Constant Red Broadband Light

I have a problem with my broadband.
On the 15th October I rang BT and requested my connection to be
transferred to my new property on the 28th October. I then received an
email stating that connection would be made on the 5th November.
I then rang BT again stating that this date was incorrect and the
changeover date should be the 28th October and immediately received an
email confirming this new date.
On the 28th I moved into the new property and the broadband was
working fine. The 5th of November arrived and the broadband stopped
working (going from a blue power light, a blue broadband light and a
blue wireless light to blue power, red broadband & blue wireless).
Since the 5th I have had 3 engineers come to my property, all of
which have found no faults at the property (including the router) and
almost daily calls from India but I still have no connection.
I would appreciate your help immensely! Any thoughts?
Solved!
Go to Solution.

Hi TerryTeo,
Thanks for the post and welcome to the forum.
A red broadband light usually indicates a problem with authentication. Can I get you to check what details you are using within the hub manager?
Open a web-browser and type http://api.home or http://192.168.1.254 in the address bar and then click Go, or press Enter.
Click Settings
Enter Hub password and click OK
Click Advanced Settings
Click Broadband
Click Internet
Under the 'broadband username' section make sure that the username you are using is [email protected]
Please check this and then get back to us to let us know where we stand with this.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Similar Messages

Connectivity issue (Red broadband light)

So everything was fine then all of a sudden the internet goes down, I've checked the log & it says he hub cannot connect to the server, the light is just red. I'm in south east london (se11) not sure if anyone else is experiencing this, I have to use my phone as a modem just to post this message. heres what the hub's log says:
<textarea rows="5" cols="20">
Jan 1 00:17:37 2003 ( 1100.820000)
HTTP server returned error 404
Jan 1 00:16:56 2003 ( 1083.010000)
Admin login successful by 192.168.1.74 on HTTP
Jan 1 00:16:41 2003 ( 1067.490000)
HTTP server returned error 404
Jan 1 00:15:23 2003 INF 2003-01-01T00:16:08Z cwmp: mt_cwmp: session not established, will retry in 27000 seconds Jan 1 00:15:23 2003 INF 2003-01-01T00:16:08Z cwmp: cwmp_session: session completed successfully
Jan 1 00:15:23 2003 INF 2003-01-01T00:16:08Z cwmp: cwmp_session: got envelope, len=-1
Jan 1 00:15:23 2003 INF 2003-01-01T00:16:08Z cwmp: cwmp_session: sending envelope to ACS
Jan 1 00:15:23 2003 INF 2003-01-01T00:16:08Z cwmp: session started event code(s): '0 BOOTSTRAP' Jan 1 00:07:20 2003 ( 506.810000) HTTP server returned error 404
Jan 1 00:03:23 2003 ( 269.410000) HTTP server returned error 400
Jan 1 00:03:23 2003 ( 269.400000) HTTP server returned error 400
Dec 31 23:59:55 2002 ( 61.730000) HTTP server returned error 404
Dec 31 23:59:53 2002 ERR 2003-01-01T00:00:38Z cwmp: mt_cwmp: session error: Could not resolve host
Dec 31 23:59:23 2002 ( 29.710000) DVA started
Dec 31 23:59:22 2002 ( 28.390000) sys_if_stats_reset failed for atm0
</textarea>

are there any problems shown here http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

BT Broadband - Red Flashing Light on Home Hub and ...

(Posting on behalf of a friend).
Good morning,
Having recently got a the latest home hub (recieved as part of upgrade to broadband package) I currently do not have a working broadband connection. Have been unable to get BT on the phone so posting here (hopefully for a resolution).
The Homehub 5 goes through its start up procedure then goe straight to a flashing red light. It has been installed just over a month and was working at the start of this time.
We have tried leaving it to cool down, removing the phones so only the broadband is plugged in and even resetiing it through the procedure identified in the help documentation. Each time, the same result.... flashing red light!
According to the BT website, the flashing red broadband light means probelm with the broadband line. Is there anything we can do on our end or should we try BT again?
Thanks in advance,
K.

are there any problems in your area http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
http://community.plus.net/exchange-information/
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Broadband light flashing red

On my Gateway all lights are green except for Broadband 2 which is flashing red. We have restarted the gateway multiple times and checked the wires. Please let me know what else I can do. Thanks!

Call 1-800-288-2020 to schedule a service call for your flashing red broadband2 light. This is a (4) hour appointment window available 7 days a week with morning 8:30-12:30, afternoons 1-4, and evenings 4-8 depending on opening slots. Someone 18 or older needs to be at residence during this time frame, once tech arrives unknown how much time will be needed to resolve.

DMA2100 Constant Red Light

I had some friends over and they were pressing buttons around to watch TV. Well, the DMA2100 got hung in the process and I had to pull the power on the unit and put it back. This didn't show a display and just a constant red light so I hit the reset and also held in the reset button but still no display.
I also have tried to hold the reset button in for 10 seconds, while holding the reset button unplug the unit for 10 seconds, then plug the power back in while holding it for 10 seconds. I then let go and no display again. Do I have to return/replace this unit?

I also have the constant red light. My unit was made in January 2008, thankfully, I bought it on Amazon and I therefore still have the invoice so it can be covered under warranty.
Unpowered it for minutes, pressing reset button for 30 seconds, etc, etc - it simply no longer turns on.
This is the first time I noticed this behavior. Normally, if the picture froze up (which would appear to happen if the underlying tv signal for a particular station was weak or flaky), you could simply unplug the device at the back of the unit, then plug it in again and everything would be fine.
Well, I noticed a day ago the red light was on (which to me meant I actually shut down the unit the night before), so I hit the power button - and nothing. The remote led was lighting up, put the remote right next to the unit - nothing. Try batteries from a different remote - nothing. Tried a secondary Media Center remote I had that worked with the unit - still nothing.
So Linksys support is having me unplug the unit for 24 hours (no power connection), and I guess we'll see if that resolves it. I can't imagine there's any capacitor in this device which would hold a charge that long - but I'll play their game anyway.
I'll let you know what happens...

Self install Uverse Internet red blinking broadband light

I've been trying to setup my new Uverse internet service since my activation date (7/21 after 2pm) and the broadband light will not go solid green. I've tried all of the troubleshooting steps I could find and still nothing.

Hi ,
I am sorry about the issues you are having installing your service, but I will be glad to help. Try testing on the other phone jacks in your house. It can take a few minutes for it to sync up, but it should take less than 1 minute for it to start blinking green. I will also send you a private message to look into this issue further.
-ATTU-verseCare

MS-7345 (P35 platinum) will not boot (red standby light)

I shut down today and went to boot back up again and nothing happened. I opened up the case to find that the red standby light on my motherboard was on but nothing was happening when I tried to start it up. I have tried to use my reset switch instead of my power switch to see if it was that but that does nothing too. There are no beeps or anything like that. I have even removed my graphics card and memory to see if that will help but there is no luck. I have checked the cpu and no damage appears to be there also the same with memory and other components as well as everything on the motherboard. What is happening?
ERP 080
MS7345 Version 1.2
CPU: Intel Core 2 Duo E6600
Memory: PC26400 OCZ2P800R22GK
PSU: BFG 1kW
ATI Radeon HD3870
WD RaptorX

Power supply might have gone so try another one that is powerful for your system.
I take it not even the fans come on when you press the power button?

Home hub 3 broadband light flashing orange & purpl...

Hi,
Broadband has stopped working with a flashing orange & purple broadband light (7 days and counting)
Have phoned bt but they failed to resolve the issue over phone - resetting, power off/on etc. Tried 4 different branded adsl filters, alternative router but still no connection. Only 1 main socket, no extensions connected, doesn't have a test facility(older style socket). Tried 17070 quiet line test - sounds clear. Phone line test reports zero faults.
Details from home hub 3 Broadband > connection tab
Line state: Connected
Data Transmitted/Received (GB): 0.0 / 0.0
Downstream: 7.938 Mbps
Upstream: 448 Kbps
ADSL Settings VPI/VCI: 0/38
Type: PPPoA Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 16.7 dB / 26.0 dB
Line attenuation (Down/Up): 10.8 dB / 5.0 dB
Output power (Down/Up): 17.9 dBm / 12.4 dBm
FEC Events (Down/Up): 10905 / 0
CRC Events (Down/Up): 11 / 0
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 31 / 0
Error Seconds (Local/Remote): 121 / 3
Broadband > Internet tab
Connection time: Connecting
I suspect the issue is at the exchange, has bt disconnected me and plugged someone else in? Any thoughts welcome.

you appear to have tried everything suggested by BT for purple/orange flashing constantly and not solved the problem. the help pages then say if that has failed then contact technical support but I would contact the forum mods instead for help
contact mods
can take up to 3 working days for mods to contact you
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HELP Needed ASAP! Curve Not Turning On, Red Flashing Lights!

Hi,
I have a Blackberry curve 8310. I plugged my curve into my mac to do a software update. Midway through, my phone shut off and hasn't worked since. The battery is fully charged. The phone is off and won't turn on. Additionally, there is a red LED light blinking twice every few seconds. I think I found an article on blackberry.com's knowledge database that diagnosed my issue, but my problem now is that because the curve isn't turning on/off, it's not connecting to my mac's desktop manager. So I can't do anything the article tells me to do. What should I do now? I need help ASAP!
Here's the link to the article: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB19915
Thanks in advanced!

Hello Asmro and welcome to the BlackBerry Support Community Forums.
It can take up to 30 minutes for the Mac to connect to the BlackBerry.
I would remove your battery and connect to the BlackBerry Desktop Manager. Once it comes up there is no software installed, re-insert the battery and follow the article KB19915.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Red blinking light as well as trailing broken black line going in a square on left side

red blinking light as well as trailing black broken black line going on left side that goes in a square trail

Did you ever fix this? My daughters is the same. Treated with tender loving care, we reset to factory and it disappeared but was back again after 2 or 3 days. Still in warranty so going to take to the genius bar, however a bit concerned that because it belongs to an 11 year old they are going to assume she's damaged it.

Red Flashing Light on ImageCLASS8280Cw

I've just unpacked my MF8280Cw, pulled the strips from the cartridges, and added paper to the paper drawer. The red error light continues to flash - all this prior to attempting to connect the printer to a PC.
There doesn't appear to be a paper jam. I've removed the tray, re-inserted it and rebooted the printer several times.
I then plugged the printer to the laptop via USB cable but the Windows8 PC didn't recognize a printer.
Are there any other things to check for, or did I get a dud?
Thanks for your time.
Patrick

I took another attempt at getting the printer to work today. I powered it up, and stepped through the setup menu. After completing the menu options I now receive the following error message:
"Remove tabs/pieces of tape from the toner cartridge. Black(K)
I had, of course already removed the tape by pulling out the orange ring. Any thoughts?
Patrick

No broadband light on hub, nearly 3 weeks...

I have arrived at this forum as it seems to be the only place BT problems are resolved and I'm at the end of my patience. My broadband activation date was 16th April 2013 and as yet the broadband light has remained off. I've wasted time and money trying to get through to the correct department, been cut off without explanation and been promised call-backs that haven't happened. After finally getting through all the technical checks the latest prognosis is that there is a local area connection fault and the earliest an engineer can come and look at it is 17th May. A full month later.
I find all this a bit bewildering since BT broadband on the very same phone line was working perfectly only about a month ago (I have taken over the phone line from a previous tenant).
I have easily spent £50 on phone top-ups and dongle bills trying to get this sorted and to top everything off, BT has had the cheek to bill me for my first month of non-existent service.
Any help from anyone would be very welcome.
Karen

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Red Traffic light in ME55

Why is there a red traffic light in ME55?
Different purchasing group and have deleted items?
There is one PR in my system that only has only one purchasing group and do not have deleted items, and it can't be released via ME55. Understand that it can be released via ME54.
However, anyone can share why is this happening?

Hello:
I have the same problem. SAP version 6.0
I have just implemented the overall release for purchase requisitions.
If the purchase requisition has a deleted line item, when I try to release it via ME55, a red light that say Release via individual release.
Do you know how I can fix it?
For PO, I have implemented the overall release and I never had any problems.
Thanks in advanced

Yellow broadband light then no internet

Hi there. Can someone please help me. For the last couple of weeks the yellow broadband light will come on on my home hub, then on my laptop it will disconnect me off the internet with the computer screen saying the yellow light is on unable to connect. It seems to happen the same time on the evening whenever we are on the computer and if this doesnt happen it seems that the internet will run slow for a short period of time then the speeds will return to normal.
When the yellow light sign comes up on our computer screen we have to close the page then open the internet again and then it seems to be working again.
I read somewhere about the 10 training period what is this? When did it start? How long does it go on for? and come this be what the problem is?
I am on the old home hub been with bt broadband a year and a half, it comes off the asdl. I am not able to have bt infinity yet. Can somebody please help its driving us crazy. I reset everything, checked connections and its still the same.

10 training period starts from when you are activated with BT and runs for 10 days, If you could post your hubs stats and BT speed test results, we might be able to offer help. However if you are in this 10 days, its very unlikely BT will want to know until this period has passed!
To
post the full stats from your router
For homehub - 192.168.1.254
Navigate to ADSL Settings or use the A-Z at the top right
Click on More Details and then post the results.
Run Bt speed tester and post the results from http://speedtester.bt.com/
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Black screen red flashing light

Plz help.
Today my touch screen on my bb torch 9800 wouldnt work, I did a battery pull and now my phone wont switch back on. the screen is black and there is a red flashing light.
I have had my bb neary 18 months and never had a prob before.
Can you advise what i should do next,

Hi and Welcome to the Community!
Put your BB onto a known-good wall charger for 2 hours, and do not touch it. Then, with it still on that charger, remove the battery, leaving it out for 5 minutes (with the BB still on that charger!). Put the battery back in. If it boots up, leave it alone (still on the charger) for 5 hours to see if it will fully charge and function again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Constant Red Broadband Light

Similar Messages

Maybe you are looking for