Constructions in Progress - Problem with CIAP evaluation area 50.

Good day
Experts
I'm having a problem with the assets in progress. The GST credit in the area 50 should only be done on the liquidation of fixed assets in progress for the final asset.
As the 4000 class, has no GST when transferring (here is transferred through the liquidation order, or modify the standard order of appropriation and appropriating the assets underway for the definitive asset).
Logically, the area 50 is not fed.
How can I leave the class of fixed assets in progress and no tax when you transfer to the ultimate ownership of the GST.
Thanks already.
The SAP version is 4.7 and were used as the basis of SAP standard solution for CIAP.
Thanks in advance.
Diego

Hi Diego,
What do you mean with 'GST' or 'GST credit'?
Also, I am not clear what you refer to with 'CIAP'? From the asset class 4000 I take that you are referring to 'asset under construction' (AuC) issue.
Can you maybe provide more details to describe the problem, if possible?
I then will try if I can help you.
Thanks and best regards,
Brigitte Kuehni

Similar Messages

Problem with multiple content areas

Hi,
I'm stuck with following problem. I need to build the form that should contain two logical areas on the each page. Main area should handle main form content (long table) and another area containing barcodes(dynamic list that should be filled from xml). Each area must be flowed cause both table and barcodes data may be longer than their subforms.
I've made one master page with two content areas on it.
I've made main form page with two flowed subforms and customize their pagination so that each subform overflow be directed in corresponded content area.
It's seems like all ok, but here's the problem:
While the table data gets overflowed to next page, the barcodes data starts to filled ONLY when the table data ends.
e.g. I've got 3 pages of table data first and more 2 pages of barcode data next instead of only 3 pages with all data compiled together.
Can you help me with this issue?
Thanks!

Thank you for quick answer!
sad to hear that such a logical way of solving the problem is impossible in LC..
Maybe you can help me to find a right way?
little more details about my issue:
I need to manage the form so that it could include both table and barcodes(list) items (while each of them may flow onto multiple pages of the form). E.g. table lasts 4 pages and barcodes lasts only 2 pages.
Table and barcode items are filled from xml file.
e.g.
123456
I've make a sketch of desired form layout:
http://www.ljplus.ru/img4/_/a/_a_lexx/form.gif
Please, help me to find right way of doing this?
Thank you!!

Not posted Treasury transactions- problem with new Business area (NewGL)

Hi all,
I have to change the Treasury account assignment objects due to a restructure. Currently, all TR transactions are assigned to one business area only.
In future, there will be 3 (different) business areas.
I have added new products, transaction tpyes etc and I have made further customising
settings. It looks ok and I can enter new transactions, settle and post them.
Problems I do have with already existing deals (fixed term and Forex transactions).
In here I get posting errors with message:
Balancing field "Business Area" in line item 001 not filled
Message no. GLT2201
I have added additional account assignment references for the new Business Areas
and assigned to product types and account assignment
What happens when I create a deal?
Is that information (product type/ transaction/ account assignment) alreaedy stored in a table and used, when processing the deal further?
Can I somehow change that original assignment per deal now?
I think my problem lies in that the system wants to use the old assignment but also the new and it comes to conflict in field business area.
Any hints much appreciated and will be reqarded as usual.
Thanks
Hein

Assign Business area in the following step (ECC 6.0)
SPRO - Financial Supply Chain Management - Treasury and Risk Management - Transaction Manager - General Settings - Accounting - Link to Other Accounting Components - Allocate Additional Account Assignments to Account Assignment References
Kalyan

Problem with creating specific area by using BDT

Hi Experts, i need some help plz,
I have finished all the steps in note690900. But, there are 2 problems:
1. I created a field called "PLU" (it has a matchcode), which must be displayed in a sub-screen (I create the sub-screen also) in TCODE REBDAO -> general data
Now, the problem is that it is always display under both 'CHANGE' and 'DISPLAY' (That means, I can always modify the value of this field, but normally, we can't modify any value under 'DISPLAY')
It is strange, I think the Filed Status must be modified, but I don't know how, do u have any idea for that?
2. In TCODE REBDPR, I need to add a new reference/index,(just like 'general data', 'building law and usage' u2026) so in TCODE RECACUST -> Usage View -> Property -> Dialog -> Screen Sequences -> Screen Sequences Category u2013 Screen, I copied the standard to 'Z*', and added the new reference/index, then in Screen Sequences Category - Screen Sequences, defined the 'Z*' be displayed as standard.
But the problem is: in TCODE REBDPR, the screen always displays the version of standard but not my 'Z*', how can I let the transaction display my screen 'Z*'?
thanks

Hi,
please try the following.
1.
I assume you have set the field status according to the activities (display/change) for your field group.
Please check if the PBO and PAI modules are created as described in note 690900 and assigned to the field group.
note 690900:
c) Create a view for your fields by choosing 'Dialog -> Screen
   Layout -> Views'. For this purpose, copy an existing entry, for
   example REGC02. The name of the new view must begin with the
   application, for example ZZZZ01 with the text 'Contract: File
   number'.
   In 'Application' field, enter the name of your application.
   In the 'Subscreen' area, enter the program name (SAPLaaaaaa with
   aaaaaa being the name of your function group) and the screen
   number of the subscreen created before:
   Program name: SAPLY_REGC_EXT
   Screen number: 0901
In the 'Function module' area, enter the name of your PBO module
   in field 'Before Output' (for example, ZZZZ_REGC_PBO_Z901), and
   enter the name of your PAI module in the 'After Entry' field (for
   example, ZZZZ_REGC_PAI_Z901). Leave the values of the remaining
   fields for the view unchanged. NEVER use the function modules
   from the standard view in your own screens. If you do so, a
   program termination will occur because the subroutine to be
   called is determined dynamically by the standard module.
Please assure that the function modules are created and assigned to   the view you have created.
Please check also if the fields in your field group are assigned to the right table.
e.g. PROPERTY
The right one is REBD_PROPERTY_CI, not CI_VIBDPR!
Please check also in your screen that your new fields have assigned the right structure (REBD_PROPERTY_CI) with dictionary reference!!
2.
Please check your entries in Screen Sequences Category - Screen Sequences.
There should be both(!) entries the standard REBDPR and your Z* entry. Then you set the button 'standard' for your screen sequence and it should work. (I checked it in my system and at least there it worked)
Hope this helps.
Regards, Franz

Problems with how fonts are displayed across CS 6 since updating to OS X Yosemite

I have recently updated CS 6 to its newest versions and also upgraded to OS X Yosemite and now the fonts in the preview panel don't show up as they used to. I don't think this is a major problem but it's just annoying. Does anyone know what the problem is or how i can fix it?
I've included a screen shot of how it looks on illustrator and how it looks on microsoft word to show the difference.
Any help at all would be appreciated.
Thanks.

"lauragilbertdesign (in response to gtbernstein) "
thanks to you both, mine the same, in the middle somewhere, and now a message to Adobe;
You know it really gives me the pip (replaced extreme expletive with "pip" since expletives make Adobe wince) when I have to search through here for solutions to Adobe problems.
Why does Adobe support have a lovely walled garden going on and no place for me to report bugs ?
These type of bugs should be put on a list for Adobe developers to fix, but they don't, this "pip" software just goes on & on & I have to pay for this "pip" and live in pain all day while I try to make a living using this "pip".
Adobe, you are "pip".

Problem With Sliders and Area of a circle-

Hey everyone--
New to Java and trying to work on an application where an oval is being manipulated by a slider and i have to caluculate and display the semi major(basically the diameter) and semi minor axes and caluculate the area of the ellipse. The center of the ellipse. should be on the center of the panel. A JSlider should be provided to alter the length of the major axis of the array. Note: the major axis may be along the x-axis (horizontal) or y-axis (vertical). The slider should be set up to represent percentage of the major axis. When the slider is at 0%, the major axis length would be equal to zero. When the slider is at 100%, the major axis length should be equal to the length of the JPanel.
The major part I am having trouble with is how to get the oval to start at the center of the JFrame and how to get the circle to stop at the ends of the width of the JFrame and the ends of the Height of the JFrame.
I have two different classes here they are below: the ovalPanel just draws a circle on it self and then the slider demo is an extension of that and is being used to calculate the area and semi major etc...
import java.awt.*;
import javax.swing.*;
public class ovalPanel extends JPanel
{ int diameter = 10;
public void paintComponent(Graphics g)
super.paintComponent(g);
g.fillOval(246,237,diameter,diameter);
public void setDiameter(int newDiameter)
diameter = (newDiameter >= 0 ? newDiameter : 10);
repaint();
public Dimension getPreferredSize()
return new Dimension(500,500);
public Dimension getMinimumSize()
return getPreferredSize();
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class sliderDemo extends JFrame
{ private JSlider diameterSlider;
private ovalPanel myPanel;
private JPanel textPanel;
private JTextField textField1, textField2, textField3;
private JLabel label1, label2, label3;
public sliderDemo()
super("Slider & Ellipse Demo");
myPanel = new ovalPanel();
myPanel.setBackground(Color.YELLOW);
diameterSlider= new JSlider(SwingConstants.HORIZONTAL, 0, 400, 10);
diameterSlider.setMajorTickSpacing(10);
diameterSlider.setPaintTicks(true);
diameterSlider.addChangeListener(
new ChangeListener()
public void stateChanged(ChangeEvent e)
myPanel.setDiameter(diameterSlider.getValue());
textField1= new JTextField(5);
textField2= new JTextField(5);
textField3= new JTextField(5);
label1=new JLabel("semiMajor: ");
label2=new JLabel("semiMinor: ");
label3=new JLabel(" Area: ");
textPanel = new JPanel();
textPanel.add(label1);
textPanel.setLayout(new GridLayout (1,3));
textPanel.add(textField1);
textPanel.add(label2);
textPanel.add(textField2);
textPanel.add(label3);
textPanel.add(textField3);
Container container = getContentPane();
container.add(diameterSlider, BorderLayout.SOUTH);
container.add(myPanel, BorderLayout.CENTER);
container.add(textPanel, BorderLayout.NORTH);
setSize(500, 500);
setVisible(true);
public static void main(String args [])
sliderDemo application = new sliderDemo();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Anyone help out with this--would be greatly appreciated
rich_crush

Here is a better description of what is needed :
Write a GUI application that displays an ellipse (oval) of variable size and calculates and displays the semi-major and semi-minor axes and the area of the ellipse. The size of an ellipse is determined by two constants, conventionally denoted a and b. The constant a equals the length of the semi-major axis (i.e. half of the length of the major axis); the constant b equals the length of the semi-minor axis (i.e. half of the length of minor axis).
The area enclosed by an ellipse is , where � is Math.PI.
All drawings must be done on a subclass of JPanel, and the result of the calculations should be displayed in JLabels. The center of the ellipse. should be on the center of the panel. A JSlider should be provided to alter the length of the major axis of the array. Note: the major axis may be along the x-axis (horizontal) or y-axis (vertical). The slider should be set up to represent percentage of the major axis. When the slider is at 0%, the major axis length would be equal to zero. When the slider is at 100%, the major axis length should be equal to the length of the JPanel. The initial major axis length should be at 1/2 of the panel length.
As the ellipse. changes, the lengths of the semi-major axis, semi-minor axis, and the area should be updated and displayed.
The animation below illustrates the Ellipse Slider program in motion. As you see, the drawn shape will be a circle until it grows big enough to touch the long sides of the JPanel, after which, it will grow as an ellipse (oval) until it touches the narrow sides of the panel.
Please help--very confused :)
rich_crush

Position problem with four zoom areas at a slide

Hi to all,
my problem, i've made a slide, containing a single picture (periodic table). Then, i added four zoom areas at the elements C, H, S and N. Source areas are 45 by 45 px, target areas are 180 to 180 px. I try to set fixed postions for the targets (Target || position X || Position Y):
Target 1
90
330
Target 2
290
330
Target 3
490
330
Target 4
690
330
The result looks really ugly, size and positions went totally wrong. This is just an examples, sometimes, the target areas are overlap each other, looks like a silly randomizer at work...
Maybe anyone can give me a idea/solution to fix this?
Thanks in advance
Marc

If you use CP5 or CP5.5 I would use Effects in this case: a combination of a motion path and scaling. Try to find the correct combination, save as a custom effect and apply to all the elements where you want the Zoom.
Lilybiri

Is anyone having problems with trail sites are not allowing updates under the new rendering engine.

My Trial sites are NOT saving edits made in multiple areas.
Examples
Products - Anything I try to do in the product description window says it has updated but then reverts back to what it was originally.
Web pages - Same for anything in the page updates in the page content window.
Product Attributes wont update.
It appears I can add new things, but no edits work.
All say they are saved then revert back on screen to previous version.
It is only happening on my trial sites, which has been upgraded to the new liquid engine as far as I can tell as my live sites are fine. (or not converted yet)
I can do some updates via dreamweaver and FTP.
Thanks
Melissa

Thanks
I have contacted support and it appears to be only an issue with IE as works in Firefox.
They are saying it is an issue with my PC / Browser as they cannot recreate it -
I have reset all IE back to standard settings.
My question is if it were only an issue with my browser, why does it work on the live sites and the sites not yet transitioned.

Problem with adding text area in scroll pane

hi , i have been facing this funny problem , but cant able to get solution.
the problem is i am trying to add text area in scroll pane , but when i add textarea in scroll pane using scrollpane.add(textarea) that text area remain disable always. i tried making it enable explicility but that code is not working.

You don't use the add(...) method for JScrollPane. Use:
a) new JScrollPane( textArea );
b) scrollPane.getViewport().setView( textArea );

Problem with saving text areas

I'm trying to use the FileDialog() class to save a file but I'm having a few problems - I'm only really familiar with it to open files not save them - I have the following code.
save = new JButton("Save");
      save.addActionListener(
      new ActionListener()
    public void actionPerformed(ActionEvent evt)
      String saveName;
      saveNameBox = new FileDialog(frame,"Save File", FileDialog.SAVE);
      saveNameBox.show();
      //display the name
      saveName = saveNameBox.getDirectory()+File.separator+saveNameBox.getFile();
       try
        saveFile = new PrintWriter( new FileWriter(output.getText()));
      catch (IOException e)
        System.err.println("Error in file" + saveName + "; " + e.toString());
        System.exit(1);
[\code]

new FileWriter("abc") creates a FileWriter that will write to the specified file (abc). You have got the filename mixed up with the text you want to write to the file.
You must then write the text after you have created the FileWriter.
try replacing
saveFile = new PrintWriter( new FileWriter(output.getText()));
with
saveFile = new PrintWriter(new FileWriter(saveName));
saveFile.print(output.getText());
saveFile.close();

Facing problem with call subscreen area in standard infotype

Dear SAP Guru's,
I have enhanced standard infotype 0185 from PM01, in assign enhancement tab it create multiple screens ,
my program name ZP018500, screen number 0200 generated,
on 0200 screen i need to display two subscreens tfor that
i have created subscreen area on srcreen 0200 which is already a subscreen.
and i am calling two subscreen 0201 and 0202 on that subscreen area.
while creating entries for 0185 infotype my screen keep going in continious loop for call subscreen statement on 0200 screen number.
roll in fail, session terminated error coming because of this.
is it correct to create subscreen area on subscreen and calling subscreen on that.
Guide me to solve the issue.
Thanks and Regards,
Syed

Dear Gopal,
Thanks for the reply,
But i can't make 0200 screen as normal screen because it is automatically generated by system while enhancing the standard infotype,
Please let me know any other solution.
Regards,
Syed Taj

Problem with translation of Area Manu.

Hi
I need to translate the AREA MENU (T-code SE43)
The steps followed:
1) Go to SE43 in change mode
2) Goto menu: Utilities-> Translation
3) Made the translation
4) Saved & activated... It asked for the transport tequest.
When the request was transported the changes(translation) did not get reflacted in the target system.
Could you please suggest how to translate Area Menu so that the changes go to the target system
Thanks!

Hi
The text of the menu can be bufferd, try to run the report BMEN_CORRMEN1 in target system
Max

Problem with depreciation area (Incorrect currency exchange rate is used)

Good day to all SDN forumers!
I'm having a problem with one depreciation area that we set up. The reason why we configured this depreciation area is for us to enable to monitor all asset postings in another (group) currency aside from the local currency. We set it up in such a way that the depreciation would not post and would thus only "convert" the asset postings to group currency using the table rates in table TCURR (via OB08).
The problem is despite having defined an exchange rate for the current period, the system still picks up the exchange rate for 01/01/2001 which is incorrect. This affected all reports which displays incorrect values whenever I view the postings using the 2nd depreciation area we set up. Is there a way we can correct this?
I'd really appreciate your comments and suggestions guys. Thanks a lot and more power!

Update:
I created a new depreciation area by copying an existing area and updated some of the configuration. The problem is still there though, since the depreciation area still reflects the <b>incorrect</b> rate (similar to that of the previous depreciation area) whenever I access it using Asset Explorer. What's surprising is that even though I've already set the exchange rate (e.g. USD to EUR) to match that of the asset's capitalization / acquisition date, the posted values still do not reflect what I defined in table TCURR. Instead, it reflects the exchange rate used by the old depreciation area. Help anyone? We are already in a production client and transfer/retirement of all the assets is not an option the client would like to undertake.
Edited by: Patrick on Nov 6, 2008 4:45 AM

Problem with Tools Area iView Creation - Help Needed.

Hi Guys,
I am having a small problem with the Tool Area Par, I downloaded the Par and have edited it and then redeployed it on the Portal, however when I am creating an iView I am getting the Following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.toolAreaiView
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Can anyone suggest me what could be wrong and why I am not able to see the Iview and why I get this exception.
Thanks,
John.

Log File:
[code]
Component : com.sap.portal.navigation.toolarea.default
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.navigation.ToolAreaiView of Portal Component com.sap.portal.navigation.toolarea.default because: Could not find implementation class
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:242)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
     at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
     ... 26 more
Caused by: java.lang.ClassNotFoundException: com.sapportals.portal.navigation.ToolAreaiView
Found in negative cache
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@2086d]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@695f94]
References:
   not registered!
Resources:
   C:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.portal.navigation.toolarea
private
classes
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:219)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
     ... 30 more
[/code]

When are you going to issue a new version to overcome the problems with Firefox 4?

The problems with Firefox 4 are already listed on your help pages, such as Firefox freezing when a Google search is attempted. I've had to go back to 3.6.17 because version 4 just doesn't work. Whatever have you done?

It's not going to happen. Google announced withdrawal of their Google Toolbar.
Using Google Toolbar features without toolbars - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
The Google Toolbar will not be updated for Firefox 5 or later Firefox versions. ([http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html reference]) Google finally decided that their [http://kb.mozillazine.org/Problematic_extensions problematic extension] is beyond repair for the little benefit added for Firefox users. Google as with other browsers is eliminating or making toolbars less accessible.
Consider the features that you are using and see if you can match up features from the list created by Google and by Firefox users.

Constructions in Progress - Problem with CIAP evaluation area 50.

Similar Messages

Maybe you are looking for