Constraint Violation During Replication Causing In-Doubt

I keep getting a lot of In-Doubt transaction when a constraint is violated any one had this problem.
Using 10gr2 RAC
DISTRIB TRAN HOUDB.GRANTPRIDECO.CC.5c25b283.23.10.37105
is local tran 23.10.37105 (hex=17.0a.90f1)
change pending prepared tran, scn=1619261224 (hex=0.6083f728)
to pending forced commit tran, scn= (hex=0.00000000)
Thu Feb 2 14:42:42 2006
Error 2091 trapped in 2PC on transaction 27.32.28016. Cleaning up.
Thu Feb 2 14:42:42 2006
DISTRIB TRAN HOUDB.GRANTPRIDECO.CC.5c25b283.27.32.28016
is local tran 27.32.28016 (hex=1b.20.6d70)
insert pending prepared tran, scn=1619273067 (hex=0.6084256b)
Thu Feb 2 14:42:42 2006
Error stack returned to user:
ORA-02054: transaction 27.32.28016 in-doubt
ORA-02091: transaction rolled back
ORA-02291: integrity constraint (BITTRK25.RN_B_FK) violated - parent key not found
ORA-02063: preceding 2 lines from SThu Feb 2 14:54:23 2006

Similar Messages

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. : Error: An Active Directory Constraint Violation error occurred

Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R Dash

Hi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Update pwdChangedTime via ldapmodify causes "Constraint violation"

Hi,
we're migrating an application from IBM products (WebSphere+Tivoli DS) to Sun produdcts (SJSAS 9.0+SJSDS 6.0). I need to be able to change an entry's pwdChangedTime using the ldapmodify command.
Running the following command
ldapmodify -D "cn=Directory Manager" -v -f /tmp/change_pwdChangedTime.txt
with the folloing /tmp/change_pwdChangedTime.txt file
dn: cn=abc,ou=people,o=aaa,c=bbb
changetype: modify
replace: pwdChangedTime
pwdChangedTime: 20070806082500Z
gives me the following output
ldap_init( localhost, 389 )
replace pwdChangedTime:
20070806082500Z
modifying entry cn=abc,ou=people,o=aaa,c=bbb
ldap_modify: Constraint violation
ldap_modify: additional info: Constraint violation in modifications
In Tivoli Directory Server I was able to use the command above using the "-k" option to be able to change the value of operational attributes like pwdChangedTime. Is there anywthing similar in SJSDS 6?
Is there any other way to update this attribute manually when required but still have the server updating it when the password is changed by the user?
Message was edited by:
mcari

We are trying to constrain applications from meddling with operational attributes due to the possibility of surprising behavior of the DSA as a result of an unanticipated value.
In a lab environment, I would think it would be acceptable to remove the "read-only" restriction. Edit <instance_root>/config/schema/00ds6pwp.ldif and remove the constraint.
We can consider adding a programmatic mechanism (e.g., an LDAP extended operation) in a future release to manage these operational attributes for testing and other administrative purposes. Could you let us know what other attributes you modify and to what ends?

JBO-28030 possible constraints violation for PS_TXN

Hi guys, any updates on this old thread from 2004?
Constraints violation for PS_TXN
Sometimes, i also receive this error Running WLS Cluster with 2 nodes:
oracle.jbo.PCollException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-28030
     at oracle.jbo.PCollException.throwException(PCollException.java:36)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1901)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:564)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:688)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:647)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:465)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:267)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5975)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5835)
     at oracle.adf.model.bc4j.DCJboDataControl.createSnapshot(DCJboDataControl.java:3143)
     at oracle.adf.model.dcframe.DataControlFrameImpl.createSnapshot(DataControlFrameImpl.java:879)
     at oracle.adf.model.BindingContext.createSnapshot(BindingContext.java:699)
     at oracle.adf.model.BindingContext.writeObject(BindingContext.java:666)
     at sun.reflect.GeneratedMethodAccessor726.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1469)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1400)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
     at weblogic.servlet.internal.session.ReplicatedSessionChange.writeExternal(ReplicatedSessionChange.java:153)
     at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1429)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1398)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
     at weblogic.rjvm.MsgAbbrevOutputStream.writeObject(MsgAbbrevOutputStream.java:618)
     at weblogic.rjvm.MsgAbbrevOutputStream.writeObjectWL(MsgAbbrevOutputStream.java:609)
     at weblogic.rmi.internal.ObjectIO.writeObject(ObjectIO.java:38)
     at weblogic.rjvm.BasicOutboundRequest.marshalArgs(BasicOutboundRequest.java:88)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:221)
     at weblogic.cluster.replication.ReplicationManager_1035_WLStub.update(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor675.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.cluster.replication.SecureReplicationInvocationHandler$ReplicationServicesInvocationAction.run(SecureReplicationInvocationHandler.java:194)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.cluster.replication.SecureReplicationInvocationHandler.invoke(SecureReplicationInvocationHandler.java:164)
     at $Proxy135.update(Unknown Source)
     at weblogic.cluster.replication.ReplicationManager.sendUpdateRequestToSecondary(ReplicationManager.java:740)
     at weblogic.cluster.replication.ReplicationManager.updateSecondary(ReplicationManager.java:662)
     at weblogic.servlet.internal.session.ReplicatedSessionData.syncSession(ReplicatedSessionData.java:639)
     at weblogic.servlet.internal.session.ReplicatedSessionContext.sync(ReplicatedSessionContext.java:85)
     at weblogic.servlet.internal.ServletRequestImpl$SessionHelper.syncSession(ServletRequestImpl.java:2860)
     at weblogic.servlet.internal.ServletRequestImpl$SessionHelper.syncSession(ServletRequestImpl.java:2835)
     at weblogic.servlet.internal.ServletResponseImpl$1.run(ServletResponseImpl.java:1485)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1479)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1462)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (ADF_FMWK.PS_TXPLG_PK) violated
I'm using several passivation tables for different Application modules . PS_TXPLG acually have a PS_TXN table structure and PS_TXPLG_PK is equivalent to PS_TXN_PK .
Regards,
Krasimir

Hi guys, any updates on this old thread from 2004?
Constraints violation for PS_TXN
Sometimes, i also receive this error Running WLS Cluster with 2 nodes:
oracle.jbo.PCollException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-28030
     at oracle.jbo.PCollException.throwException(PCollException.java:36)
     at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1901)
     at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:564)
     at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:688)
     at oracle.jbo.pcoll.PCollNode.passivateBranch(PCollNode.java:647)
     at oracle.jbo.pcoll.PCollection.passivate(PCollection.java:465)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:267)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:5975)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5835)
     at oracle.adf.model.bc4j.DCJboDataControl.createSnapshot(DCJboDataControl.java:3143)
     at oracle.adf.model.dcframe.DataControlFrameImpl.createSnapshot(DataControlFrameImpl.java:879)
     at oracle.adf.model.BindingContext.createSnapshot(BindingContext.java:699)
     at oracle.adf.model.BindingContext.writeObject(BindingContext.java:666)
     at sun.reflect.GeneratedMethodAccessor726.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)
     at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1469)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1400)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
     at weblogic.servlet.internal.session.ReplicatedSessionChange.writeExternal(ReplicatedSessionChange.java:153)
     at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1429)
     at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1398)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:330)
     at weblogic.rjvm.MsgAbbrevOutputStream.writeObject(MsgAbbrevOutputStream.java:618)
     at weblogic.rjvm.MsgAbbrevOutputStream.writeObjectWL(MsgAbbrevOutputStream.java:609)
     at weblogic.rmi.internal.ObjectIO.writeObject(ObjectIO.java:38)
     at weblogic.rjvm.BasicOutboundRequest.marshalArgs(BasicOutboundRequest.java:88)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:221)
     at weblogic.cluster.replication.ReplicationManager_1035_WLStub.update(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor675.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.cluster.replication.SecureReplicationInvocationHandler$ReplicationServicesInvocationAction.run(SecureReplicationInvocationHandler.java:194)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.cluster.replication.SecureReplicationInvocationHandler.invoke(SecureReplicationInvocationHandler.java:164)
     at $Proxy135.update(Unknown Source)
     at weblogic.cluster.replication.ReplicationManager.sendUpdateRequestToSecondary(ReplicationManager.java:740)
     at weblogic.cluster.replication.ReplicationManager.updateSecondary(ReplicationManager.java:662)
     at weblogic.servlet.internal.session.ReplicatedSessionData.syncSession(ReplicatedSessionData.java:639)
     at weblogic.servlet.internal.session.ReplicatedSessionContext.sync(ReplicatedSessionContext.java:85)
     at weblogic.servlet.internal.ServletRequestImpl$SessionHelper.syncSession(ServletRequestImpl.java:2860)
     at weblogic.servlet.internal.ServletRequestImpl$SessionHelper.syncSession(ServletRequestImpl.java:2835)
     at weblogic.servlet.internal.ServletResponseImpl$1.run(ServletResponseImpl.java:1485)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1479)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1462)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (ADF_FMWK.PS_TXPLG_PK) violated
I'm using several passivation tables for different Application modules . PS_TXPLG acually have a PS_TXN table structure and PS_TXPLG_PK is equivalent to PS_TXN_PK .
Regards,
Krasimir

ORA-00001 Unique constraint Violation Error

We are upgrading our NW BW 7.01 java server to 7.3 and during the Downtime phase of the Installer, while running the Offline Migration, we are getting an error "EP-KM-BC: Unique Constraint Violation error: ORA-000001". Unknown Object# (12xxxxxx) does not exist. We have one CI and two DI. Any help would be greatly appreciated.

Hi Anil,
You need to clear the data from the table
1. SHD_AP_PROPVALUE
2. SHD_KMC_AP_PROP
3. SHD_AP_MC
Repeat the phase and also follow the sapnote
1873288 - RUN_OFFLINE_MIGRATION phase fails during SAP NetWeaver migration
Also paste the logs of RUN_OFFLINE_MIGRATION phase.
With Regards
Ashutosh Chaturvedi

How to debug and find the exact constraint violation error

{122712 14:22:36:ErrorCode -1 with ErrorMessage as ORA-00001: unique constraint (OPS$CMS.PK_TB_ML_EXER_UPLOAD) violated has occured for [SSO16063259009], [CMSCOST_USER] pk_xop_subsales.pr_process_exer }
{PROCEDURE pr_process_exer(
p_voucher_num           tb_xop_order_manager_t.voucher_num%TYPE,
p_status_type           tb_xop_order_manager_t.status_type%type,
p_dest                    tb_xop_order_manager_t.dest%type,
p_reference_key            tb_xop_order_manager_t.reference_key%type,
p_seq_num                tb_xop_order_manager_t.seq_num%type,
p_return_code            tb_xop_order_manager_t.return_code%type,
p_reason_desc           tb_xop_order_manager_t.reason_desc%type,
p_activity_qty            tb_xop_order_manager_t.activity_qty%type,
p_leaves_qty            tb_xop_order_manager_t.leaves_qty%type,
p_exec_price            tb_xop_order_manager_t.exec_price%type,
p_current_status        tb_xop_order_manager_t.current_status%type,
p_err_cur          OUT ref_cursor)
IS
CURSOR get_order_dtls(v_voucher_num tb_xop_order_manager_t.voucher_num%type)
IS
SELECT *
FROM   tb_xop_order_manager_t
WHERE voucher_num = v_voucher_num;
CURSOR get_mail_cd(v_opt_num OPTIONEE.opt_num%TYPE) IS
      SELECT mail_cd, sp_mail_cd
      FROM XOP_OPTIONEE
      WHERE opt_num = v_opt_num;
cursor get_opt_dtls(v_opt_num OPTIONEE.opt_num%TYPE) IS
select
SUBSTR(trim(O.name_first) || ' ' || trim(O.name_mi) || ' ' ||
          trim(O.name_last), 1, 35) p_name,
        SUBSTR(O.address1, 1, 35) opt_addr1,
          SUBSTR(O.address2, 1, 35) opt_addr2,
          SUBSTR(O.address3, 1, 35) opt_addr3,
          SUBSTR(O.address4, 1, 35) opt_addr4,
          SUBSTR(O.address5, 1, 35) opt_addr5,
          SUBSTR(O.address6, 1, 35) opt_addr6,
        SUBSTR(trim(O.city) || ' ' || trim(O.state) || ' ' ||
        trim(O.zip) || ' ' || trim(O.country), 1, 35) city_state_zip_country,
        trim(O.city) city,
        trim(O.state) state,
        trim(O.zip) zip,
        trim(O.country) country
from optionee o
where o.opt_num = v_opt_num;
--CQ:PCTUP00210726- Added wire instructions audit for deleted wire info.
CURSOR c_wire_instruction (
      in_wire_seq_no           TB_XOP_WIRE_INSTRUCTIONS.wire_seq_no%TYPE ) IS
      SELECT ml_brok_acct_num,
             ssn,
             plan_num,
             instr_type,
             aba_routing_num,
             swift_routing_code,
             bank_name,
             bank_acct_num,
             name_on_account,
             bank_addr_1,
             bank_addr_2,
             bank_addr_3,
             city,
             state,
             country,
             zip,
             bank_ident_num,
             addtl_info
        FROM TB_XOP_WIRE_INSTRUCTIONS
       WHERE wire_seq_no = in_wire_seq_no
       UNION
       SELECT ml_brok_acct_num,
             ssn,
             plan_num,
             instr_type,
             aba_routing_num,
             swift_routing_code,
             bank_name,
             bank_acct_num,
             name_on_account,
             bank_addr_1,
             bank_addr_2,
             bank_addr_3,
             city,
             state,
             country,
             zip,
             bank_ident_num,
             addtl_info
        FROM TB_XOP_WIRE_INSTRUCTIONS_AUDIT
       WHERE wire_seq_no = in_wire_seq_no;
CURSOR c_order_qty IS
SELECT order_qty
FROM tb_xop_order_manager
WHERE voucher_num = p_voucher_num;
v_order_qty     tb_xop_order_manager.order_qty%TYPE;
v_wire_instruction             c_wire_instruction%ROWTYPE;
v_order_dtls      get_order_dtls%rowtype;
v_opt_dtls        get_opt_dtls%rowtype;
v_settle_dt       tb_ml_exer_upload.settle_dt%type;
v_cusip_num       corp.cusip_num%type;
v_err_cd          number(12):=0;
v_err_msg         varchar2(4000);
v_compy_nme       tb_fc_Compy.compy_nme%type;
v_ml_sec_num      tb_fc_compy.ml_sec_num%type;
v_mail_cd         xop_optionee.mail_cd%type;
v_count1            PLS_INTEGER := 0;
v_sum_activity_qty tb_xop_order_manager_t.activity_qty%TYPE;
v_transact_no       PLS_INTEGER;
v_ivr_plan_num      tb_fc_compy.ivr_plan_num%TYPE;
wait_for_more       EXCEPTION;
exceeds_order_qty   EXCEPTION;
--Added for CQ# PCTUP00481233
v_sub_totfee number;
v_sub_fixedfee1 number;
v_sub_fixedfee2 number;
v_sub_fixedfee3 number;
v_sub_secfee number;
v_sub_feenum number;
--Added for CQ# PCTUP00481233
v_fixedfee1 tb_xop_order_manager_t.fixed_fee1%TYPE; --SPIF# 43161- variable to hold fixed fee1
BEGIN
    OPEN c_order_qty;
    FETCH c_order_qty INTO v_order_qty;
    CLOSE c_order_qty;
    dbms.output.put_line('completed1');
    IF v_order_qty <> p_activity_qty THEN
      dbms.output.put_line('completed2');
        IF p_status_type = 'EO' AND v_order_qty < p_activity_qty THEN
            RAISE exceeds_order_qty;
              dbms.output.put_line('completed3');
        ELSIF p_status_type = 'EO' AND v_order_qty > p_activity_qty THEN
            -- Partial Execution
            INSERT INTO tb_xop_hold_multi_orders
                ( voucher_num
                , reference_key
                , seq_num
                , return_code
                , reason_desc
                , status_type
                , activity_qty
                , leaves_qty
                , exec_price
                , current_status
                , waiting
                ,activ_dt )
            VALUES
                ( p_voucher_num
                , p_reference_key
                , p_seq_num
                , p_return_code
                , p_reason_desc
                , p_status_type
                , p_activity_qty
                , p_leaves_qty
                , p_exec_price
                , p_current_status
                , 'Y'
                ,SYSTIMESTAMP );
                  dbms.output.put_line('completed4');
        ELSE
            IF p_status_type = 'BE' THEN
                SELECT COUNT(1) INTO v_count1
                FROM tb_xop_hold_multi_orders
                WHERE voucher_num = p_voucher_num;
                  dbms.output.put_line('completed5');
                IF v_count1 > 0 THEN
                    INSERT INTO tb_xop_hold_multi_orders
                        ( voucher_num
                        , reference_key
                        , seq_num
                        , return_code
                        , reason_desc
                        , status_type
                        , activity_qty
                        , leaves_qty
                        , exec_price
                        , current_status
                        , waiting
                        ,activ_dt)
                    VALUES
                        ( p_voucher_num
                        , p_reference_key
                        , p_seq_num
                        , p_return_code
                        , p_reason_desc
                        , p_status_type
                        , (-1) * p_activity_qty
                        , p_leaves_qty
                        , p_exec_price
                        , p_current_status
                        , 'Y'
                        ,SYSTIMESTAMP );
                    UPDATE tb_xop_hold_multi_orders
                    SET waiting = 'Y'
                    WHERE voucher_num = p_voucher_num;
                      dbms.output.put_line('completed6');
                END IF;
            END IF;
        END IF;
          dbms.output.put_line('completed7');
        SELECT SUM(NVL(activity_qty,0)) INTO v_sum_activity_qty
        FROM tb_xop_hold_multi_orders
        WHERE waiting = 'Y'
        AND voucher_num = p_voucher_num;
        IF v_sum_activity_qty > 0 THEN
            IF v_sum_activity_qty <> v_order_qty THEN
                RAISE wait_for_more;
            ELSE
                -- final order in the partial execution; complete the process
                UPDATE tb_xop_hold_multi_orders
                SET waiting = 'N'
                    , process_dt = SYSDATE
                WHERE voucher_num = p_voucher_num;
            END IF;
        END IF;
    END IF;
    UPDATE tb_xop_order_manager_t
    SET activ_dt = TO_CHAR( SYSDATE, 'YYYY-MM-DD HH24:MI:SS' ) || '.000'
        , dest = p_dest
        , reference_key = p_reference_key
        , seq_num = p_seq_num
        , return_code = p_return_code
        , reason_desc = p_reason_desc
        , status_type = p_status_type
        , activity_qty = v_order_qty --p_activity_qty
        , leaves_qty = 0 --p_leaves_qty
        , exec_price = p_exec_price
    WHERE voucher_num = p_voucher_num;
    dbms.output.put_line('completed8');
     * SPIF# 43161- Update of current status to PO moved at the end, same as how PROD works.
IF (p_status_type = 'EO') THEN
BEGIN
    select cusip_num
      into   v_cusip_num
      from   corp;
EXCEPTION
      WHEN NO_DATA_FOUND THEN
          SELECT cusip_num
            INTO v_cusip_num
            FROM tb_xop_espp_compy
           WHERE compy_acronym = replace(replace(user,'CMS'),'_USER');
      WHEN OTHERS THEN
          NULL;
END;
   select compy_nme,ml_sec_num, ivr_plan_num
   into   v_compy_nme,v_ml_sec_num, v_ivr_plan_num
   from   tb_fc_compy
   where compy_acronym = replace(replace(user,'CMS'),'_USER')
   UNION ALL
   select compy_nme, je_ml_security_number, ivr_plan_num
   from tb_xop_espp_compy
   where compy_acronym = replace(replace(user,'CMS'),'_USER');
--   where ivr_plan_num = replace(substr(p_voucher_num,1,7),'SSO','XOP');
open get_order_dtls(p_voucher_num);
FETCH get_order_dtls INTO v_order_dtls;
   v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_order_dtls.exer_date + 1));
   v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_settle_dt + 1));
   v_settle_dt := fn_xop_bankopen_bizday(TRUNC(v_settle_dt + 1));
   FOR c_mail_cd IN get_mail_cd(v_order_dtls.opt_num)
   LOOP
     v_mail_cd := c_mail_cd.mail_cd;
     -- Do we need to get sp_mail_cd and overlay with the sp_mail_cd in order_manager_t???
   END LOOP;
   OPEN get_opt_dtls(v_order_dtls.opt_num);
   FETCH get_opt_dtls INTO v_opt_dtls;
   CLOSE get_opt_dtls;
v_fixedfee1 := nvl(v_order_dtls.fixed_fee1, 0);
   * SPIF# 43161- atleast one handling fee per day of transaction
v_fixedfee1 := pk_xop_enh_exerupdate.chrg_tranxfixed_fee(v_fixedfee1,
                                                           v_order_dtls.symbol,
                                                           v_order_dtls.corp_acronym,
                                                           v_order_dtls.opt_num);
--Insert into tb_ml_exer_upload
--Added for CQ# PCTUP00481233
   Pk_Xop_Transactmodel.GET_FEE(v_order_dtls.GROUP_ID,v_order_dtls.SVC_ID,'SQ',v_order_dtls.opts_exer,
                                round(v_order_dtls.exec_price, 4),v_sub_totfee,v_sub_fixedfee2,v_sub_fixedfee1,
                                v_sub_fixedfee3,v_sub_secfee,v_sub_feenum,lpad(v_order_dtls.ssn,9,0));
   v_order_dtls.sec_fee:=v_sub_secfee;
   UPDATE tb_xop_order_manager_t
    SET sec_fee=v_sub_secfee
    WHERE voucher_num = p_voucher_num;
    dbms.output.put_line('completed8');
--- End CQ # PCTUP00481233
INSERT INTO tb_ml_exer_upload
                        (exer_num,exer_seq,
                         exer_dt, written_flag, backout_flag, output_line,
                         je_flag, opts_exer,
                         tot_tax,shrs_sold,comm_value,tot_fee,
                         mkt_prc,exer_type, soc_sec,
                         name_first, name_mi,
                         name_last,check_addr_1,check_addr_2,check_addr_3,
                         check_addr_4,check_addr_5,city,state,zip,country,
                         city_state_zip_country,
                         p_name,opt_addr1,opt_addr2,opt_addr3,opt_addr4,
                         opt_addr5,opt_addr6,
                         settle_dt,send_to_citibank_flag,
                         dom_chek_distr,foreign_currency_code,
                         distribution_method,wire_seq_no,
                         cusip_num, ml_retail_account,multi_curr_handling_fee,
                         ml_sec_num, corp_name,upd_optionee_addr,
                         outbound_flag, -- make it N
                         corp_symbol,taxwire_approve, -- make it not applicaplabe
                         exersource,
                         mail_cd, sp_mail_cd,
                         backup_withholding,
                         user_id,
                         acct_num_othr)
   VALUES(v_order_dtls.exer_num,0,v_order_dtls.exer_date,'N','N',NULL,
-- PG 12/12/05 Changed to populate the je_flag based on dom_chek_distr         'D',
-- PG 12/16/05 JE should not be generated for international checks.. So 'Y' always
          'Y', --je_flag
          v_order_dtls.opts_exer,0,--total tax will be 0.
          v_order_dtls.opts_exer, --shrs_sold,
          v_order_dtls.comm_value,
          --SPIF# 43161- replaced nvl(v_order_dtls.fixed_fee1, 0) with v_fixedfee1
          v_fixedfee1 + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0), --v_order_dtls.fees_amt,
          round(v_order_dtls.exec_price, 4),v_order_dtls.exer_type,
          LPAD(v_order_dtls.ssn,9,'0'), --v_order_dtls.ssn, Modified by Suresh on 02/08/07 for SPIF # 37210
          v_order_dtls.name_first,v_order_dtls.name_mi,v_order_dtls.name_last,
          v_order_dtls.check_addr_1,v_order_dtls.check_addr_2,v_order_dtls.check_addr_3,
          v_order_dtls.check_addr_4,v_order_dtls.check_addr_5,nvl(v_order_dtls.city,v_opt_dtls.city),
          nvl(v_order_dtls.state,v_opt_dtls.state),nvl(v_order_dtls.zip,v_opt_dtls.zip),
          nvl(v_order_dtls.country,v_opt_dtls.country),
          SUBSTR(nvl(v_order_dtls.city||v_order_dtls.state||v_order_dtls.zip||v_order_dtls.country,
              v_opt_dtls.city_state_zip_country),1,34), -- COLUMN LENGTH MAX IS 35
          v_opt_dtls.p_name,v_opt_dtls.opt_addr1,v_opt_dtls.opt_addr2,v_opt_dtls.opt_addr3,
          v_opt_dtls.opt_addr4,v_opt_dtls.opt_addr5,v_opt_dtls.opt_addr6,
          v_settle_dt,decode(v_order_dtls.distribution_method,'W','Y','D','Y','C','Y','D'),
          v_order_dtls.dom_chek_distr,v_order_dtls.foreign_currency_code,
          v_order_dtls.distribution_method,v_order_dtls.wire_seq_no,
          v_cusip_num,v_order_dtls.acct_num,v_order_dtls.multi_curr_handling_fee,
--          nvl(fn_get_sec_num(replace(substr(p_voucher_num,1,7),'SSO','XOP'),v_order_dtls.symbol),v_ml_sec_num),
          nvl(fn_get_sec_num(v_ivr_plan_num, v_order_dtls.symbol),v_ml_sec_num),
          v_compy_nme,v_order_dtls.upd_optionee_addr,
          'N', --'N' is for outbound flag.
          v_order_dtls.symbol,'D', --'D' for taxwires disabled
          'S', -- 'S' for source being subsequent sale.
          v_mail_cd, --need to get mail_Cd??
          v_order_dtls.sp_mail_cd,v_order_dtls.backup_withholding,
          user,v_order_dtls.acct_num_othr);
IF (NVL(v_order_dtls.wire_seq_no,0) > 0) THEN
   OPEN c_wire_instruction(v_order_dtls.wire_seq_no);
   FETCH c_wire_instruction INTO v_wire_instruction;
   CLOSE c_wire_instruction;
INSERT INTO TB_XOP_TRANSACT_WIRE_INSTR
                       (user_id, exer_num, wire_seq_no, ml_brok_acct_num, ssn,
                        plan_num, instr_type, aba_routing_num,
                        swift_routing_code, bank_name, bank_acct_num,
                        name_on_account, bank_addr_1, bank_addr_2, bank_addr_3,
                        city, state, country, zip, bank_ident_num, addtl_info )
                    VALUES
                       (USER,v_order_dtls.exer_num, v_order_dtls.wire_seq_no,
                        v_wire_instruction.ml_brok_acct_num, v_wire_instruction.ssn,
                        v_wire_instruction.plan_num, v_wire_instruction.instr_type, v_wire_instruction.aba_routing_num,
                        v_wire_instruction.swift_routing_code, v_wire_instruction.bank_name, v_wire_instruction.bank_acct_num,
                        v_wire_instruction.name_on_account, v_wire_instruction.bank_addr_1, v_wire_instruction.bank_addr_2,
                        v_wire_instruction.bank_addr_3, v_wire_instruction.city, v_wire_instruction.state, v_wire_instruction.country, v_wire_instruction.zip,
                         v_wire_instruction.bank_ident_num, v_wire_instruction.addtl_info);
        dbms.output.put_line('completed10');
END IF;
/* PG 01/05/06 Call the check conversion only for international checks and wires */
IF v_order_dtls.dom_chek_distr = 'N' AND v_order_dtls.distribution_method IN ('W', 'D', 'C') THEN
    /* PG 12/20/05 To process subsequent sales with wire or foreign currency distribution */
     v_transact_no := 88;
     pk_xop_citibank_forex.pr_cashconversion_ins_request( v_order_dtls.acct_num
                                                          , LPAD(v_order_dtls.ssn,9,'0') --v_order_dtls.ssn, Modified by Suresh on 02/15/07 for SPIF # 37210
                                                          , v_order_dtls.distribution_method
                                                          , v_order_dtls.foreign_currency_code
                                                          , v_order_dtls.wire_seq_no
                                                          , ROUND((v_order_dtls.opts_exer * round(v_order_dtls.exec_price, 4)),2)
                                                            - ROUND(v_order_dtls.comm_value,2)
                                                            - ROUND(nvl(v_order_dtls.fixed_fee1,0) + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0),2)
                                                            - nvl(v_order_dtls.multi_curr_handling_fee,0)
                                                            - nvl(v_order_dtls.backup_withholding,0) -- net proceeds
                                                          , v_order_dtls.multi_curr_handling_fee --handling fee
                --Modified by Bhaskar/Suresh on 03/02/2006    --, v_order_dtls.login_name
                                                          , CASE v_order_dtls.login_name WHEN 'CLIENT/' THEN v_order_dtls.login_name||'SSO' ELSE v_order_dtls.login_name||'/SSO' END
                                                          , v_transact_no -- transact_no as place holder for exer_type 88
                                                          , v_order_dtls.check_addr_1
                                                          , v_order_dtls.check_addr_2
                                                          , v_order_dtls.check_addr_3
                                                          , v_order_dtls.check_addr_4
                                                          , v_order_dtls.upd_optionee_addr
                                                          , v_order_dtls.city
                                                          , v_order_dtls.state
                                                          , v_order_dtls.zip
                                                          , v_order_dtls.country
                                                          , v_order_dtls.login_ipaddress
                                                          , v_order_dtls.fcnum
                                                          , v_order_dtls.opt_num
                                                          , v_settle_dt,
                                                          p_exer_num => v_order_dtls.exer_num
END IF;
COMMIT;
close get_order_dtls;
END IF;
* SPIF# 43161- Update to current status into PO is moved to this part, same as PROD.
UPDATE tb_xop_order_manager_t
SET exec_dttime = decode(p_status_type,'EO',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),null)
     , exer_date = TRUNC(SYSDATE)
     , cancel_dttime = decode(p_status_type,'CX',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),'UR',to_char(sysdate,'DD-MON-YYYY HH24:mi:ss'),null)
     , current_status = 'PO'
     , sum_status = decode(p_status_type,'EO','X','C')
     , sum_stat_dttime = SYSDATE
WHERE voucher_num = p_voucher_num;
      v_err_cd := sqlcode;
      v_err_msg := sqlerrm;
      open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
EXCEPTION
        dbms.output.put_line('completed200');
/* PG 02/10 handled 'partial fill order' exception */
when wait_for_more then
      v_err_cd := 0;
      v_err_msg := 'ORA-0000: normal, successful completion';
      pr_xop_log_errors('Partially filled; Waiting for more - Activity qty:' || to_char(v_sum_activity_qty)|| ' pk_xop_subsales.pr_process_exer');
      open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
when exceeds_order_qty then
      v_err_cd := sqlcode;
      v_err_msg := sqlerrm;
      open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
      pr_xop_log_errors('Activity quantity exceeded the Order_qty - Activity qty: ' || to_char(p_activity_qty) || ' pk_xop_subsales.pr_process_exer');
when others then
      v_err_cd := sqlcode;
      v_err_msg := sqlerrm;
      open p_err_cur for select v_err_cd err_code,v_err_msg err_msg from dual;
      pr_xop_log_errors('ErrorCode '||SQLCODE||' with ErrorMessage as '||SQLERRM||' has occured for '||user||'pk_xop_subsales.pr_process_exer');
            dbms.output.put_line('completed125');
END pr_process_exer;
Hi friends, any1 help me out how to define the ref-cursor in declaration section, and how to find at what situation the constraint error occurred..

956684 wrote:
Hi,.
Friends plz help me out ..how to debug and find the exact position of the constraint violation..thank you for the help..There isn't a way to trace it unless you have caught the exception raised.
As a way to start the debug, you will have to monitor
1. All DML's against the Table on which you have constraint. More specifically, the DML's that act on the column you have constraint on.
2. Use Exception Handling, to log the Error and the data that causes the constraint to fail.
3. Do not forget to monitor the Triggers, if they are used, that would write some data into the column you have constraint on.
Or
Another way to trace is:
select *
from user_source
where lower(text) like '%your_table_name%';
order by type, name, line;Look at the lines, exclude that are in Declaration or in SELECT statements and target the DML's.
Looking at the un-formatted code you posted, this statement looks like a culprit.
INSERT INTO tb_ml_exer_upload
(exer_num,exer_seq,
exer_dt, written_flag, backout_flag, output_line,
je_flag, opts_exer,
tot_tax,shrs_sold,comm_value,tot_fee,
mkt_prc,exer_type, soc_sec,
name_first, name_mi,
name_last,check_addr_1,check_addr_2,check_addr_3,
check_addr_4,check_addr_5,city,state,zip,country,
city_state_zip_country,
p_name,opt_addr1,opt_addr2,opt_addr3,opt_addr4,
opt_addr5,opt_addr6,
settle_dt,send_to_citibank_flag,
dom_chek_distr,foreign_currency_code,
distribution_method,wire_seq_no,
cusip_num, ml_retail_account,multi_curr_handling_fee,
ml_sec_num, corp_name,upd_optionee_addr,
outbound_flag, -- make it N
corp_symbol,taxwire_approve, -- make it not applicaplabe
exersource,
mail_cd, sp_mail_cd,
backup_withholding,
user_id,
acct_num_othr)
VALUES(v_order_dtls.exer_num,0,v_order_dtls.exer_date,'N','N',NULL,
-- PG 12/12/05 Changed to populate the je_flag based on dom_chek_distr 'D',
-- PG 12/16/05 JE should not be generated for international checks.. So 'Y' always
'Y', --je_flag
v_order_dtls.opts_exer,0,--total tax will be 0.
v_order_dtls.opts_exer, --shrs_sold,
v_order_dtls.comm_value,
--SPIF# 43161- replaced nvl(v_order_dtls.fixed_fee1, 0) with v_fixedfee1
v_fixedfee1 + nvl(v_order_dtls.fixed_fee3,0) + nvl(v_order_dtls.sec_fee,0), --v_order_dtls.fees_amt,
round(v_order_dtls.exec_price, 4),v_order_dtls.exer_type,
LPAD(v_order_dtls.ssn,9,'0'), --v_order_dtls.ssn, Modified by Suresh on 02/08/07 for SPIF # 37210
v_order_dtls.name_first,v_order_dtls.name_mi,v_order_dtls.name_last,
v_order_dtls.check_addr_1,v_order_dtls.check_addr_2,v_order_dtls.check_addr_3,
v_order_dtls.check_addr_4,v_order_dtls.check_addr_5,nvl(v_order_dtls.city,v_opt_dtls.city),
nvl(v_order_dtls.state,v_opt_dtls.state),nvl(v_order_dtls.zip,v_opt_dtls.zip),
nvl(v_order_dtls.country,v_opt_dtls.country),
SUBSTR(nvl(v_order_dtls.city||v_order_dtls.state||v_order_dtls.zip||v_order_dtls.country,
v_opt_dtls.city_state_zip_country),1,34), -- COLUMN LENGTH MAX IS 35
v_opt_dtls.p_name,v_opt_dtls.opt_addr1,v_opt_dtls.opt_addr2,v_opt_dtls.opt_addr3,
v_opt_dtls.opt_addr4,v_opt_dtls.opt_addr5,v_opt_dtls.opt_addr6,
v_settle_dt,decode(v_order_dtls.distribution_method,'W','Y','D','Y','C','Y','D'),
v_order_dtls.dom_chek_distr,v_order_dtls.foreign_currency_code,
v_order_dtls.distribution_method,v_order_dtls.wire_seq_no,
v_cusip_num,v_order_dtls.acct_num,v_order_dtls.multi_curr_handling_fee,
-- nvl(fn_get_sec_num(replace(substr(p_voucher_num,1,7),'SSO','XOP'),v_order_dtls.symbol),v_ml_sec_num),
nvl(fn_get_sec_num(v_ivr_plan_num, v_order_dtls.symbol),v_ml_sec_num),
v_compy_nme,v_order_dtls.upd_optionee_addr,
'N', --'N' is for outbound flag.
v_order_dtls.symbol,'D', --'D' for taxwires disabled
'S', -- 'S' for source being subsequent sale.
v_mail_cd, --need to get mail_Cd??
v_order_dtls.sp_mail_cd,v_order_dtls.backup_withholding,
user,v_order_dtls.acct_num_othr);What is the Table structure of tb_ml_exer_upload and what columns do you have constraints on?
Which column of the table tb_ml_exer_upload is your Primary Key (because constraint name mentions pk_tb_ml_exer_upload)?
Edited by: Purvesh K on Jan 4, 2013 12:57 PM

Unique constraint violation on version enabled table

hi!
we're facing a strange problem with a version enabled table that has an unique constraint on one column. if we rename an object stored in the table (the name-attribute of the object is the one that has a unique constraint on the respective column) and rename it back to the old name again, we get an ORA-00001 unique constraint violation on the execution of an update trigger.
if the constraint is simply applied as before to the now version enabled table, I understand that this happens, but shouldn't workspace manager take care of something like that when a table with unique constraints is version enabled? (the documentation also says that) because taking versioning into account it's not that we try to insert another object with the same name, it's the same object at another point in time now getting back it's old name.
we somewhat assume that to be a pretty standard scenario when using versioned data.
is this some kind of bug or do we just miss something important here?
more information:
- versioning is enabled on all tables with VIEW_WO_OVERWRITE and no valid time support
- database version is 10.2.0.1.0
- wm installation output:
ALLOW_CAPTURE_EVENTS OFF
ALLOW_MULTI_PARENT_WORKSPACES OFF
ALLOW_NESTED_TABLE_COLUMNS OFF
CR_WORKSPACE_MODE OPTIMISTIC_LOCKING
FIRE_TRIGGERS_FOR_NONDML_EVENTS ON
NONCR_WORKSPACE_MODE OPTIMISTIC_LOCKING
NUMBER_OF_COMPRESS_BATCHES 50
OWM_VERSION 10.2.0.1.0
UNDO_SPACE UNLIMITED
USE_TIMESTAMP_TYPE_FOR_HISTORY ON
- all operations are done on LIVE workspace
any help is appreciated.
EDIT: we found out the following: the table we are talking about is the only table where the unique constraint is left. so there must have been a problem during version enabling. on another oracle installation we did everything the same way and the unique constraint wasn't left there, so everything works fine.
regards,
Andreas Schilling
Message was edited by:
aschilling

hi!
we're facing a strange problem with a version enabled table that has an unique constraint on one column. if we rename an object stored in the table (the name-attribute of the object is the one that has a unique constraint on the respective column) and rename it back to the old name again, we get an ORA-00001 unique constraint violation on the execution of an update trigger.
if the constraint is simply applied as before to the now version enabled table, I understand that this happens, but shouldn't workspace manager take care of something like that when a table with unique constraints is version enabled? (the documentation also says that) because taking versioning into account it's not that we try to insert another object with the same name, it's the same object at another point in time now getting back it's old name.
we somewhat assume that to be a pretty standard scenario when using versioned data.
is this some kind of bug or do we just miss something important here?
more information:
- versioning is enabled on all tables with VIEW_WO_OVERWRITE and no valid time support
- database version is 10.2.0.1.0
- wm installation output:
ALLOW_CAPTURE_EVENTS OFF
ALLOW_MULTI_PARENT_WORKSPACES OFF
ALLOW_NESTED_TABLE_COLUMNS OFF
CR_WORKSPACE_MODE OPTIMISTIC_LOCKING
FIRE_TRIGGERS_FOR_NONDML_EVENTS ON
NONCR_WORKSPACE_MODE OPTIMISTIC_LOCKING
NUMBER_OF_COMPRESS_BATCHES 50
OWM_VERSION 10.2.0.1.0
UNDO_SPACE UNLIMITED
USE_TIMESTAMP_TYPE_FOR_HISTORY ON
- all operations are done on LIVE workspace
any help is appreciated.
EDIT: we found out the following: the table we are talking about is the only table where the unique constraint is left. so there must have been a problem during version enabling. on another oracle installation we did everything the same way and the unique constraint wasn't left there, so everything works fine.
regards,
Andreas Schilling
Message was edited by:
aschilling

Constraint violation on update through trigger

I have a table on which there are 2 before update triggers (one for update or delete and another for insert and update).
One of these tiggers is updating another table. (A history table)
Sometimes when I try to update a row in this table, this trigger tries to update the history table and fails with a constraint violation ORA error. However second time when I try to fire the same update sql, it goes fine.
What can be the possible causes? How do I rectify the same?
Thanks in advance

Hi,
I get the PK violation error. As mentioned earlier we try to update history table which has PK as (DEAL_NUM, VERSION). Please note that we are changing the version in the trigger. However exactly same update statement goes fine in second run. (The update is fired from code of the product I work on)
The trigger code is something like this:
CREATE OR REPLACE TRIGGER TEST1_HIST before update or delete on
TEST1 FOR EACH ROW
BEGIN
IF updating AND :new.version = 0 THEN
:new.version := :old.version;
ELSE
:new.version := :old.version + 1;
insert into TEST1_HIST(
DEAL_NUM
,VERSION)
VALUES
( :old.DEAL_NUM
,:old.VERSION
END IF;
END;
Thank you

Java.lang.LinkageError: loader constraint violation

I am using ToplinkEssentials as a persistence provider in a J2SE desktop application. I've encountered the following error.
java.lang.LinkageError: loader constraint violation: loader (instance of sun/misc/Launcher$AppClassLoader) previously initiated loading for a different type with name "expendituretracking/Employee"
I have unsuccessfully searched for a clue as to what is causing this problem. Any help is appreciated.

Hello,
Could this be related to the bug described at:
https://glassfish.dev.java.net/issues/show_bug.cgi?id=2625
If you have an interface involved, try adding them to the persistence.xml's list of classes.
Best Regards,
Chris

IMAP error: failed: Constraint violation

Sun Java(tm) System Messaging Server 6.3-1.04 (built May 9 2007; 32bit)
Has anyone seen these errors in their IMAP log?
I have seen several periods where these crop up combined with an inability for user to login via imap or http.
Logically something is happening at the DS end of things to cause this though I have yet to pinpoint it and b/c the directory logs do not show any clear
evidence of bind failures that correspond to the imap log entries it has me puzzled.
[25/Aug/2007:04:02:11 -0700] mina imapd[8231]: Account Warning: [128.111.207.54:34317] ldap bind (uid=help,ou=People,o=education.ucsb.edu) failed: Constraint violation

Thanks Shane
>
When do these periods occur (busy times etc.) and for
how long? Oddly, I saw this happen for an hour starting at 3AM (not a busy time with my users) Logs show another single user occasion happening in the PM at 16:00, but only for a few minutes.
>
Do you have to change anything (e.g. restart IMAP/DS
server, reset passwords) to get things to work
again?In the case of the hr long event I first restarted the DS which did not appear to fix the problem. I then restarted the msg-instance. The problem did not immediately clear up but did so shortly after.
Are all users affected for a period of time or just
some users. Any pattern?In the case of the long event I tested a variety of logins, which failed, and the logs showed that a variety of users could not login. There did not seem to be a pattern and as far as ican see all users were failing to login.
>
>
Do the LDAP logs show any bind attempt or any
communication at all related to the user(s) in
question. Are there any errors in the LDAP error
log(s)?I have not been able to definetevely correlate any errors in the LDAP logs at the time. However as far as I could see (with my account) I was binding OK at the time ( eg err=0) though I was not authing per the msg serv.
>
What version of DS are you running and do you use SSL
between the MS server and DS server?5.2 sp2, No SSL is used between the DS and msg-serv
>
Are you running any kind of load-balancer/directory
proxy etc. between messaging server and the directory
server?NO
>
Are you using account lockout/password expiry?YES, a lockout after 6 failed tries.
>
Do you see any err=49 or err=19 log lines around the
trouble periods?Yes, I see err=19 for the whole hr period in question as well as some err=49, though I do also see err=49 for other times but no err=19 at other times.
>
>>
There haven't been any reported cases of this
particular error in the IMAP logs but most constraint
violation problems revolve around either SSL issues
or account lockout problems. So more investigation
needed at your end.Ok I will log all this info and am logically thinking that if this IS an account lockout issue it seems to point to an automated DS attack of some sort ?
>
>
-john

Programatically detecting uniqueness constraint violations when using Direct Path API

I'm developing an application that bulk loads data into the
database using the DirectPath API.
According to the DirectPath API documentation uniqueness
constraints must be disabled prior to importing data using the
DirectPath API, then the constraints must be re-enabled.
If duplicate data is inserted when the constraints are disabled,
enabling the constraints results in the constraint's underlying
index being left in an "unusable" state.
The SQL*Loader tool (which also uses the DirectPath API) somehow
manages to deal with this.
It can successfully detect which data causes the constraint
violation, and politely writes the offending data to a bad rows
file.
If SQL*Loader also uses the DirectPath API - how does it detect
which data causes a constraint violation.
The mere fact that SQL*Loader can do this in DirectPath mode,
shows that it is possible.
Any ideas how to detect which data causes a constraint violation
when using the DirectPath API ?
- Andy

I'm developing an application that bulk loads data into the
database using the DirectPath API.
According to the DirectPath API documentation uniqueness
constraints must be disabled prior to importing data using the
DirectPath API, then the constraints must be re-enabled.
If duplicate data is inserted when the constraints are disabled,
enabling the constraints results in the constraint's underlying
index being left in an "unusable" state.
The SQL*Loader tool (which also uses the DirectPath API) somehow
manages to deal with this.
It can successfully detect which data causes the constraint
violation, and politely writes the offending data to a bad rows
file.
If SQL*Loader also uses the DirectPath API - how does it detect
which data causes a constraint violation.
The mere fact that SQL*Loader can do this in DirectPath mode,
shows that it is possible.
Any ideas how to detect which data causes a constraint violation
when using the DirectPath API ?
- Andy

Error Message - java.lang.LinkageError: loader constraint violation

Hi
I get the following errormessage if I try to apply a more recent build of the JPA Toplink Essentials.
If I use the glassfish-persistence-installer-v2-b45.jar all things work fine, but if a try to upgrade my program will fail. I tried the glassfish-persistence-installer-v2-b54.jar, all also tried all builds between?!
I have no idea how I may resolve the problem?!
Any ideas?
Thanks
Marcel
(I am using Java 6, Netbeans 5.5)
Exception in thread "AWT-EventQueue-0" java.lang.LinkageError: loader constraint violation in interface itable initialization: when resolving method "DatenStruktur.ConditionBasic.getCouplingElement()LDatenStruktur/CouplingElement;" the class loader (instance of oracle/toplink/essentials/internal/ejb/cmp3/JavaSECMPInitializer$TempEntityLoader) of the current class, DatenStruktur/ConditionBasic, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for interface DatenStruktur/Conditionable have different Class objects for the type DatenStruktur/CouplingElement used in the signature
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.getDeclaredFields(Class.java:1743)
at oracle.toplink.essentials.internal.security.PrivilegedAccessHelper.getDeclaredFields(PrivilegedAccessHelper.java:204)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataHelper.getFields(MetadataHelper.java:443)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataDescriptor.usesPropertyAccess(MetadataDescriptor.java:1081)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processAccessors(ClassAccessor.java:564)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.process(ClassAccessor.java:498)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.MetadataAccessor.processAccessor(MetadataAccessor.java:514)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.processTableAndInheritance(ClassAccessor.java:1388)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.accessors.ClassAccessor.process(ClassAccessor.java:484)
at oracle.toplink.essentials.internal.ejb.cmp3.metadata.MetadataProcessor.processAnnotations(MetadataProcessor.java:240)
at oracle.toplink.essentials.ejb.cmp3.persistence.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:370)
at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:600)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.callPredeploy(JavaSECMPInitializer.java:169)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initPersistenceUnits(JavaSECMPInitializer.java:237)
at oracle.toplink.essentials.internal.ejb.cmp3.JavaSECMPInitializer.initialize(JavaSECMPInitializer.java:253)
at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:140)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java):96)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java):73)
at MainProgramManagement.ProgramMain.getEntityManagerFactory(ProgramMain.java:347)
at MainProgramManagement.ProgramMain.persistData(ProgramMain.java:788)

upgrade to cf8, which supports jdk 1.6.
mx7 does not support 1.5 or 1.6
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

BP - Add additional Identification type as BPCCOD in Customer during replication

Hi All,
We have transferred all business partner from R/3 to CRM via initial load. We have Sold to party & Ship to party which are also assigned the BP role of Financial Partner and being used to create the Dispute Cases however we are unable to create the dispute cases in CRM system and also unable to search open item as Identification type BPCCOD with number as Logical system:Client is missing in the Financial Partner. As far as i know as per the SAP Standard functionality during customer download in CRM ID Type CRM002 gets added with ECC Account number by default.
So is there any way through which i can get additional ID Type BPCCOD with Number Logical system:Client assigned to Customers during replication and also if there is any standard program to achieve this functionality?
Thank you
Anand Kumar

Hi Anand,
As per my understanding, you want to add additional Identification type and number while downloading the customer from ECC (Initial load).
Go to tcode BUPA_CALL_FU.
choose event CRMIN and refer BUPA_INBOUND_MAIN_CENTRAL FM as an example.
Copy the FM and create a new FM.
This FM has the changing parameter of structure BUS_EI_EXTERN.
Add the code and Modify the data CENTRAL_DATA-IDENT_NUMBER as per your requirement.
then maintain your function module in BUPA_CALL_FU in the right sequence (after standard FM call).
I hope this will help you.
Regards,
Bala

DML ERROR LOGGING - how to log 1 constraint violation on record

Hi there
We are using DML error logging to log records which violate constraints into an error table.
The problem is when a record violates > 1 constraint it logs the record but details only 1 constraint violation - is there a way to get it to record all constraint violations on an individual record.
Many Thanks

In the Netherlands several years ago a framework called CDM RuleFrame was introduced that did just this. Their main thought was that it is desirable to collect all error messages from one transaction and display them all at the end of the transaction.
[url http://www.dulcian.com/papers/ODTUG/2001/BR%20Symposium%202001/Boyd_BR.htm]Here is an article that explains the concept.
In short: it involves coding every single business rule as a database trigger using transaction management of CDM RuleFrame.
I would not recommend it however, because I think [url http://rwijk.blogspot.com/2007/09/database-triggers-are-evil.html]database triggers are evil. However, it may appeal to first time users of an application.
Hope this helps.
Regards,
Rob.
Message was edited by:
Rob van Wijk
But if cannot be "turned on" by some switch: you have to design your system this way. So the short answer to your question is: no, it is not possible.

Custom Error Messages for Database Constraint Violations Problem

Hi
I have added a custom message bundle for the model project as explained in
37.8.3 in the Fusion Developer's Guide - How to customize error messages for database constraint violations.
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcadvgen.htm#BABEFGCI
Constraint Name : SYS_C0018574
And I have following CustomErrorMessages class
public class DBCustomErrorMessages extends ListResourceBundle {
    private static final Object[][] sMessageStrings =
        new String[][] { { "SYS_C0018574",
                           "Existing Record Found" } };
    protected Object[][] getContents() {
        return sMessageStrings;
}This works fine when I run application model and adding records to vialate the constraint. So it gives me following message
(oracle.jbo.DMLConstraintException) Existing Record FoundBut when run ui project it does not fire.
Still it gives the message
ORA-00001: unique constraint (CCBS2.SYS_C0018574) violatedCould you please shed some light?
Edited by: deshan on Mar 15, 2011 11:28 AM

Please see the image.
http://4.bp.blogspot.com/-Fna66p-W5Jw/TX7uSQqqBtI/AAAAAAAAAH0/D1APg6oAIxI/s1600/1.JPG
Error in Application Module ORA-00001: unique constraint (CCBS2.SYS_C0018574) violated exception is different from ui project.
Any hint?
Thanks
deshan
Edited by: deshan on Mar 15, 2011 10:16 AM

Constraint Violation During Replication Causing In-Doubt

Similar Messages

Maybe you are looking for