Consuming web service in portal

Hi all,
I had a web service now i want to use it in my portal.
Can anyone help me in this regard.

Hi Lokesh,
To consume a Web service, you can create a deployable or a standalone proxy for the Web service in the SAP NetWeaver Developer Studio using a WSDL document as a basis. This can be done with just a few mouse clicks.
The difference between a deployable and a standalone proxy is that, for a deployable proxy, the application of the Web service client must be deployed on the J2EE engine. A standalone proxy can be executed without the J2EE engine.
The role of the Web service client developer has been created so that Web services can be consumed.
The Web service client developer has the task of integrating a Web service in an application. He or she knows the specific requirements for the Web service and creates the Web service client proxy definition. Afterwards, the developer programs the client application using the service endpoint interface.
Please read through this Step by Step approach for same:-
[Consume WebServices in Portal|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2188ae5-0601-0010-dd93-c23e381ef41e]
Hope this helps,
Regards,
Shailesh

Similar Messages

Error while consuming web service in portal component

Hi All,
I am working on a portal application which uses web services in portal component via web service.
I have tested the web service and then creted a relevant portal service to it .When using this portal service in the portal component and running it Im getting the following run time error
Portal Runtime Error
An exception occurred while processing a request for :
iView : Test_portal_service_app.Test_portal_service_app
Component Name : Test_portal_service_app.Test_portal_service_app
com.sap.portal.ivs.global.ume.UMECLient.
Exception id: 11:17_03/07/08_0028_2739150
See the details for the exception ID in the log file
I did not use any ume attributes or ume api methods in the portal component .
I have also added sharingreference= portalserviceapplication name in deploymentdescriptor of the portal application which has the portal component.
Please provide any suggestion for the possible cause of error .
Urgent!!!!
Thanks.

Hi all,
Please throw some light into this issue i am getting the following exception.
com.sap.engine.services.webservices.jaxm.soap.accessor.NestedSOAPException: Problem in server response: Proxy Authentication Required.
I have given the proxy settings in the com.sap.portal.ivs.httpservice in the portal and also
defined a proxy server in the Visual Administrator under Services -> Webservice Container -> HTTP Proxy Server
I am calling service in the following manner.
IPortalRuntimeResources runtime = PortalRuntime.getRuntimeResources();
   IService service = runtime.getService(IWS_P_Service.KEY);
   IWS_P_Service ws_service = (IWS_P_Service)service;
    Volumes from = new Volumes(Volumes.VOLUMES_KILOLITER_VALUE);
    Volumes to = new Volumes(Volumes.VOLUMES_LITER_VALUE);
    ChangeVolumeUnit cvu = new ChangeVolumeUnit(1200,from,to);
    // working upto here
     response.write("working");
     ChangeVolumeUnitResponse cvu_res = ws_service.ChangeVolumeUnit(cvu);
     double result = cvu_res.getChangeVolumeUnitResult();
     response.write(result+"");
It is working upto "working".
If any body has any solutions please post.
Thanks

How to consume Web Services form ABAP ?

Hi,
Please advise how to consume web services from ABAP Code ? is there any automatic generating proxy class in order to consume web services ?
I am using NW 7.0 SP15
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
chk out for this link
Consume an ABAP Webservice (WAS 620) from .Net
Send SMS to India from ABAP
working web service from ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a4433436-0301-0010-f2a9-9281ad574054
Regards
Sampath

Consume WEB Service in ABAP

HI
I am consuming web service WSDL file in ABAP using client proxy concept. But every time i execute the program system is
asking for portal user name and pwd. where can i put user name an pwd so that system can take it directly from there
during run time.
Regards,
Shyam.

Yes,
There is a place in SOAMANAGER to put userid and pwd for portal user. and this works.
Thanks,
Shyam

How to consume Web Service in ABAP WebDynpro

Hi
I want to know the entire details about how to consume Web Service in WebDynpro application.
regards
Piyush

hI piyush,
Have a look at this Blog by Thomas Jung.
/people/thomas.jung/blog/2007/12/17/consuming-services-with-abap
on consuming webservies thru webdynpro ABAP
Cheers
Mary

Best practice for consuming web services

Hi
we are consuming web service in orchestration by "Add Generated Item".By using this option it creates 1 orch,1xsd file and some bindings.
we have different projects for schemas,maps and orchestration under our solution in visual studio.
Now i need to know that what will be the best practice for consuming web service in orchestration i mean in which project should i use "add generated item" (in orchstration project or in schemas project) coz it generates both 1 orch and 1
schema.
thanks

From a service orientation perspective you should abstract the service artifacts from the other artifacts. Otherwise it will be very difficult to update the service interface without affecting the other artifacts. For example you don't want to have to redeply
your entire application if only one field changes in the service you consume.
So I typically generate the items, remove the unnecessary stuff, and put them in a separate project.
Depending on the control you have over the services you want to consume, it would even be better to create another layer of abstraction. By that I mean create your own interface (schema) and map that one to the one the service exposes. This basically
is only necessary if you consume external services that are beyond your control. By abstracting the interface it exposes, you limit the impact of changes of that interface on the rest of your system. All changes are abstracted behind your own interface.
If you consume internal services, you can probably control the way the interface is defined. In a service oriented world all internal services expose a well known interface, based on the domain objects you have within your organisation.
Jean-Paul Smit | Didago IT Consultancy
Blog |
Twitter | LinkedIn
MCTS BizTalk 2006/2010 + Certified SOA Architect
Please indicate "Mark as Answer" if this post has answered the question.

Windows authentification while consuming web service from ABAP

Hi All,
We are consuming web service from ABAP, we have created client proxy in SE80 and configured logical port in LPCONFIG.
This one was working fine. Now we have added windows user authentification to access this service.
Now when I'm trying to regenerate this proxy in R/3 it is asking for user and password. When I enter these details this one is not working.
If I access this service direcly from internet explorer and I enter same user and password then I would able to access this service.
Could you please let me know how to handle this.
Regards
Vikram

The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.

Consume web service in ABAP proxy with SOAP header

Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
      ws_header TYPE REF TO if_wsprotocol_ws_header,
      name TYPE string,
      namespace TYPE string.
TRY.
    CREATE OBJECT ref_stock
get WS_HEADER protocol
    ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
    DATA: ixml TYPE REF TO if_ixml,
          xml_document TYPE REF TO if_ixml_document,
          xml_root TYPE REF TO if_ixml_element,
          xml_element TYPE REF TO if_ixml_element,
          xml_node TYPE REF TO if_ixml_node.
    DATA l_xstring        TYPE xstring.
    DATA l_string         TYPE string.
    FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
    CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
    l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
    IF NOT l_string IS INITIAL.
    create iXML DOM document from XML xstring
      CALL FUNCTION 'SDIXML_XML_TO_DOM'
        EXPORTING
          xml           = l_xstring
        IMPORTING
          document      = xml_document
        EXCEPTIONS
          invalid_input = 1
          OTHERS        = 2.
      IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
        xml_root = xml_document->get_root_element( ).
        xml_element ?= xml_root->get_first_child( ).
      add header element by element to SOAP header
        WHILE NOT xml_element IS INITIAL.
          name = xml_element->get_name( ).
          namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
          IF NOT xml_element IS INITIAL.
          ENDIF.
          ws_header->set_request_header(
                      name = name
                      namespace = namespace
                      dom = xml_element ).
          xml_element ?= xml_element->get_next( ).
        ENDWHILE.
      ENDIF.
    ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
    CALL METHOD ref_stock->get_stock_quotes
      EXPORTING
        get_quotes1 = get_quotes1
      IMPORTING
        get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.

Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha.

Consuming web service in PI 7.3 and creating file

Hi,
I need to consume web service in PI 7.3 and create file from response. I have WSDL for the web service. Now confused about datatype/message type. Is there any document/note to follow?
thanks,
7Z

I need to consume web service in PI 7.3 and create file from response. I have WSDL for the web service. Now confused about datatype/message type. Is there any document/note to follow?
==>
Hi,
There are 2 ways you can do this :-
If your sender is a file and receiver is a webservice and you want to map the response back to the file then :-
Sol 1 :- Async-Sync Bridge using RequesResponse Oneway bean
Sender File channel ---> Soap Receiver Channel
Soap Receiver Channel brings the response back to the File Receiver Channel.
Now this File Receiver Channel should be called inside the Sender File Channel using the above bean.
Data Type :
Src - File struc to SOAP request (WSDL used as an external definition)(mapping 1)
SOAP response(WSDL used as an external definition) to Tgt File Struc (mapping 2)
Sol 2 :- Async Scenario
Make a Sender File Channel --> use SOAP lookup channel (pass the request payload through the SOAP receiver channel) --> Map the response back to the File using File Receiver Channel.
Data Type:
Src - File struc to Tgt File Struc (mapping 1). Since you are passing the request payload through SOAP lookup in the UDF itself.
======================================================================

Consuming Web Services with ABAP - WSDL

Hi All,
I Want to consume web service in abap, i found lot of documents,Here i am having data in the internal table i need to pass
it to wsdl file, The Web Service or Proxy generates a WSDL file. So this WSDL file can be consumed on ABAP Front and Encrypt the Data that is to be sent to the Banks.
I found the input and output, Where i can find the method generated or we need to create it
CALL METHOD io_clientproxy->XXXXXXXXXXXX
please let me have your valuable ideas
Thanks in advance,
Arun.

Hi Miguel,
I have not heared about SPROXY, Here i found some code,which calls a web service method and where it is from.
when i double click on my proxy it shows me some method.IF_PROXY_BASIS_INTERNAL~CREATE_FRAMEWORK
this is the one web service method. and i meed to pass the internal table data to WSDL file.
*-- create web service proxy class instance
TRY.
    CREATE OBJECT io_clientproxy
      EXPORTING
        logical_port_name = 'LP4'.
CATCH cx_ai_system_fault.
ENDTRY.
*-- call web service methods
TRY.
    CALL METHOD io_clientproxy->get_airport_information_by_is
      EXPORTING
        input = input
      IMPORTING
        output = output.
CATCH cx_ai_system_fault.
CATCH cx_ai_application_fault.
ENDTRY.
*-- text processing
output_string = output-get_airport_information_by_is.
REPLACE ALL OCCURRENCES OF
    '<' IN output_string WITH '<' .
REPLACE ALL OCCURRENCES OF
'>' IN output_string WITH '>' .
REPLACE ALL OCCURRENCES OF
'xmlns=' IN output_string WITH 'xmlns:xsl=' .
*-- parsing
TRY .
    CALL TRANSFORMATION ('Y_AIRPORT_XML2ABAP')
            SOURCE XML output_string
            RESULT     outtab = outtab.
CATCH cx_xslt_exception INTO xslt_err.
    DATA: s TYPE string.
    s = xslt_err->get_text( ).
    WRITE: ': ', s.
    STOP.
ENDTRY .
Regards,
Arun.

To consume web service in ABAP is it required that server should be XI.

Hi ,
I am trying to connect to a webservice from netweaver 7.0 systemand it gives an error " Not configured as integration engine". Is it required to have integration engine to consume web service.
Sanjay

Hi Sanjay
You can consume webservices in ABAP but its better to use XI in mid to avoid point to point communication. Using XI you can have a central hub for all services you consume or publish
Check this link as well
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Thanks
Gaurav

Code for consuming web services in ABAP

*& Report ZVM_GET_CITY_TIME
REPORT zvm_get_city_time.
PARAMETERS:
p_city TYPE zget_city_time_soap_in-city.
DATA:
cl_proxy TYPE REF TO zco_time_service_soap,
input    TYPE zget_city_time_soap_in,
output   TYPE zget_city_time_soap_out,
systerr TYPE REF TO cx_ai_system_fault,
w_error TYPE c.
TRY.
    CREATE OBJECT cl_proxy
      EXPORTING
        logical_port_name = 'ZCO_TIME_SERVICE_SOAP'.
CATCH cx_ai_system_fault.
    CREATE OBJECT systerr.
    WRITE:/ 'Error in creating object - ', systerr->errortext.
ENDTRY.
TRY.
    input-city = p_city.
    CALL METHOD cl_proxy->get_city_time
      EXPORTING
        input = input
      IMPORTING
        output = output.
CATCH cx_ai_system_fault.
    CREATE OBJECT systerr.
    WRITE:/ 'Error in calling the method - ', systerr->errortext.
    w_error = 'X'.
ENDTRY.
CHECK w_error NE 'X'.
SKIP.
WRITE:/ 'The current time in ', p_city, ' is ',
        output-get_city_time_result.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

Problem at Consume WEB Service in ABAP

hello!!
I tell them my problem, is to create a web service from the SE80, which could be used properly.
Then there was a change of server, which migrated to the developments and the web service is recreation, but this can not be consumed.
now I need help, is where do I indicate that the basis so that they can return to consume web services, what services or settings should be activated.
any suggestion or help are welcome.
The ECC system is a 5 AS ABAP only.
from now, I appreciate any help or guidance I can get.

What is the problem? Are all the services active in SICF for web services and how is the web service being consumed is it through a wsdl file ?

Problem when consuming web service on WIndows authentication applcation

Hi,
I am having a tough time in consuming web services on a
Windows authentication IIS server.
In one of my application I have created web services and
consuming those web services from my another application.
If I turned off the Windows authentication everything works
fine, but If I turned on the Windows authentication web services
stop working.
Has anyone encountered such error while working with web
services on Windows authentication server.
Attach Code
Could not perform web service invocation "funGetCustomer".
Here is the fault returned when invoking the web service
operation:
AxisFault
faultCode: {
http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (401)Unauthorized
faultActor:
faultNode:
faultDetail:
{}:return code: 401
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "
http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>You are not authorized
to view this page</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html;
charset=Windows-1252">
<STYLE type="text/css">
BODY { font: 8pt/12pt verdana }
H1 { font: 13pt/15pt verdana }
H2 { font: 8pt/12pt verdana }
A:link { color: red }
A:visited { color: maroon }
</STYLE>
</HEAD><BODY><TABLE width=500 border=0
cellspacing=10><TR><TD>
<h1>You are not authorized to view this page</h1>
You do not have permission to view this directory or page
using the credentials that you supplied because your Web browser is
sending a WWW-Authenticate header fi...

You could try switching the HTTP transport provided in the
Apache Axis embedded in ColdFusion to "CommonsHTTPSender".
See this blog post:
http://tjordahl.blogspot.com/2007/03/apache-axis-and-commons-httpclient.html

Biztalk 2010 - Consume Web Service with Certificate

Hi
I have to consume a java web service with Biztalk that requires authentication via a client certificate. Until now I have not been able to consume any web service where any kind of authentication was needed. Simple web services without authentication are
no problem. Also using SoapUI works perfectly fine.
I am generating the XSDs and the port binding with the WCF wizard in VS2010. I've read several comments that it's not possible to consume web services with the WCF-WSHttp adapter when the message format should be SOAP 1.1. Therefore I'm trying with the WCF-BasicHttp
and WCF-Custom adapters, but I did not suceed in receiving a positive response yet.
The web service I want to consume uses a client certificate (with a private key) and two root certificates. When I use the BasicHttp adapter I choose either 'Transport' or 'TransportWithMessageCredential' but none of them work. I also have to supply a client
and a service certificate. I always use the one with the private key for the client but I'm not sure which one I have to use for the service. Is there a possibility that I have to provide both root certificates and if so, how can I achieve this?
Hope the question makes sense somehow... thanks for any input.
Error message that I receive currently is that the server needs a client certificate. However I attached it in the send port properties under the tab "Security" => mode "TransportWithMessageCredential".

Adapter: WCF-Custom
Binding: customBinding
Cannot send pictures (yet).
<configuration>
<enterpriseLibrary.ConfigurationSource selectedSource="ESB File Configuration Source" />
<system.serviceModel>
<client>
<endpoint address="...." behaviorConfiguration="EndpointBehavior" binding="customBinding" bindingConfiguration="ReceiptBinding" contract="BizTalk" name="WebServicePort" />
</client>
<behaviors>
<endpointBehaviors>
<behavior name="EndpointBehavior">
<clientCredentials>
<clientCertificate findValue="..." x509FindType="FindByThumbprint" />
<serviceCertificate>
<defaultCertificate findValue="..." storeLocation="LocalMachine" storeName="AuthRoot" x509FindType="FindByThumbprint" />
</serviceCertificate>
</clientCredentials>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior" />
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<clear />
<binding name="ReceiptBinding">
<textMessageEncoding messageVersion="Soap11" />
<security authenticationMode="MutualCertificate" />
<httpsTransport proxyAuthenticationScheme="Basic" requireClientCertificate="true" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
</configuration>

Consuming web service in portal

Similar Messages

Maybe you are looking for