Constantly Rebooting Connectme Device

Any way I can RMA these Freetalk Connectme devices? I bought 3 of them thinking I would give two away as Christmas presents. So far, 2 out of 3 of them when plugged in start with the usual stead red light, I then get a link light on the switch, followed by a blinking green light on the unit. All looks good. 1-2 minutes later, the link light drops, the Connectme light goes to red, then the whole process repeats. The process goes on perpetually. I cannot even log on to the Connectme. Perhaps it should be called Disconnectme?

I purchased two and one does the perpetual reboot while the other does nothing.
I get no replies from three complaints to the Freetalkconnect.com staff.

Similar Messages

  • Aging Mac Pro constantly rebooting

    My aging early 2008 Mac Pro is constantly rebooting, almost always when I'm away from the computer. When it reboots, I have to reset audio, which has defaulted to my MOTU Audio Express. The Mac Pro is exhibiting other odd symptoms: Occasionally, upon resumption from inactivity, the keyboard and mouse will have quit working. The Bluetooth Apple Magic Pad continues to function. A restart is the only fix. Also, occasionally, the Mac Pro will refuse to wake from sleep. Sometimes I must do a forced restart to get out of that. Other times, it will wake up on its own after a period of about 30 seconds.
    It also seems to go into a harder sleep — rather than the monitors just lighting up as they usually do, it will hesitate a moment and the fans will cycle up loudly.
    I was having similar issues months ago. I installed an SSD drive about six months ago, did a clean system install and migrated files over, and everything was working smoothly until the last week or so, and all the problems have resurfaced, with a vengeance. I reinstalled Mountain Lion, but that didn't help. I've considered another clean install or a Time Machine recovery from a month ago, but I really don't want to have to go through that every six months.
    Any ideas? I'm half considering buying a new Mac Mini and using the pro as a file server or something.
    Here is a copy of the report I get after the machine reboots.
    Interval Since Last Panic Report:  27009 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    *********
    Fri May  3 05:40:33 2013
    panic(cpu 1 caller 0xffffff800c6b7e95): Kernel trap at 0xffffff7f8d5c467a, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x000000000ef7f000, CR4: 0x0000000000000660
    RAX: 0x0000000000000000, RBX: 0xffffff7f8ccb9d10, RCX: 0x0000000000000000, RDX: 0xffffff7f8ccb2be8
    RSP: 0xffffff8118dcbd00, RBP: 0xffffff8118dcbd30, RSI: 0xffffff801f0faf00, RDI: 0xffffff801f17e840
    R8:  0x0000000000000001, R9:  0x0000000000000001, R10: 0xffffff801ef63fc0, R11: 0xffffff800ca47120
    R12: 0xffffff802264ec00, R13: 0xffffff8118dcbd00, R14: 0xffffff801f386000, R15: 0xffffff8033952948
    RFL: 0x0000000000010246, RIP: 0xffffff7f8d5c467a, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff8118dcb9a0 : 0xffffff800c61d626
    0xffffff8118dcba10 : 0xffffff800c6b7e95
    0xffffff8118dcbbe0 : 0xffffff800c6cd4dd
    0xffffff8118dcbc00 : 0xffffff7f8d5c467a
    0xffffff8118dcbd30 : 0xffffff800ca31c77
    0xffffff8118dcbd40 : 0xffffff800ca2fc29
    0xffffff8118dcbd80 : 0xffffff800ca2e4fb
    0xffffff8118dcbdc0 : 0xffffff800ca2e0f7
    0xffffff8118dcbe30 : 0xffffff800ca2f75c
    0xffffff8118dcbe40 : 0xffffff7f8cc9305b
    0xffffff8118dcbe70 : 0xffffff7f8d7a0252
    0xffffff8118dcbeb0 : 0xffffff7f8d7a3ad0
    0xffffff8118dcbee0 : 0xffffff7f8d7a3fd8
    0xffffff8118dcbf40 : 0xffffff7f8d79f3c1
    0xffffff8118dcbf60 : 0xffffff800c63dcfe
    0xffffff8118dcbfb0 : 0xffffff800c6b2977
          Kernel Extensions in backtrace:
             com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8cc7f000->0xffffff7f8ccdafff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8cc44000
             com.apple.driver.AppleUSBHub(5.5.5)[54546EC2-8891-334B-9626-1EF6A02450DE]@0xfff fff7f8d795000->0xffffff7f8d7a9fff
                dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8cc7f000
             com.motu.driver.FireWireAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffff ff7f8d56b000->0xffffff7f8d5ecfff
                dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8cc7f000
                dependency: com.apple.iokit.IOHIDFamily(1.8.1)[FD2B6401-9BFA-32D5-ABEB-E523C061548D]@0xffff ff7f8d426000
                dependency: com.apple.iokit.IOAudioFamily(1.8.9fc11)[AB8DD2DD-43BD-3B7B-95F7-26E6E0BBF339]@ 0xffffff7f8d4ad000
                dependency: com.apple.iokit.IOFireWireFamily(4.5.5)[BFC15D10-EE0B-342D-9C00-8BF529DFAA6C]@0 xffffff7f8d4e7000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12D78
    Kernel version:
    Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
    Kernel slide:     0x000000000c400000
    Kernel text base: 0xffffff800c600000
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 1286109662632
    last loaded kext at 247210660249: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f8e947000, size 65536)
    last unloaded kext at 307389075113: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f8e947000, size 57344)
    loaded kexts:
    com.parallels.kext.prl_vnic          7.0 15107.796624
    com.parallels.kext.prl_netbridge          7.0 15107.796624
    com.parallels.kext.prl_hid_hook          7.0 15107.796624
    com.parallels.kext.prl_hypervisor          7.0 15107.796624
    com.parallels.kext.prl_usb_connect          7.0 15107.796624
    com.motu.driver.FireWireAudio          1.6 54199
    com.apple.driver.AppleBluetoothMultitouch          75.19
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
    com.apple.filesystems.ntfs          3.10
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHDA          2.3.7fc4
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.driver.Apple_iSight          4.0.1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.3.0
    com.apple.GeForce          8.1.0
    com.apple.driver.AppleUSBDisplays          357
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.iokit.CSRBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.iokit.SCSITaskUserClient          3.5.5
    com.apple.driver.XsanFilter          404
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.IOAHCIBlockStorage          2.3.1
    com.apple.driver.AppleAHCIPort          2.5.1
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.driver.AppleUSBHub          5.5.5
    com.apple.driver.AppleIntel8254XEthernet          3.1.1b1
    com.apple.driver.AppleUSBEHCI          5.5.0
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AppleUSBUHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.7
    com.apple.driver.AppleACPIButtons          1.7
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.7
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
    com.apple.driver.AppleMultitouchDriver          235.29
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.3f3
    com.apple.driver.AppleHDAController          2.3.7fc4
    com.apple.iokit.IOHDAFamily          2.3.7fc4
    com.apple.driver.AppleSMBusController          1.0.11d0
    com.apple.driver.AppleGraphicsControl          3.3.0
    com.apple.driver.AppleUSBAudio          2.9.0f6
    com.apple.iokit.IOAudioFamily          1.8.9fc11
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.nvidia.nv50hal          8.1.0
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.3.0d51
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
    com.apple.NVDAResman          8.1.0
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.AppleUSBHIDKeyboard          170.2
    com.apple.driver.AppleHIDKeyboard          170.2
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.5.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IO80211Family          522.4
    com.apple.iokit.IOUSBUserClient          5.5.5
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          5.5.5
    com.apple.driver.AppleEFIRuntime          1.7
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.2
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.7
    com.apple.iokit.IOPCIFamily          2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacPro3,1, BootROM MP31.006C.B05, 4 processors, Quad-Core Intel Xeon, 2.8 GHz, 8 GB, SMC 1.25f4
    Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
    Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x05F7, 0x000000463732323842353245353830304600
    Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x05F7, 0x000000463732323842353245353830304600
    Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet 2, Ethernet, en1
    PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
    Serial ATA Device: M4-CT256M4SSD2, 256.06 GB
    Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
    Serial ATA Device: WDC WD20EARX-008FB0, 2 TB
    Serial ATA Device: ST3320820AS_P, 320.07 GB
    Parallel ATA Device: PIONEER DVD-RW  DVR-112D
    Parallel ATA Device: PIONEER DVD-RW  DVR-108
    USB Device: hub_device, apple_vendor_id, 0x911c, 0xfd500000 / 4
    USB Device: hub_device, 0x0409  (NEC Corporation), 0x0050, 0xfd510000 / 6
    USB Device: Samsung ML-2510 Series, 0x04e8  (Samsung Electronics Co., Ltd.), 0x327e, 0xfd513000 / 10
    USB Device: Logitech Camera, 0x046d  (Logitech Inc.), 0x08ce, 0xfd516000 / 9
    USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921c, 0xfd520000 / 5
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd400000 / 3
    USB Device: G500, 0x046d  (Logitech Inc.), 0xc068, 0xfd410000 / 8
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd420000 / 7
    USB Device: Audio Express, 0x07fd, 0x0002, 0xfd300000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
    FireWire Device: built-in_hub, 800mbit_speed
    FireWire Device: iSight, Apple Computer, Inc., 200mbit_speed
    FireWire Device: unknown_device, unknown_speed

    Do you have TRIM Enabler? what SSD? how much free space? Have you ever done a secure erase and restore on the SSD? When you repair, are you booting from ML Recovery or from a full working system, a clone of your current system?
    You might want a small 100GB volume somewhere with another clean install of ML 10.8.3 and with TRIM Enabler - I use my TimeMachine drive which has 800GB free. Also a 60GB sparse disk image of the SSD.
    Putting your SSD on a PCIe 6G controller can help, though some have been known to cause corruption.
    Repairing only touches the directory so it doesn't tell you if the entire file structure is okay.
    A Safe Boot after repair is a good idea to do, then restart again.
    How much faith do you have in the 8800GT? think it is time to replace and upgrade to a newer card, from Apple ATI 5770 or higher end AMD 7950 Mac Edition even.
    Do you monitor system temps with something? how old are those FBDIMMs? Are they running 65* or less?
    You should really have a clone and do a restore every 3 months or so. No need for TimeMachine method. Takes under an hour. And of course all your data is not on the SSD (well, the home library should which is  ~/Library where all mail and web and prefs are stored. But all data is not on SSD at all.
    Cloning system and using TRIM
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
    Before you clone, install TRIM Enabler!
    And after you clone, run Disk Utility's REPAIR DISK on the SSD -- just to be on the safest side. http://www.macupdate.com/app/mac/37852/trim-enabler
    SSD Maintenance
    https://discussions.apple.com/thread/5012276
    ..Step by Step to fix your Mac
    https://discussions.apple.com/docs/DOC-3353
    No reason or need for a Mini. Unless you want. Should be fine, though the 3,1's have been the most tempermental with Mountain Lion up until 10.8.3. And you might regret moving to mini if a new Mac Pro were to come out.

  • IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

    IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately.  IMEI 013311005943507. Help please! the official service Moscow  representation FDA ipad offer to send in the U.S. for $ 500!

    Hello this is happening to us also (minus the Bluetooth speaker).  We can't figure out what is causing the data usage.  I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started.  Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours.  My husband called Verizon  and got the usual doubting Thomas response.  I understand that they don't know my device settings.  So over the phone we check all the settings and turned  off every possible culprit eating up the data and end the call.  By now I have purchased another gig for the month!  Assured we are NOT using mobile data, we continue on the IE path to bliss.  HA!  A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data.  After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card.  This has stopped the data usage, but it defeats the purpose of having the data plan.  I could have just stuck with my Surface.  Verizon sent us a new sim card.  Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot.   I am surprised at the number of complaints about this device.  When we called the Verizon support acted as though this was the first time they had heard about this.   Loved your post, you should write for a living.

  • Constantly Rebooting every few mins

    Hey, my device is constantly rebooting every few mins.
    I bought it from ebay classed as 'spares or repairs', and the post stated that it was not receiving signal and stays on "searching...". no big deal as i only wanted it for a cheap ipod for my younger brother.
    is there any way i can stop it from doing this rebooting thingy? i've tried the method of turning on 3g then restarting the phone then inputting a sim but that hasn't fixed it :/
    any and all help is much appericated

    This kind of crash is usually or always caused by a memory fault. If you've upgraded the memory modules, reinstall the original ones and see whether there's an improvement.
    Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable.
    You can try reinstalling the OS, but most likely there will be no change.
    Otherwise, make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the crash, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.

  • Since installing Firefox 29, my router constantly reboots on its own

    Since installing Firefox 29, my router constantly reboots on its own. Is anyone else having this problem? And could it indeed be caused by Firefox?

    Do you have any security software that may undo changes and restore a previous setup?

  • Settings reset after reboot of device

    Well, I found out today that when I reboot my device the normal way (volume down and sleep/wake), my device totally reverts it's settings. This is includes music settings, to my wallpaper, to accessibility.
    What's interesting is it's stuck on my settings I had prior to the 1.1 update..so it has sound check on, the zen sand wallpaper I chose, the equalizer I chose, everything.
    Anyone else get this or is this another bug?

    You would have to drag them back onto the nano from your library. If you have tracks you got from other libraries, you would have to get access to those libraries again to drag them over.
    i

  • Intel-based PC constantly rebooting after Service Pack 3 install

    I know many of people were having this problem, but since my PC doesn't have an AMD processor, I'm not sure what to do.
    My PC is an HP Pavilion with an Intel Pentium 4 3.0 GHz. I don't exactly know the model number and since I'm away from home I can't look at it right now.
    I installed Service Pack 3 the other day and I'm getting the common error where the computer is constantly rebooting. I'm hesitant to do what the following link suggests since it seems to be only applicable to AMD computers:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01457284
    I can't boot in Safe Mode nor the last known working configuration. I don't have the recovery disks and I don't have a copy of XP for reformatting either. I figure my answer is in the Recovery Console?
    Since I can't post from home this'll be a slow process. What should I do? Thank for reading!

    Try altering the Windows registry key as follows. Once it is completed then once again begin installation of SP3:
    1. Click Start - Run - Type “regedit” and press enter.
    2. Navigate to
    HKEYLOCALMACHINE
    \Software
    \Microsoft
    \Windows
    \CurrentVersion
    \Setup
    3. In the right pane, Right-click and select New - String value
    4. Name it as “BootDir” and set its value to “C:\”
    This should help. Try installing SP3 and should work fine.
    Axel F.

  • Galaxy s5 constantly rebooting

    My phone started to constantly reboot today, it goes on and then off constantly. Can't access anything or use it. I didn't install anything b/f it happened.  I've tried taking the battery out, multiple times, but that's not working.
    HELP?
    Is something wrong with the power button?

        Jdeep, hearting that you are having this issue wit your S5 is concerning. We will work with you to get this issue resolved. Are you able to use the phone to a certain point before it starts rebooting? When was the last time you updated the software on your phone?
    CandiceH_VZW
    Follow us on Twitter at @VZWSupport

  • Macbook Air constantly rebooting after installing Mavericks... this was my fix

    Just in case this helps anyone.
    I installed Mavericks on my Mac without an issue. When it restarted, my Mac would constantly reboot after a few minutes. It didn't matter if I logged in or not. I tried the various things that have been suggested (reset NVRAM, CMOS, running a disk check) but nothing help. If I booted into safe mode, I would not have any problems.
    The issue ended up being some systems extensions in my /System/Library/Extensions folder. I had installed and deleted Trend Micro Smart Surfing a while ago by using the manual uninstall (move the application to the trash) which leaves the system extensions it had added intact (there was a Trend Micro folder in /System/Library/Extensions).
    I reinstalled the software and then used the uninstaller that came with the program and after I rebooted, everything worked fine. I checked the /System/Library/Extensions folder and could see that the Trend Micro folder had been removed by the uninstaller.
    I would suggest looking at the /System/Library/Extensions folder and comparing to what is in the applications folder. If you something in the extensions folder but not in the application one, you might be having the same type of issue that I was having.
    Alex

    Startup your Mac while holding down the Command + R keys so you can access the built in utilities to repair the startup disk and restore OS X using OS X Recovery.

  • My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

    Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
    iOS: Not responding or does not turn on - Apple Support

  • Just upgraded to 2.1 and phone is constantly rebooting

    Hi all,
    I just updated to 2.1 and my phone is constantly rebooting (8 times in the last 5 minutes). Is this just me, or is anyone else seeing this?
    I am currently in a building with very poor phone service, so that may be related (it just reboot for the 9th time).
    Kirk

    my phone is doing this as well...frustrating...

  • I have a iPad air how do I restart or reboot the device please

    I have an iPad air how do I restart or reboot the device please?

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. 
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Blackberry constantly rebooting/restarting

    Hey!
    Was just wondering if anyone could help me!
    I have the Blackberry Curve 8520, and it constantly reboots/restarts. I've had my phone just over six months.
    I went into an Orange store last weekend and was told if I updated the software, this would sort it, but unfortunatly it hasn't.
    Thank-you in advance!

    Thank you for your post.
    I am in Ontario, Canada.
    I found a solution.
    I turned off receiving notification of a new voicemail, via voicemail settings when I call voicemail. Then I allowed the battery to fully drain.  I recharged the battery and restarted the phone.
    It works perfectly now. Yahoo!!  I still see a message that I missed a call, so I know to check my voicemail.

  • Reboot all devices

    Not sure if this is the correct forum but is there any way to send the reboot command to selected devices within ZLM 7.3. It would be nice if I could select 5 or 100 devices and under Action select reboot. I see where you can issue a reboot command once you select the device but I have a few hundred devices I want to reboot. Am I missing something or is there a way to reboot several devices at a time.

    Originally Posted by D8TA
    Not sure if this is the correct forum but is there any way to send the reboot command to selected devices within ZLM 7.3. It would be nice if I could select 5 or 100 devices and under Action select reboot. I see where you can issue a reboot command once you select the device but I have a few hundred devices I want to reboot. Am I missing something or is there a way to reboot several devices at a time.
    The easiest way would be to use a remote execution policy that issues the reboot command. Create a group that contains the servers you want to reboot, then assign the policy to start say, 2 minutes after refresh and assign it to the group you want to reboot. Then select the group and select Action->Refresh if you want the servers to reboot now-ish. Or, if you want to assign a day/time for the servers to reboot, you can do that as well

  • IBook G4 constantly rebooting

    My iBook G4 is constantly rebooting from start up but not booting as far as a login window.
    From the grey screen with the apple and 'wait' icons, the screen goes black and then reboots again...and goes black and reboots again. And so on....
    I've now taken the battery out to avoid a fire hazard.
    Steps taken:
    *PRAM reset
    *Reset the Power Management Unit
    *iBook Hardware Test (all OK)
    *boot from start up disk - only takes me OSX installation
    *Disk Doctor - Ran repairs and verifications successfully
    Is it dead?

    When you booted the computer from the OSX installer disc,
    did you use the options in the menubar to run Disk Utility?
    You can try to repair disk from there, and then restart.
    Also, you may be able to attempt an Erase and Install
    or an Archive and Install. If the contents of the hard disk
    drive are corrupted, an all new system on a completely
    wiped hard drive (HDD) may be an answer. Using the
    Disk Utility in the OSX installer, you should also be
    able to see if the SMART status of the HDD is OK.
    There could be a corruption on the startup sequence
    in the hard disk drive, or the drive itself may be defective.
    Other things could be defective, but troubleshooting and
    hoping to narrow the field one step at a time is helpful.
    You can also use the booted installer's Disk Utility and
    choose an option to write zeros or low-level format the
    hard disk drive; then format it in HFS+, and install anew.

Maybe you are looking for

  • Cannot add accounts to calendar

    Hello I had a problem with an exchange calendar and an online "fix"was to delete the library/calendar cache files - which I did. This caused issues and I tried to restore my calendar via Time Machine with no luck, so in the end I completely deleted m

  • How to set an image as a background in pages '09

    I'm trying to set an image as a background in pages... PLEASE HELP!!

  • Get Windows domain name and user through jsp

    I have a jsp page that will be viewed through ie on windows platform, that is a member of domain. I need to get the domain name and logged in windows user name to use it in my page. I've looked through similar topics. Found no answer. 1. System.param

  • HT201089 No ask to buy option

    No ask to buy option. I set up my son and he is automatically an adult. A calendar I had previously created called family has been shared with him. I can't remove the calendar, unshare it or delete it. Tried removing him from family share and re-addi

  • Reading an image for the particular EMP from disk...

    Well in my EMP form i have to now include an image of the EMP ...i.e when empno is enter all the info along with the image should be displayed at the run time.... All images are stored in C:\Emp\photos in jpg format.. How should i execute this thing.