Constant resource is out of sync opening files

Every time I open a file off a network drive, I get a resource is out of sync, press F5 message
this error message is also not selectable which makes searching for a solution harder

That's probably Eclipse, not CFB really. There is a "Refresh
automatically" option in Preferences\Workspace that may help.

Similar Messages

Issues with finder going out of sync with file images in cover flow.

Hi All,
I'm having issues with files going out of sync with images in cover flow since updating to Mavericks. Typically, if I had for example 10 pictures listed as 1 to 10, if i deleted images 6&7 the images remain in coverflow but the file listings are removed, then if i click on image 7 the file listing of image 8 is highlighted, then to make matters worse, if i click on the file listing for image 9 in shows image 8 in cover flow. To stop this I have to shut down finder and restart it, then the whole thing repeats itself if i delete more images. Its a nightmare when your working with 50 plus images at a time!!! Help!!
Thanks all.

com.apple.systemuiserver.plist and com.apple.finder.plist
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/. Move the .plists to your desktop.
Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Out of sync audio file with video

I have a audio clip that was recorded seperatly from video. I add the audio track which is voice to the video that I have of a person giving speach. I line them up where speach begins and is in sync but say 10 mins into it the clips are out of sync! They should both be in the same time but they are not, how do I fix this?

Once you've determined answers to David's queries,
you will have a better idea of ways to fix
this...i.e. if the audio rates are not aiff and
exactly 48.0Khz/16bit, you could export the audio
into a new file with those parameters and replace
current audio with this file.
Actually, I tried that last night as well after reading this forum. I sent the good audio (aif) to SoundTrack Pro and resampled the file at 48khz to match the sequence settings. Unforunately, this still did not fix the problem.
I also looked at changing the base timing rate from 29.97fps to 30, but I coudn't see a way to change this. I tried changing it from the Advanced settings from the Sequence Settings Dialog, and I can change to 30, but it then gives an error message that it cannot do that.
The idea of a speed change is one I hadn't thought of, but I am doubtful of the results. I seem to be either stuck with bad audio or arduously cutting up the audio every 5 minutes to get it back in sync at those intervals.... I wish I understood why this is happening. It doens't make sense to me.
I still think it has to do with drop frame/non-drop frame, since I was told the whole point of 29.97fps was t solve an audio sync problem. When the audio isn't coming from a video source recorded or captured at 29.97fps then we are going to have sync problems. The question is, now to get it back into sync with these external audio source files, without a lot of headache.

Finding out that an open file has changed

Hi. I'm working on a java app to monitor a log file. Unfortunately, when the log file rotation occurs (by moving the file to "log.1" and creating a new "log") I can't figure out how to determine that from my app; the code just goes it's merry way. When the file is renamed, the open file in the java app continues to have access to the original file (under the new name) and if I add lines to the "log.1" file, the java app continues to read them.
This is on JDK 1.4.0 for Linux, and I'm using a RandomAccessFile object.
Any ideas? Other than (wastefully) opening a new File everytime through the monitor loop I can't think of a clean solution.
mike ([email protected])

use getLastModified date

Power went out, can't open file I was working on earlier.

I use photoshop CS5 on windows 7.
Been working on a file with a few layers, then the power goes out so my computer "crashes". When I reboot my computer, I am unable to open the file I was working on earlier and instead, get the message "Could not complete your request because it is not a valid Photoshop document." The file is still .psd and I don't have a preview for the file anymore:
Is there anyway to recover the file?

Saving's not really a problem for me, since I ctrl+s every 5-10 mins or when I make a really important change.
I guess I have a similiar problem with this person:
http://answers.yahoo.com/question/index?qid=20120330152335AAhEzVH
but its really hard for me to believe the file's gone for good since I've been working on it for the past week...
I guess I'll consider upgrading :\

Out of sync exports

Hi,
we have this recurrent but intermitent problem:
When exporting (sharing) in Master File mode, Apple ProRes 422 with Roles as Multitrack (8 mono tracks), some of our projects are out of sync by a frame.
This we can see with a one frame 1khz beep set at 9:59:57:00 in the leader we use. On the export the beep ends up one frame early and the the whole export is out by a frame.
Most of our material is mxf wrapped xdcam hd or sd edited directly in fcpx using Hamburg Pro Media mxf plugin.
But the out of sync exports happen with other material too.
The problem is not constant as sometimes, after a few attemps we get a correct file.
We've tried rebooting fcpx, rebooting the whole machine, ditching render files, none of this guarantees us a perfect result.
Our leader is made of a Generator created in Motion for the slate, followed by a clip of Bars and Tone followed by more of the same generator followed by a self contained countdown built in Motion.
As Generators in Motion are sometimes buggy we suspected this as the source of the problem but we've had the same out of sync experience without using the leader...
help would be welcome as we can not accept a one frame out of sync master file and we need to have absolute trust in the exports we produce.
thanks

Did you talk with AJA before upgrading? What do they say are the most current supported versions of OSX, FCP & QT?
x

I need to open files in a folder within a photoshop action

I am writing an action (to be triggered by automator) to take three photos from a tethered camera and open, size, and crop them, and place them in specific locations on a template image to create two photo-booth strips side by side on a 4x6 print. It works perfectly, but when I write the "open" command into the action, it referenced the files by name. I need to find a way to have my action open the three files in a folder (the only three that will be there thanks to my automator action), but not reference them by name. Is there any way of opening images in an action without referencing them by name? Maybe some sort of open images in a folder type of thing? Any ideas are very much appreciated.
---Dan

I have played with the >>Toggle dialogue on/off<< field and manually opened the files from their folder, but the action has the file's location written into it. I need it to open all files in a folder. As part of my Automator action, I am moving my photos (taken in batches of 3) into a workflow system of folders so the photos from the camera save to a "from camera" folder, and then move to a "for photoshop" folder, and those are the images that open into the ps action and get put into the template. The action saves the composite image to an archive folder, and deletes the image layers, and then the Automator action moves the originals to another archive folder. There shouldn't be issues as long as the actions keep running and I can figure out how to open files form a folder without referencing the specific images in the folder. Also please keep in mind that I am writing this as an action witihn Photoshop CS3, so basically clicking record, and letting the computer write the "code". Did that help?

Quicktime audio out of sync, no in VLC

I have a problem for some avi files. When I play then with quicktime, the audio is out of sync with the video. The same files work fine with VLC. I use Perian for the codecs....

Hey guys... I wanted to update you on something that worked for me as far as my problem with a few of my avi files being out of sync. I ended up trying a program I already had, which is free by the way. It's called ffmpegx for Mac. I took one of my out of sync avi files and loaded it into ffmpegx and then used the AVI DivX setting to re-encode it. To my surprise it actually worked and played fine in QuickTime in perfect sync. I tried it on another one of my out of sync avi files and it fixed that one too. I then converted the file again in Handbrake with the AppleTV setting to be able to watch it on my tv.
Give ffmpegx a try... it couldn't hurt

Finder/Cover Flow is out of sync by one file?

Hi all, I've had this problem for a while and it's really frustrating.In Finder using the 'Cover Flow' option, my files are out of sync by one file. By 'out of sync', I mean the the bottom half of the screen is showing one file but the top half of the screen is 'previewing' the wrong file by one. It's only off by one file, but this is really annoying.
When I use the view options 'Icons', 'list' or 'columns' I don't have this problem.What can I do?
Thanks for any help!

com.apple.systemuiserver.plist and com.apple.finder.plist
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/. Move the .plists to your desktop.
Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.
If you look at the 'More Like This' box (top right) it seems the Cover Flow view is having problems.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

MPEG-2 file has out of sync audio - PLEASE HELP

We captured four mini-DV tapes into Final Cut Pro HD using my Canon mini DV camera and a firewire. After capture we put each tape on its own timeline, added chapter markers, and then compressed each one into MPEG-2 files using the QT codec. Once we had the compressed files we deleted the origional footage and burned DVDs with the MPEG-2s.
After viewing the DVDs we realized that the audio was out of sync on each of them. It seems to get pregressively worse as the tape plays (the beginning is close to being in sync and at the end it's a few seconds off). Each tape is about 59 minutes long.
We really need to fix this and do not have access to the orional/captured footage. Does anyone have any ideas?

You deleted the original footage before you verified anything !
Sorry, this is just <princess bride voice> inconceivable <pbv off>
Use MPEG Streamclip or DVDxDV to extract a DV NTSC file from the VOB files.
Drop that in the time line.
export the audio as an AIFF file
Open the file in Peak or similar application that change the length of the audio file without changing the pitch.
reimport the file to FCP
Re export the file as a m2v and burn a new disk.
Swear on whatever is holy that you will NEVER delete source footage again if you do not have access to original tapes/media.
x
ps. Do not double post - we will get to you.

Audio goes out of sync when i open project on diff macs

i have an iMovie project created on an iMac saved to an external.
I go to open the project up on my macbook and the audio is out of sync.
I go back to my iMac with the same project and it works just fine.
I'm a bit confused because both macs use Mac OS X 10.6.4 and iMovie 8.0.6
what other differences might there be?
any input is appreciated as I'd love to work on projects while out in the field!

Try exporting the iMovie project as a single full quality dv format quicktime file.
I use iMovie6 HD and this is my usual procedure that works well.
Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
iDVD seems to work better with iMovie source that has fewer clips.
BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
Hope this helps.

Large .dv file plays fine in Quicktime, but audio out of sync in iMovie??

hi,
i'm trying to convert some old analog 8mm tapes to digital. to do this, i'm using a sony trv320 camcorder with firewire feeding iMovie '08. i've imported an entire 2 hour tape into iMovie, and everything is fine except that at some point, the audio gets out of sync from the picture. i've opened the huge 24 GB .dv file in Quicktime, and everything is in sync, so I assume this is some kind of problem related to iMovie. i've done lots of searching on this and have made sure that the camcorder is sending 16 bit audio out. i also tried using mpeg streamclip to split the huge .dv file into smaller parts, but this resulted in the same audio sync problem (which is weird).
is my only option to manually import my tapes 10 minutes at a time? please say no
the most puzzling thing about this is that the huge .dv file is perfectly in sync all the way through when playing back in Quicktime.
i'm at a loss!! hope someone can help.

I've edited in FCP and exported with compressor with all the appropriate settings, to mpeg 2.
Double check to make sure that you edited in Anamorphic and also encoded as 16:9 video not 4:3 - also make sure you set the Track to 16:9 Letterbox in DVD SP.
What encoding rates did you use for the video and audio? Sometimes if the rates are too high it can cause drifts.
On the audio side, did you export the FCP as self contained and make the audio AC3? Also you can try just exporting the audio as an AIF and encode that as an AC3.
How did you burn the DVD (Speed and Media used?) Sometimes bad burns/media can cause issues.
Also look at these threads
http://discussions.apple.com/thread.jspa?messageID=3131142&#3131142
http://discussions.apple.com/thread.jspa?messageID=1872235&#1872235
http://discussions.apple.com/thread.jspa?messageID=1363574&#1363574
http://discussions.apple.com/thread.jspa?messageID=1086775&#1086775

Audio out of sync on source file

So I've captured 4 tapes from an event. The 1st two tapes captured produced a quicktime file with the audio out of sync. The last two tapes are fine. The sample rates match both the capture settings and sequence settings and "make new clip on timecode break" is turned on. "Abort capture on dropped frame" was left off.
I set up a new scratch disk after already capturing all the footage. I moved everything (render files, capture scratch, audio render, etc.) from one folder to another. I had suspected this being the problem until realizing the problem was not only on the timeline, but also on the source files opening in quicktime player.
I've done searches and everything, but cant seem to find anything helpful. Could dropped frames be doing this?
~ Jim

First, scroll to the right in your browser and make sure the audio 'format' is 48.0kHz...just to check.
What is your media source...DV, HDV, DVCPro...etc?
Is the sync issue a consistent amount, or does it fall further out of sync over time?
If there were timecode breaks or any other reason that caused the capture to 'drop frames', then chances are your setting for 'make new clip on timecode break' is the culprit. FCP will continue to capture beyond the break, but with improper TC.
If the sync just goes further out of sync over time, then it could be the audio was captured at 47.998 or 48.002. This can usually be fixed by 'Exporting as aiff - 48khz/16bit.
Drifting out of sync can be an issue with long captures as well. Might consider breaking captures down to 20 minute chunks.
Post back with info/answers.
K

Eclipse XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.

I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine,
but happens now that i need to have a xsd and wsdl with business names and not table names, invented to create a xsd and wsdl file in jdeveloper
and then went to eclipse and tried t xquery tranformation, but when i add the replace in the message flow in the filed in Variable : body and Expression i look for the xquery and in the binding trying to put
$body/input parameter, get the following error [RouteNode1, Replace action] XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.
what im doing wrong or its configuration
thanks in advance sonia

thanks
ok have created a table with only in column varchar2(1)
then the type object and the procedure to insert it works the proxy in the osb if i test it inserts
now in jdeveloper i created an xml file with
<?xml version="1.0" encoding="windows-1252" ?>
<vessel>
<barco>a</barco>
</vessel>
then i created a xsd based on this xml, and a wsdl based on the xsd
in eclipse created a xquery transformation and selected source as the xsd created in adf and target the xsd input parameter, dont know why in the purple ball of the input parameter it puts a ?, an a f.
then in the proxy xpath not writing anything in variable body and in the expression select the xquery and in binding select the parameter

Text file generator gets out of sync!

Has anyone any experience of this behaviour in the text file generator in Motion......
Basically the first entry in the list is only displayed for half the time of the other entries!
This means that any repeat keyframes that I apply (even if I apply from the second entry in) get out of sync with the text display.
There must be a workaround for this or maybe I am missing something and this is desired behaviour.
Can anyone help?

When you mentioned keyframes, I thought we were on the same page as to where to go next. In the off chance I was mistaken, I'll go over the steps from the beginning.
When you use the File generator, Motion automatically evenly divides the time of the length of the generator by the number of lines of text and plays them accordingly. When you look in the Text Generator Inspector, the Speed is set for Constant... Motion figures out how many lines of text and inserts *fixed* keyframes. What you really want to do is set the Speed to Custom:
Immediately afterwards, you want to Reset the Custom Speed keyframes (Motion defaults from 0% - 100% over the length of the generator.) Clearing the default keyframes will keep you from having problems later.
Once you have the keyrames for the Custom Speed parameter cleared, you can move the playhead to the start of where you want the first line of text to appear and set an In Point for the generator. You will also want to mark the first keyframe so click on the yellow diamond to set it at 0%.
Next, play the project and at the point you want the *next* line to appear, move the Custom Speed slider enough until the next line *just appears* (the keyframe will automatically be set.) If you need more precision, you can widen the inspector column by clicking on the dividing line and dragging it right.
Continue doing the same until your finished setting the Custom Speed keyframes.
Then, right click on Custom Speed and Show In Keyframe Editor
Below shows the keyframes are linear. They need to be Constant. So, click on any keyframe in the Editor and Command-A to select all. Then right-click on any keyframe, and from the popup menu, select Interpolation > Constant.
This is what you're going for -- Custom Speed values that are flat until they change -- Each line will appear at precisely the point of the keyframe.
HTH

Constant resource is out of sync opening files

Similar Messages

Maybe you are looking for