Constantly getting Stuck Midi Notes w/ LP & Digi 002R

Running LP 7.1 & Tiger on a G5 DualCore 2.0
I'm constantly getting stuck notes (hanging) with using a Digi002R's midi ports going to a Roland XV5080, the other is going to a Motif ES. It's happening more than just once in a while. Any ideas on what is causing it?

Crazyhorsestudios wrote:
I don't have 8.02 installed just what came in the box 8.0. Yes I am using the DAE Engine as it activates because I am playing audio through the Digi002R.
That may be it. But I have to believe I am not the only one using MTPAVs as they are extremely popular. They all can't be using Unitors?
Completely legal I have the box any everything. I wouldn't even know would you even get a cracked version. Too problems taking me away from music to add bootleg software to the mix.
You should be able to upgrade to 8.02 via Software Update or in Apple's download section. The initial release of Logic 8 was terribly buggy.
Choose an external MIDI track. In the "Inspector" on the left hand side of the screen you will see the Port: designation. Do all of the MTP's show up there, whatever you do don't set it to ALL. You should be able to choose the correct MTP and underneath that, the channel.
You might try disabling DAE and see if the problem persists.
Here's another idea. Are you using MIDI Clock Sync on any of your external synths.
Go to Settings/Synchronization/MIDI Tab
If you're not using MIDI clock sync.. set all "Destinations" to off and then disable every checkbox, same for MTC and MMC.
If you are using MIDI clock sync activate the Send MIDI Clock checkbox and select only a single MTPav as the destination.
Remember, Settings are on a per song basis, Preferences are Global.
Thanks for answering the bootleg question, lately there's been quite a bit of that around here.. these are user forums and it makes it difficult to try and help people when they're using old dodgy version of plugins and programs they shouldn't have in the first place.
p.s. you aren't using rewire for anything, are you?

Similar Messages

Hi All, My iMovie opens and few secs later gets stuck! Not Responding! Any idea?

Hi All,
My iMovie opens and few secs later gets stuck! Not Responding!
Any idea? All up to date, OS X, MacBookAir...

Check memory and disk space (use Activity Monitor), and please report back. Also try closing all other apps.
What version of iMovie and OS X?

I'm getting a stuck MIDI note with Garageband 10.0.2?

Using IMAC 3.2Ghz Intel Core i5 running Garageband 10.0.2 with a Yamaha PSR-3500 with MIDI to USB interface.
Everything seems fine at first but then one note will be 'stuck' and continuously sound. Some following actions may stop it, including switching the keyboard mains power on and off. It doesn't seem to be a continuous signal sent because I can see the corresponding MIDI note is not appearing on the piano roll etc. It's just like Garageband 'won't let the note go'?
Any ideas would be appreciated, especially if there are any long-time MIDI users out there - I am brand new to MIDI, via Garageband.

Welcome to the Apple Community Russell.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I am constantly getting "page is not found." Why does this keep on happening? I have the most recent updates.

I would estimate that this has started to happen about a month ago. I am getting "page is not found" on a multitude of sites. Some are from Yahoo, some from Facebook, and others are from various sites. It doesn't matter where the site is from- it happens to all of them. It is getting to be so annoying I am almost debating to go back to using Explorer, as much as I dislike that browser as well. Any help with this issue would be greatly appreciated.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

My syncing my iphone to itunes, it constantly gets stuck on step 2 of 8, backing up. I can't get any further to sync any further data. Can anyone help please?

I need someone to help as i cannot sync any music or get my audio message off my phone. How do I get passed step 2 of syncing???

If it's getting stuck in step 2 it probably means the previous backup is corrupt someway. I would remove the last backup (copy it to another location for safe keeping) and then try to backup again manually.
If you tell me what kind of computer you have I can give further instructions for moving your backup to a different location.
What happens if you cancel the sync and do a manual backup?
right click on the device in the left-hand column of itunes, and select backup from the menu that appears.

IPOD is getting stuck and not responding.

Hi All
I have IPOD with a click wheel(model no. M9282CH
Version 3.1.1)
I bought this on dec 2005.
But for the past 2 months there seems to be a problem with my IPOD. it gets stuck when it is playing songs. (randomly)
Can some one please throw some light on this. it really would be of great help thanks. Ihave tried all the solutions mentioned here. couple of them seem to work but (like resetting) but all the songs are getting deleted.
Is there no permanant solution to this.
I have tried restoring to the factory settings and downloading all the updates and the latest itunes also.
Please some one let me know if there is a solution to this
apart from resetting it every time this happens.
Cheers
M9282CH Windows XP Pro Ipod with click wheel

This is the Final Cut Pro forum. The iPod forums are here: http://discussions.apple.com/category.jspa?categoryID=146

My firefox is constantly getting stuck and says firefox is not responding. i just bought this comp and am running windows 7.

it seems to freeze up constantly and will not move. it did this opn my last comp also which was running vista. i can't understand what could be causing this problem.

Have you tried "Run" instead of "Save?"
Do you have anti-virus software on the PC? If you do, try disabling the anti-virus for just 15minutes to allow the download to finish.
Hope one of those helps.

PS CS4 constantly gets stuck in the layer "options" menus

I'm talking about things like the Opacity, Fill, or.. I never know what to call that sucker with the "Normal, Dissolve, Multiply," etc. options. (Sorry, I'm not a newbie, just never had a term for that presented to me.)
If I use one of those drop-down menus, then try to do something else, e.g., select the Text tool by pressing "T" (I have my setting as such), I get nowhere. Photoshop ignores every attempt to move out of that layer options box.
I've tried hitting ENTER as has been suggested: no change.
I've tried hitting the Spacebar: no change.
Only after manually clicking - sometimes several times - various other items in PS do I get a change in selection.
Seeing as I try to use the mouse as *in*frequently as possible - thus relying on the various hot-keys in PS to maneuver around, this is excruciatingly annoying. Often times I don't even notice that my tool selection/change hasn't taken; only to realize that the last several keystrokes or mouse moves I've made haven't taken because... my 'selection' (cursor?) is stuck in one of those options menus.
Not sure what to do. Maybe there's a post out there abou this, however, if there is, I've been unable to come up with appropriate search string by which to find it.
Thanks, in advance,
Jennifer

That sucker is called "Mode" or "Blending mode" it says it on the options bar and the tool tips.
It sounds like you have a mouse problem (probably lack of use ). Try a different one or unplug/plug it a few times.

PA20,PA30, PA40 getting stuck and not responding

Hi Experts,
I am facing an issue where the transactions PA20,PA30, PA40 do not respond at all, or they respond after 603000 m/s approximately.
This is happening in all servers for the same transactions.
We have checked the system for any back up's or any load on system but there is hardly 4% usage shown in our system.
This is the 4th time we are facing this kind of issue.
Can you please help me understand the possible reason for the same.
Thanks and regards,
Jailakshmi

Hi,
Thank you for your response,
This is not happening with only a few users hence it cannot be a authorization issue.
When this happens it happens for All our servers Development, QA and PRD these transactions hang.
Also it doesn't happen only for a selective few users it gets non responsive for all users at once.
Can you explain in detail if possible with example how it can be a Authorization issue as i really need to resolve this issue permanently.
Please let me know if i need to make any changes to resolve this issue.
Regards,
Jailakshmi

Office 365 - Outlook 2013 - Messages constantly get stuck in Outbox

We are using McAfee web filtering devices, where I have the option of scanning SSL traffic, I know and understand the SSL technology but still have a question in my mind, so it is better to get some suggestions.
Any suggestions will be highly appreciated.

العملاق للصيانة بمصر
اكبر مركز صيانة بيكو
35699066 || 01023140280 || 35710008
01154008110 ||01223179993
توكيل بيكو ، توكيل بيكو ، توكيل بيكو ، توكيل بيكو
توكيل بيكو ، توكيل بيكو ، توكيل بيكو ، توكيل بيكو
توكيل بيكو ، توكيل بيكو، توكيل بيكو ، توكيل بيكو
صيانة بيكو ، صيانة بيكو ، صيانة بيكو ، صيانة بيكو ،
نبذه عن تاريخ الشركة :
رائدون فى صيانة الاجهزة المنزلية جميع الماركات ( ثلاجات نوفرست _ غسالات فول اتومتيك _غسالات اطباق _ تكيفات _ ايس ميكر _ ديب فريزر نوفرست _دراير _ نشافة_ غسالات هيفى ديوتى _ غسالات باب امامى _لاندرى _ مجفف
، beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko beko...

Pro cc gets stuck and stops responding constantly

For some reason my Premiere Pro CC will constantly get stuck performing a task, often incredibly simple ones, never complete it or even start it and then when I right click on it it says it's stopped responding and I have to close program and often restart teh computer and then whatever the task was works perfectly. This happens when adding a new file to the mediaborwser or when rendering something simple very very often. any thoughts?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Why does my ipod 4g constanlty get stuck on apple logo

Why does my ipod 4g constantly get stuck on apple logo

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
I do not understand what you mean by constantly.

Headphone sound option gets stuck even when headphones have been removed.

I use my headphone jack to play music from my pre on my car stereo. My pre is also bluetoothed for phone calls through my vehicle. The phone constantly gets stuck on the headphone option and will not switch to bluetooth even when the jack has been disconected. I then have to shut down the bluetooth and restart it to get the phone to work. What is the point of bluetooth if I have to manually fiddle with it while I am driving. The bluetooth should overide the headphone jack and then drop back to headphone when the call is over. My palm treo had absolutely no problems doing this. I have been complaining about this for awhile now perhaps on the wrong boards, under bluetooth sync problems. Please find a fix for this as it is really anoying.
Post relates to: Pre p100eww (Bell)

Yes I did try that when I had the no sound issue and it fixed it. This is a different issue. The real issue is that I cannot reliably use my bluetooth if I use any other option wether it be headphone or speaker or regular phone for that matter. The phone will get stuck on whatever option was being used and won't go to bluetooth even when you click on it in the phonecall mode. I have been complaining about this from the day I purchased the phone. I had complained about this at an earlier date in the bluetooth syncing issues section of the site not realizing at the time that this is not a sync issue but something else. I should be able to have my headjack plugged in and the bluetooth should overide ride it when a phone call comes in. My palm trio never had this issue and was being used in the same fassion. I really need a fix for this as I am probably in my car most of the time using my Pre exactly as I described to you. Sometimes it works, sometimes it doesn't and I never know when it's going to do it. I use my phone for business so this can also be a bit embarassing when I can't pick up a clients call or I have to hang up on a client because I can't get the phone to switch over. Any help with this would be greatly appreciated.

Program gets stuck in the middle of a click

When I'm using Google Chrome for browsing this happens a lot. It's when I'm clicking something, like a new tab, a link that opens a new tab or basically anything, Chrome gets stuck, does not freeze or anything, just stuck. The mouse, keyboard and everything works. But because of that, all pages stops loading until I click the trackpad once again. Then everything is back to normal.
It almost seems like the OSX thinks I'm "dragging" something. But I can't see that there is anything under the mouse pointer.
The issue have been present for more then a year.
I've also never ever had any issues with my trackpad in any sense. I think this is software related.
The problem occurs frequently in Google Chrome. I can't remember if it happens in any other application.
I also can't reproduce it. Problem seem to happen randomly.
Anyone else have the same issue?
Suggestions on how to fix this? Or what it could be?

Hi IamMille and welcome to Apple Support Communities,
First update your software to at least 10.6.8.
Then reset PRAM and SMC:
http://www.guidingtech.com/30498/what-is-pram-smc-mac-reset/
>It almost seems like the OSX thinks I'm "dragging" something<
It might be that there is a cable problem w/ the trackpad or the track pad needs an adjustment.
Worst case, replace the track pad.

Photoshop CC gets stuck on scanning for plugins

Windows 8.1 i7 256Gb SSHD
Photoshop Creative Cloud newly updated
On clicking photoshop icon task manager show photoshop stuck in Background Process
doesn't move up to Apps
if photoshop later starts after many minutes then
it gets stuck for minutes on scanning for plugins
when scanning for plugins task manager shows that it is essentially idle
whereas LR opens immediately and shows CPU use up over 20%
PS CC still at zero
about 10 or 15 minutes later then PS finally wakes up
What is the problem with photoshop getting stuck on not starting only starting as a background process and then not scaning for plug ins until 5 or 10 minutes later?

A frequent reason for stalling Photoshop on start up, are bad font files, so I would think the same would be true with a corrupted filter or plugin.
CC handles third party plugins differently to older versions, and you can't point to a folder like you could with CS6 etc. This link might help
https://support.alienskin.com/hc/en-us/articles/200145325-Using-a-custom-plug-ins-folder-w ith-Photoshop-CC

Constantly getting Stuck Midi Notes w/ LP & Digi 002R

Similar Messages

Maybe you are looking for