shortcuts when it updates, which sounds like a bug.
Any decent usability testing would find this and quickly fix this, but this happens on EVERY windows computer I have EVERY time iTunes updates itself, and it has been there for at least the last 5 upgrades, so I know it is not a 1 off thing only I am seeing.
Please, please, please fix this in your next patch.
Thanks.

Add me to the list of the angry. Safari on Windows does this too.
Apple apps are the only ones I've ever seen on Windows to do this. I don't even understand how/why it happens - does it take the time to find all the shortcuts (which are separate files it would have to search your HD for) and deliberately break their paths?! If Apple are going to make windows applications, it'd be nice if they swallowed their pride and learnt the windows platform and its norms. 99.999% of other software vendors have figured out how to make shortcuts that work...
The worst thing about this is that the error message (admittedly, I think it's a windows message) gives the impression you have to reinstall iTunes! A quick Google search shows that a fair few people think that's the solution.
*If you're getting this problem: there's no need to uninstall or reinstall iTunes!* the problem is with the shortcut only, not the program. To fix it, find a working shortcut to iTunes (as mentioned above, there's normally a fresh one in your start menu somewhere) and drag it wherever you need it, then delete the old one. If you can't find a working one, browse to "program files"->"itunes" on your hard drive, select itunes.exe, go to File->Create Shortcut. A new shortcut will be made in that folder, that you can put wherever you like.

Constant problem with WRT54GS

Similar Messages

Maybe you are looking for