Constantly being asked to set time and date (Apple TV 2nd Gen)

I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
Thanks!!

what if you try something simple as to restart your phone and check again. 
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • How long should setting time and dates take?

    I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
    How long should it take?

    You have a network problme.  ATV is not able to connect to the internet, so it is not able to set it's date and time.

  • Set time and date not working

    Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

    You need to set your location to where you are, not where you might like to be.

  • Why my atv can't set time and date after restoring it using itunes ?

    when my atv restarting after  I restored it using iTunes, it can't set the time and date.
    the atv is connected to the net by wi - fi.
    when I try to sign in using my apple id, I get a massage that the password is incorrect.
    I have apple tv with ios 7.

    The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

  • Setting time and date on Apple tv

    After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
    manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
    no luck

    Setting date and time

  • Can not set time and date fax setting on officejet 4620

    Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

    The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
    2. Scroll to Tools.
    3. Scroll to Time and date.

  • Apple stays on setting time and date after restore

    apple tv stays on loading setting time and date

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.

  • HT202157 How can I set time and date in the Apple TV???  This step doesn't let me go on with installing itunes!

    The area is set for San Juan, PR, but it doesn't recognize the date and time.

    This indicates a network issue.  Ensure DNS settings are set to Automatic and the regional settings are correct.

  • HT3180 stuck on setting time and date

    the screen is stuck oni setting date and time

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Apple Tv (3rd. Gen) connect to network but didn't set time and date so...

    Hi.
    Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
    We were on vacation so, I disconnect some devices in my house, including the Apple tv.
    I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
    After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
    The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
    So, what happens?
    It is general, or is this a single case?
    If somebody know about a similar case, and have the solution, I'll appreciate the advise.
    Thanks.
    Giovanni Pizuorno C.

    Hi.
    Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
    We were on vacation so, I disconnect some devices in my house, including the Apple tv.
    I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
    After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
    The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
    So, what happens?
    It is general, or is this a single case?
    If somebody know about a similar case, and have the solution, I'll appreciate the advise.
    Thanks.
    Giovanni Pizuorno C.

  • Constantly being asked to set default home app

    I had downloaded a third party launcher and selected Always as the default, but every time I exit an app, it constantly posters me to select the default home app. I've tried deleting the cache and force quitting Xperia Home, but that didn't solve the problem. I then deleted the third party launcher, but am still getting asked to choose the default between Xperia Home and Xperia Simple Home. Even when I select Always for the Xperia Home launcher, I still get asked each and every time I exit an app.
    Solved!
    Go to Solution.

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • Goods delivered but not reached to customer (in transit)

    Hi All, I have a scenario that, we have done the delivery, Invoice, Excise Invoice and the goods have moved to customeru2019s place (in transit) but they have not reached to customer, and due to some reason goods have come back to the Factory. And th

  • Can't set Data settings in 3.1.2

    Hi there, I have just upgraded my iPhone 3G to 3.1.2 and can no longer set Data settings - is there a reason I can no longer enter these, and is there another way to do it? Thanks Nathan

  • Embedding an image in email doc

    How do I embed an image in an email document?  I am using MacMail and an IMac.  I can attach a flyer as an attachment.  I need the flyer to show up when readers open the email.  I don't want them to have to take the extra step of opening the attachme

  • Wl6 Admin - Cluster - Cluster Address - What does this tab represent?

    In the WL6.0Sp1 Admin Console, at cluster creation time, a Cluster address           is required. What does this cluster address represent?           Heres what WL6 documentation says           (http://edocs.beasys.com/wls/docs60/ConsoleHelp/cluster.

  • Interactive Content

    In some examples on the web of CS4's new export to swf feature, I saw not only page transitions but actual elements on each page moving into place as the page was turned. I have not been able to find any information about how to do this (or even find