Consumption of PIR by stock transfer orders

Dear All,
Is it possible to consume PIR by Stock transfer orders? Consumption indicators doesnt show any such setting available.
Regards,
SAP CONS

Dear SAP cons
You need to activate  BAdI MD_PIR_FLEX_CONS  and in OMP6 change consumption indicator to 4
Also ur mixed MRP indicator should be 1. Then only ur PIRs will be consumed by STO.
Also while giving MD61, in user parameters the consumption indicator should be 4
Regards,
Sameer
Edited by: sameer PP on Jun 30, 2009 11:03 AM
Edited by: sameer PP on Jun 30, 2009 11:04 AM

Similar Messages

  • Stock Transfer order & PIR

    I am using strategy 10 and sales order is consuming PIR but stock transfer order is not consuming PIR.
    Do I need to maintain any settings in customization.
    thnks
    SD

    Dear ,
    Why STO should consume PIR when you are using Stratgey 10 ?
    However, PIR is still at planning level. STO is stock transfer after finishin the production.
    The only way to consume PIR by stock transfer is maintain minimum stock levels in warehouse and do the gross requirments planning. However, the STO is not directly consumed.
    Basically , it is nothing but your requirement  and depends on the stratgey you defined in MRP3.
    Consuming the PIR, it is fully depends on strategy what you have used in material master of FERT.
    If used 40, sale order will consume PIR.
    For 10, when goods delivery PIR will erase.
    For 11, when goods receipt.
    For 20 , no PIR.
    For Stock transport purpose we are not creating any PIR.
    Hope this is clear
    regards
    JH

  • Planning Strategies 10 and 40 with Stock Transfer Orders for consuming PIRs

    Hello,
    I have the following situation in a Client:
    One Production Plant (1000)
    There exist various Plants  to sell products.
    The production Plan (PIRs) I create in Plant 1000 (MD61). Monthly buckets.
    The planiing strategy I want to use is 40  or maybe 10 (both to Stock).
    Consumption of the materials in plant 1000 is via:
    1. Stock transfer orders to other plants (with Shipping funcionality)   (about 80% of the shipping form plant 1000)
    2. Sales Ordes with shipping   (10%)
    3. Transfer postings from one plant to another (303 - 305 movement type) (10%)
    How can I make sure that all these outgoing movements from plant 1000 do consume my forecast? Is this standard funcionality.
    Thanks for any reply,
    Aart

    Hello Mario,
    Thanks for your answer. I looked at the note but Im not sure it does apply in our situation.
    Let me explain our situation maybe more clearly:
    I want to create a monthly Forecast (MD61) with PIRs for Production Plant 1000. (Planining strategy 10)
    The stock created in plant 1000, on the basis of this forecast is consumed during the month by:
    1. Stock Transfer Orders (from plant 1000 to plant X) - (for 95%)
    2. Sales orders (directly) (5%)
    The STOs should not be on top of the PIR but should be part of the PIR.
    For your information, the stock which is moved from plant 1000 to plant X via STOs, is sold at plant X (not directly at plant 1000).
    this stock sold monthly at plant X however, is considered withing the forecast!
    I hope this clarifies  our situation a bit more.
    Thanks for any anwer,
    Bye
    Aart

  • Consuming Forecast PIR (MD61) with Stock transfer Orders

    Hello,
    We have a Production Plant 1000 in which we load the sales forecast as PIRs (MD61) (we use strategy 10)
    We sell from Plant 1xxx.
    After production in plant 1000, we use Stock Transfer Orders to transfer the production stock to Plant 1xxx
    From plant 1xxx we ship to out customer (normal sales process with shipping).
    The problem we are facing is the following:
    The stock Transfer Orders (STO)during a month do NOT consume the forecast loaded in plant 1000! There is no asignment to PIRs!
    If I create a regular sales order in plant 1000 (which is not our normal process!), the Sales order quantity is automatically asigned to the PIRs to consume the forecast.
    The same thing we want to acomplish with STOs.
    I looked at Requirements Type  KSL with Requirements Class 030 (from the strategy 10) but I can not make out were to manipulate it so it will work in our specific situation.
    Anyone has done this before or had a similar situation? How did they solve it?
    Thanks for any help on this one.
    Aart

    Aart,
    I would assume your STO is created in plant 1XXX. So that would create a dependent requirement/reservation on plant1000.
    Since PIR is in plant 1000, it should consume your PIR by using consumption indicator 3 (Consume customer reqmts, reserv., dependent reqmts).
    You may not have to use consumption ind 4 ( using BADI). Hope this helps too.
    Else Brahmankar's solution is the last resort.
    Thanks,
    Ram

  • Sp.Procurement  key  40 stock transfer order.

    Hi Friends,
    I am facing typical probelm in post go live stage of the project .
    Scenario : 2 plants say 'A ' & 'B'  both are producing product 'x'. this product contains dependent componenets 'y' it is onle produced in plant A.
    Hence sp.procurement key 40 (stock transfer order) is maintained in plant B for component y .
    MRP  runs monthly once.
    Storage location stock excluded from MRP run
    Pur req cretaed in in nplant B and planned order in palnt A.
    Pur req converted in to  number Purchase orders (PO items) partialy.daily arround 20 Purchase orders are created,
    Now th problem is while carring out MRP  run for next month system considers the open PO items while caluclating requiremnt of y
    My requirement is that system should not consider open  PO , it should give gross requiremnt of Y depending upon PIR ;s of x.
    Stratgey 11 is mainatined for x in both plants
    Regards
    Sandeep

    Hi
    You have to run total planning & configure scope of planning.
    accordingly run MRP not for single plant.
    Further please follow the following link which is self explanatory.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
    In the above link it is clearly explained as to what procure ment types to be maintained.
    Pl. follow the same.
    Also run MRP for scope of planning.
    Regards
    YMREDDY

  • Urgent Condition Tab Missing In  Stock Transfer Order

    Hi All ,
                When I a m creating Stock Transfer Order from One Plant In one Company Code to  Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
    How to get the Conditions tab, Do I have to do any Customization ?
    Please suggest me of how to go about .....
    Regards ,
    Sriram.

    Hi Srirama,
    Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
    In that case please proceed with the following configuration.
    This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
    For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
    you must specify the price schema to be used.
    Hope this will solve your problem.
    Regards,
    DilliB

  • Delivery Split in Stock transfer Order

    Hello gurus,
                        In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
    Regards
    Soumendu

    SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
    This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
    Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

  • Routing in Stock Transfer Order

    Hi,
    We are having SAP 4.7 & we have activated Transportation Routing process.
    Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
    We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
    Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
    Kindly revert back.
    Thanks in advance.
    Samir Bhatt

    Hi,
    this is one of the problems caused by an organisation structure that is not quite matching the "real world".
    In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
    If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
    If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
    So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
    Sorry if this is not much help to you but it should help you to understand why you are having a problem.
    Steve B

  • Error in stock transfer order

    Hi everyone,
    When I am doing MIGO ,In stock transfer order ,I am getting the following error,
    "Excise Invoice cannot be captured for RG1(Finished Goods) material".
    What should I do?
    Regards
    Prabudh

    Hi Prabudh,
    Can you come again with more details ?
    Are you doing STO from Manufacturing plant to selling Plant (Depot) ?
    Regards,
    Gaurav Raghav.

  • Stock Transfer Order Report

    Hi,
         How to develop a Stock Transfer Order report. I also want to track the cost of transfer from one plant to another. Plz help.

    Hi,
    First fetch the data from LTAK header table.   Based on this table you can
    get the line items from LTAP table.  You can have the list of all open TO's in this table.  Based on the Plant (Werks) you can fetch the data from EKPO for STO report.
    Reward if useful.....

  • Open Qty is not copied in Delivery for Stock Transfer Order

    Hi,
    In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
    When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
    In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
    The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
    If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
    Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
    Regards
    Vijay

    Dear Friend,
    If I can understand you clearly.
    to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
    In the Item requirement : Generally it is 202
    reward points if helpful,
    regards,
    Amlan

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

  • Capture Excise Invoice w.r.t Stock Transfer Order

    Hi all,
    Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
    right Now i'm follwing below Steps
    1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
    2. Issue Material to Receiving PLant using 351 Movement.
    3. Book the CVD Condition thru MIRO Transaction
    4. Capturing Excise Invoice w.r.t Stock Transfer Order.
    5. Receive the material in Plant( 101 Mvmt).
    I had Few Query at step 3 and 4.
    Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
    Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
    does that mean i have to first create the excise invoice in sending plant?
    if yes, how can i create pls provide step for this.
    this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
    Regards,
    Sheo Anand Singh

    Hi Anand,
    Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
    Hope this clarifies.
    Thanks,
    Viswanath

  • Proforma invoice not created for stock transfer order

    Hi Experts
    while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
         Technical data
             Tech. data details
              Client                                
              Group Number
              Sales Document Number                
              Item Number of the SD Document         000010
              Schedule Line Number                   0001
              Counter in Control Tables              00
              Message Identification                 00
              System Message Number                  001
              Output Type                            E
              Message Variable 01
              Message Variable 02
              Message Variable 03
              Message Variable 04
              Group Type                             F
    No biliing documents generated
    Please suggest.
    Thanks

    This explanation is not in detail and hence I am not clear about your configuration settings. 
    First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
    There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
    Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue.  Try in development client.
    thanks
    G. Lakshmipathi

  • Intercompany Stock transfer order with excise

    Hi,
    Can anyone  tell me about Intercompany Stock transfer order with excise step by step.
    hoping to replu

    Hello,
    Create Stock Transport Order - ME21N
    Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
    Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
    Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
    Regards
    Mahesh Naik

Maybe you are looking for