Consume more battery wifi or 3G

further increasing battery consumption, be connected to a wifi network or be connected to a 3G network?

Generally 3G, especially if you have a poor or weak signal.

Similar Messages

Artworks consumes more battery power significantly? Maybe a GOOD IDEA!

I'm searching for ways to improve battery power and...
1. Artworks consumes more battery power significantly?
2. If we found a program that equalize (ROCK for example) all mp3 before copy to iPOD, it discards EQ on iPOD to improve power?
Good idea???
Thanks!

I'm searching for ways to improve battery power
and...
1. Artworks consumes more battery power
significantly?
Very insignificantly... to such a tiny degree that it's not an issue.
2. If we found a program that equalize (ROCK for
example) all mp3 before copy to iPOD, it discards EQ
on iPOD to improve power?
Good idea???
If that's what you want, then I guess it's a good idea. Be aware that raising the eq level also increases the volume. iPods distort extremely easily when the volume going into the amplifier exceeds a certain level.
Once you've run your eq software, be sure to use a piece of software called mp3gain on your files after you do your eq. It will analyze your files and completely losslessly adjust the volume, without even modifying the song bitstream data - magic! This software can handle mp3's by default, and AAC files if you add something else.
http://mp3gain.sourceforge.net/
But before anyone else thinks of running mp3gain on their mp3's or AAC's... DON'T do it for files that have already been imported into iTunes if you use the 'sound check' feature!!!!!!

Which one consumes more battery for c7....wifi or ...

my c7's battery drains quickly while using in 3g mode
curious to know
will nokia c7 consume same amount of power while phone in gsm mode and internet access on phone using wifi compare to internet access on phone using 3g network?
Solved!
Go to Solution.

Of course 3G drains battery faster than wi-fi (when the same data volume is transmitted) Just imagine the range of each data transmission . 3G has maximum range around 20km while wi-fi has only 200m outdoors

How can i see which apps in my ipad consume more battery power

I noticed lately the power consumption on my ipad 3 has gone considerably up. A full charge lasts me about 8 hrs and to chrge it upm(through the mains), it takes 4hrs +. I downloaded many apps lately and suspect one of them may be power hungry.Is there a good App that allows me to establish which app(s) eat up the power on my Ipad 3 & equally allow me to terminate unnecessary processes?
Any suggestions folks?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Stratosphere consuming more battery when not in use

Does anyone know what might cause this and/or if there is a fix for this?

sorry for slow reply but in order the answer to your questions are: 1. i get about 4-5 hours of idle time off the charger 2. yes i do 3. yes i use the default one that came with the phone, called program monitor 4. this is a replacement phone as my last phone had battery issues as well though it had problems with being active as well as passive but back to the point the phone did not come with a battery
oh and i did the math my passive time is close enough that a geusstimate of the math was that it was useing more. it isn't quite useing more but it is very close
edit: this problem did not occur when the phone was first received i got about 3-4 days of normal behavior and then it went and started this

Why my ipad (4th Gen) consume more power when reading books in ibook than surfing over wifi

when i m reading my books in ibook it consume more power .I notice that power decrease 1% per 4 minutes

Power consumption increases significantly when the screen is set to a high brightness. If you are using your iPad ins a bight environment, for example, outside, flourescent lights, etc. and have auto-brightness turned ON then the iPad will automatically increase screen brightness resulting in higher power consumption.
Also using small changes in battery percentage to predict total power reserve is not very accurate.

What actually uses more battery power - WiFi or 3G ?

I've read conflicting thoughts, so I wanted to ask which actually uses more battery power - WiFi or 3G ?
Does anyone leave WiFi disabled all the time?

Thanks for all your responses. I suspected WiFi used more power and you guys confirmed that.
BTW - Michael, 0.5 watts is 500 milliwatts... so you're off base with the comparison of the couple-of-hundred milliwatts for wifi vs. 0.5-1.0 watts for 3G. Excuse me... I used to be an engineer

Clock, battery, wifi, etc icons show hourglass

For the last couple of days, the icons at the top right of the screen show an hourglass when I hover the mouse over them, and they are unresponsive. This persists even through a restart. In fact, all icons except Spotlight show the hourglass when I hover over them.
The icons I have are clock, battery, wifi, bluetooth, volume, scripts, time machine and iSync.
The clock doesn't even update itself any more.

Uh... if you are getting an hourglass on Mac OS X, you need to perform some sort of exorcism for evil Windows demons.
But if it's a spinning disc or wristwatch, either do what SteveLamb0 said, or even just try force-quitting the process SystemUIServer so it will reload itself. (You can just reboot your whole Mac if you don't know how to do that.)

Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support

Consuming more swap space after upgrade from 10.2.0.1 to 10,2.0.4 on Solari

Hi,
After upgrading 10.2.0.1 to 10.2.0.4. Out of four database in one database is consuming more swap space. and in another database while executing catupgrd.sql, it is coming out with error ORa-04030 out of process memory error.
thanks in adavance
Anil Pinto

For your ORA-04030 error, pl see if MOS Doc 414237.1 (ORA-00600 [kksCallPopCallback] ORA-04030 (kxs-heap-c,kdbmal allocation) While Upgrading The Database From 9.2.0 To 10.2.0, With ORA-03113 Errors Halting The Execution Of catupgrd.sql on UNIX platforms) can help
HTH
Srini

Query to find out which process consuming more cpu?

Hi All,
some one please tell me the query to find out which process is consuming more
cpu resources?
Thanks and Regards
Srikanth

Use V$SESSTAT to determine which sessions are using most CPU, and investigate what SQL these users/sessions are executing:
SQL> select ss.sid, se.command, ss.value CPU, se.username, se.program
from v$sesstat ss, v$session se
where ss.statistic# in
(select statistic#
from v$statname
where name = 'CPU used by this session')
and se.sid=ss.sid
order by ss.value desc;

How to find top 10 SQL statments which are consuming more cpu time.

hi all,
Is there any command or script to monitor the top 10 sql statments which are consuming more cpu time.
I know by using AWR REPORT we can find it, i want the command or script to find the top cpu utilization sql statments.
Regards
Subhash.

Subhash,
A quick and dirty Google search could have get you started with the following:
Thread: how to get top CPU consuming sql oracle 10g
Re: how to get top CPU consuming sql oracle 10g
Oracle SQL top sessions
http://www.dba-oracle.com/oracle10g_tuning/t_sql_top_sessions.htm
"How to Find top 10 expensive sql's", version 9.2.0
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:73325450402303
HTH,
Thierry

In subcontracting the component quantity consumed more than the BOM quantit

Dear Experts,
In subcontracting the component quantity ( 543) consumed more than the BOM quantity while doing GR, so please let me know what may be the possible reasons for the same.
Regards,
Balu

Balu
may be the suncontractor needed more than the BOM quantiy.It is the case of overconsumption of components.

How to identify TOP 5 SQL consuming more CPU time without using statspack

How to identify the TOP 5 SQL queries which are consuming more CPU time during the timespan of 24 hours for entire database. There are N number of users who have issued sql queries, out of which few users have disconnected and few user are still connected to the database(I need to consider all sessions). My database version is 9.0.1. I don't want to use statspack. Is there any way to identify TOP 5 SQL consuming more CPU time without affecting the performance of the database. Can any one help me on this? Its urgent!!.

My database version is 9.0.1. I don't want
to use statspack. Is there any way to identify TOP 5
SQL consuming more CPU time without affecting the
performance of the database. Can any one help me on
this? Its urgent!!.I cant understand why you dont want to use statspack. As it is very easy to use and very quick to identify bottlenecks. Try using statspack. Its really wonderful.
Particularly in your case statspack is the best.
Regards,
Sanju.

My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

iOS 7 has many multiple tasks. You can save battery life to some extent by few steps. First go to location services and bettr 'Off' them which are not needed. (Ex. Notes.. Reminders.. Etc). Also you can off few apps in 'get notifications' centre. Also usage of 3g by any mobile consumes much battery life. Better to connect any Wi-fi

Consume more battery wifi or 3G

Similar Messages

Maybe you are looking for