Constantly occuring BLUE SCREEN with T510
Hello,
I bought a Thinkpad T510 model 43494JG with Windows 7 a few month ago and it is constantly crashing.
For now reason a blue screen appears every few hours.
The report of the crash is the following:
Problem Computer:
Problemsignatur
Problemereignisame: BlueScreen
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
Weitere Informationen über das Problem
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050031
BCP3: 00000000000006F8
BCP4: FFFFF8000309AEC8
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Bucket-ID: X64_0x7f_8
Serverinformationen: 893176a7-61f6-490f-bb71-25bd1574bec4
I already tried to update the main drivers to the newest version, but the problem still occurs.
Since I am writing on my final thesis right now and only have a few days left to write, the problem becomes really annoying. I hope someone can help me as soon as possible.
Thank you and best wishes,
Tobi
Bad luck, BCCode: 7f BCP1: 0000000000000008 suggests some hardware issue. I guess you cannot afford to send it for repair right now..... so you'll have to do with it for a while.
Otherwise the standard procedure would be to:
-take a full backup of the system
-restore the system to "factory installed software" only
-use the computer for a while with only factory software (browse the web or watch movies or something). If you get the error then contact lenovo for warranty repair; if you don't get the error then install your software one at a time and see which one will reintroduce the error.
Nap.
Similar Messages
-
When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :) -
My touchsmart will not boot allI get is a blue screen with f key to do different things
My Touch smart desk top will not boot when I turn it on all I get is a blue screen with HP in the center and f key functions
Hello charleshobby:
Your computers start up has been corrupted. No big deal. Turn on your computer hold down on F-8 key as you turn it on. This should put you in safe mode. If f-8 key fails then just disconnect the power cord at the power adapter and plug it back in and turn on your computer (This is called a fource start up) automatically puts your computer into safe mode. Use your arrow kek select safe mode with net work. Top one I belive. In safe mode close out Help and Support window displayed. Open up Recovery Manger and select Microsoft System Restore. Click next then click next again now a list of dates will appair choose a date before this event occured. Click next and let your computer complete the sytem restore. My guess Microsft up dates caused this issue. After this is finished now go back and change all your update setting to down load up dates but let me choose witch ones to install. Only install three at a time. To a void future occurances and black screen or blue screen issues. Follow these steps for blue screen or black screen. Please click on Kudos if this has resolved your issue. Thank you frrw. -
Blue Screen with spinning coloured wheel
My girlfriend borrowed her iMac G4 Flat Panel to a friend and now it won't load the OS properly.
The following happens:
1. The grey screen appears (with the smiling MAC in the middle)
2. The Mac OS X start-up screen appears with the progress bar
3. Then a blue screen, with a spinning coloured wheel in the top left corner
4. After a couple of minutes, a few windows pop open (probably whatever the person accessed last)
5. The windows disappear and all you're left with is a blue screen and spinning coloured wheel in the top left corner
6. The MAC then remains in this state indefinitely
Unfortunately, I’m unable to tell what version of the MAC OS is running.
We cannot find the OS disk either.
I will greatly appreciate any assistance anybody is able to provide.
ThanksBrannas...
Empty,Blue Screen.
http://docs.info.apple.com/article.html?artnum=106464
1. Start up in Safe Mode.(shift key at startup)
a. Drag the Fonts folder from the Mac OS 9 System Folder (not the Mac OS X System folder) to the desktop.
b. Drag the Fonts folder from ~/Library/Fonts to the desktop.
b. Restart the computer in Mac OS X.
c. If this solves the problem....you have a corrupt font in one of the above font folders
2. Remove incompatible third-party startup items.
a. Start up in Safe Mode.(shift at startup)
b. Open the Mac OS X hard disk.
c. Drag third-party items out of ....
/Library/StartupItems .......
/System/Library/StartupItems ...
Place them on the desktop .... If you're unsure whether an item is a third-party item or an Apple-installed item, don't move it.
d.Restart the computer.
Note.. If this resolves the issue, add the Startup Items one at a time until the symptom occurs again. That way you'll know which one is incompatible. Repeat these steps and remove the incompatible item.
3. If your computer still starts up to a blue screen, follow these steps.
a. Start up using cpmmand+S....(Single-User Mode).
b. Type: mount -uw /
c. Press Return.
d. Type:
mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
Tip: There is a space between ".plist" and "preferences".
e. Press Return.
f. Type:
mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
g. Press Return.
h. Type: reboot
i. Press Return.
4. Reset certain privileges.
a. Start up the computer in Single-User Mode.
b. Check the volume with fsck.
c. Type: mount -uw /
d. Press Return.
e. Type: chmod 1775 /
f . Press Return.
g. Type: reboot
h. Press Return.
george -
My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??
-
i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks
See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)
Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag -
Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se
I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
The verification of a KnownDLL failed. system process terminated unexpectedly with
a status of 0x0000221 (0x007fb9c0 0x00000000).
The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP. -
My macbook13in has a blue screen with error code 10813
my macbook 13in has a blue screen with error code 10813
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Satellite A350 - Blue screen with error message
When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too. -
Blue screen with error message
Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
My C5280 All in one printer flashes a blue screen with error B0248122.
It flashes a blue screen with a different B 8 digit number each time. All the buttons on the front flash yellow. I have to unplug it to turn it off. Occasionally it will say to turn it off and turn it back on, but it rarely solves the problem. This used to be an infrequent problem, only appering occasionally, now it is all the time and am not able to use my printer at all.
Any ideas?Hello,
This error typically is caused by some issue with the ink delivery system.
Recommend to follow some steps mentioned in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&lc=en&cc=us&dlc=en&product=4083871#N51
Hope this helps.
I work for HP. -
Stuck on blue screen with clouds rainbow, floated ...
As it says.
When I start Skype, it goes straight to a blue screen with blue clouds and a green rainbow at the bottom. I get no prompt to login. I have followed various guides, such as renaming login to login1, deleting login, restarting the computer, uninstalling then installed skype (which gets me an error code 2734 I think), uninstalled and installed Internet Explorer. I have run windows update and everything is up to date. I also followed the advise in the floated topic, and even after using Command Prompt (which was not in Accessories folder, had to search cmd to find it) and restarting, the 'click this button' does not work.
Skype was working fine on Sunday, and now it is broken. The only thing I have done in the meantime is run a repair tool for Windows Media Player as a game I installed required it to play in game music.
EDIT: I use Windows 7.
Solved!
Go to Solution.Scripting in Internet Explorer might be disabled by an Antivirus software. What Antivirus software is installed on your computer?
Meanwhile you can try the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address).
Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes.
Open this folder on your computer:
C:\Program Files (x86)\Skype\Phone\
You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now:
"C:\Program Files (x86)\Skype\Phone\Skype.exe"
Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /legacylogin
Click OK to save the changes. Start Skype using this new shortcut. Can you now login to Skype? -
I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.
Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem. -
Macbook Pro 10.6.8 won't shut down. Blue screen with spinning wheel.
it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5. Any solutions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.
Maybe you are looking for
-
Software update wiped my calendar. My contacts were OK. Is there some way to access the calendar? Also the calendar format is different and I do not like it. Is there some way to go back to the prior format?
-
Adobe Acrobat X not opening PDF correctly
We created a 50+ page document in InDesign CS5 on a mac then exported that to a pdf file using the export feature in InDesign. 100s of people have downloaded this document and able to open and print with no problems. However we have a person that is
-
Owb 9.2 compatible w/ HP-UX 9.2.3?
Is OWB 9.2 compatible with HP-UX 9.2.3? A Follow-up Question. Where can I find certification documemntation for older releases of Oracle products?
-
Can't download an app off the app store, I get error 100.
I am trying to download the Logic pro x app from the app store but with no luck. I keep getting error 100. I have tried all the basic procedures shown on the mac support page. My debit card is fine, I just purchased this mac 2 days ago. Does anyone k
-
I just typed all this in a detailed post and the horribly broken web app that is Apple Discussions errored and lost everything. I was lied to at the Apple Store and told my Feb 2011 iMac included a free upgrade to Lion. I've given up on that and ju