Consumption Mode not maintained in MRP3

Hi All,
How will the system react if the consumption mode is not maintained in MRP3? Is there a order priority on how/where the system will look for consumption mode?
Thanks for your time.

Dear,
The parameters maintained in the material master (material requirements planning view 3) have the highest priority. If you do not specify a consumption mode, the system uses the consumption parameters from the MRP group that is assigned to the material. If a consumption mode is not specified there, the consumption mode is set to '1' by default (backward consumption only) with a (backward) consumption period of 999 days. This means that the consumption cannot be deactivated because the consumption parameters have not been maintained. The consumption periods are calculated in workdays.
Please refer the OSS Note 772856 - FAQ: Consumption of planned independent requirements
Regards,
R.Brahmankar

Similar Messages

Consumption mode settings

Hi,
Please suggest me for my following scenario.
Iam doing weekly planning for my material which should get consume by sales order, say I maintained PIR for week W1 20, W2 30. whenever sales order comes for qty up to 20 it is consuming W1 PIR but whenever sales order qty is more than 20, second week PIRs are getting consume which I do not want. Is there any way to restrict it.
I did not maintained anything in consumption mode field, and I tried with 2, 1, 1 also. I have checked consumption mode settings in SPRO where I maintained 0 for plant.
How to stop consuming next week PIRs.

Changed MRP group settings.

Nokia 2520 with keyboard in consumption mode

I am a new owner of an AT&T Lumia 2520 with the power keyboard. I have noticed that when I am "consumption mode" and using Metro apps the on screen keyboard does not pop up. The only way to do this is to disconnect the power keyboard entirely and the things work as expected. I can also bring up the keyboard from the charms bar, but this is not optimal. Will there be an update coming to resolve this issue?

Hi,
Sorry If the flight mode is active, it informs " Unable to use when flight profile is active" when try to choose WLAN.
All active connections ended by activating the flight mode.
Br
Mahayv

Consumption Mode in MRP using reservations

Hi Gurus,
I am try to use the consumption mode found in the MRP setting if SAP.
My scenario is as follows:
1) Did a forecast of a material for 3 months
2) Created a Reservation between does 3 months
Problem:
1) No compensation was made to any of the forecasted quantities (i.e if forcasted quatities was 100- and the reservation was 20-, the forecasted model remained 100- and a reservation of 20- came up when MRP was run)
Expected Results:
1) Forecasted quantity 80- and reservation 20-, i.e. total 100- not 120-
Any ideas,
Thanks,
John.

Dear Uday,
Your question is related to delivery date proposed in the Sales Order processing. This has nothing to do with the consumption mode in the material master. Instead the delivery dates are proposed as per total replen lead time and inhouse prod time from MRP views.
Regards,
Ashish

Material GTS-14003X not maintained by Purchasing

1. How can i correct this error "Material GTS-14003X not maintained by Purchasing".
2. Also during material creation(MM01), many views are there for a combination of material type and industry sector.But during creation i select few views but did not select, say Purchasing view. Now in Chage mode during MM02 if I want to have purchasing view also, then how can i do that?
Pls help.
Kind Regards
Sajid.

Dear,
You need to slect it in MM01 so go to MM01 enter materail GTS-14003X then select the purchasing vie and maintain it.
Regards,
R.Brahmankar

Merging/Flattening Layers with different blending modes and maintaining the visual appearance

Hello,
I see there are many others that are having the same problem as me. And alas, it doesn't seem like the problem has been solved or very understood for that matter.
I want to be able to take a document, that has multiple layers, inside of multiple groups with various layers having various blending modes applied to them and from within that document, select simply two of those layers, one with a Divide blending mode and the other layer Normal, merge those two layers, but have the visual appearance of the merged layer maintain the visual appearance of what the layers looked like before I merged them.
Everytime I attempt this, Ps takes my Divide layer, reverts it back to Normal and then merges the layers, thus changing the appearance of what it was before the merge. This is not the desired result.
I understand that when you flatten an entire series of layers, it applies all the blending modes and maintains the visual appearance. Is there a way to do this with just two layers instead of all the layers? If so, that would be great information. If not, why not?
Thank you
Jake

Short answer: No.
A "layer" with a specific blending mode implies a sequence of math operations on a given pixel. Think of the visible pixel R, G, and B values as the result of a potentially complex math formula that combines numbers from each layer in complex ways (those ways being defined by the blending mode you've chosen). You can't always simplify particular factors of your choosing in a given math formula.
The next step is to examine why you would want to do so. Perhaps there's a more direct way to achieve your goal that would avert the need entirely.
Another possibility, if the effect of several layers together is something you'd like to manipulate as a unit, is to Group the layers.
-Noel

Consumption Mode in MRP

Hi Gurus,
I am try to use the consumption mode found in the MRP setting if SAP.
My scenario is as follows:
1) Did a forecast of a material for 3 months
2) Created a Reservation between does 3 months
Problem:
1) No compensation was made to any of the forecasted quantities (i.e if forcasted quatities was 100- and the reservation was 20-, the forecasted model remained 100- and a reservation of 20- came up when MRP was run)
Expected Results:
1) Forecasted quantity 80- and reservation 20-, i.e. total 100- not 120-
Any ideas,
Thanks,
John.

Dear Uday,
Your question is related to delivery date proposed in the Sales Order processing. This has nothing to do with the consumption mode in the material master. Instead the delivery dates are proposed as per total replen lead time and inhouse prod time from MRP views.
Regards,
Ashish

Catalyst 2960 POE Switch Consumption Mode

Hi,
I'm curious how I can configure a 2960 to function in POE consumption mode. I know with other switches you can explicitly configure them to only give devices the power they consume and not power based on what class the belong to.
I have read that the following command should do what I need:
power inline consumption wattage
...although I would have thought I wouldn't need to specify the wattage if I wanted the device to tell the switch how much power it needs.
Thanks

Hi,
The "power inline consumption" command is a global config that applies to the entire switch to override the default:
from the command reference guide
Use the power inline consumption global or interface configuration command on the switch stack or on a standalone switch to override the amount of power specified by the IEEE classification for the device by specifying the wattage used by each powered device. Use the no form of this command to return to the default power setting.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750e_3560e/software/release/12-2_44_se/command/reference/cr1/cli1.html#wp8821622
HTH

Reg: Consumption Mode in Material Master.

Hi,
I am using Function Module u2018BAPI_PRDSRVAPS_GETLIST2u2019 to fetch the Material details from the Product Master, I am able to fetch all the details but Consumption Mode which is located in the Demand profile tab is not getting fetched even though value is present in the Product Master.
Thanks in Advance
Vikram

Hi,
Have no suggestion to make the BAPI return consumption related values. Too many structures in the BAPI to explore
But if it returns RQMID you can pass it through table /SAPAPO/MATRQ and read the consumption relavent parameters.
Regards,
Ashok

Control Center II on MSI H67ma-e35 (b3) does not maintain a preset

hello guys,
as announced in the title
on my mother board H67 (actually on the other mobo 1155 that I own I have yet to install it), the CC II does not maintain the Green Power Genie preset...
or, I imposed at 75% but the next reboot, it always returns to Auto mode ..
Bios is set active to 75% too,
and I do not understand why it does not align to the same value by software ..

Quote from: HU16E on 22-June-12, 17:46:57
Sometimes software and utilities that run in Windows have a glitch or two. That is why many of us do all the setting changes in the BIOS manually.
for example on my great MSI P45 Diamond, the dual core center produces the "debug assertion failed" erroy almost every day....
in this case I learned that I click "ignore" and I continue my work

Bean State is not maintained in producer

Hi,
In my application, whenever we click on the 'Add' button, document is added to bean and page is submited again and the same apge is displayed. For e.g, I have employeeDetails.xhtml apge and whenver I add any document, document is added to Bean, and employeeDetails.xhtml page is shown again. but now in portal, employeeDetails apge after adding docuemnt is throwing exception. the reason which we found out is that, bean state is not meintained and due to which RenderRequest reinitializes the bean and all saved data is lost.
Can you pelase help on this?

In Create Mode od material Master: MM01 Enter the material code & enter the same in Reference material & enter. In the next step select Purchasing, as it refers to not have maintained & enter Organization data & enter. Now maintain Purchasing Tab page.
This process in SAP is known as Extending Material Master. You can extend the material master for adding Views not maintained, also for extending material to another plant or combination of Sales Org & Distribution Channel, & so on ...
Hope this resolves your issue.
Regards,
Rajesh Banka

Valuatin type not maintained

Dear Experts,
I am creating a po,the material is domestic spares excisable i.eDOM-S(E).valuation categarised as H.while saving purchase prder the system is displaying warning message as "valuation data for material xxxxxxxxx valuation type DOM-S(E) not maintained.why message is showing.what i can do ,to rectify the warning.please answer it.
Regards,
Ramakrishna

Hi,
Just check the material in the display mode T Code MM03, whether any Valuation type is maintained for this material . Check the valuation class/Price control/Procurement type also. Eg If it is Raw material then whatever valuation type defined in your company has to be given and procurement type -External has to be selected. After getting the correct valuation type u can go to T Code. MM01 and put the same material . Then it will ask for plant , storage location , valuation type , u can just put the particular valuation type. Select the views u want to maintain and then keep on entering and save it.
Go to PO , same valuation type has to be given..it will show a 'X' mark against that particular valuation type if u press F4. (Eg. x - Lcxin where Lcxin is valuatiopn type)
If its not appearing that means its still not assigned to that material . Then u have to again check in MM03.
resgards,
somu c

Consumption modes

Hi All,
Can anybody explain me with the examples to differentiate between Forward ,backward and backward forward consumption modes..
Thanks

Hi Kathik,
As explained by Karthi It deals with the consumptions of PIR by your actual demand(SO).
For example you have a material A & you have entered a planned demand (PIR)
say 100 units for July, 100 units for Aug, 200 units for Sept
Now if you have a SO for 150 for Aug & you have backward consumption mentioned, then the SO
consumes you Aug requirement first ie 100 is consumed, then for the balance 50 it searches
backwards & reduces the PIR for july.
With Forward scheduling the opposite happens. ie your requirements from Sept are consumed first.
when you have both ie backward / forward
you have a requirement for say 250 first your requirements for Aug & July are consumed ie 200 units are consumed, for the
balance 50 it shifts to forward & consumes 50 units form the PIR for Sept.
for Forward/backward
the consumption starts from Sept ie 200units from Sept is consumed & for balance 50 its switches
to backward & as Aug is the first requirement it encounters it consumes 50 units from Aug.
To control the span of time(ie how long back or how long into the future) your PIR needs to be consumed
you use the consumption period. PIR's beyond this period are not considered.
Tried to put it in short.
Hope i have been clear,
may be you can also check the link on SAP help.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm

MacBook Mini-DVI to VGA - Samsung 32" LCD - Mode Not Supported

I followed the instructions on Apple's site to use the MacBook with the lid closed and an external LCD. It worked perfectly the first time I tried it. (I believe in 1920 x 1024). It seemed a little hard to read so I changed the Display resolution, then encountered the "Mode Not Supported" on my LCD. I unhooked and used my MacBook to change the settings back, but the MacBook seems to revert to the "Mode Not Supported" resolution when I close the lid. Any suggestions? Can I reset the Display Preferences on my MacBook?

I think this procedure should work, but it requires an external USB keyboard.
- Shut down the Mac.
- Have all the following connected:
- MacBook power supply
- External display
- USB keyboard and mouse
- Open the lid on the MacBook and hit the power button.
- Immediately close the lid on the MacBook and start holding down the Shift key on the USB keyboard.
- Release the Shift key once you see the spinning gear on the gray screen on the external display.
The above procedure should cause the Mac to start in Safe mode and hopefully will finish booting into a useable screen. If that is the case, go into Displays preferences and select a known working resolution different from the one the Mac started up in under Safe mode. Now restart normally. Hopefully the newly selected resolution will persist through the normal restart and you will have a working external screen again.

Mid 2010 Macbook Pro to a Samsung Tv. (Mode not supported)

Hi, I have a macbook pro mid 2010, when connected to an external tv, i get the mirroring option, however when i uncheck the mirroring option (cause i need 2 desktops screen instead of one), my external monitor shows " Mode not supported ". I have a samsung LCD TV. It works perfectly with mirroring option, but I don't want a mirroring option..... Can anyone help?

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Consumption Mode not maintained in MRP3

Similar Messages

Maybe you are looking for