Consuming Web Service in BizTalk
I am consuming asmx service in BizTalk.The schema generated by the web service does not have a proper structure .It has only any element .
The schema generated by web service is reference.xsd
<?xml version="1.0"?>
<xs:schema xmlns:tns="http://1e11afe9-f059-35cc-a0c3-b9aa38701c21/" elementFormDefault="qualified" targetNamespace="http://1e11afe9-f059-35cc-a0c3-b9aa38701c21/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="ArrayOfXmlNode" nillable="true" type="tns:ArrayOfXmlNode" />
<xs:complexType name="ArrayOfXmlNode">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="XmlNode" nillable="true">
<xs:complexType mixed="true">
<xs:sequence>
<xs:any />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:schema>
I can not use this schema to post the mssage to the web service .How do I generated the correct schema?Please advice .
Thanks in advance
Please refer below link
https://social.msdn.microsoft.com/Forums/en-US/6cff283b-e73e-4ffa-9894-276b99b9f0f6/how-to-comsume-asmx-webservice-in-biztalk?forum=biztalkgeneral
And diff ways to consume service
http://biztalkfundas.blogspot.com/2008/11/consuming-and-publishing-web-services.html
Similar Messages
-
Biztalk 2010 - Consume Web Service with Certificate
Hi
I have to consume a java web service with Biztalk that requires authentication via a client certificate. Until now I have not been able to consume any web service where any kind of authentication was needed. Simple web services without authentication are
no problem. Also using SoapUI works perfectly fine.
I am generating the XSDs and the port binding with the WCF wizard in VS2010. I've read several comments that it's not possible to consume web services with the WCF-WSHttp adapter when the message format should be SOAP 1.1. Therefore I'm trying with the WCF-BasicHttp
and WCF-Custom adapters, but I did not suceed in receiving a positive response yet.
The web service I want to consume uses a client certificate (with a private key) and two root certificates. When I use the BasicHttp adapter I choose either 'Transport' or 'TransportWithMessageCredential' but none of them work. I also have to supply a client
and a service certificate. I always use the one with the private key for the client but I'm not sure which one I have to use for the service. Is there a possibility that I have to provide both root certificates and if so, how can I achieve this?
Hope the question makes sense somehow... thanks for any input.
Error message that I receive currently is that the server needs a client certificate. However I attached it in the send port properties under the tab "Security" => mode "TransportWithMessageCredential".Adapter: WCF-Custom
Binding: customBinding
Cannot send pictures (yet).
<configuration>
<enterpriseLibrary.ConfigurationSource selectedSource="ESB File Configuration Source" />
<system.serviceModel>
<client>
<endpoint address="...." behaviorConfiguration="EndpointBehavior" binding="customBinding" bindingConfiguration="ReceiptBinding" contract="BizTalk" name="WebServicePort" />
</client>
<behaviors>
<endpointBehaviors>
<behavior name="EndpointBehavior">
<clientCredentials>
<clientCertificate findValue="..." x509FindType="FindByThumbprint" />
<serviceCertificate>
<defaultCertificate findValue="..." storeLocation="LocalMachine" storeName="AuthRoot" x509FindType="FindByThumbprint" />
</serviceCertificate>
</clientCredentials>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior" />
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<clear />
<binding name="ReceiptBinding">
<textMessageEncoding messageVersion="Soap11" />
<security authenticationMode="MutualCertificate" />
<httpsTransport proxyAuthenticationScheme="Basic" requireClientCertificate="true" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
</configuration> -
Best practice for consuming web services
Hi
we are consuming web service in orchestration by "Add Generated Item".By using this option it creates 1 orch,1xsd file and some bindings.
we have different projects for schemas,maps and orchestration under our solution in visual studio.
Now i need to know that what will be the best practice for consuming web service in orchestration i mean in which project should i use "add generated item" (in orchstration project or in schemas project) coz it generates both 1 orch and 1
schema.
thanksFrom a service orientation perspective you should abstract the service artifacts from the other artifacts. Otherwise it will be very difficult to update the service interface without affecting the other artifacts. For example you don't want to have to redeply
your entire application if only one field changes in the service you consume.
So I typically generate the items, remove the unnecessary stuff, and put them in a separate project.
Depending on the control you have over the services you want to consume, it would even be better to create another layer of abstraction. By that I mean create your own interface (schema) and map that one to the one the service exposes. This basically
is only necessary if you consume external services that are beyond your control. By abstracting the interface it exposes, you limit the impact of changes of that interface on the rest of your system. All changes are abstracted behind your own interface.
If you consume internal services, you can probably control the way the interface is defined. In a service oriented world all internal services expose a well known interface, based on the domain objects you have within your organisation.
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question. -
Issue with - Consume Web Services in a Messaging Only Scenario
Hello,
I am trying to consume a Oracle - SOA web service in BizTalk.
1. I followed the below MSDN post,
http://msdn.microsoft.com/en-us/library/aa560545%28v=bts.70%29.aspx
but I am getting "The custom tool 'BtsDiscoCodeGenerator' failed." error.
2. Tried another approach like the below blog
http://blogs.msdn.com/b/amantaras/archive/2010/03/03/consuming-a-web-service-in-a-non-orchestration-scenario.aspx
In this case, I am getting this error
"A message sent to adapter "SOAP" on send port "xxx" with URI "<<WSDL>>" is suspended.
Error details: Failed to serialize the message part "ProcessPOAck1" into the type "ProcessPOAckType" using namespace "xxx". Please ensure that the message part stream is created properly. "
I made sure there are no data type errors... I have copied the message to SoapUI and tested successfully. The message (output from BizTalk map) does not have soap envelop though. I had to copy
the message in
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" <<some name spaces>>
<soapenv:Header/>
<soapenv:Body>
</soapenv:Body>
</soapenv:Envelope>
tags to submit a request successfully.
Any help in this regard is greatly appreciated.
Thanks,
Venkat.Why are you using the SOAP adapter instead of the WCF Adapter? I think the only way to do that would be with some fairly heavy custom pipeline components.
Using the WCF Adapter, this is very easy - you just need to subscribe to the result message from the web service call - not a big deal, just play with the promoted properties and see what you have; normally SPName. This can be sent to a file location
with Overwrite set so that you never run out of disk space (if you don't care about the content response).
-Dan
If this answers your question, please Mark as Answer -
How to consume Web Service in ABAP WebDynpro
Hi
I want to know the entire details about how to consume Web Service in WebDynpro application.
regards
PiyushhI piyush,
Have a look at this Blog by Thomas Jung.
/people/thomas.jung/blog/2007/12/17/consuming-services-with-abap
on consuming webservies thru webdynpro ABAP
Cheers
Mary -
Windows authentification while consuming web service from ABAP
Hi All,
We are consuming web service from ABAP, we have created client proxy in SE80 and configured logical port in LPCONFIG.
This one was working fine. Now we have added windows user authentification to access this service.
Now when I'm trying to regenerate this proxy in R/3 it is asking for user and password. When I enter these details this one is not working.
If I access this service direcly from internet explorer and I enter same user and password then I would able to access this service.
Could you please let me know how to handle this.
Regards
VikramThe dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.
-
Consume web service in ABAP proxy with SOAP header
Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
ws_header TYPE REF TO if_wsprotocol_ws_header,
name TYPE string,
namespace TYPE string.
TRY.
CREATE OBJECT ref_stock
get WS_HEADER protocol
ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
DATA: ixml TYPE REF TO if_ixml,
xml_document TYPE REF TO if_ixml_document,
xml_root TYPE REF TO if_ixml_element,
xml_element TYPE REF TO if_ixml_element,
xml_node TYPE REF TO if_ixml_node.
DATA l_xstring TYPE xstring.
DATA l_string TYPE string.
FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
IF NOT l_string IS INITIAL.
create iXML DOM document from XML xstring
CALL FUNCTION 'SDIXML_XML_TO_DOM'
EXPORTING
xml = l_xstring
IMPORTING
document = xml_document
EXCEPTIONS
invalid_input = 1
OTHERS = 2.
IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
xml_root = xml_document->get_root_element( ).
xml_element ?= xml_root->get_first_child( ).
add header element by element to SOAP header
WHILE NOT xml_element IS INITIAL.
name = xml_element->get_name( ).
namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
IF NOT xml_element IS INITIAL.
ENDIF.
ws_header->set_request_header(
name = name
namespace = namespace
dom = xml_element ).
xml_element ?= xml_element->get_next( ).
ENDWHILE.
ENDIF.
ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
CALL METHOD ref_stock->get_stock_quotes
EXPORTING
get_quotes1 = get_quotes1
IMPORTING
get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha. -
Consuming web service in PI 7.3 and creating file
Hi,
I need to consume web service in PI 7.3 and create file from response. I have WSDL for the web service. Now confused about datatype/message type. Is there any document/note to follow?
thanks,
7ZI need to consume web service in PI 7.3 and create file from response. I have WSDL for the web service. Now confused about datatype/message type. Is there any document/note to follow?
==>
Hi,
There are 2 ways you can do this :-
If your sender is a file and receiver is a webservice and you want to map the response back to the file then :-
Sol 1 :- Async-Sync Bridge using RequesResponse Oneway bean
Sender File channel ---> Soap Receiver Channel
Soap Receiver Channel brings the response back to the File Receiver Channel.
Now this File Receiver Channel should be called inside the Sender File Channel using the above bean.
Data Type :
Src - File struc to SOAP request (WSDL used as an external definition)(mapping 1)
SOAP response(WSDL used as an external definition) to Tgt File Struc (mapping 2)
Sol 2 :- Async Scenario
Make a Sender File Channel --> use SOAP lookup channel (pass the request payload through the SOAP receiver channel) --> Map the response back to the File using File Receiver Channel.
Data Type:
Src - File struc to Tgt File Struc (mapping 1). Since you are passing the request payload through SOAP lookup in the UDF itself.
====================================================================== -
Consuming Web Services with ABAP - WSDL
Hi All,
I Want to consume web service in abap, i found lot of documents,Here i am having data in the internal table i need to pass
it to wsdl file, The Web Service or Proxy generates a WSDL file. So this WSDL file can be consumed on ABAP Front and Encrypt the Data that is to be sent to the Banks.
I found the input and output, Where i can find the method generated or we need to create it
CALL METHOD io_clientproxy->XXXXXXXXXXXX
please let me have your valuable ideas
Thanks in advance,
Arun.Hi Miguel,
I have not heared about SPROXY, Here i found some code,which calls a web service method and where it is from.
when i double click on my proxy it shows me some method.IF_PROXY_BASIS_INTERNAL~CREATE_FRAMEWORK
this is the one web service method. and i meed to pass the internal table data to WSDL file.
*-- create web service proxy class instance
TRY.
CREATE OBJECT io_clientproxy
EXPORTING
logical_port_name = 'LP4'.
CATCH cx_ai_system_fault.
ENDTRY.
*-- call web service methods
TRY.
CALL METHOD io_clientproxy->get_airport_information_by_is
EXPORTING
input = input
IMPORTING
output = output.
CATCH cx_ai_system_fault.
CATCH cx_ai_application_fault.
ENDTRY.
*-- text processing
output_string = output-get_airport_information_by_is.
REPLACE ALL OCCURRENCES OF
'<' IN output_string WITH '<' .
REPLACE ALL OCCURRENCES OF
'>' IN output_string WITH '>' .
REPLACE ALL OCCURRENCES OF
'xmlns=' IN output_string WITH 'xmlns:xsl=' .
*-- parsing
TRY .
CALL TRANSFORMATION ('Y_AIRPORT_XML2ABAP')
SOURCE XML output_string
RESULT outtab = outtab.
CATCH cx_xslt_exception INTO xslt_err.
DATA: s TYPE string.
s = xslt_err->get_text( ).
WRITE: ': ', s.
STOP.
ENDTRY .
Regards,
Arun. -
To consume web service in ABAP is it required that server should be XI.
Hi ,
I am trying to connect to a webservice from netweaver 7.0 systemand it gives an error " Not configured as integration engine". Is it required to have integration engine to consume web service.
SanjayHi Sanjay
You can consume webservices in ABAP but its better to use XI in mid to avoid point to point communication. Using XI you can have a central hub for all services you consume or publish
Check this link as well
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Thanks
Gaurav -
Code for consuming web services in ABAP
*& Report ZVM_GET_CITY_TIME
REPORT zvm_get_city_time.
PARAMETERS:
p_city TYPE zget_city_time_soap_in-city.
DATA:
cl_proxy TYPE REF TO zco_time_service_soap,
input TYPE zget_city_time_soap_in,
output TYPE zget_city_time_soap_out,
systerr TYPE REF TO cx_ai_system_fault,
w_error TYPE c.
TRY.
CREATE OBJECT cl_proxy
EXPORTING
logical_port_name = 'ZCO_TIME_SERVICE_SOAP'.
CATCH cx_ai_system_fault.
CREATE OBJECT systerr.
WRITE:/ 'Error in creating object - ', systerr->errortext.
ENDTRY.
TRY.
input-city = p_city.
CALL METHOD cl_proxy->get_city_time
EXPORTING
input = input
IMPORTING
output = output.
CATCH cx_ai_system_fault.
CREATE OBJECT systerr.
WRITE:/ 'Error in calling the method - ', systerr->errortext.
w_error = 'X'.
ENDTRY.
CHECK w_error NE 'X'.
SKIP.
WRITE:/ 'The current time in ', p_city, ' is ',
output-get_city_time_result.<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja -
Problem at Consume WEB Service in ABAP
hello!!
I tell them my problem, is to create a web service from the SE80, which could be used properly.
Then there was a change of server, which migrated to the developments and the web service is recreation, but this can not be consumed.
now I need help, is where do I indicate that the basis so that they can return to consume web services, what services or settings should be activated.
any suggestion or help are welcome.
The ECC system is a 5 AS ABAP only.
from now, I appreciate any help or guidance I can get.What is the problem? Are all the services active in SICF for web services and how is the web service being consumed is it through a wsdl file ?
-
Problem when consuming web service on WIndows authentication applcation
Hi,
I am having a tough time in consuming web services on a
Windows authentication IIS server.
In one of my application I have created web services and
consuming those web services from my another application.
If I turned off the Windows authentication everything works
fine, but If I turned on the Windows authentication web services
stop working.
Has anyone encountered such error while working with web
services on Windows authentication server.
Attach Code
Could not perform web service invocation "funGetCustomer".
Here is the fault returned when invoking the web service
operation:
AxisFault
faultCode: {
http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (401)Unauthorized
faultActor:
faultNode:
faultDetail:
{}:return code: 401
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "
http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>You are not authorized
to view this page</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html;
charset=Windows-1252">
<STYLE type="text/css">
BODY { font: 8pt/12pt verdana }
H1 { font: 13pt/15pt verdana }
H2 { font: 8pt/12pt verdana }
A:link { color: red }
A:visited { color: maroon }
</STYLE>
</HEAD><BODY><TABLE width=500 border=0
cellspacing=10><TR><TD>
<h1>You are not authorized to view this page</h1>
You do not have permission to view this directory or page
using the credentials that you supplied because your Web browser is
sending a WWW-Authenticate header fi...You could try switching the HTTP transport provided in the
Apache Axis embedded in ColdFusion to "CommonsHTTPSender".
See this blog post:
http://tjordahl.blogspot.com/2007/03/apache-axis-and-commons-httpclient.html -
Consuming Web Services in 11.2 does not work (UTL_DBWS)
Hello
i read some documents for consuming web services on the internet , but i get an error when i call add_numbers function as follows:
i connected on WSUSER , then
SQL> select add_numbers(1,3) from dual;
The Error message is:
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IllegalAccessException: java.lang.ExceptionInInitializerError
ORA-06512: at "WSUSER.UTL_DBWS", line 193
ORA-06512: at "WSUSER.UTL_DBWS", line 190
ORA-06512: at "WSUSER.ADD_NUMBERS", line 25"
I use the following steps to setup the UTL_DBWS :
1- Create new user 'WSUSER'
2- Run the UTL_DBWS scripts ( utl_dbws_decl.sql , utl_dbws_body.sql) on WSUSER.
3- Execute this command
loadjava -u scott/tiger -r -v -f -genmissing dbwsclientws.jar dbwsclientdb11.jar
4- Log in as sys and grant these privileges to our new user:
execute dbms_java.grant_permission('WSUSER','SYS:java.util.PropertyPermission','http.proxySet','write');
execute dbms_java.grant_permission('WSUSER','SYS:java.util.PropertyPermission','http.proxyHost', 'write');
execute dbms_java.grant_permission('WSUSER','SYS:java.util.PropertyPermission','http.proxyPort', 'write');
execute dbms_java.grant_permission('WSUSER','SYS:java.lang.RuntimePermission', 'accessClassInPackage.sun.util.calendar','');
execute dbms_java.grant_permission('WSUSER','SYS:java.lang.RuntimePermission','getClassLoader','');
execute dbms_java.grant_permission('WSUSER','SYS:java.net.SocketPermission','*','connect,resolve');
execute dbms_java.grant_permission('WSUSER','SYS:java.util.PropertyPermission','*','read,write');
execute dbms_java.grant_permission('WSUSER','SYS:java.lang.RuntimePermission','setFactory','');
execute dbms_java.grant_permission('WSUSER','SYS:java.lang.RuntimePermission', 'createClassLoader', '' )
5- Create add_numbers function on wsuser to test utl_dbws:
CREATE OR REPLACE FUNCTION add_numbers (p_int_1 IN NUMBER,
p_int_2 IN NUMBER)
RETURN NUMBER
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return NUMBER;
BEGIN
l_wsdl_url := 'http://www.oracle-base.com/webservices/server.php?wsdl';
l_namespace := 'http://www.oracle-base.com/webservices/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'Calculator');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'CalculatorPort');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'ws_add');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<ws_add xmlns="' || l_namespace || '">
<int1>' || p_int_1 || '</int1>
<int2>' || p_int_2 || '</int2>
</ws_add>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//return/text()').getNumberVal();
RETURN l_return;
END;
6- Test the function
Select add_numbers(1,2) from dual
on the test i get the error message :
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IllegalAccessException: java.lang.ExceptionInInitializerError
ORA-06512: at "WSUSER.UTL_DBWS", line 193
ORA-06512: at "WSUSER.UTL_DBWS", line 190
ORA-06512: at "WSUSER.ADD_NUMBERS", line 25
anyone have an idea to resolve this error .
thanks alotHi.
Looking at the code, it seems it is my article you are asking about.
http://www.oracle-base.com/articles/10g/utl_dbws10g.php
I've just run through it on an 11.2 instance and it works fine for me.
Make sure your server has access to the Internet and make sure the java classes are loaded successfully.
Cheers
Tim... -
How to consume Web Services form ABAP ?
Hi,
Please advise how to consume web services from ABAP Code ? is there any automatic generating proxy class in order to consume web services ?
I am using NW 7.0 SP15
Thank You and Best Regards
Fernand LesmanaHi Fernand,
chk out for this link
Consume an ABAP Webservice (WAS 620) from .Net
Send SMS to India from ABAP
working web service from ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
Regards
Sampath
Maybe you are looking for
-
Font embedding problem when re-saving pdfs in Preview
I love the new features in Preview. Especially, being able to reshuffle pages and to be able to add and delete pages to documents, and the improved annotation features. This is what I did and encountered this problem. I have a pdf that I annotated an
-
Getting time_out Error in report bcos of SQL Statement!
Hi Experts, I am getting Time_out error in my big program because of Select statement.I have checked in SQL Trace AND fuond the message "SQL0104N An unexpected token "vakey" was found following "umh kschl". Expected tokens may include: ",". S
-
[Flash CS3] Resolution Issues
Hello, I've been trying to piece together a FLA for the past few days now, only to encounter problem after problem. I've managed to overcome all but one problem I have been experiencing in Adobe Flash CS3 Professional, being a resolution problem. I'v
-
I get error message each time I try to retrieve image (BLOB) from Oracle
Can anyone help me? I am working with Servlet and JDBC with Oracle database. I can insert an image (GIF file) in a Oracle table in a BLOB field. But everytime I want to retrieve it I got an error "AbstractMethodError". My retrieve program (only the m
-
Firefox not loading certain wepbage elements
Facebook and Lifehacker/Gizmodo sites are having issues in Firefox, I want to fix it because Chrome is a battery hog on my Mac. This is the third time I've reset the Fox, but certain webpage elements just don't work anymore. I installed flash player