Constantly "Cluster resource 'Virtual Machine' in clustered service or application 'SERVER' failed

Hi...
I have an IBM BladeCenter S with 3 blades and an IBM System Storage DS3300 (ISCSI).
In each blade is running Windows Server 2008 R2 with
HYPER-V,
Failover Clustering with Cluster Shared Volumes.
I have observed that many errors occur constantly in "Failover Cluster Manager" and some VM´s are relocated to another blade automatically, however thoses VM´s sometimes no longer responds to network activity.
The errors I have observed in the "Failover Cluster Manager" are:
Source: Microsoft-Windows-FailoverClusting
Event ID: 1069
Description:
Cluster resource 'Virtual Machine' in clustered service or application 'SERVER' failed.
Source: Microsoft-Windows-FailoverClusting
Event ID: 1205
Description:
The Cluster service failed to bring clustered service or application 'SV-DBURAS' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
Another error (warning type) that is constantly generated in the SYSTEM events (Mirage is the storage name):
Source:        ds4dsm
Event ID:      769
Description:
IO error being retried via alternate controller Mirage:1
Source:        ds4dsm
Event ID:      10
Description:
Mirage:0 Failover command issued.
Source:        ds4dsm
Event ID:      801
Description:
Failover succeeded to Mirage:0.
Thank you in advance any help!

Hi,
I suggest referring to the following articles:
http://technet.microsoft.com/en-us/library/cc756225(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc773525(WS.10).aspx
Tim Quan - MSFT

Similar Messages

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Diagnostics Data for Virtual Machine and Cloud service

Hi,
We have an azure cloud account, contains Virtual Machine(Windows) with worker role and one Web Role. In this setup, we need to collect diagnostics data of virtual machine and cloud service. How to enable the diagnostics data in our setup and How to retrive
the data
I have read the below link says diagnostics data stores in WAD Table. How to read the data from table? Is there any query available.
Or can we get this data from REST API. We need the perfomance data of every 5 min . Please help me to solve this.
http://msdn.microsoft.com/en-us/library/azure/hh411534.aspx
Thanks & Regards
Rathidevi

Hi,
You can configure Azure diagnostics by using Visual Studio. Azure diagnostics captures system data and logging data on the virtual machines and virtual machine instances that run your cloud service and brings transfers that data into your storage account.
References :-
http://msdn.microsoft.com/en-us/library/azure/dn186185.aspx
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-dotnet-diagnostics/
Regards,
Mekh.

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cluster Disk keeps going offline. Service or application failed

We currently have 2 servers, both housing 3 VMs (6 nodes total). 2 Disk are used to house these VM's. Cluster Disk 1 keeps going offline, which kicks 2 of our servers offline until we migrate the disk to another node (puts it into redirected
mode). We then have to restart the server to re-establish to connection to the cluster disk. Digging around in event viewer, I saw the following:
Cluster resource 'Cluster Disk 2' in clustered service or application 'b0a21897-e59b-46c9-a495-273dc5ad2aea' failed.
Cluster physical disk resource 'Cluster Disk 2' cannot be brought online because the associated disk could not be found. The expected signature of the disk was '{92eb716c-6878-42ad-b7de-f3879d72e232}'. If the disk was replaced or restored, in
the Failover Cluster Manager snap-in, you can use the Repair function (in the properties sheet for the disk) to repair the new or restored disk. If the disk will not be replaced, delete the associated disk resource.
The Cluster service failed to bring clustered service or application 'b0a21897-e59b-46c9-a495-273dc5ad2aea' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service
or application.
I ran the cluster validation test and all seemed to check out except for Cluster Disk 1 and the two servers associated with this server, as shown below:
Validating cluster resource Cluster Disk 2.
This resource is marked with a state of 'Offline'. The functionality that this resource provides is not available while it is in the offline state. The resource may be put in this state by an administrator or program. It may also be a newly created
resource which has not been put in the online state or the resource may be dependent on a resource that is not online. Resources can be brought online by choosing the 'Bring this resource online' action in Failover Cluster Manager.
This resource is marked with a state of 'Failed' instead of 'Online'. This failed state indicates that the resource had a problem either coming online or had a failure while it was online. The event logs and cluster logs may have information
that is helpful in identifying the cause of the failure.
All disks are housed on our SAN. Any idea where I can start troubleshooting further? Changing the signature of the disk or finding out which application is failing? All help is greatly appreciated.

Please, help is greatly appreciated. I have been trying to find a solution for almost a week. I have a feeling this has to do with the disk. We have 3 CSV's but the only ones in question are CSV 2 & 3. Cluster Disk 2 is the disk that
keeps going offline. Cluster Disk 3 has no problems at all. They both are GPT volumes, however, after running a "cluster res", I received the following output:
Listing private properties for 'Cluster Disk 2':
T Resource Name Value
D Cluster Disk 2 DiskIdType 1 (0x1)
D Cluster Disk 2 DiskSignature 0 (0x0)
S Cluster Disk 2 DiskIdGuid {92eb716c-6878-42ad-b7de-f3879d72e232}
===============================================================
Listing private properties for 'Cluster Disk 3':
T Resource Name Value
D Cluster Disk 3 DiskIdType 1 (0x1)
D Cluster Disk 3 DiskSignature 994692308 (0x3b49ccd4)
S Cluster Disk 3 DiskIdGuid {4f27bc43-6964-466e-a77d-2321b2b0b718}
=============================================================
As shown, cluster disk 1 has a disk signature but NOT a diskID. Cluster disk 2 as a DiskID but NOT a signature. It may be beneficial to add that cluster disk 3 used to be an MBR disk. Not sure if that makes any difference given the output
above...Performing DISKPART on the same disks shows the following (Don't mind the naming scheme, I know it can be a bit confusing)
Disk 1 (Cluster Disk 2):
HP P2000G3 FC/iSCSI Multi-Path Disk Device
Disk ID: {92EB716C-6878-42AD-B7DE-F3879D72E232}
Disk 3 (Cluster Disk 3):
HP P2000G3 FC/iSCSI Multi-Path Disk Device
Disk ID: {4F27BC43-6964-466E-A77D-2321B2B0B718}
================================================================
Comparing the two, it selects the correct DiskID that was taken from "cluster res" command.
The error in my initial post states a signature was expected. If I am not mistaken, in win2008 it uses "DiskSignature". The lack of this signature being populated for Cluster Disk 2 was resulting in the resources failing to come online. So
how can i go about fixing this signature issue. Again, all help is appreciated since I am fairly new to all of this.

Virtual machine of Lion OSx 10.7 server on my MacBook Pro running Lion 10.7?

I'd like to create a better disaster recovery plan. My thought was to create a virtual machine of Lion OSx 10.7 server on my MacBook Pro running 10.7. Is that even possible?

Disasters for you primary tends to take down the disk. That would kill your VM 10.7 Server fail-over.
Yes, you can VM "server", but I advise using CarbonCopyClone to keep a copy of the main disk but on an external drive, two separate external drives if you can afford it. CCC will clone the Recovery Partition, and the odds of all three drives failing at the same time are very low. Just keep the clones current by backing up at least once a week, if not once a day. You can rotate one of the clones to a freind's house for better protection.

How to increase java virtual machine.. i am using Ocj4 server

How to increase memory size java virtual machine.. i am using Ocj4 server
Edited by: java_net on Aug 29, 2008 4:09 PM

Google ( [oc4j heap size|http://www.google.com/search?q=oc4j+heap+size] )

How to create clustering on oracle application server on windows

hi,
i want to know how can i create clustering on oracle application server on windows machine.
regards

I think that you need to configure Web cache for this as a frontend, and two or more servers behind it.
Try to read :
Metalink DOC ID 312834.1
http://www.oracle.com/technetwork/developer-tools/forms/documentation/advancedformsconf-128186.pdf
Edited by: Marcos_Pawloski on 15/12/2010 00:02

Question on potential configurations for resource cluster as virtual machine server / beowulf / render farm

I am looking for a starting point on where to focus my efforts in researching a desired configuration. Of course anyone who spends anytime researching in forums knows that one thing that people hate is for people
to ask questions that can be easily answered with a simple Google search, so let me start by saying I have done many hours of research on this already. The problem I am having is that although there is a huge amount of information out there on what I
am looking to do, I don't believe many people have attempted this on as small of a scale as a single user system. Also, the amount of routes to go down seems endless, which for me so far has led to many hours of wasted trial and error. So keep
in mind that I am not so much looking for a handout on answers but rather a more narrowed path of searching and researching.
What I am looking to do is take the current equipment that I have and consolidate it into a 9-12U server rack using mounted 2 or 3U atx cases so that I can have a more organized, space saving setup. That is the
easy part, what I have been looking into though is the combining of cores and processing power to make a "super computer" yet I use this term very loosely. From what I have read, the closest thing I can compare the idea in my head to is referred
to as a Beowulf Cluster, or a Render farm but I believe as the name suggests that this is more dedicated to a single task of rendering. I like the idea of a virtual machine server where I would never actually locally use this machine but rather set up
many virtual machines that I can remote into. I started to compile a ProxMox Server, and this was the right idea, however when running a VM, that VM is constrained to the hardware resources of the single node that it is assigned to. If there is
a way to be able to have a machine that would utilize the 20 some odd cores that I would have in the cluster, along with the 40-50 gigs of ram, well that would be ideal but sounds too good to be possible. Also, ProxMox isnt quite there in compatibility for
a home/home office user. I understand that the programs that are used have to be written in a way where the architecture allows for such, but if it could even be used for speeding up my render time with Adobe and Autodesk (which I know do have such functionality)
that would be wonderful.
So without writing a whole book I am looking for suggestions on how to proceed. Can I literally build a "super computer" that is not really that super... more mediocre super... or am I better off just consolidating the hardware but not the
OS's and programs. Also, I do currently use three or four different distros of Linux, mostly for ethical hacking and security type work like pen testing. One thing I have never been a fan of though is dual booting. Perhaps investing
in a hot-swap HDD chassis that I could load all the different OS's on where I could just pop in whatever OS I am looking to use. As you can see I am far from knowing where to spend my efforts in research.... THANK YOu for ANY help.
I was recently suggested Microsoft HPC Pack as a platform? Anything?
Here is what I currently have:
these are all fully built)
Intel i5 3.7 quad core
Nvidia (ASUS) GTX-760
16 Gb DDR3 @ 1600 Corsair
ASUS Sabertooth Z87 MoBo
Autodesk - Inventor, Revit, 3Ds Max, Maya, Fusion 360, Flow, etc.
Adobe - PhotoShop, After Effects, Dreamweaver, Illustrator, etc.
Basically as you can see this is used for my work in 3d modeling, rendering, and drafting along with 3D printing.
Sys. #2
AMD 4.7-5.0 8 Core
Nvidia GTX 760 (Same as sys #1)
16 Gb DDR3 @ 2400 Mhz
ASUS Crosshair V Formula Z
Various programs for programming, app development, gaming, etc. (This is my daily driver)
Sys #3
AMD 4.5-4.7 8 core
16 Gb DDR3 @ 1600 Mhz
Asus Crosshair V Formula Z MoBo
Not currently using this one but is fully functional.
Sys #4
HP built i5 3.4 quad core
12 Gb DDR3 @ 1600
Nothing Special - this is the one I was using for school work but being that school and programming became one and the same I have all but abandoned it.
THANK YOU AGAIN TO ANYONE WHO HAS MADE IT THIS FAR in reading this.

The cluster works only for standalone webcache and httpserver installations types.
If you want to do this you have to use dcmctl command to change from one farm to another.
try checking with dcmctl command with out options an dyou will get a full list of options.
then run dcmctl usage(orhelp) option to see what you need.
As far as I remember
you have to check the farm id of the server you want to be the master
then in the second, you have to run dcmctl joinfarm or something like that.
Regards.

Virtual network, virtual machine and cloud service

Hi everyone
I am new to Microsoft Azure and very confused about Microsoft VM and Virtual network relationship.
I have a cloud service project created which has two worker roles in it and its deployed to Azure portal successfully, the problem is they need to connect to SQL database (which is on our prod machine outside of Azure) and in the config file of both these
worker roles I have the cluser IP address added ( I believe its an internal Ip address),
Now we have a virtual machine and a virtual network created on azure too (Not by me, so I have no idea how that is created)
Some how I need to connect my cloud service to either the virtual machine or virtual network to get the sql connection going. What do I need to do to make that happen?
How does the cloud service connect to virtual machine?
I am so confused .. Please help with this.
Thanks
-Sarah

Hi Sarah,
Once an Azure VM is created, it belongs to a cloud service.
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-connect-virtual-machine/
Do you mean that you want to create a VM in a virtual network and a cloud service?
If yes, please follow the steps below:
1. Create a Virtual network.
2. Create a VM and select "create a new cloud service", and choose the virtual network you have created.
3. After the VM is running, you can create other VMs into that exsting VM, and they will share the same public IP address and in the same virtual network.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

Does clustered MSDTC require Application Server role in Windows 2008 R2?

I'm reviewing a windows 2008 R2 2-node Active/Passive cluster which has clustered MSDTC and SQL Server.   The strange thing is that Application Server role is not installed. I thought MSDTC requires Application Server role in order to be
clustered.

Hi Mark,
I look into this more and it seems to me the Application Server role (at least for the Distributed Transactions area) is just another way to configure Distributed Transaction Coordinator instead of using the Component Services Administrative Tool.
Also, the configuration has nothing to do with clustering.   So, MSDTC requires configuration regardless of clustering or not and the configuration can be done through Application Server role and/or Component Services Administrative Tool.
Is my understanding correct?
Thanks.

Multiple call managers and clusters sharing one application server

Hi
I need to program my application such that it can be shared by multiple call managers and clusters. That is, I can only have one application server, and as a result I need to tell my application from which call manager / cluster this "request" is coming from.
My question is how do we do that? do we have access to some parameters / variables, similar to "#DEVICENAME#", which can be used to pass the call manager identity to the application?
TIA

Use multiple instances of your application with different URIs (assuming the instances will not have to talk to each other), then, when configuring the service on each cluster, simply reference the specific URI of the application instance for that cluster. eg: Using Tomcat to host the PhoneMessenger application for Cluster1 and Cluster2, Deploy the same application twice: PhoneMessengerForCluster1 and PhoneMessengerForCluster2. The service URL on Cluster1 might be: http://app_server/PhoneMessengerForCluster1/servlet/PhoneMessenger , and for Cluster2 it could be http://app_server/PhoneMessengerForCluster2/servlet/PhoneMessenger

Problem with clustering of oracle application server 10.1.3.1

Hi
I have clustered two instances of oracle application server 10.1.3.1 running on solaris.
Instance 1
<notification-server interface="ipv4">
<port local="6100" remote="6200" request="6003"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
     <topology>
          <nodes list="10.x.x.1:6201"/>
     </topology>
</notification-server>
Instance 2
<notification-server interface="ipv4">
<port local="6101" remote="6201" request="6004"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
<topology>
          <nodes list="10.x.x.2:6200"/>
     </topology>
</notification-server>
But when i log on to enterprise manager i get the following message on top of the page:
You have more than one instance of the Application Server Control application running in this cluster. This is not a recommended configuration and could lead to unexpected problems. Please stop the additional instances of Application Server Control or disable routing to these instances.
When i click on one of the instances, i get the session expired error.
what is the problem behind this?
regards,

In the doc, it states that you should only ever have one active instance of application server control running in a cluster at a time -- ASC was not designed to operate as a session sharing application, so your session state is specific to one instance. If for some reason you were directed to the ASC application on the other instance, you get errors.
You can use the OC4J admin_client.jar utility or the opmnctl command to shut down the ascontrol application in one of the instances.
-steve-

Creating an SMF service for application server

Hi... I'm not sure this is the proper place to post this
I installed application server 8.2 pe on Solaris 10 6/06 and I tried to create a service using asadmin create-service, but the option fo creating service does not seem to exist. Is it a matter of the version, type of app. server? any suggestions?
Am I supposed to try this old style: http://docs.sun.com/app/docs/doc/819-4712/6n6rit5q5?a=view

Hi Roman Dubov
Here is the step-by-step guide of How to Create ICF Service from an Existing Service:
Just have a look:
http://help.sap.com/saphelp_bw30b/helpdata/en/78/9852aec06b11d4ad310000e83539c3/content.htm
Cheers,
Vijay Raheja

Constantly "Cluster resource 'Virtual Machine' in clustered service or application 'SERVER' failed

Similar Messages

Maybe you are looking for