Consumo traffico dati con wi-fi acceso

Consumo traffico internet (3G) con operatore TRE con wi-fi acceso!

Riavviare il router WiFi rimuovendo il potere ad esso per 30 secondi.

Similar Messages

Il wi-fi funziona ma non naviga in internet e blocca anche il traffico dati della scheda, cosa può essere successo? Ho fatto già tutte le prove di ripristino ma non è successo nulla

Il wi-fi funziona ma non naviga in internet e blocca anche il traffico dati della scheda, cosa può essere successo? Ho fatto già tutte le prove di ripristino ma non è successo nulla!!

Riavviare il router WiFi rimuovendo il potere ad esso per 30 secondi.

Come disattivare i comandi dati con trova iphone

Come si possono disattivare i comandi dati con trova iphone?

Google translate:
I bought a new ipod. than the previous one I did was back up to icloud on both my computers. now, on my iphone backup exists in icloud my ipod, while the new ipod can not find it when I start ... and my computer gives me as the last backup an old backup that really is not the last .. how do I recover my data?
The following includes how to restore from iCloud backup.
iOS: How to back up
All all the devices using the same iCloud account? If so go to Settings>iCloud>Storage and Backup>Manage Storage is an iPod backup listed?

Consumo eccessivo dati cellulare

Buongiorno, c'è qualcuno che ha il mio stesso problema? Ho l'iPhone che continua a scaricare dati con la rete cellulare, anche se sono sotto wi-fi, ma tra l'utilizzo che posso controllare nelle impostazioni non ci sono app che consumano e neanche servizi. Come posso controllare cosa sta scaricando?

Aggiornamento della mia situazione:
mi hanno restituito l'iPad ed il problema si è ripresentato, quando passa da 3G a Edge o comunque in presenza di scarso campo, cioè non switchando da wifi.
Ho fatto resettare la sim dalla Tim ( anche se non aveva mai dato problemi con l'altro iPad ) ed il problema si è ripresentato.
Ho fatto un ripristino totale da iTunes com NUOVO dispositivo ( senza cioè ripristinare da backup ) ed il problema si è ripresentato.
Ho riportato l'iPad al premium reseller dal quale l'ho acquistato, pregando il commesso di aiutarmi a spiegare bene a quelli del laboratorio in cosa consiste il problema.
Se ne riparla la prossima settimana.

Non funziona traffico voce, solo trattico dati

Da questa mattina, senza aver effettuato alcun aggiornamento, non riesco più nè a ricevere nè ad effettuare chiamate, ma il traffico dati funziona perfettamente.
Ho provato di tutto, ho ripristinato le impostazioni di rete e come ultimo tentativo ho eseguito un ripristino come nuovo, ma il tutto senza successo.
L'operatore è Tim, ma il problema non sono loro, se metto la sim in un altro telefono funziona.

Stessa cosa. Inoltre quando apro Safari (per esempio) il software non risponde fino a quando non ne apro un altro. Non so se le cose sono collegate. La cosa strana è che ho usato il mac tutto il giorno e l'ho solo messo in stop prima di avere questi problemi. Ovviamente ora ho già riavviato un paio di volte ma niente di fatto.
Potete aiutarci?
grazie
Matteo

Impossibile effettuare l'accesso a causa di un problema di comunicazione con iCloud.

Impossibile effettuare l'accesso a causa di un problema di comunicazione con iCloud. Non riconosce ID apple e password

Ciao, anche io avevo lo stesso problema e la causa è la connesione internet fornita dalla vodafone attraverso connessione hspa (traffico dati mobile). Leggendo un pò le varie discussioni l'unica soluzione che si possa considerare tale è questa:
1- scarica e installa l'applicazione hotspot shield (io ho preso il free)(nel sito ti spiega il suo preciso funzionamento cmq ti crea al volo una connessione vpn senza che tu debba impostare nulla sul mac)
2-una volta installata avvia l'aplicazione (ti apre il browser di default)
3- apri il mac app store e tutto funzionerà perfettamente (almeno me lo auguro per te )

Stored procedure which returns date error

if have a function getGmtDate in the package pa which uses a date as parameter and returns a date
conn.Connect()
strSQL = "pa.getGmtDate"
P_RETURN As New OracleParameter(":pRETURN", OracleDbType.Date, ParameterDirection.ReturnValue)
Dim P_DATE As New OracleParameter(":pDATE", OracleDbType.Date, 0, ParameterDirection.Input)
P_DATE.Value = Now 'current date
Dim cmd As New OracleCommand(strSQL, conn.getConnection)
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add(P_RETURN)
cmd.Parameters.Add(P_DATE)
cmd.ExecuteNonQuery()
dim returnValue as Date = P_RETURN.Value
and the date is retrieved correct from the db, but when I want to bind the resultdate to a variable then it throws an exception:
Cast from type 'OracleDate' to type 'Date' is not valid
can anyone help me?

1) Create CallableStatement
2) For each of returning value you have to call RegisterOutParameter()
3) For others user setXXX() method depending on type of parameter
4) call
5) use vars registered through RegisterOutParameter() - all your values should be there
Pavel

HT3275 The backup disk image "/Volumes/Data/iMac.sparsebundle" is already in use.

The backup disk image “/Volumes/Data/Connie’s iMac.sparsebundle” is already in use. Time Machine has stopped backing up. I deleted the selected disc and re-selected which one to use. Not sure what else to do.

Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back into the Time Capsule
Count to 45 to allow the Time Capusle to fully restart
Report on your results

Example of cons. in BCS

Hello!
Recently I began to work with SEM BCS. Before I worked with BW. So I decided to do demo example. I have IDES BW/SEM. So I wanted to get a consolidation of balances of some enterprises in different regions belongs to one company. And I decide to: create hierarchy like this (enterprise - region - daughter enterprises); create a task with flexible uplaod method to load a data and create several task like bal. carryforward & period initialization and interunit eliminations for example. I created an hierarchy (master data - cons. units - company) but I do not see it in monitor of cons. And for task with flexible upload method I assigned cons frequecy monthly. But in the monitor of cons. is error thats no cons frequency assigned. How can I adjust my system to work well? Please give me some advices or any suggestions about that. I use sap presentation SEM240 and help, but it is hard to understand for the first time) Thaks very much anyway...

Hi,
pls chk this link for example;
http://help.sap.com/saphelp_sem60/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Hope this helps,
Regards
CSM Reddy

Web.xml jdbc data connection

Could someone post a code snippit (or direct me to a link) that would show me the correct way to setup a data connection in a web.xml file? Could you also show me how to use that data conn in a jsp file? I am currently connecting to my database on every page.
Thanks

You need to add this to your web.xml:
    <resource-ref>
        <description>Your datasource description</description>
        <res-ref-name>jdbc/YourDatasourceName</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>You'll need to make a Resource to your Context:
    <Resource   name="jdbc/YourDatasourceName"
                auth="Container"
                type="javax.sql.DataSource"/>

    <ResourceParams name="jdbc/YourDatasourceName">
        <parameter>
            <name>factory</name>            <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
        </parameter>
        <parameter>
            <name>driverClassName</name>
            <value>oracle.jdbc.driver.OracleDriver</value>
        </parameter>
        <parameter>
            <name>url</name>
            <value>jdbc:oracle:thin:@elvis:1521:CAPP</value>
        </parameter>
        <parameter>
            <name>username</name>
            <value>api</value>
        </parameter>
        <parameter>
            <name>password</name>
            <value>mod</value>
        </parameter>
        <parameter>
            <name>maxActive</name>
            <value>20</value>
        </parameter>
        <parameter>
            <name>maxIdle</name>
            <value>0</value>
        </parameter>
        <parameter>
            <name>maxWait</name>
            <value>60000</value>
        </parameter>
        <parameter>
            <name>removeAbandoned</name>
            <value>true</value>
        </parameter>
        <parameter>
            <name>removeAbandonedTimeout</name>
            <value>300</value>
        </parameter>
    </ResourceParams>Make sure you get the Jakarta Commons JARs and your JDBC driver JARs and put them where all apps can see them (TOMCAT_HOME/common/lib for me):
commons-beanutils.jar
commons-dbcp.jar
commons-lang-1.0.1.jar
commons-logging-api.jar
commons-pool.jar
This will be the default data source for the application that all JSPs will be able to see. If you use JSTL, it's really easy. - MOD

How can I monitor the active access point + data c...

My privider (o2 Germany) requires me to use different access points (APN, proxy) on my phone (N80) depending on the type of browsing I want do do (WAP vs. "normal" access), and each of them has a "high cost trap" if I use the wrong one for the particular service.
Very annoying - up to the point that I consider not using the phone for online access at all because I'm so scared to run into uncontrollably high fees.
Anyways. I wonder if there is add-on software for my phone that helps me monitor my data connection, i.e.:
* show me the currently used access point at the top of the display (yes, I know I can go into some deep menus to look it up, but that's not very helpful or even easy to use)
* automatically disconnect when the conn is idle for a while (One of the data modes is time-based, meaning I do not want to have it open all the time by accident)
Currently, all I can see at the top of the display is that I have a data connection at all, but that does not give me enough information to know I'm in the right mode for what I'm doing.
Thomas

You can force a disconnect by pressing the red/hangup key for a couple of seconds when the phone is in the standby state.
And in menu > Tools > Settings > Connection > Packet data change the setting "Packet data conn." to "When needed" and leave the "Access point" setting there to "None".
When you or apps on your phone are not doing any data transfer, then regardless of whether it is a WAP or "full" Internet packet data connection, you should not cumulate any charges.
You can also move the Connection Manager app from the Tools submenu to the main menu, or even to the Active standby apps list (or the softkeys) for quicker access. No need to deep dive into menus for it then.
And for individual apps, you can usually set the default access point to whatever is best to use for that particular app. For the browsers ("Web" and "Services") you can also make them ask you to pick the access point every time you connect.

Master data templete

Hi All,
I am newly move to ISU from SD, and was trying to configure Master Data Templete in ISU but not able to do it
Can any one please help me with a document how to create Master data templete in ISU,
Thanks and Regards

MDTs are mostly used for Master Data creation which includes Business Master data (Business Partner and contract account) and Technical Master data (Conn Obj, Premise, installation , etc ).
[Creation Steps:.|http://sapro.blogspot.com/2008/07/isu-master-data-template-how-to-create.html]
Further, typically, the master data is created during Move-in process in IS-U module.
In the latest version of IS-U i.e ECC 6.0,. the MDTs are called from Park document, whcih is used for move-in/move-out process with ISU. If you are using latest version of CRM (Web IC) then the Park document screen are ready available in CRM so you directly create park doc in ISU via CRM, which further triggers the MDTs during move-in. If you are using CRM version 5 or below then MDT is called from CRM middleware.
Eitherway you need create MDTs based on your requirement atleast one with category BPARTNER (for BP and CA) and one with category CRMNEWCONTRACT for new move-in contract.
Regards,
Siva

Upload data in excel sheet through BDC

Dear all,
How do we upload data in excel sheet through BDC?
Thanks in advance.
Regards,
Sandra.

Hi,
     The sample code is as given below:
REPORT upload_supply_area.
*include for dispaying icons in error log
INCLUDE <icon>.
*Declaration of structure.
TYPES:BEGIN OF x_struct,
      werks TYPE v_pvbe-werks,          "Plant
      prvbe TYPE v_pvbe-prvbe,          "Supply Area
      pvbtx TYPE v_pvbe-pvbtx,          "Production supply area description
      lgort TYPE v_pvbe-lgort,          "Storage Location
      rgver TYPE v_pvbe-rgver,          "Person responsible for one or more supply areas
      END OF x_struct.
TYPES:BEGIN OF x_messages,
       msgtyp(1) type c,
       werks TYPE v_pvbe-werks,          "Plant
       prvbe TYPE v_pvbe-prvbe,          "Supply Area
       message(120) type c,
       END OF x_messages.
DATA: it_messages TYPE STANDARD TABLE OF x_messages .
DATA: wa_messages TYPE x_messages.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll,
     wa_msgtab TYPE bdcmsgcoll.
*internal table for BDC
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata.
DATA: wa_bdcdata TYPE bdcdata.
DATA:it_file TYPE STANDARD TABLE OF x_struct.        "internal table which has same structure as file
DATA:wa_file TYPE x_struct.                          "work area which has same structure as file
DATA: it_excel TYPE STANDARD TABLE OF alsmex_tabline,
      wa_excel TYPE alsmex_tabline.
DATA: x_ctuprms TYPE ctu_params.
DATA:nodata TYPE c VALUE '/'.
data:con(50) type c.
data:con1(50) type c.
*selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Enter file name on presentation server
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*Function which enables the user to browse the files on hard disk
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      program_name = syst-repid
      static        = 'X'
    CHANGING
      file_name     = p_file
    EXCEPTIONS
      mask_too_long = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
START-OF-SELECTION.
*Subroutine to upload excel file and read it
PERFORM upload.
*Subroutine to upload supply area data
PERFORM fill.
*&      Form bdc_dynpro
      Fill the BDC table
FORM bdc_dynpro USING program dynpro.                       "#EC *
CLEAR wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro   = dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form bdc_field
       Fill the BDC table
FORM bdc_field USING fnam fval.                             "#EC *
IF fval <> nodata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = fnam.
    wa_bdcdata-fval = fval.
    APPEND wa_bdcdata TO it_bdcdata.                        "#EC
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form collect_messages
      Collect the messages from transaction
FORM collect_messages .                                     "#EC *
DATA: w_msg(100).
LOOP AT it_msgtab INTO wa_msgtab.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = wa_msgtab-msgid
        lang      = wa_msgtab-msgspra
        no        = wa_msgtab-msgnr
        v1        = wa_msgtab-msgv1
        v2        = wa_msgtab-msgv2
      IMPORTING
        msg       = w_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CONDENSE w_msg.
    CLEAR wa_messages.
    wa_messages-msgtyp = wa_msgtab-msgtyp.
    wa_messages-message = w_msg.
    wa_messages-werks = wa_file-werks.
    wa_messages-prvbe = wa_file-prvbe.
if wa_messages-message eq 'Formatting error in the field V_PVBE-RGVER; see next message'.
wa_messages-message = 'Invalid name of the person responsible'.
endif.
if wa_messages-message eq 'Formatting error in the field V_PVBE-LGORT; see next message'.
wa_messages-message = 'Enter the storage location'.
endif.
    APPEND wa_messages TO it_messages .
ENDLOOP.
REFRESH it_msgtab.
ENDFORM.                    "collect_messages
*&      Form write_messages
      Display the messages
FORM write_messages .
DELETE ADJACENT DUPLICATES FROM it_messages COMPARING werks prvbe.
LOOP AT it_messages INTO wa_messages .
    WRITE:/1 sy-vline.
    IF wa_messages-msgtyp = 'S'.
      WRITE: 10 icon_green_light.
    ELSEIF wa_messages-msgtyp = 'E'.
      WRITE: 10 icon_red_light.
    ELSEIF wa_messages-msgtyp = 'W'.
      WRITE: 10 icon_yellow_light.
    ENDIF.
    WRITE: 20 sy-vline.
    WRITE : 30 'Plant-', wa_messages-werks .                "#EC NOTEXT
    WRITE: 48 sy-vline.
    WRITE : 49 'Supply Area-', wa_messages-prvbe .          "#EC NOTEXT
    WRITE: 79 sy-vline.
    WRITE : 80 wa_messages-message .
    WRITE: 180 sy-vline.
    WRITE:/1 sy-vline.
    ULINE 1(180).
ENDLOOP.
ENDFORM.                    " write_m
*&      Form fill_params
      Processing mode for the transaction
FORM fill_params .
x_ctuprms-dismode = 'N'.
x_ctuprms-updmode = 'A'.
x_ctuprms-defsize = 'X'.
ENDFORM.                    "fill_params
*&      Form upload
      Upload the excel file and read the data
FORM upload .
*Function to upload excel file
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_file
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 5
      i_end_row               = 9999
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR wa_file.
*Read the file row-wise
LOOP AT it_excel INTO wa_excel.
    CASE wa_excel-col .
*Read plant
      WHEN '1'.
        wa_file-werks = wa_excel-value.
*Read supply area
      WHEN '2'.
        wa_file-prvbe = wa_excel-value.
*Read decription
      WHEN '3'.
        wa_file-pvbtx = wa_excel-value.
*Read storage location
      WHEN '4'.
        wa_file-lgort = wa_excel-value.
*Read Person responsible
      WHEN '5'.
        IF STRLEN( wa_excel-value ) = 1.
          CONCATENATE '00' wa_excel-value INTO con.
          wa_file-rgver = con.
        ELSEIF STRLEN( wa_excel-value ) = 2.
          CONCATENATE '0' wa_excel-value INTO con1.
          wa_file-rgver = con1.
        ELSE.
          wa_file-rgver = wa_excel-value.
        ENDIF.
    ENDCASE.
    AT END OF row.
      CONDENSE:wa_file-werks,wa_file-prvbe,wa_file-pvbtx,wa_file-lgort,wa_file-rgver.
      APPEND wa_file TO it_file.
      CLEAR wa_file.
    ENDAT .
ENDLOOP.
ENDFORM.                    " upload
*&      Form fill
      Call the transaction 'PK05'
FORM fill .
*Upload the data through transaction 'PK05'
PERFORM fill_params.
LOOP AT it_file INTO wa_file.
    PERFORM bdc_dynpro      USING 'SAPLSVIX' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'D0100_FIELD_TAB-LOWER_LIMIT(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=OKAY'.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0020'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-PVBTX(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=NEWL'.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-RGVER'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                  wa_file-werks.
    PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                  wa_file-prvbe.
    PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                  wa_file-pvbtx.
    PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                  wa_file-lgort.
    PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                  wa_file-rgver.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-WERKS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                  wa_file-werks.
    PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                  wa_file-prvbe.
    PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                  wa_file-pvbtx.
    PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                  wa_file-lgort.
    PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                  wa_file-rgver.
    CALL TRANSACTION 'PK05'
                       USING it_bdcdata
                       OPTIONS FROM x_ctuprms
                       MESSAGES INTO it_msgtab.
    REFRESH it_bdcdata.
    PERFORM collect_messages.
    CLEAR wa_file.
ENDLOOP.
PERFORM write_messages.
ENDFORM.                    " fill

C2-01 how to switch off mobile data

I bought the C2-01 as a simple no-nonsense phone but it is driving me up the wall at the moment because I am unable to permanently disable it from accidentally using costly data when fat figures hit the internet, OVI, facebook etc buttons.
I have checked out other appropriate messages and have already tried the following.
handset is using the latest software
under connectivity- packet data conn. settings I have set it as 'when needed', although the fact that it does not have a 'never connect' or 'disable' option is a serious omission in my opinion.
under configuration I have set up all the relevant dummy personal configuration settings and dummy preferred access points as default settings.
In spite of this whenever I test the internet connection or Ovi applications, it still connects over the mobile data network using costly data.
Please help, there must be a way to permanently disable mobile data use.

@bigbruv
Presumably you have already seen this post and tried following it to the letter?
http://discussions.nokia.com/t5/Cseries/Disabling-internet-access-on-C2-01/m-p/1376541/highlight/tru...
Happy to have helped forum with a Support Ratio = 42.5

Howto block mobile data from 3720?

I'm using 3720 as emergency/backup phone and my subscription does not include mobile data, which is then very expensive.
Is there any way to block gprs data usage from the phone?
Solved!
Go to Solution.

Hi toke_lahti
Thank you for posting!
General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity >Packet data > Packet data conn. > Select When needed.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Consumo traffico dati con wi-fi acceso

Similar Messages

Maybe you are looking for