Constly get sync error message this sync failed to start cannot up date or change music or apps
I have iphone 4, cannot syn in itunes for windows ver 11.1.3.8; get error message the iphone could not be synced because the sync session failed to start, I have uninstalled and reinstalled itunes, the ios is 7.0.4 is current on phone HELP please ???
Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.
Similar Messages
-
Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue
Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
I'm trying to install on windows 7 and am getting the error message 'mobile device failed to start
I'm trying to install iTunes on my computer and I'm getting an error message 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system service
Hey Syracuse8769!
Here is an article that can help you troubleshoot this issue and will instruct you about restarting the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
HT1386 I am getting an error message that syncing failed to start. Any ideas why?
I am getting an error message that syncing failed to start. Any ideas why. The ipad is working fine.
Then I tried to download and install them again but it kept saying the old itunes could not be removed.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
I get an error message that sync failed to start
When I try to sync my Ipod Touch it shows that it is waiting to sync but then I get an error message that sync failed to start. I have tried restore and re starting my computer but I still get the same message, what is going on and how do I fix it? Please help!
Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753) -
when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD -
We use Adobe Acrobat 10. When I try to download the most recent update, I get the error message 1608 download failed. How do I fix this?
uninstall acrobat, clean (if windows os), Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs and then reinstall.
-
I have a tried to format my seagate free agent 1TB external hard drive so I can use it, but I keep getting an error message saying it failed. Can n e 1 help me plz
This article has a link for more information on finding your profile directory: [[Fix the "Could not initialize the application's security component" error message]]. On Windows 7, you can try this (either in a Windows Explorer window address bar or from the start menu search box):
%APPDATA%\Mozilla\Firefox\Profiles
You may see one folder in there and that's the one you want. If you see more than one, look for the one with the most recently modified files. -
For many weeks now, my iTunes has failed to update. I download the updates and they go through the installation process, but then I get an error message that they failed to install. How can I update?
Wild guess but if your WinXP system has formatted your drive(s) as FAT32 then the maximum file size is 4GB. Could be that the download in 1080p is >4GB? (if formatted NTFS then this should not be a problem).
Again just a guess with iTunes on WinXP but something easy to check first. -
I begin to download but I get the error message :|"Application Manager failed to install"
I begin to download but I get the error message :|"Application Manager failed to install"
Hi Gerald,
Welcome to the Community!
Please go through this thread http://forums.adobe.com/message/5428322, it has the initial step and then other steps if that doesn't resolve.
Thanks!
Ankit -
I get an error message "WebGet request failed" when I try to download Adobe Acrobat every time
I have tried to download Acrobat Pro 6 times, and continue to get an error message, "WebGet Request Failed". I need to get this downloaded. Is there a way to make it work??
Download onto what system using what means? This is an hopelessly outdated version that is/ may simply not be compatible with modern operating systems...
Mylenium
Maybe you are looking for
-
Can anyone verrify if the western digital raptor will work on my computer?
I need a new hard drive and I wanted to know if the western digital raptor works well in a dual 2.7GHz power pc g5. here is a link to the hard drive http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=23686 32&CatId=0 Thanks so
-
How do I find the file name of the current desktop picture?
I've tried going to System Prefs, right-clicking on the desktop, and rifling through the pictures folder to visually match the picture. Isn't there an easy way to find out what the name of the current desktop picture file?
-
Flex Builder 3 forgets valid serial number, constant prompt
Hi all, I installed Flex Builder 3 on a Windows XP 32 bit machine under one user account. It came up and worked great for several days. Later on, I made another user account and tried to use Flex Builder 3. Each time it starts up it says my trial per
-
Need external antenna connector for old Nokia 5110...
Hi all, this is a long shot I admit, but doesn anyone know what type of connector (and where to purchase) was used on the old 5110/6110 Nokia phones, it is the external connector located on the rear behind the rubber grommit use for the car kits... I
-
I can't connect to my G4 server after update to 10.4.5
Impossible to get my g4 from my power book, no more connection works : ftp, wired server or carracho server. DDNS address doesn't works, nor IP one. There's just the internal linksys router IP address (192.168.1.100) that works. Somebody can help me