Constant problems with logic 8 (only in last 2 weeks)
Hi,
I've been using logic pro 8 since the day it came out, and have had hardly any problems with it.
Now all of a sudden it is crashing all the time, sometimes it just totally loses sound and my monitors just click and pop, or other times i get random 'blasts' of white noise through my left monitor!!
I put snow Leopard on a few days ago and it appears to be worse than ever for crashing now.
Anyone else had similar problems or know what the deal is here?
Many thanks
Tom
John Alcock wrote:
Interesting. There are many reports of this noise, but all (AFIAK) with Logic 9, not 8. I've had the same problem with LP9 but haven't with 8.
http://discussions.apple.com/thread.jspa?threadID=2144002&tstart=200
See if there's anything in that thread which helps.
Today I had this white noise bursts for the 1st time since I upgraded to LP9...the project is super simple...an audio track - flexed and muted ...and the bounce in place regions created from that on a second audio track...I was doing some fades so I was moving back and forth to the regions to listen and adjust the fades...
It's really loud and I'm glad I wasn't wearing headphones...
I check the link you posted ......
A
Similar Messages
-
I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.
This issue can be caused by the Babylon Toolbar 1.1.8 extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
The Problems With Logic (as I see them) - PART TWO!
Hello again,
It seems to be a tradition now that as I compose on a track, I keep a text editor open so that I can jot down all the annoyances and problems that I encounter during my creative process... Anyone who missed the previous edition of this topic, please visit PART ONE, here:
http://discussions.apple.com/message.jspa?messageID=3605456#3605456
That said, here I give you "The Problems With Logic Part II":
1. Logic should clear the playback buffer everytime you play. Quite often you start playing and there is trailing reverb/note events from various audio instruments and plug-ins.
2. The sample edtor "save selection as" has no memory of where you previously were in the file browser.
3. If you double click on a wave form, the sample editor opens up with the wave form you double clicked on... Great.. But now, if you go and double click on another wave form somewhere, it just takes you back to the sample editor with the same previous wave form selected (not great). This is incredibly annoying if you are attempting to save out certain edits-- Quite often you will end up saving 5 or 6 of the same exact waveform, thinking you were saving each individual one. GRR!
4. Key commands.. if you try to assign a key command to something that is already used by another feature, you are presented with a window warning you that it already exists.. If you click cancel, then you can no longer enter any keys in the key field.. You are forced to close the key commands preferences window and start over.
5. Key command window: You should be able to search by command.. For example, if I want to find out what "o" is assigned to, I should be able to search by O-- Further, you should be able to sort the key commands by clicking the column titles "key", "command" -- or "midi"... After all, we can sort by name, date, size, etc in the finder by clicking on these column titles.
6. Tempo Tap feature-- I am quite confused by this. There should be a simple way to tap and define a tempo. When ever i try to do this, the tempo is only temporarily changed until I stop playing, and most of the time I get error alerts about trying to sync audio and midi (mind you, when there are absolutely no parts in the entire arrange window). The manual states that with "tempo recording" checked on the tempo interpreter window, that the taps will record tempo changes, but this does not work. I tried doing this, tapping the key command I defined to tempo tap (ctrl-shift-t), and I was tapping at various speeds-- many taps fast.. and Logic recorded tempos of 99-101bpm.. I was tapping atleast around 175-180bpm. I then tried tapping slowing, and Logic recorded tempos of 99-101 again... so this feature obviously is full of bugs.
7. When loading songs, as soon as various plugins such as Kontakt, exs24 begin loading samples, it brings logic to the front. If you're working in the background in other applications while waiting for your songs to load, you are rudely interrupted from what you're doing (such as, selecting from a menu, typing a document, etc) only to be forced to watch a status bar fill up.. and then all key presses at that point become error beeps.
8. Logic's sample memory easily becomes messed up and crazy. Quite often when using AU instruments such as BFD, Culture, and even Synthogy's Ivory. I will switch to that particular track to play on my keyboard, and each sample will be full of horrible pops and clicks-- the kind that destroy speakers. Other times, in a sample of a string for instance, all of a sudden after one second will be a pop and then the sample will be playing at a completely different pitch... I have to remove the AU instrument and reload it at this point.. This happens quite often. Logic should offer a 'buffer reset' so that you can just flash plugins but they reload whatever preset they were set to.
9. Volume faders resolution are lame! There is no reason why you shouldnt be able to access +1.0, +1.1, +1.2, +1.3, +1.4, +1.5, +1.6, +1.7, +1.8, +1.9... Further the display is only so wide and you can't even read the decimal values for numbers -10 and lower. They just appear as 10.
10. When a movie is open, and you are viewing the video output via FIREWIRE, there is a mini-floating window which contains the smpte, position, and movie start information-- However you cannot modify any of these values. You have to switch video output back to "WINDOW" to change the start position of the movie. This is obviously a bug.
11. Changing the movie's start time is very user unfriendly. There should be a simple way to specify to start at a moment of time relative to SMPTE-- So you can just say "+9:15" for example, and it would take you in 9 minutes and 15 seconds, rather than how it is now where you have to think backwards from SMPTE code and subtract.
12. You cannot view video as a window AND output to firewire. There is no reason why you shouldn't be able to do this. For example, if I wanted to output my video to a monitor in a vocal booth-- I can do this.. but I can't see what the vocalist is seeing on my own screen! This is just nonsense. You should be able to output to the screen (desktop mode or floating window) as well as an external firewire device.
13. Saving a song with a movie open should mean that when you load that song, the movie should be up and exactly as it was prior to saving. As it is now you have to select "open movie again".
14. There is still definitely a bug in track automation-- this was really bad back in version 4, but there is still something not quite right here where starting playback will not always guarantee that the automation data is being read.. And in my experiences it results in volumes being incorrect until you stop and play again, and in some cases it will not work at all unless you plot some automation points. This is an intermittent issue-- but quite often activated by placing an audio region from the audio window on a track (SEE VIDEO).
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicautomationbug.mov
15. In the arrange window, sometimes when zoomed in tightly, all parts on a track are selected, and you think that only the part that you are looking at is selected.. you move this part, and now all of your parts are off. Logic should have some kind of visual aid to let you know when ever you are moving multiple selections... Something like, the parts you are moving will highlight a dfferent color or something... This is a similar problem I have with the loop area of the screen.. You can accidentally turn it on when in the matrix window, and have no idea unless you look down at the transport, but with me for example, my transport is at the very bottom of the screen and I am not looking there most of the time.
16. Automation data, when two points are semi-close to each other, suddenly the value of the data is no longer shown.. I can understand that when you are zoomed out, and there is simply no space for this to visually appear, that's appropriate. But as it is now, it doesn't display this information when there is plenty of space for it to be visible.
17. Logic should let you set audio track inputs to the various outputs (1-2, 3-4, etc) and buses.
18. clicking on a track selects ALL parts. This is so so so annoying. How many times have I been editing voice over, and selecting a track, thinking I am shrinking the length of a part, and to find that ALL parts have been shrunk.. SO ANNOYING!!!! This needs to not happen, and there should be a simple way to right-click a track and it will have an option "select all regions"... also, when you click on a track and all parts are selected, if you horizontally zoom, logic zooms into the beginning of the track, rather than the song locator. I don't know what the LOGIC behind this is, but it's not very helpful, it actually is very frustrating.. Zooming should always move towards the song locator position.
19. EXS 24 should have a "reverse/backwards" button so that samples played are backwards.
20. Logic should offer a way to globally increase or decrease a specific automation type (especially volume) globally for all tracks... So if you have detailed crescendos that start at -3.8 and end at +1.6, you can add 3db to this and it will now be at 0.8 and end at 4.6.
21. If you have multiple tracks of the same track (such as three Audio track #1's)-- say you are recording guitar parts, and just copying the track and muting the previous track as a method of maintaining multiple takes for later auditioning. If you draw automation volume data on this track (it appears on all 3 tracks), and then if you delete the audio from one of the muted tracks and tell logic to KEEP it, suddenly all automation data is gone. GRR!!!
22. Several times I have opened Kontakt, and attempted to load an instrument while outputting a movie via firewire video to my monitor. As soon as I try to load the instrument, the firewire video output on my monitor goes crazy, and then comes back on.. Logic then crashes. This has happened 3 times randomly...
23. UNDO does not work on every function. for example, if you change an output to bus 1 instead of 1-2, you cannot undo this. Undo should undo whatever the last command was, no matter what it was. This is what the word LOGICal is supposed to represent.
24. Floating windows (as in plugin windows) should close with apple-w!!!
25. *BUG* If you are in a part that is say 10 measures long, zoom in horizontally 100% in the matrix window-- You then isolate one specific quarter note pitch in the middle of this measure, and have cycle turned on, looping over this one quarter note, if you are not looking at this note event/loop region when you hit play, the display will jump to the beginning of the part and never show you this note event as it loops. However if you have the note event on screen when you hit play, then it will behave properly. This makes it extremely difficult and frustrating to perform detailed hyper-draw work. (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicloopbug.mov
26. *BUG* Host Automation is not accurate. I assigned Kontakt's tune knob to C#000, and If I place a dip, the knob begins to move way before the automation data is even present.... So basically what I was trying to do, can't even be accomplished because Logic screws everything up by pitching the instrument too early... Such a shame.. By the way, I previously mentioned the importance of being able to display part data in the arrange window as matrix data (horizontal lines) rather than score data. Someone argued what good this would do-- Well this is a perfect example, if I am attempting to affect a particular section of a note with automation, I can't possible visually see where this is because the length is not described by the current score representation. Having a horizontal representation would solve this problem... (SEE VIDEO)
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/www/logicbugs/logicctrlchngbug.mov
27. There should be a way to convert stereo samples to mono in the sample editor.
28. When you view "as text" in the environmentt, you cannot drag an object to the arrange window-- Such as to create a bus track.. Now mind you I don't know why you can't just select "BUS" when editing a track in the arrange window in the first place, however there is no reason why 'view as text' should behave differently than when it's viewed as icons.
29. When you drag a bus from the environment to the arrange window, it replaces whatever track was there. It should ADD a track instead of replace-- atleast there should be a preference for how this behaves.
30. Occasionally when dragging a bus from the environment, there is some visual garbage in the track automation (see screenshot).
31. There should be a way to LOAD and SAVE selections in the arrange window. Quite often when editing audio from a countless number of parts/regions, it becomes painful when you have to select and move 100s of audio files. There should be a way that you can just select a ton of regions and save that selection, and reload it at anytime. There are a few 'select' tools/options under the edit window, however they are song specific-- not track specific. So they are completely usesless for what I need.
32. Logic should offer a feature to collect sysex data from midi devices so that patch names show up and can be selected via program change.
33. When no track or part is selected, and you vertically zoom in, Logic should zoom into the center most track.. It behaves very oddly and zooms in more towards the top. This becomes extremely annoying when dealing with a sequence involving 100 tracks, and a part is selected but you scroll far below where the part is.. When you begin to zoom in, it takes you towards the selected part, yet it's not displayed on the screen and you have no reference for what you are even looking at. The rule should be this: If the part is on the screen, zooming vertically will bring you to it. If it's off the screen, you will zoom into the center track of whatever is currently on the screen.
34. I mentioned this in a thread earlier... http://discussions.apple.com/thread.jspa?threadID=752485&tstart=0
There is a bug when using the transform tool involving the 'position' variable. In my example, I was attempting to reverse the time placement of three chords, that occured in a part somewhere in the middle of my song. By selecting the measure start and end of this part, Logic was unable to select or operate with the transform tool (and I tried a variety of transform options). If I moved this part to the beginning of the song, then the transform tool would suddenly work. After some research, I found online someone had said "Position Time position of the event, referenced to the start of the MIDI Region (not of the song)."--- But if I still doubt this is true, because I then placed the part on a new track with no other data, and placed it in the middle of the sequence and in the transform tool under position I selected '1 1 1 1' to '5 5 5 5' as well i tried setting the position to 'all', and none of this worked. This obviously is a bug... If it's not then it's a very serious design flaw. The position should relate to measure numbers of a song, and nothing else.
WATCH VIDEO OF THIS BUG:
http://collinatorstudios.com/video/transform.mov
That is all for now...
For those who firmly agree with me and all of the points that I have brought up now and in the past, I encourage you to contact Peggie Louie, (the Logic HR department contact) at (408) 996-1010 and suggest that she hire me as a consultant to help eliminate Logic's many annoyances. I have tried to pursue this heavily in the past, but sadly I was completely ignored by her on all levels. Maybe you all can help make a difference?
Fighting the good fight,
Patrick J. Collins
http://collinatorstudios.com11. Changing the movie's start time is very user
unfriendly. There should be a simple way to specify
to start at a moment of time relative to SMPTE-- So
you can just say "+9:15" for example, and it would
take you in 9 minutes and 15 seconds, rather than how
it is now where you have to think backwards from
SMPTE code and subtract.
For this one I'd suggest getting SMPTE calculator. Entering timecode numbers and having to add and subtract is not so difficult, and AFAIC part of a composer's gig. But what I would add, instead, is that it would be fantastic if Logic provided a timecode calculator (edit: even if it was in the form of a custom Logic widget).
13. Saving a song with a movie open should mean that
when you load that song, the movie should be up and
exactly as it was prior to saving. As it is now you
have to select "open movie again".
This doesn't always happen. I've struggled with this for a long time, and I don't know why sometimes the movie will load and not other times. I would also add here that Logic should show the file pathname to the movie. Somewhere...
18. clicking on a track selects ALL parts. This is
so so so annoying.
You can prevent this from happening if you have cycle turned on and set to a set of locators that "contain" the parts you might want to select en masse. I always work with cycle=on so this is not a problem.
21. If you have multiple tracks of the same track
(such as three Audio track #1's)-- say you are
recording guitar parts, and just copying the track
and muting the previous track as a method of
maintaining multiple takes for later auditioning. If
you draw automation volume data on this track (it
appears on all 3 tracks), and then if you delete the
audio from one of the muted tracks and tell logic to
KEEP it, suddenly all automation data is gone.
GRR!!!
Never had that happen. In my experience, telling Logic to keep the data always works.
23. UNDO does not work on every function. for
example, if you change an output to bus 1 instead of
1-2, you cannot undo this. Undo should undo whatever
the last command was, no matter what it was. This is
what the word LOGICal is supposed to represent.
Undo in Logic is highly problematic for other reasons. Here, I think there should be a specific Environment Undo, just like there's a separate undo for audio edits.
29. When you drag a bus from the environment to the
arrange window, it replaces whatever track was there.
It should ADD a track instead of replace-- atleast
there should be a preference for how this behaves.
Right. This is a matter of personal preference. But still there are other ways to get an object assigned to a track. The "thru tool", for instance. No dragging required.
32. Logic should offer a feature to collect sysex
data from midi devices so that patch names show up
and can be selected via program change.
My guess: considering how much sheer time it takes to write this kind of software, let alone debug it with every conceivable device, it's not likely this is going to happen.
That is all for now...
For those who firmly agree with me and all of the
points that I have brought up now and in the past, I
encourage you to contact Peggie Louie, (the Logic HR
department contact) at (408) 996-1010 and suggest
that she hire me as a consultant to help eliminate
Logic's many annoyances. I have tried to pursue this
heavily in the past, but sadly I was completely
ignored by her on all levels. Maybe you all can help
make a difference?
Wait in line buddy!
(LOL)
I must say, I'm very impressed with your list and attention to detail. And I feel your pain, trust me. But many of the things you've listed are feature requests and not bugs. And some of the behaviors you've described I have yet to run across. So this is typical with Logic, that it can be operated in so many diverse ways that no two people run it in the same way, nor would two people conceive the program's capabilities in the same way. But I digress...
I also think there's a certain amount of Logic convention that I don't think you've adopted yet, hence your wish for behaviors that don't yet exist.
I don't disagree with most of your feature requests, and I'm (quite unfortunately) able to say that I'm familiar with most of these bugs and about 9 dozen more. But again, it's important to distinguish between bug, feature request, time to RTFM, and errant behavior that's experienced by a very limited number of users.
There's no doubt that this program has its problems. In particular, your #1 re the playback buffer. And I'm glad you've brought many of the bugs into the light for people to read. Good work. -
I have a problem with iMovie since the last update to 9.0.7
I have a problem with iMovie since the last update to 9.0.7 when you press the camera button to import iMovie vypíče stops and an error message. Or he'll file> import from camera so iMovie also quits.
Process: iMovie [892]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovieApp
Version: 9.0.7 (1768)
Build Info: iMovieApp-1768000000000000~2
App Item ID: 408981434
App External ID: 9556074
Code Type: X86 (Native)
Parent Process: launchd [268]
User ID: 501
Date/Time: 2012-07-29 20:23:32.029 +0200
OS Version: Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report: 8984 sec
Crashes Since Last Report: 14
Per-App Interval Since Last Report: 280 sec
Per-App Crashes Since Last Report: 14
Anonymous UUID: 0EBB5AAE-B67D-4EFD-AA84-E30FBE793426
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000007bef5184
VM Regions Near 0x7bef5184:
__LINKEDIT 000000007016d000-00000000701d2000 [ 404K] r--/rwx SM=COW /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio
--> MALLOC_TINY 000000007be00000-000000007bf00000 [ 1024K] rw-/rwx SM=COW
MALLOC_SMALL 000000007c000000-000000007c800000 [ 8192K] rw-/rwx SM=PRV
Application Specific Information:
Performing @selector(a_noCaptureDevicesAvailable:) from sender MediumButton 0x7cd87010
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 ??? 0x7bef5184 0 + 2079281540
1 com.apple.CMIOQTUnits 0x0eeff19b 0xeed4000 + 176539
2 com.apple.CMIOQTUnits 0x0eeff5bf 0xeed4000 + 177599
3 com.apple.CMIOQTUnits 0x0eedca8c 0xeed4000 + 35468
4 com.apple.CMIOQTUnits 0x0eef9caa 0xeed4000 + 154794
5 com.apple.QTKit 0x9a4e936c +[QTCaptureVDIGDevice _refreshDevices] + 470
6 com.apple.QTKit 0x9a4e8ff4 +[QTCaptureVDIGDevice devicesWithIOType:] + 78
7 com.apple.QTKit 0x9a44c8c6 +[QTCaptureDevice devicesWithIOType:] + 199
8 com.apple.QTKit 0x9a439508 +[QTCaptureDevice inputDevices] + 41
9 com.apple.QTKit 0x9a43944f +[QTCaptureDevice inputDevicesWithMediaType:] + 36
10 com.apple.iMovieApp 0x000b5d83 0xaa000 + 48515
11 com.apple.iMovieApp 0x000b4195 0xaa000 + 41365
12 com.apple.iMovieApp 0x000ca004 0xaa000 + 131076
13 com.apple.iMovieApp 0x000cc720 0xaa000 + 141088
14 com.apple.iMovieApp 0x000c9cac 0xaa000 + 130220
15 com.apple.iMovieApp 0x000cc9b8 0xaa000 + 141752
16 com.apple.iMovieApp 0x000baa8b 0xaa000 + 68235
17 com.apple.iMovieApp 0x000e32a3 0xaa000 + 234147
18 libobjc.A.dylib 0x9a3285d3 -[NSObject performSelector:withObject:] + 70
19 com.apple.AppKit 0x94f019a2 -[NSApplication sendAction:to:from:] + 436
20 com.ecamm.iglasses 0x054d14ef newsendAction + 63
21 com.apple.iMovieApp 0x000fbbdc 0xaa000 + 334812
22 com.apple.AppKit 0x94f017b0 -[NSControl sendAction:to:] + 102
23 com.apple.AppKit 0x94f016bf -[NSCell _sendActionFrom:] + 159
24 com.apple.AppKit 0x94effc30 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 1895
25 com.apple.AppKit 0x94eff46f -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 511
26 com.apple.AppKit 0x94efeb89 -[NSControl mouseDown:] + 867
27 com.apple.AppKit 0x94ef6841 -[NSWindow sendEvent:] + 6968
28 com.apple.iMovieApp 0x002219db 0xaa000 + 1538523
29 com.apple.AppKit 0x94ef181f -[NSApplication sendEvent:] + 4278
30 com.apple.iMovieApp 0x000fb90c 0xaa000 + 334092
31 com.apple.AppKit 0x94e0b73c -[NSApplication run] + 951
32 com.apple.AppKit 0x94dae8e6 NSApplicationMain + 1053
33 com.apple.iMovieApp 0x000ac62a 0xaa000 + 9770
34 com.apple.iMovieApp 0x000ac195 0xaa000 + 8597
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x97819c02 __select_nocancel + 10
1 libdispatch.dylib 0x9a006a5c _dispatch_mgr_invoke + 376
2 libdispatch.dylib 0x9a0067fd _dispatch_mgr_thread + 53
Thread 2:
0 libsystem_kernel.dylib 0x9781a0ee __workq_kernreturn + 10
1 libsystem_c.dylib 0x92f7004c _pthread_workq_return + 45
2 libsystem_c.dylib 0x92f6fe19 _pthread_wqthread + 448
3 libsystem_c.dylib 0x92f57cca start_wqthread + 30
Thread 3:
0 libsystem_kernel.dylib 0x9781a0ee __workq_kernreturn + 10
1 libsystem_c.dylib 0x92f7004c _pthread_workq_return + 45
2 libsystem_c.dylib 0x92f6fe19 _pthread_wqthread + 448
3 libsystem_c.dylib 0x92f57cca start_wqthread + 30
Thread 4:
0 libsystem_kernel.dylib 0x978177d2 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97816cb0 mach_msg + 68
2 com.apple.CoreFoundation 0x984efcc9 __CFRunLoopServiceMachPort + 185
3 com.apple.CoreFoundation 0x984f56af __CFRunLoopRun + 1247
4 com.apple.CoreFoundation 0x984f4d6a CFRunLoopRunSpecific + 378
5 com.apple.CoreFoundation 0x98504781 CFRunLoopRun + 129
6 com.apple.FWAVCPrivate 0x039c672f AVS::AVCVideoServicesThreadStart(AVS::AVCVideoServicesThreadParams*) + 266
7 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
8 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 5:
0 libsystem_kernel.dylib 0x9781a0ee __workq_kernreturn + 10
1 libsystem_c.dylib 0x92f7004c _pthread_workq_return + 45
2 libsystem_c.dylib 0x92f6fe19 _pthread_wqthread + 448
3 libsystem_c.dylib 0x92f57cca start_wqthread + 30
Thread 6:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x97819be6 __select + 10
1 com.apple.CoreFoundation 0x98539320 __CFSocketManager + 1632
2 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
3 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 7:
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72289 _pthread_cond_wait + 938
2 libsystem_c.dylib 0x92f72512 pthread_cond_timedwait_relative_np + 47
3 com.apple.CoreServices.CarbonCore 0x987e36b9 TSWaitOnConditionTimedRelative + 177
4 com.apple.CoreServices.CarbonCore 0x987e3190 TSWaitOnSemaphoreCommon + 272
5 com.apple.CoreServices.CarbonCore 0x987e3419 TSWaitOnSemaphoreRelative + 24
6 ??? 0x9412758c 0 + 2484237708
7 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
8 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 8:: com.apple.audio.IOThread.client
0 libsystem_kernel.dylib 0x978177d2 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97816cb0 mach_msg + 68
2 com.apple.audio.CoreAudio 0x959e3536 HALB_MachPort::SendMessageWithReply(unsigned int, unsigned int, unsigned long, unsigned long, mach_msg_header_t*, bool, unsigned int) + 138
3 com.apple.audio.CoreAudio 0x959de07c HALB_MachPort::SendSimpleMessageWithSimpleReply(unsigned int, unsigned int, int, int&, bool, unsigned int) + 70
4 com.apple.audio.CoreAudio 0x959dc8bb HALC_ProxyIOContext::IOWorkLoop() + 1389
5 com.apple.audio.CoreAudio 0x959dc2a1 HALC_ProxyIOContext::IOThreadEntry(void*) + 145
6 com.apple.audio.CoreAudio 0x959e626a ___ZN19HALC_ProxyIOContextC2Emj_block_invoke_0 + 20
7 com.apple.audio.CoreAudio 0x959dc1c3 HALB_IOThread::Entry(void*) + 69
8 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
9 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 9:
0 libsystem_kernel.dylib 0x9781780e semaphore_wait_trap + 10
1 ??? 0x945e17ce 0 + 2489194446
2 ??? 0x94195e06 0 + 2484690438
3 ??? 0x945e1560 0 + 2489193824
4 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
5 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 10:
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72289 _pthread_cond_wait + 938
2 libsystem_c.dylib 0x92f72512 pthread_cond_timedwait_relative_np + 47
3 com.apple.CoreServices.CarbonCore 0x987e36b9 TSWaitOnConditionTimedRelative + 177
4 com.apple.CoreServices.CarbonCore 0x987e3190 TSWaitOnSemaphoreCommon + 272
5 com.apple.CoreServices.CarbonCore 0x987e3419 TSWaitOnSemaphoreRelative + 24
6 com.apple.CoreServices.CarbonCore 0x9878481a AIOFileThread(void*) + 892
7 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
8 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 11:: jpegdecompress_MPLoop
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72289 _pthread_cond_wait + 938
2 libsystem_c.dylib 0x92fffb08 pthread_cond_wait + 48
3 ??? 0x9423e536 0 + 2485380406
4 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
5 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 12:
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72289 _pthread_cond_wait + 938
2 libsystem_c.dylib 0x92f72512 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x91fb4506 -[NSCondition waitUntilDate:] + 404
4 com.apple.Foundation 0x91fb432d -[NSConditionLock lockWhenCondition:beforeDate:] + 282
5 com.apple.Foundation 0x91fb9880 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x0de5c487 -[PluginLockPair scanPaths] + 540
7 com.apple.Foundation 0x91f86318 -[NSThread main] + 45
8 com.apple.Foundation 0x91f8629b __NSThread__main__ + 1396
9 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
10 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 13:
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72289 _pthread_cond_wait + 938
2 libsystem_c.dylib 0x92f72512 pthread_cond_timedwait_relative_np + 47
3 com.apple.Foundation 0x91fb4506 -[NSCondition waitUntilDate:] + 404
4 com.apple.Foundation 0x91fb432d -[NSConditionLock lockWhenCondition:beforeDate:] + 282
5 com.apple.Foundation 0x91fb9880 -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proapps.MIO 0x0de5c487 -[PluginLockPair scanPaths] + 540
7 com.apple.Foundation 0x91f86318 -[NSThread main] + 45
8 com.apple.Foundation 0x91f8629b __NSThread__main__ + 1396
9 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
10 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 14:
0 libsystem_kernel.dylib 0x978177d2 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97816cb0 mach_msg + 68
2 com.apple.framework.IOKit 0x9227ccd6 io_connect_method + 404
3 com.apple.framework.IOKit 0x9222503d IOConnectCallMethod + 520
4 com.apple.framework.IOKit 0x922252f1 IOConnectCallStructMethod + 84
5 com.apple.iokit.SCSITaskLib 0x0ee92a8a MMCDeviceUserClientClass::ModeSense10(unsigned char, unsigned char, unsigned char, unsigned char, void*, unsigned short, SCSITaskStatus*, SCSI_Sense_Data*) + 220
6 com.apple.iokit.SCSITaskLib 0x0ee91e77 MMCDeviceUserClientClass::sModeSense10(void*, unsigned char, unsigned char, unsigned char, unsigned char, void*, unsigned short, SCSITaskStatus*, SCSI_Sense_Data*) + 81
7 com.apple.DiscRecording 0x95e07f43 DRDevicePlugIn::ExecuteMMCDeviceTask(DRExecuteSCSITaskParam*, __DRSenseInfo*) + 815
8 com.apple.DiscRecording 0x95e07b13 DRDevicePlugIn::ExecuteSCSITask(DRExecuteSCSITaskParam*, __DRSenseInfo*) + 71
9 com.apple.DiscRecording 0x95e07984 DROpticalDevice::ExecuteSCSITask(DRExecuteSCSITaskParam*, __DRSenseInfo*) + 250
10 com.apple.DiscRecording 0x95e0761b DROpticalDevice::ModeSense10(unsigned char, void*, unsigned short*) + 323
11 com.apple.DiscRecording 0x95e074a8 DROpticalDevice::GetCDCapabilitiesPage(__CDCapabilitiesPage*) + 120
12 com.apple.DiscRecording 0x95e0629a DROpticalDevice::InitializeState() + 924
13 com.apple.DiscRecording 0x95e00c78 DROpticalDevice::Initialize(void*, __CFData const*, __CFString const*) + 228
14 com.apple.DiscRecording 0x95e008e0 _DRDeviceCreate(void*, __CFData const*, __CFString const*, __CFDictionary const*) + 253
15 com.apple.DiscRecording 0x95e007c0 -[DRDevice(InternalBridgeMethods) initWithRegistryPath:forGUID:usingProfile:] + 46
16 com.apple.DiscRecording 0x95e0078d -[DRDevice(InternalBridgeMethods) initWithRegistryPath:forGUID:] + 55
17 com.apple.DiscRecording 0x95e41ad6 _DRDeviceCreate + 172
18 com.apple.DiscRecording 0x95dffd14 DROpticalDevice::Create(__CFData const*, __CFString const*) + 24
19 com.apple.DiscRecording 0x95dffc53 DRDeviceManager::RegisterAuthoringDevice(__CFData const*, __CFString const*) + 57
20 com.apple.DiscRecording 0x95dffba7 DRDeviceManager::IOCDDeviceMatched(DRDeviceManager*, unsigned int) + 209
21 com.apple.DiscRecording 0x95dff812 DRDeviceManager::DRDeviceManager() + 402
22 com.apple.DiscRecording 0x95dff666 DRDeviceManager::Create() + 30
23 com.apple.DiscRecording 0x95dfe1a9 DRAutoInit::Initialize() + 759
24 com.apple.DiscRecording 0x95dfdcdf DRDeviceCopyDeviceForBSDName + 126
25 com.apple.MPEG2PSRADPlugin 0x0e73067d FenwayIsFolderSupported + 613
26 com.apple.MPEG2PSRADPlugin 0x0e723c71 -[FenRAD pathIsValidVolume:] + 120
27 com.apple.proapps.MIO 0x0de5c642 -[PluginLockPair mountPath:] + 290
28 com.apple.proapps.MIO 0x0de5c3d6 -[PluginLockPair scanPaths] + 363
29 com.apple.Foundation 0x91f86318 -[NSThread main] + 45
30 com.apple.Foundation 0x91f8629b __NSThread__main__ + 1396
31 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
32 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 15:: com.apple.bdplayback-DVDEventCallbackThread
0 libsystem_kernel.dylib 0x9781780e semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x0dfcdc9a semaphore_wait(viona_semaphore_t*) + 42
2 com.apple.AVCHDPlugin 0x0dfdb2bd WinPortServer::ProcessMessages() + 133
3 com.apple.AVCHDPlugin 0x0dfcd300 ST20Thread::Run(PThreadRunParams*) + 38
4 libsystem_c.dylib 0x92f71014 _pthread_body + 72
Thread 16:: com.apple.bdplayback-TFThread
0 libsystem_kernel.dylib 0x978198e2 __psynch_cvwait + 10
1 libsystem_c.dylib 0x92f72220 _pthread_cond_wait + 833
2 libsystem_c.dylib 0x92ff80ad pthread_cond_wait$UNIX2003 + 71
3 com.apple.AVCHDPlugin 0x0e0eb58c WindowsEvent::Wait(int) + 86
4 com.apple.AVCHDPlugin 0x0e11b4e1 IdleFiberEntry(void*) + 305
5 com.apple.AVCHDPlugin 0x0dfcd300 ST20Thread::Run(PThreadRunParams*) + 38
6 libsystem_c.dylib 0x92f71014 _pthread_body + 72
Thread 17:: com.apple.bdplayback-OSXMessageThread
0 libsystem_kernel.dylib 0x9781780e semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x0dfcdc9a semaphore_wait(viona_semaphore_t*) + 42
2 com.apple.AVCHDPlugin 0x0dfdb2bd WinPortServer::ProcessMessages() + 133
3 com.apple.AVCHDPlugin 0x0dfcd300 ST20Thread::Run(PThreadRunParams*) + 38
4 libsystem_c.dylib 0x92f71014 _pthread_body + 72
Thread 18:: com.apple.bdplayback-DDPTask
0 libsystem_kernel.dylib 0x9781780e semaphore_wait_trap + 10
1 com.apple.AVCHDPlugin 0x0dfcdc9a semaphore_wait(viona_semaphore_t*) + 42
2 com.apple.AVCHDPlugin 0x0dfdb2bd WinPortServer::ProcessMessages() + 133
3 com.apple.AVCHDPlugin 0x0df88bc1 ScheduleRoutine + 81
4 com.apple.AVCHDPlugin 0x0dfcd300 ST20Thread::Run(PThreadRunParams*) + 38
5 libsystem_c.dylib 0x92f71014 _pthread_body + 72
Thread 19:
0 libsystem_kernel.dylib 0x9781991a __psynch_mutexwait + 10
1 libsystem_c.dylib 0x92f7313b pthread_mutex_lock + 595
2 com.apple.DiscRecording 0x95dfdefc DRAutoInit::Initialize() + 74
3 com.apple.DiscRecording 0x95dffa40 DRDiskArbitor::DiskAppearedCallback(__DADisk*, void*) + 30
4 com.apple.DiskArbitration 0x902f6b8b _DADispatchCallback + 99
5 com.apple.DiskArbitration 0x902f68c0 _DASessionCallback + 320
6 com.apple.CoreFoundation 0x984c01ef __CFMachPortPerform + 303
7 com.apple.CoreFoundation 0x984c00a5 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 53
8 com.apple.CoreFoundation 0x984bfcd2 __CFRunLoopDoSource1 + 146
9 com.apple.CoreFoundation 0x984f59c6 __CFRunLoopRun + 2038
10 com.apple.CoreFoundation 0x984f4d6a CFRunLoopRunSpecific + 378
11 com.apple.CoreFoundation 0x98504781 CFRunLoopRun + 129
12 com.apple.DiscRecording 0x95dff285 DRWorkLoop::WorkLoop() + 273
13 com.apple.DiscRecording 0x95dff15d DRWorkLoop::WorkLoopEntry(DRWorkLoop*) + 17
14 com.apple.DiscRecording 0x95dfeefe DRThreadObject::StartRoutine(DRThreadObject*) + 142
15 com.apple.DiscRecording 0x95dfee6f DRThreadObject::SymbolRoutine(DRThreadObject*) + 17
16 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
17 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 20:
0 libsystem_kernel.dylib 0x978177d2 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97816cb0 mach_msg + 68
2 com.apple.CoreFoundation 0x984efcc9 __CFRunLoopServiceMachPort + 185
3 com.apple.CoreFoundation 0x984f56af __CFRunLoopRun + 1247
4 com.apple.CoreFoundation 0x984f4d6a CFRunLoopRunSpecific + 378
5 com.apple.CoreFoundation 0x984f4bdb CFRunLoopRunInMode + 123
6 com.apple.CoreMediaIO 0x92f1139f CMIO::DAL::RunLoop::OwnThread(void*) + 151
7 com.apple.CoreMediaIO 0x92f08938 CAPThread::Entry(CAPThread*) + 176
8 libsystem_c.dylib 0x92f6d557 _pthread_start + 344
9 libsystem_c.dylib 0x92f57cee thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x008505a7 ebx: 0x0eefc77d ecx: 0x0ef386a0 edx: 0x0ef3869c
edi: 0x857aa140 esi: 0x00000000 ebp: 0xbff55388 esp: 0xbff54b3c
ss: 0x00000023 efl: 0x00010246 eip: 0x7bef5184 cs: 0x0000001b
ds: 0x00000023 es: 0x00000023 fs: 0x00000000 gs: 0x0000000f
cr2: 0x7bef5184
Logical CPU: 0
Binary Images:
0xaa000 - 0x52ffef com.apple.iMovieApp (9.0.7 - 1768) <5BA2C2F7-B62A-3813-AC63-01FF73AF04A0> /Applications/iMovie.app/Contents/MacOS/iMovie
0x5f2000 - 0x608ff3 com.apple.iLifeFaceRecognition (1.0 - 21.1) <B06AF65E-3188-3361-BD75-3EE9B2DF4A68> /Applications/iMovie.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/iLifeFaceRecognition
0x618000 - 0x619ff3 com.apple.Helium (3.1.0 - 18567.3) <72A242AC-3BA7-3DD5-A043-000C7A9DCD11> /Applications/iMovie.app/Contents/Frameworks/Helium.framework/Versions/A/Helium
0x61e000 - 0x64cfe3 com.apple.MPEG2TSDecoder (1.0 - 84) <7E230E93-F7F6-34A2-8B60-E6F79E353426> /Applications/iMovie.app/Contents/Frameworks/Mpeg2TsDecoder.framework/Versions/ A/Mpeg2TsDecoder
0x686000 - 0x705ff7 com.apple.iLifeMediaBrowser (2.7.1 - 543) <679D1492-6CE0-3A36-85E7-B0B612CED18F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
0x749000 - 0x867ff3 com.apple.WebKit (8536 - 8536.25) <5365AA39-A1A7-315D-AA1C-0C564909C0E0> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x919000 - 0x91aff7 +com.bensyverson.dvmatte.autopicker (1.0 - 1.0) <EB13CAE4-1A5F-7C8E-F4FA-39C5B0A22636> /Applications/iMovie.app/Contents/Frameworks/DVMAutopick.framework/Versions/A/D VMAutopick
0x922000 - 0x923fff +eOkaoCom.dylib (1) <2DE16B47-23E7-73DB-1297-C928E40DFC31> /Applications/iMovie.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/Resources/eOkaoCom.dylib
0x928000 - 0x94dff2 +eOkaoPt.dylib (1) <831D49D0-43A0-21A0-2662-2207E3BE0FF6> /Applications/iMovie.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/Resources/eOkaoPt.dylib
0x955000 - 0x989fe7 +eOkaoDt.dylib (1) <5693A28E-8C94-0F5F-150E-3B17CF753F64> /Applications/iMovie.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/Resources/eOkaoDt.dylib
0x98f000 - 0xaf6fff +eOkaoFr.dylib (1) <E355FB47-C5EF-50CF-621A-9B17A50E2850> /Applications/iMovie.app/Contents/Frameworks/iLifeFaceRecognition.framework/Ver sions/A/Resources/eOkaoFr.dylib
0xafd000 - 0xd00feb com.apple.Helium.HeliumRender (2.1.0 - 18567.3) <A20BE37C-2987-3BB8-AA52-0607FE7CCF8C> /Applications/iMovie.app/Contents/Frameworks/Helium.framework/Versions/A/Framew orks/HeliumRender.framework/Versions/A/HeliumRender
0xd56000 - 0xdd7fe7 com.apple.Helium.Heliumfilters (2.1.0 - 18567.3) <3DCC7DCF-8734-31A0-9B6F-0139CC6CB71C> /Applications/iMovie.app/Contents/Frameworks/Helium.framework/Versions/A/Framew orks/HeliumFilters.framework/Versions/A/HeliumFilters
0x110e000 - 0x12cbfeb com.apple.Helium.HeliumSensoCore (2.0.2 - 18567.3) <BFA19728-C6DD-3D2D-BFF5-1099CBB20679> /Applications/iMovie.app/Contents/Frameworks/Helium.framework/Versions/A/Framew orks/HeliumSensoCore.framework/Versions/A/HeliumSensoCore
0x1301000 - 0x1f8bff3 com.apple.WebCore (8536 - 8536.24) <06F7EC1E-A7F2-37F1-ADC6-687284E661D8> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x39c2000 - 0x39f3ff3 com.apple.FWAVCPrivate (52.47 - 47) <14C9A9D3-4065-3395-A8BC-C0535162017E> /System/Library/PrivateFrameworks/FWAVCPrivate.framework/FWAVCPrivate
0x3a69000 - 0x3a76ffb com.apple.Librarian (1.1 - 1) <C8D82AA3-AE5E-3B6D-A8D1-847856057186> /System/Library/PrivateFrameworks/Librarian.framework/Versions/A/Librarian
0x3ab9000 - 0x3abcfef com.apple.LiveType.component (2.1.3 - 2.1.3) /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
0x3ac1000 - 0x3b26fde com.apple.LiveType.framework (2.1.3 - 2.1.3) /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
0x3b9e000 - 0x3b9ffff +com.ecamm.pluginloader (Ecamm Plugin Loader v1.0.5 - 1.0.5) /Library/InputManagers/*/Ecamm Plugin Loader.bundle/Contents/MacOS/Ecamm Plugin Loader
0x3bac000 - 0x3badffe com.apple.AddressBook.LocalSourceBundle (2.0 - 1143) <2D6A1C52-95F6-3BDF-BBEF-74A09A2642C1> /System/Library/Address Book Plug-Ins/LocalSource.sourcebundle/Contents/MacOS/LocalSource
0x3bb2000 - 0x3bb5ffe com.apple.DirectoryServicesSource (2.0 - 1143) <74F9B668-8028-334F-AC25-6A4588C5AFC9> /System/Library/Address Book Plug-Ins/DirectoryServices.sourcebundle/Contents/MacOS/DirectoryServices
0x4478000 - 0x447fffc com.apple.AppleGVAHW.component (1.1 - 1) <FC1BC394-2ACC-3611-B476-C3E991A901DE> /System/Library/QuickTime/AppleGVAHW.component/Contents/MacOS/AppleGVAHW
0x4527000 - 0x4549ffe libssl.0.9.7.dylib (106) <FC1F6C04-EAD3-39D1-8E25-B1192E89D98B> /usr/lib/libssl.0.9.7.dylib
0x54cc000 - 0x5500ff7 +com.ecamm.iglasses (v2.1.5 - 2.1.5) <3472A39E-58E9-1A03-6F10-E90966DE5D96> /Library/InputManagers/*/iGlasses.plugin/Contents/MacOS/iGlasses
0x551b000 - 0x5563ffb com.apple.CoreMediaIOServices (171.0 - 3244) <9563BB38-F23A-3FC6-855D-05487E700465> /System/Library/PrivateFrameworks/CoreMediaIOServices.framework/CoreMediaIOServ ices
0x5584000 - 0x55abff7 com.apple.CoreMediaPrivate (20.0 - 20.0) <D963392A-4B4C-3B81-A873-E1C06C6829E6> /System/Library/PrivateFrameworks/CoreMediaPrivate.framework/CoreMediaPrivate
0x5869000 - 0x58bafff com.apple.AddressBook.CardDAVPlugin (10.8 - 320) <8A8BD10E-04F2-385A-B93B-CD03E13BA4B6> /System/Library/Address Book Plug-Ins/CardDAVPlugin.sourcebundle/Contents/MacOS/CardDAVPlugin
0x58d7000 - 0x5937fff com.apple.coredav (1.0.1 - 179.4) <3E62FDFC-D3A7-3196-A11F-93F54FF44EB8> /System/Library/PrivateFrameworks/CoreDAV.framework/Versions/A/CoreDAV
0x5970000 - 0x597dffb com.apple.KerberosHelper (4.0 - 1.0) <6CB4B091-3415-301A-87B2-D9D374D0FC17> /System/Library/PrivateFrameworks/KerberosHelper.framework/Versions/A/KerberosH elper
0x5987000 - 0x5996ffd com.apple.NSServerNotificationCenter (5.0 - 5.0) <A9BF8310-F1D2-38EC-AA1A-5ECB479B89CE> /System/Library/Frameworks/ServerNotification.framework/Versions/A/ServerNotifi cation
0x59a1000 - 0x59a8ff7 com.apple.AOSNotification (1.7.0 - 636.2) <F68F735D-0B5C-3F27-9E39-FB296CF82958> /System/Library/PrivateFrameworks/AOSNotification.framework/Versions/A/AOSNotif ication
0x59b2000 - 0x5a0efff com.apple.corelocation (1.0 - 1239.35) <6E266E57-FA31-3B35-9CFD-29AA45B52C7B> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
0x5a3b000 - 0x5a6dff3 com.apple.GeoServices (1.0 - 1) <5D61BA20-171C-373D-A8F0-BCC02AD1DD81> /System/Library/PrivateFrameworks/GeoServices.framework/Versions/A/GeoServices
0x5a7f000 - 0x5a88fff com.apple.ProtocolBuffer (2 - 104) <BFA598AA-2E77-3578-B079-2C89796811B3> /System/Library/PrivateFrameworks/ProtocolBuffer.framework/Versions/A/ProtocolB uffer
0x8cda000 - 0x8e66ff8 GLEngine (8.5) <23C1BECF-D0EF-339D-B312-EFACB26C5983> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x8e9d000 - 0x8feeff7 libGLProgrammability.dylib (8.5) <27E2DAE2-DECE-364C-A1C2-138735A3869E> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x901c000 - 0x9028ffb libGPUSupport.dylib (8.5) <DCEDB13E-6E2C-3D14-965E-70522403723B> /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries/lib GPUSupport.dylib
0x902f000 - 0x905bffa GLRendererFloat (8.5) <1E69D3D7-1782-3FF8-AB52-3F23DC4F617B> /System/Library/Frameworks/OpenGL.framework/Resources/GLRendererFloat.bundle/GL RendererFloat
0x9064000 - 0x906cff2 libcldcpuengine.dylib (2.1.16) <61717F57-9AAC-31B4-8894-27A1BF7987B9> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/libcldcpuengin e.dylib
0x9073000 - 0x9075fff libCoreFSCache.dylib (24.4) <A089ED2E-0156-3937-BE32-5BED76DF4066> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreFSCache .dylib
0x90f6000 - 0x91b4ff3 ColorSyncDeprecated.dylib (400) <35E3054C-5DF1-30D4-A368-C4FDB0992373> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/Resources/ColorSyncDeprecated.dylib
0x94a1000 - 0x94a1fff com.apple.iLMBAppDefPlugin (2.7.1 - 327) <F64F0E0D-1124-30F2-8964-A930DC52448D> /Library/Application Support/iLifeMediaBrowser/*/iLMBAppDefPlugin
0x94a6000 - 0x94a7fff com.apple.iLMBFolderPlugin (2.7.1 - 327) <2B5245FC-4009-3AF0-9046-3CA2CC9382BE> /Library/Application Support/iLifeMediaBrowser/*/iLMBFolderPlugin
0x94ae000 - 0x94b5ff8 com.apple.iLMBAperturePlugin (2.7.1 - 327) <CF4434CB-6D74-3D2A-9763-A9E510C117CA> /Library/Application Support/iLifeMediaBrowser/*/iLMBAperturePlugin
0x94bc000 - 0x94bffff com.apple.iLMBGarageBandPlugin (2.7.1 - 327) <79CFDFDA-6C6C-3005-8B93-C0DDFEB091A6> /Library/Application Support/iLifeMediaBrowser/*/iLMBGarageBandPlugin
0x9523000 - 0x9672ff7 com.apple.iLMBAperture31Plugin (2.7.1 - 327) <E019FCC1-82E9-3B5C-8857-C400E2A0C542> /Library/Application Support/iLifeMediaBrowser/*/iLMBAperture31Plugin
0x96ba000 - 0x985effb com.apple.iLMBAperturePlugin2012 (2.7.1 - 327) <B478A96B-9977-38B0-90CF-6295DEAD35AC> /Library/Application Support/iLifeMediaBrowser/*/iLMBAperturePlugin2012
0x98de000 - 0x98e7ffd com.apple.iLMBFinalCutPlugin (2.7.1 - 327) <AADD0E89-19B5-3B28-97F8-7EB1D3415D42> /Library/Application Support/iLifeMediaBrowser/*/iLMBFinalCutPlugin
0x98ee000 - 0x98f9ffd com.apple.iLMBiMoviePlugin (2.7.1 - 327) <9D46F8D8-DF2B-3FC5-A370-7E9392D82181> /Library/Application Support/iLifeMediaBrowser/*/iLMBiMoviePlugin
0x9901000 - 0x9914fff com.apple.iLMBiPhoto8Plugin (2.7.1 - 327) <AF08A61A-B994-34C5-A266-E53382D3C3B5> /Library/Application Support/iLifeMediaBrowser/*/iLMBiPhoto8Plugin
0x991c000 - 0x9a6dfff com.apple.iLMBiPhoto9Plugin (2.7.1 - 327) <23389FAA-EF09-3E96-9E56-9599C7C777D5> /Library/Application Support/iLifeMediaBrowser/*/iLMBiPhoto9Plugin
0x9ab5000 - 0x9abdffb com.apple.iLMBiPhotoPlugin (2.7.1 - 327) <0BCB9184-2CF4-3E30-AB5B-BC54CA0A459D> /Library/Application Support/iLifeMediaBrowser/*/iLMBiPhotoPlugin
0x9ac4000 - 0x9c69ff3 com.apple.iLMBiPhotoPlugin2012 (2.7.1 - 327) <A10C2006-1338-3D88-A367-5AE4A0AB7BAB> /Library/Application Support/iLifeMediaBrowser/*/iLMBiPhotoPlugin2012
0x9cc4000 - 0x9cccffe com.apple.iLMBiTunesPlugin (2.7.1 - 327) <E7755FD8-BEAA-3A4C-973F-273432FBA0CD> /Library/Application Support/iLifeMediaBrowser/*/iLMBiTunesPlugin
0x9cd3000 - 0x9d8aff7 com.apple.iTunesAccess (10.6.3 - 10.6.3) <20F54184-69D0-468A-CEA5-1665192AF5BA> /System/Library/PrivateFrameworks/iTunesAccess.framework/iTunesAccess
0x9dba000 - 0x9dbbfff com.apple.iLMBMoviesFolderPlugin (2.7.1 - 327) <9EDCCFF3-FEA7-3F34-8711-A1078D1DE025> /Library/Application Support/iLifeMediaBrowser/*/iLMBMoviesFolderPlugin
0x9dc0000 - 0x9dc2ffb com.apple.iLMBPhotoBooth2Plugin (2.7.1 - 327) <98886D3A-BB21-3939-9DA2-0793D05B799A> /Library/Application Support/iLifeMediaBrowser/*/iLMBPhotoBooth2Plugin
0x9dc8000 - 0x9dc9ffd com.apple.iLMBPhotoBoothPlugin (2.7.1 - 327) <5C980E93-FB91-31E0-849F-F403A1B9A898> /Library/Application Support/iLifeMediaBrowser/*/iLMBPhotoBoothPlugin
0xa5af000 - 0xa5c1fd9 com.apple.FCP Uncompressed 422.component (1.5 - 1.5) /Library/QuickTime/FCP Uncompressed 422.component/Contents/MacOS/FCP Uncompressed 422
0xb28b000 - 0xb290fff com.apple.audio.AppleHDAHALPlugIn (2.3.0 - 2.3.0f2) <D971DBC9-B1D6-3F20-A6EA-B165C32A4E69> /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bun dle/Contents/MacOS/AppleHDAHALPlugIn
0xbf30000 - 0xbf30ff7 +cl_ -
For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.
Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
TS3899 My email only shows last weeks worth of mail! I want it to show all of my mail previous
My email only shows last weeks worth of mail! I want it to show all of my mail previous
There are a couple of things that could be deleting mail messages.
In Mac's Mail app click on the Mail > Preferences menu item. Now select your offending mail account from the Accounts list. Now click on Advanced. There is a setting to "remove copy from server after retrieving message." The Mail app will delete messages from your email service based on this setting. This will not delete messages from your computer.
If you are losing messages from your computer then click on Rules in Mail's Preferences, then check each "rule" to see if there is one that could be deleting messages. Click on the rule and then on Edit to see the rules criteria
Example of a rule that would delete messages:
If neither of these is your problem I suggest you check with Yahoo to see if there is a setting on their service that could be deleting messages.
Dan -
I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck! -
Problems with Logical Components
Hi All,
I am having problems with Logical Components with our project. We are implemeents SAP HCM and we have defined a logical component Z_ERP for the ECC server. now when you look at the transaction from SOLAR02 it seems they also have a logical Component SAP Learning Solution that is assigned to them. what could be the cause of this???Hi Trevor,
If you brought them in from the Business Process Repository, the logical component is going to be the default one. If you want to use your own, you need to replace the default one with yours.
You can do this in SOLAR_PROJECT_ADMIN by going to the System Landscape tab > Systems tab > highlight the SAP Learning Solution logical component row > press F4 > replace it with Z_ERP.
If for some reason SAP Learning Solution isn't listed as a logical component you may have to add it, you can also just go to SOLAR02 > Edit > Replace Log. Comp > Enter SAP Learning Solution in the top box and Z_ERP in the bottom one > click Save.
regards,
Jason -
Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?
Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian -
The screen shows problems with iCloud only choices are ignore or settings, however nothing I do will unlock it from this screen, cannot power off keeps that bubble on the screen. What do I do?
Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Problem with Logical Database DDF
Hey All,
I have a problem with Logical Database DDF.
In my program I am typing this
GET KNA1 based on selection screen. It is bringing back everything I want except BRAN1 whereby the field is ''. However in SE16 for KNA1 and for the same KUNNR, the field is populated with 'T180'
I am not understanding this?! I thought LDB where menat to make things easy!!I think it's not used by DDF.
so you must check it with:
check kna1-bran1 in s_bran1.
A. -
Problem with logic:equal tag when used with bean:write
Hi All,
I have a problem with logic:equal.When i tried to use the following piece of code its not working
<logic:equal name="var in session" value="<bean:write name='var in request'/>">
Do some thing
</logic:equal>
its not working i know we cant use nested tags
is thr any alternative instead of using a scripletA scriptlet expression is about all you can do.
<bean:define id="tempVar" name="var in request"/>
<logic:equal name="var in session" value="<%= tempVar %>">
...If you have a JSP2.0 container with EL enabled, then you could use an EL expression instead of the standard <%= expr %> -
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
According to Verizon, my family is somehow using 15 to 16 GB of data per month on our unlimited data plan, sometimes more. This is a jump from 4 to 6 GB in the spring of 2012. We have done nothing to justify such a huge surge in data usage per month, but I don't seem to be able to get any satisfactory answer from Verizon as to what's going on. Our time spent on the Internet is no different than it's ever been. Last month, customer service tried to suggest that a virus we had had on one of our computers must have caused the computer to suck up data without our knowledge, but the virus is gone and our data usage just keeps getting worse. To make matters even more painful, such high "usage" causes Verizon to slow our UNLIMITED data service to such a snail's pace that we can't get anything substantial done online. And, for some reason, we now constantly lose our signal. We are connected via USB, which is a poor way to connect, granted. But it worked fine in the spring of this year. In fact, it was faster than anything we had had previously. Go figure? I tried to download Java last week, and the computer indicated it would take 15hrs to download. What a waste!
Apparently, my only option is to switch to MiFi (we are in a rural location lacking DSL) for my household. And this will cost me at least $60 more per month. Why, pray tell, would I want to pay more money to solve a problem that Verizon cannot satisfactorily explain to me if there are no guarantees MiFi will work any better? I cannot get my money back if it fails to improve our situation. And what about the supposed data usage? Am I supposed to believe that my kids' Facebook time combined with our internet surfing eats up 3 to 4 times as much data as it did only a few months ago? I don't think so. Something is not adding up here. Oh...I do have one other option. Home Fusion broadband added to our account for even more money per month.
Bottom line? Spend more money that I don't have for unreliable service, with what I believe to be bogus data usage charges. I think I just need to cancel Internet service, paying the fee for breaking my contract of course, and take my business elsewhere.
Anyone else having these sorts of problems? What have you done about it?Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg -
Operating system Windows 7. A few days ago no problems with audio, clear sound when listening to e-mail audio attachments and Amazon music samplers. During last 2/3 days both attachments and samplers fail to work, but when playing music from library held in Windows Media Player no problems. This would appear to show no problem with speakers etc and I have not knowingly amended any audio controls.
Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)
Maybe you are looking for
-
Not able to convert element of type xs:date to dateTime in XSLT 2.0
Hi, I am trying to subtract 2 dates and get the month difference between the two using XSLT 2.0 This is what I have done <xsl:variable name="monthDiff"> <xsl:call-template name="monthDifference"> <xsl:with-param name="date1" select="/tns:StartDate"/>
-
Very slow transfer to Time Capsule (Ethernet)
I am trying to transfer 80 gb to my Time Capsule (Ethernet) but transfer is very slow (100 kb/s). How can I fix it?
-
Hi! I just received some videos for my wedding on a hard disk that are .mov codec: HDV 1080i50, Integer(little Endian), Timecode. They do not open with iMovie. So I guessed the format was wrong and tried it with Quicktime, however I only have sound w
-
Need help with "class file contains wrong class"
I have a dbUtil package as package dbUtil; public class dbConfig { public String getHost(String db) { This file called dbConfig.java has been compiled with -d option and rthe class files resides in dir <install_dir>/webapps/test/WEB-INF/classes/eb/db
-
DVCPRO HD Frame Rate Conversion add noise
We have shot some footage (DVCPRO HD 720p 59:94) converted just fine for SloMo. Though noticed it adds more noise. The noise flickers and rotates. Anybody else have this problem. We think it might be a problem in post(in conversion) In production we