Consumer Goods Trade Funds Analytics Fusion Edition

I am trying to download this analytics fusion. Where can i find this and want to look at the webcat, need to find list of reports available with this pre-package.
Please help
Thanks

Hi
Most of this information is kept in the BI Apps information center on My Oracle SUpport:
https://support.oracle.com/CSP/ui/flash.html#tab=Dashboard(page=Dashboard&id=h1ywcgo3()),(page=KBNavigator&id=h1ywehbj(searchMode=1145&viewingMode=1143&searchControl=1146&&))
It's note 1318707.1.
On here are links to a Data Lineage spreadsheet, Content guide and a Data Model Reference guide for all different recent versions. You should be able to find a lot of the information you require there.

Similar Messages

  • Oracle Business Analytics Fusion Edition Data Model Reference

    Dear All,
    I want to make a study of the pre-built warehouse data schema, and there's a book named <Oracle Business Analytics Fusion Edition Data Model Reference> from the installation and configuration guide, but i cannot found it in the metalink and metalink3.
    Could anybody tell me how to access the reference or provide me a link to it?
    Any help would be highly appreciable.
    Best regards,
    Zigzag

    Oracle Business Analytics Warehouse Data Model Reference Version 7.9.6 (Doc ID 819373.1)
    Oracle Business Analytics Warehouse Data Model Reference Version 7.9.6 Applies to: Business Intelligence ... Warehouse. This data model reference document
    Doc Type:REFERENCEModified:5/5/2009
    https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=819373.1&h=Y

  • Financial Services Profitability Analytics 7.9.5 Fusion Edition with OFSA

    Who to configure Financial Services Profitability Analytics *7.9.5* Fusion Edition with OFSA,
    I know it's supported in version 7.9.2 & 7.9.3
    and i have the documents
    [http://www.oracle.com/technology/products/bi/bi-vertical-analytics.html]
    and the in " Component Pricing Oracle Business Intelligence Applications Global Price List July 17, 2008" for BI Applications Fusion Edition
    it say
    **"Financial Services Profitability Analytics is designed to integrate with OFSA. There is no ETL so the Informatica requirement does not apply to Financial Services**
    **Profitability Analytics"**
    but after installing BI Applications 7.9.5 I did find any thing related to OFSA
    is there any document instraction for this area
    Thank You

    Thank you for your replay
    OK, the new version named Oracle Financial Analytics but does the it support OFSA
    My question where is the document that show the integration between OFSA and OBIE Oracle Financial profitability Analytics
    in the old version the document say that there is a PLSQL package to make the integration with OFSA to build the data-mart tables and to get the data from OFSA tables to the data-mart tables
    i didn't find any reference in the new version for this package and nothing when i install the Application

  • Fusion Edition...

    The Oracle BI media pack on edelivery was down for a day, and I guess they just put it back up as a new pack. One difference is a new download, basically an Excel spreadsheet, entitled BI Apps Fusion Edition Licensing and Packaging Guide. From glancing through it, I guess various analytics modules are being deprecated or consolidated together; the spreadsheet tries to relate fact tables to the various analytics apps and some other things. For people trying to simply get their head around the whole picture of what's available and how it all fits together, this is a nice document to check out.

    Hi Damon,
    I am glad to see this news...
    Pls.share some of your views on this...
    The Document is available in eDelivery
    Regards,
    vsr

  • Trade Funds report to update Settled key-figure for rebate scenario

    Dear Experts,
    We have a scenario where we are triggering rebate creation in ERP from Trade Promotion in CRM.
    The rebate accruals are generated over a period of time based on sales orders.
    Now we have 3 standard SAP Trade Funds reports which helps us in extracting the accruals data from ERP rebates and updates "Accrual Balance" key-figure of the Fund associated with the Trade Promotion.
    Now in ERP once the rebate settlement is created, is there any standard SAP report which will update the "Settled" key-figure in the Fund.
    Please advise.
    N.B. Our scenario has TPM integrated with Trade Funds & we are using CRM 7.0 EhP1
    regards
    Animesh.

    Many thanks for ur replies!
    problem here is that, since i had declared this  particular fileld as a integer type key figure, it is not allowing me to enter characteristic values in  update formula .
    and venkat, how can i change that key figure to char? is that possible? they have specifically told to write as a key figure. and in this model we have only one key figure ( this particular field ).
    that infoobject is not available in BW as of now. so i had created it as a key figure as was told by them.
    Thanks,
    Ravi

  • Install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0

    Hi Friends,
    I want to install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0. on windows
    Please let me know what are all the Pre-reqs needs to be installed and how to install Oracle Hyperion Planning, Fusion Edition Release 11.1.1.3.0.
    Provide me the installation document as well for all these.
    Regards,
    DB

    Hi,,
    You can download PDF
    [download.oracle.com/docs/cd/E12825_01/epm.../epm_install.pdf]
    and see all req. before downloading all components from
    [http://edelivery.oracle.com]
    Thanks
    Focusthread Hyperion Trainer
    [http://focusthread.com/training]

  • I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

    I am wondering if it will be a good move to install fusion 5 on my iMac. I am wondering since I did the split to run windows 7 if this means that I will have to erase all and start from the beginning

    From what you say, I understand that you already installed Windows 7 on a second volume. Is this correct?
    In that case, it doesn't make sense to use VMware Fusion unless you want to run Windows and OS X at the same time. If you do that, you will keep all your data.
    If you haven't installed Windows 7 and you want to install it in VMware Fusion, you will be installing it in a virtual machine, so you won't lose anything.
    I recommend you to have a look at VirtualBox first > http://www.virtualbox.org It's free and it's sufficient for most of users

  • How to configure this material type We will treat it as  consumable goods?

    Dear Experts,
          How to create new material type which we will treat as  consumable goods?
    Also, for all purchase, we want to have the GR Non-valuated checked so that the actual cost will not have effect after goods receipt but will be effective when the invoice has been entered. No inventory will be used.  We will treat it as other consumable goods.
    For GR Non-valuated, it means the actual cost will not happen in goods receipt only.
    we will create po and gr and invoice and payment. can you tell me what we have to pay attention to ?
    Best Regards,
    Merry

    you can use material type UNBW, because its having non valuted ticket and quantity updation also not there, and you can do PO, GR, Invoice and payment as a normal process, but the only difference is when you do GR the value of that GR is immediately charge out to an account or cost center including quantity. but you will do the MIRO to clear GR/IR account.
    regards,
    qsm sap

  • Hyperion Planning Fusion Edition, what components are required?

    Hello,
    Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
    Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
    Thank you
    Regards
    Marcin Stawny

    Hi,
    You will need the following :-
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
    Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
    Oracle Essbase Client Release 11.1.1.1.0
    Oracle Essbase Server Release 11.1.1.1.0
    Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
    Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
    Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
    You can find the files on Oracle edelivery or here
    Cheers
    John
    http://john-goodwin.blogspot.com/
    John

  • Standard objects for Trade Fund Management

    Hi everybody,
    Iu2019m working on Trade Fund Management, I need to import CRM data to BW.
    Iu2019ve searched on the BI Content for standard TFM Data Sources, DSO and cubes, but I wasnu2019t able to find anything: there's an InfoArea called 0CRM_FM, but itu2019s empty.
    In CRM I was able to simulate extraction for BW by using RSA3 transaction (i.e. extractors 0CRM_FM_FND, 0CRM_FM_FND_PLAN, 0CRM_FM_FU, etc).
    We have installed Support package 703, level 14: where can I find standard structure for TFM? do they exist?
    Thanks in advance,
    Francesca

    Hey
    This is not related to XI.
    Please post your question in either CRM or BI forum.
    Thanks
    Aamir

  • Restart Essbase Fusion Edition

    Am doing Planning and just changed NETRETRYCOUNT and NETRETRYINTERVAL in essbase.cfg, I only see startessbase.cmd and do not see stopessbase.cmd. How do I do a clean server-restart on the Fusion Edition?
    Thanks

    Hi,
    What OS are you running it on, if it is windows then more than likely you would just restart the windows service.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • OBIA Fusion Edition

    Hi,
    Could someone let me know conceptually about the Fusion Edition of BI Applications.
    Comparison of Business Intelligence Enterprise Edition and Fusion Edition?
    Thanks,
    RS

    Hi RS,
    Please check the following sites;
    Oracle BI Applications is an out-of-the-box Datawarehouse solution.
    Oracle BI Applications:
    http://www.oracle.com/technology/products/bi/bi-applications.html
    Oracle BI EE is the new Business Intelligence Suite and is also the front-end to Oracle BI Applications.
    Oracle BI EE
    http://www.oracle.com/technology/products/bi/enterprise-edition.html
    The Fusion edition is an out-of-the-box solution on Oracle DBI with Oracle BI EE as front-end. As far as I know the Fusion edition has been replaced by Oracle BI Applications.
    Hope this helps.
    Cheers.
    Daan Bakboord

  • Adding Goods Receipt  batches dynamically when editing document ?

    Hi,
    Is it possible to add batches dynamically from SDK to an open and currently editing Goods Receipt PO?
    e.g, I would like to load batches from several xml-files and they must be validated and sometimes
    by hand connected to correct item-row at editing time. I'm opening a series of different forms
    to get the user to select valid xml-files and all that works fine. The problem comes first
    when to insert the batches into the current open document.
    Can I in some way load a SapbobuiCOM.Document from the open Form and
    add batches using the xxx.lines.BatchNumbers object?
    (it would be simple then)
    With regards,
    jonas

    Hi David!
    Thank's a lot for your answere!
    I probably had to do a new window for veryfing connected batches, which when
    form is saved as you said, updates the businessobject.
    Thank's!
    /jonas

  • BAPI_GOODSMVT_CREATE to create a material document for consumable goods

    Hi All,
    I am using a BAPi  (BAPI_GOODSMVT_CREATE) to create a material document using a PO. Please note that the PO contain no material number. It contains short text. The account assignment is being copied in to the MIGO from PO (when i am doing the process manually without BAPI). But when i am using the BAPI at that time i am getting an error as:
    E M7                   036 No goods receipt possible for purchase order 45XXXXXXXXXX 00010 .
    Logically this should not happen as  when i do it manually i am able to post MIGO.
    Under goods movement header i am giving :
    posting date
    doc date
    text
    goods movement code :
    01
    GOODSMVT_ITEM
    plant
    mov type
    po number
    vendor
    line item
    short text
    cost cenrtre
    order no(int ord no)
    mov indicator: B
    GL account
    base unit of measure
    Where i am going wrong?

    Hi Jurgen
    In response to my post where i wrote my observations :
    As you have suggested i have removed the account assignment objects and now i am not getting the error as mentioned in my post but at the same time i notice in export parameters  in the bapi the following things which was not present earlier.
    GOODSMVT_HEADRET                   50000xxxxx2014
    MATERIALDOCUMENT                    50000xxxxx
    MATDOCUMENTYEAR                     2014
    Now another thing is i am not getting any entry in return table.... which i should get. Please note that my test run contains no values(X).
    i think i am near to the solution. Could you suggest any more crucial points i might be missing?"
    for this i found out that there is a way to solve this issue. My concern was why the material document was not updating .  Well this is how SAP behaves.
    To update it we have to run simultaneously another fm " BAPI_TRANSACTION_COMMIT".  This will update it in the mseg table which in turn will reflect it PO history. So my requirement is answered and fulfilled.
    Thank you so much for the replies and cooperation.
    Thank you all.

  • Indesign 2014 CC,  epub3-file Ipad good, but  in Adobe Digital Editions bad

    From Indesign I generated an epub3-file with the latest release CC 2014. The resulting ebook is splendid on an iPad . However, to my surprise the performance in Adobe Digital Editions is very poor. The text appears far to big on the screen and can not be reduced in ADE. Is this a problem of ADE or of Indesign? Those anyone knows a solution to tackle this?

    In the meantime try Readium for Chrome…
    Or a Mac with OSX 9 and the iBooks app with that.
    Pigs, Gourds, and Wikis: Why iBooks for Mac Matters (Goodbye, PDF!)
    Uwe

Maybe you are looking for